summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-05-12cxgb4vf: Check if rx checksum offload is enabled, while reading hardware ↵Hariprasad Shenai1-3/+4
calculated checksum Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4: Check if rx checksum offload is enabled, while reading hardware ↵Hariprasad Shenai1-3/+3
calculated checksum Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12cxgb4: Decode the firmware port and module type a bit more for ethtoolHariprasad Shenai1-4/+11
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Add support for netvsc build without CONFIG_SYSFS flagHaiyang Zhang1-4/+1
This change ensures the driver can be built successfully without the CONFIG_SYSFS flag. MS-TFS: 182270 Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09mdio_bus: fix devm_mdiobus_alloc_size exportArnd Bergmann1-1/+1
commit 6d48f44b7b2 "mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free" introduced a new function devm_mdiobus_alloc_size() but added an export for a different function devm_mdiobus_alloc(), which was obviously a simple mistake that leads to build error whenever this function is used from a loadable module: ERROR: "devm_mdiobus_alloc_size" [drivers/net/ethernet/ti/davinci_mdio.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09bonding: make a generic sysfs option store and fix commentsNikolay Aleksandrov3-491/+107
Introduce a generic option store function for sysfs and remove the specific ones. The attribute name is used to match against the option which is to be set. Also adjust the "name" of tlb_dynamic_lb option to match the sysfs entry and fix the comments and comment style in bond_sysfs.c The comments which showed obvious behaviour (i.e. behaviour that's seen in the option's entry) are removed, the ones that explained important points about the setting function have been moved above the respective set function in bond_options.c There's only 1 exception: num_unsol_na/num_grat_arp since it has 2 names CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: use MCCQ instead of MBOX in be_cmd_rss_config()Kalesh AP1-7/+10
be_cmd_rss_config() is called after the MCCQ is created; so this cmd is now modified to use the MCCQ instead of MBOX. Also fixed some indentation problem in this routine. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: include rx-compl error counter in ethtool statsKalesh AP1-0/+1
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: remove unused code in be_cmd_vlan_config()Kalesh AP3-10/+5
For putting interface into vlan promiscuous mode, we use be_cmd_rx_filter() and not be_cmd_vlan_config(). So remove the "promiscuous" argument from be_cmd_vlan_config(). Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: covert vlan array to bit-mapRavikumar Nelavelli2-11/+10
This patch converts the vlan u8[] used to track vlan-id membership to a bit-map as it reduces memory usage. Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: fix line wrap and function call indentation in be_ethtool.cSathya Perla1-58/+42
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Also removes unnecessary line wrap. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: fix function call indentation in be_cmds.cSathya Perla1-161/+179
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09be2net: fix line wrap and function call indentation in be_main.cSathya Perla1-103/+101
When a funtion definition or a function call spans more than one line, ensure that the first argument on the subsequent lines is aligned to the first column after the opening paranthesis of the function call. Also remove unnecessary line wrap. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09qlcnic: Update version to 5.3.59Rajesh Borundia1-2/+2
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09qlcnic: Collect firmware dump using DMA on 82xx adaptersShahed Shaikh5-50/+42
o Add support to collect RDMEM section of firmware dump using PEX DMA method. o This patch uses most of the code used for PEX DMA support on 83xx series adapters and some refactoring. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09qlcnic: Add mac learning support to SR-IOV VF.Rajesh Borundia6-28/+78
o SR-IOV VF can be uplinked to bridge/macvtap device. Enable mac learning to support communication through embedded switch. o Learn vlan filters based on QLCNIC_VLAN_FILTERING flag. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09qlcnic: Add support to process commands in atomic contextRajesh Borundia6-107/+99
o Commands from VF may sleep during PF-VF communication. Earlier we use to process qlcnic_sriov_vf_set_multi function in process context. Now individual commands that are called in atomic context are processed in process context without waiting for completion of command. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09qlcnic: Allow SR-IOV VF probe in hypervisor.Rajesh Borundia3-17/+24
