summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-04-18sky2: Use seq_puts() in sky2_debug_show()Markus Elfring1-1/+1
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18skge: Adjust a null pointer check in skge_down()Markus Elfring1-1/+1
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "!skge->mem". Thus fix the affected source code place. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18skge: Use seq_puts() in skge_debug_show()Markus Elfring1-1/+1
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: pxa168_eth: Adjust four checks for null pointersMarkus Elfring1-4/+4
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: pxa168_eth: Use kcalloc() in two functionsMarkus Elfring1-4/+2
Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Adjust a null pointer check in mvpp2_egress_enable()Markus Elfring1-1/+1
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "txq->descs". Thus fix the affected source code place. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Rename a jump label in mvpp2_prs_vlan_add()Markus Elfring1-3/+2
Adjust jump labels according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Rename a jump label in mvpp2_prs_double_vlan_add()Markus Elfring1-4/+3
Adjust jump labels according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Rename a jump label in mvpp2_txq_init()Markus Elfring1-3/+2
Adjust jump labels according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Rename a jump label in mvpp2_tx_frag_process()Markus Elfring1-3/+2
Adjust jump labels according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Adjust three error messagesMarkus Elfring1-3/+3
Use the word "failed" in the string for three function calls. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Rename a jump label in two functionsMarkus Elfring1-9/+7
Adjust jump labels according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Fix a jump label position in mvpp2_rx()Markus Elfring1-1/+1
The script "checkpatch.pl" pointed out that labels should not be indented. Thus delete two horizontal tabs before the jump label "err_drop_frame" in the function "mvpp2_rx". Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve a size determination in two functionsMarkus Elfring1-2/+2
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve 27 size determinationsMarkus Elfring1-27/+27
Replace the specification of data structures by references to a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve another size determination in mvpp2_prs_default_init()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve another size determination in mvpp2_bm_init()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve another size determination in mvpp2_port_probe()Markus Elfring1-2/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve another size determination in mvpp2_init()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Improve two size determinations in mvpp2_probe()Markus Elfring1-3/+3
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvpp2: Use kmalloc_array() in mvpp2_txq_init()Markus Elfring1-3/+3
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Adjust six checks for null pointersMarkus Elfring1-6/+6
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Use kmalloc_array() in mvneta_txq_init()Markus Elfring1-1/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Improve two size determinations in mvneta_init()Markus Elfring1-4/+2
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18net: mvneta: Use devm_kmalloc_array() in mvneta_init()Markus Elfring1-3/+5
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17bonding: deliver link-local packets with skb->dev set to link that packets ↵Chonggang Li1-0/+3
arrived on Bonding driver changes the skb->dev to the bonding-master before passing the packet to stack for further processing. This, however does not make sense for the link-local packets and it loses "the link info" once its skb->dev is changed to bonding-master. This patch changes this behavior for link-local packets by not changing the skb->dev to the bonding-master and maintaining it as it is, i.e. the link on which the packet arrived. Signed-off-by: Chonggang Li <chonggangli@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: rtnetlink: plumb extended ack to doit functionDavid Ahern1-2/+2
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: change netvsc device default duplex to FULLSimon Xiao1-1/+1
The netvsc device supports full duplex by default. This warnings in log from bonding device which did not like seeing UNKNOWN duplex. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17netvsc: fix RCU warning in get_statsstephen hemminger1-1/+1
The statistics functionis called with RTNL held during probe but with RCU held during access from /proc and elsewhere. This is safe so update the lockdep annotation. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: test the right variable in phy_write_mmd()Dan Carpenter1-1/+1
This is a copy and paste buglet. We meant to test for ->write_mmd but we test for ->read_mmd. Fixes: 1ee6b9bc6206 ("net: phy: make phy_(read|write)_mmd() generic MMD accessors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17Merge branch 'for-upstream' of ↵David S. Miller20-80/+4936
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-14 Here's the main batch of Bluetooth & 802.15.4 patches for the 4.12 kernel. - Many fixes to 6LoWPAN, in particular for BLE - New CA8210 IEEE 802.15.4 device driver (accounting for most of the lines of code added in this pull request) - Added Nokia Bluetooth (UART) HCI driver - Some serdev & TTY changes that are dependencies for the Nokia driver (with acks from relevant maintainers and an agreement that these come through the bluetooth tree) - Support for new Intel Bluetooth device - Various other minor cleanups/fixes here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: mvneta: fix failed to suspend if WOL is enabledJisheng Zhang1-1/+11