o Add support for SR-IOV VF probe in hypervisor to enable assignment of VFs within hypervisor. o SR-IOV VF can be uplinked to bridge/macvtap device with this change. o Refactor SR-IOV enable/disable code. We cannot take rtnl lock while enabling/disabling SR-IOV as VF probe will take an rtnl lock. o Disable spoofchk by default. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08mellanox: Logging message cleanupsJoe Perches26-437/+352
Use a more current logging style. o Coalesce formats o Add missing spaces for coalesced formats o Align arguments for modified formats o Add missing newlines for some logging messages o Use DRV_NAME as part of format instead of %s, DRV_NAME to reduce overall text. o Use ..., ##__VA_ARGS__ instead of args... in macros o Correct a few format typos o Use a single line message where appropriate Signed-off-by: Joe Perches <joe@perches.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08bonding: remove the unused macrodingtianhong1-2/+0
Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08bonding: simplify the slave_do_arp_validate_only()dingtianhong2-4/+3
The argument slave is not used for slave_do_arp_validate_only(), so no need to keep it, make the function more simple. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08bonding: remove the unnecessary struct bond_netdingtianhong1-10/+8
Move the structure bond_net forward, and remove the unnecessary structure declaration. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07qlcnic: Fix Kconfig dependency on HWMONHarish Patil1-1/+1
Commit 1f0f467b670e "qlcnic: Add hwmon interface to export board temperature" introduced a randconfig build error in the case when the hwmon framework is built as a module and the qlcnic driver itself is built-in: drivers/built-in.o: In function `qlcnic_register_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1301: undefined reference to `hwmon_device_register_with_groups' drivers/built-in.o: In function `qlcnic_unregister_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1309: undefined reference to `hwmon_device_unregister'. This changes the Kconfig logic to enforce that the qlcnic hwmon support can only be enabled if it is possible to successfully build it. Signed-off-by: Harish Patil <harish.patil@qlogic.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07ARM: i.MX6: Add OF configuration support for ksz9031Hubert Chaumette1-1/+105
Adds support for ksz9031 PAD skew configuration over devicetree. Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07isdn: hisax: remove some dead codeDan Carpenter1-107/+4
The HISAX_HFC4S8S_PCIMEM code hasn't been able to compile since before the start of git history. I have deleted it. There are also a few indenting mistakes where one side of the ifdef wasn't indented correctly which I fixed as well. Reported-by: Walter Harms <wharms@bfs.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07w83977af_ir: remove two faux Kconfig macrosPaul Bolle1-29/+4
Ever since v2.3.5 the driver for "Winbond W83977AF (IR)" contains two unneeded preprocessor macros. CONFIG_NETWINDER_TX_DMA_PROBLEMS is never defined and can safely be removed. And CONFIG_NETWINDER_RX_DMA_PROBLEMS is just an alias for CONFIG_ARCH_NETWINDER, so that (valid) Kconfig macro can be used instead. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: via-rhine: Convert #ifdef USE_MMIO to a runtime flagAlexey Charkov1-47/+55
This introduces another flag in 'quirks' to replace the preprocessor define (USE_MMIO) used to indicate whether the device needs a separate enable routine to operate in MMIO mode. All of the currently known platform Rhine cores operate in MMIO mode by default, and on PCI it is preferred over PIO for performance reasons. However, a comment in code suggests that some (?) early Rhine cores only work in PIO mode, so they should not be switched to MMIO. Enabling MMIO on PCI is still triggered by the same Kconfig option to avoid breaking user configs needlessly, but this can be changed going forward towards automatic runtime detection in case a list of PIO-only Rhine revisions can be compiled. This also fixes a couple of compiler warnings detected by Fengguang Wu's test bot (!USE_MMIO case): drivers/net/ethernet/via/via-rhine.c: In function 'rhine_init_one_pci': drivers/net/ethernet/via/via-rhine.c:1108:1: warning: label 'err_out_unmap' defined but not used [-Wunused-label] err_out_unmap: ^ drivers/net/ethernet/via/via-rhine.c:1022:6: warning: unused variable 'i' [-Wunused-variable] int i, rc; ^ drivers/net/ethernet/via/via-rhine.c:916:22: warning: 'quirks' may be used uninitialized in this function [-Wmaybe-uninitialized] phy_id = rp->quirks & rqIntPHY ? 1 : 0; ^ drivers/net/ethernet/via/via-rhine.c:1026:6: note: 'quirks' was declared here u32 quirks; ^ Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'for-davem' of ↵David S. Miller160-2452/+3731
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-05-02 Please pull this batch of updates intended for the 3.16 stream... For the mac80211 bits, Johannes says: "In this round we have a large number of small features and improvements from people too numerous to list here. The only really bit thing is Michał and Luca's CSA work (including changing how interface combination verification is done)." For the Bluetooth bits, Gustavo says: "Here goes some patches for the -next release. There is nothing really special for this pull request, just a bunch of refactors, fixes and clean ups." For the ath10k/ath6kl bits, Kalle says: "For ath6kl Kalle fixed a bunch of checkpatch warnings. In ath10k we had more changes, major ones being: * fix memory allocation failures after a firmware crash (Michal) * some rework of DFS configuration to enable it correctly in all cases (Michal) * add a new firmware crash option to make it possible to crash 10.1 firmware for testing purposes (Marek P) * fix RTS/CTS protection in certain cases (Marek K) * fix wrong RSSI and rate reporting in some cases (Janusz) * fix firmware stats reporting (Chun, Ben & Bartosz)" For the iwlwifi bits, Emmanuel says: "I have here a bunch of unrelated things. I disabled support for -7.ucode which means that I can removed a lot of code. Eliad has a brand new feature: we reduce the Tx power when the link allows - this reduces our power consumption. The regular changes in power and scan area. One interesting thing though is the patches from Johannes, we have now GRO which allows to increase our throughput in TCP Rx. The main advantage is that it reduces the number of TCP Acks - these TCP Acks are completely useless when we are using A-MPDU since the first packet of the A-MPDU generates a TCP Ack which is made obsolete by the next packets." Along with that, there are a variety of updates to b43, mwifiex, rtl8180 and wil6210 drivers and a handful of other updates here and there. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clkGeorge Cherian1-0/+16
cpsw_cpts_rft_clk has got the choice of 3 clocksources -dpll_core_m4_ck -dpll_core_m5_ck -dpll_disp_m2_ck By default dpll_core_m4_ck is selected, witn this as clock source the CPTS doesnot work properly. It gives clockcheck errors while running PTP. clockcheck: clock jumped backward or running slower than expected! By selecting dpll_core_m5_ck as the clocksource fixes this issue. In AM335x dpll_core_m5_ck is the default clocksource. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpsw: Enable Annexe F Time syncGeorge Cherian1-12/+37
Enable the Annex F Time Sync explicitly for DRA7x and AM4372. With this enabled the L2 PTP is working. while at that rename TS_BIT8 to TS_TTL_NONZERO Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372George Cherian1-2/+5
Enable cpts hardware time stamping for Dra7xx and AM4372. This enables PTPv2 for DRA7xx and AM4372. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05drivers: net: cpts: Remove hardcoded clock name for CPTSGeorge Cherian1-7/+4
CPTS refclk name is hardcoded, which makes it fail in case of DRA7x Remove the hardcoded clock name for CPTS refclk and get the same from DT. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: simplify IO memory mappingGrygorii Strashko1-18/+3
Simplify IO memory mapping by using devm_ioremap_resource() which will do all errors handling and reporting for us. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: drop pinctrl_pm_select_default_state from probeGrygorii Strashko1-3/+0
The "default" pinctrl state is set by Drivers core now before calling the driver's probe. Hence, it's safe to drop pinctrl_pm_select_default_state() call from Davinci mdio driver probe. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: davinci_mdio: use devm_* apiGrygorii Strashko1-19/+5
Use devm_* API for memory allocation and to get device's clock to simplify driver's code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_freeGrygorii Strashko1-0/+67
Add a resource managed devm_mdiobus_alloc[_size]()/devm_mdiobus_free() to automatically clean up MDIO bus alocations made by MDIO drivers, thus leading to simplified MDIO drivers code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: via-rhine: Drop revision property, use quirks insteadAlexey Charkov1-35/+42
This adds two new flags to quirks and thus removes the need to carry revision in rhine_private. As a result, the init logic is simplified a bit. This also fixes a compiler warning in OF code on 64bit due to pointer casting: drivers/net/ethernet/via/via-rhine.c: In function ‘rhine_init_one_platform’: drivers/net/ethernet/via/via-rhine.c:1132:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] revision = (u32)match->data; ^ That code was added in commit 2d283862dc62daead9db0dc89cd0d0351e91f765 ("net: via-rhine: add OF bus binding"). Tested in platform configuration on a VIA WM8950 APC Rock board. Reported-by: Jan Moskyto Matejka <mq@suse.cz> Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02Merge branch 'master' of ↵John W. Linville160-2452/+3731
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-04-30hyperv: Enable sendbuf mechanism on the send pathKY Srinivasan3-9/+234
We send packets using a copy-free mechanism (this is the Guest to Host transport via VMBUS). While this is obviously optimal for large packets, it may not be optimal for small packets. Hyper-V host supports a second mechanism for sending packets that is "copy based". We implement that mechanism in this patch. In this version of the patch I have addressed a comment from David Miller. With this patch (and all of the other offload and VRSS patches), we are now able to almost saturate a 10G interface between Linux VMs on Hyper-V on different hosts - close to 9 Gbps as measured via iperf. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: stmmac: set phy to use polling by defaultDinh Nguyen1-2/+5
mii_irq[] array is never initialized anywhere in the driver, thus mii_irq[] will always equate to zero. So, for the case where the PHY does not have an irq, we should use PHY_POLL for that situation. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Vince Bridgers <vbridger@altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30virtio-net: Set needed_headroom for virtio-net when VIRTIO_F_ANY_LAYOUT is trueZhangjie \(HZ\)1-0/+7
This is a small supplement for commit e7428e95a06fb516fac1308bd0e176e27c0b9287 ("virtio-net: put virtio-net header inline with data"). TCP packages have enough room to put virtio-net header in, but UDP packages do not. By setting dev->needed_headroom for virtio-net device, UDP packages could have enough room. For UDP packages, sk_buff is alloced in fun __ip_append_data. The size is "alloclen + hh_len + 15", and "hh_len = LL_RESERVED_SPACE(rt-dst.dev);". The Macro is defined as follows: #define LL_RESERVED_SPACE(dev) \ ((((dev)->hard_header_len+(dev)->needed_headroom)\ &~(HH_DATA_MOD - 1)) + HH_DATA_MOD) By default, for UDP packages, after skb is allocated, only 16 bytes reserved. And 2 bytes remained after mac header is set. That is not enough to put virtio-net header in. If we set dev->needed_headroom to 12 or 10 (according to mergeable_rx_bufs is on or off ), more room can be reserved. Then there is enough room for UDP packages to put the header in. test result list as below: guest and host: suse11sp3, netperf, intel 2.4GHz +-------+---------+---------+---------+---------+ | | old | new | +-------+---------+---------+---------+---------+ | UDP | Gbit/s | pps | Gbit/s | pps | | 64 | 0.57 | 692232 | 0.61 | 742420 | | 256 | 1.60 | 686860 | 1.71 | 733331 | | 512 | 2.92 | 674576 | 3.07 | 710446 | | 1024 | 4.99 | 598977 | 5.17 | 620821 | | 1460 | 5.68 | 483757 | 7.16 | 610519 | | 4096 | 6.98 | 637468 | 7.21 | 658471 | +-------+---------+---------+---------+---------+ Signed-off-by: Zhang Jie <zhangjie14@huawei.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: dsa: update DSA drivers to use ds_to_privFlorian Fainelli3-9/+9
Use the helper function to retrieve the driver private context instead of using (void *)(ds + 1). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30rsi: Changing opcode for sta mode according to changes in firmwareJahnavi Meher2-2/+3
Signed-off-by: Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: fix worse EVM for 11b ratesRajkumar Manoharan2-6/+6
Adjust FIR filter co-efficients to improve EVM for 11b rates. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath9k_hw: update ar9300 initvalsRajkumar Manoharan5-5/+5
* rfsat gainchange hysteresis of rf_gain stuck with large interference present. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: N-PHY: complete radio 0x2056 setupRafał Miłecki1-5/+27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting.Nickolay Ledovskikh1-2/+2
I was reading ath5k power setting code and noticed typing error in ath5k_hw_txpower function. Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX register. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30iwlegacy: Convert /n to \nJoe Perches2-2/+2
Use a newline character appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30wlcore: fix usage of platform_device_add_data()Christian Engelmayer2-31/+20
Coverity CID 986698 reports leakage of struct wlcore_platdev_data in the probe functions of both the SPI/SDIO interfaces. The structure passed to platform_device_add_data() is dynamically allocated and only freed in the error paths, however, platform_device_add_data() adds a copy of the platform specific data to the device. Move the temporary struct that is kmemdup'ed to the stack. This issue exists since afb43e6d (wlcore: remove if_ops from platform_data). Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtlwifi: rtl8723be: disable MSI interrupts modeAdam Lee1-1/+1
94010fa0dd07e8b904e7c6b6589f15573008ab15 ("rtlwifi: add MSI interrupts mode support") introduced MSI interrupts mode support, which seemed safe enough with RTL8188EE and RTL8723BE as RealTek's testing results, but some users reported their RTL8188EE modules could not connect to any wireless network after the MSI mode was enabled by Ubuntu 14.04. So, let's fallback to pin-based mode until rtlwifi's MSI support get good compatibility. BugLink: https://bugs.launchpad.net/bugs/1310512 Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 00:15:05 +0000