Recently, suspend/resume and WOL support are added into mvneta driver. If we enable WOL, then we get some error as below on Marvell BG4CT platforms during suspend: [ 184.149723] dpm_run_callback(): mdio_bus_suspend+0x0/0x50 returns -16 [ 184.149727] PM: Device f7b62004.mdio-mi:00 failed to suspend: error -16 -16 means -EBUSY, phy_suspend() will return -EBUSY if it finds the device has WOL enabled. We fix this issue by properly setting the netdev's power.can_wakeup and power.wakeup, i.e 1. in mvneta_mdio_probe(), call device_set_wakeup_capable() to set power.can_wakeup if the phy support WOL. 2. in mvneta_ethtool_set_wol(), call device_set_wakeup_enable() to set power.wakeup if WOL has been successfully enabled in phy. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: simplify phy_supported_speeds()Russell King1-10/+4
Simplify the loop in phy_supported_speeds(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: improve phylib correctness for non-autoneg settingsRussell King1-43/+66
phylib has some undesirable behaviour when forcing a link mode through ethtool. phylib uses this code: idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), features); to find an index in the settings table. phy_find_setting() starts at index 0, and scans upwards looking for an exact speed and duplex match. When it doesn't find it, it returns MAX_NUM_SETTINGS - 1, which is 10baseT-Half duplex. phy_find_valid() then scans from the point (and effectively only checks one entry) before bailing out, returning MAX_NUM_SETTINGS - 1. phy_sanitize_settings() then sets ->speed to SPEED_10 and ->duplex to DUPLEX_HALF whether or not 10baseT-Half is supported or not. This goes against all the comments against these functions, and 10baseT-Half may not even be supported by the hardware. Rework these functions, introducing a new method of scanning the table. There are two modes of lookup that phylib wants: exact, and inexact. - in exact mode, we return either an exact match or failure - in inexact mode, we return an exact match if it exists, a match at the highest speed that is not greater than the requested speed (ignoring duplex), or failing that, the lowest supported speed, or failure. The biggest difference is that we always check whether the entry is supported before further consideration, so all unsupported entries are not considered as candidates. This results in arguably saner behaviour, better matches the comments, and is probably what users would expect. This becomes important as ethernet speeds increase, PHYs exist which do not support the 10Mbit speeds, and half-duplex is likely to become obsolete - it's already not even an option on 10Gbit and faster links. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17qede: Add aRFS supportChopra, Manish3-5/+508
This patch adds support for aRFS for TCP and UDP protocols with IPv4/IPv6. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17qed: aRFS infrastructure supportChopra, Manish9-3/+504
This patch adds necessary APIs to interface with qede aRFS support in successive patch. It also reserves separate PTT entry for aRFS, [as being in fastpath flow] for hardware access instead of trying to acquire it at run time from the ptt pool. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17smsc95xx: Add comments to the registers definitionMartin Wetterwald2-214/+280
This chip is used by a lot of embedded devices and also by the Raspberry Pi 1, 2 & 3 which were created to promote the study of computer sciences. Students wanting to learn kernel / network device driver programming through those devices can only rely on the Linux kernel driver source to make their own. This commit adds a lot of comments to the registers definition to expand the register names. Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Martin Wetterwald <martin@wetterwald.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hw/mlx5: Add New bit to check over QP creationErez Shitrit1-0/+1
Add check for bit IB_QP_CREATE_NETIF_QP while creating QP. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: E-switch vport manager is valid for ethernet onlySaeed Mahameed1-2/+8
Currently the driver support only ethernet eswitch, and we want to protect downstream IPoIB netdev from trying to access it in IB link. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX handlerSaeed Mahameed3-0/+81
Implement IPoIB RX SKB handler. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: RX handlers per netdev profileSaeed Mahameed3-13/+24
In order to have different RX handler per profile, fix and refactor the current code to take the rx handler directly from the netdevice profile rather than computing it on runtime as it was done with the switchdev mode representor rx handler. This will also remove the current wrong assumption in mlx5e_alloc_rq code that mlx5e_priv->ppriv is of the type vport_rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Xmit flowSaeed Mahameed4-10/+100
Implement mlx5e's IPoIB SKB transmit using the helper functions provided by mlx5e ethernet tx flow, the only difference in the code between mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill (UD datagram segment) in the TX descriptor (WQE) and it doesn't need to have any vlan handling. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: Xmit flow break downSaeed Mahameed3-89/+119
Break current mlx5e xmit flow into smaller blocks (helper functions) in order to reuse them for IPoIB SKB transmission. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Underlay QPSaeed Mahameed1-2/+124
Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS and TX HW context to perform on IPoIB traffic. Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going through this QP when the ULP IPoIB decides to cleanup. Implement attach/detach mcast RDMA netdev callbacks for later RDMA netdev use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Basic netdev ndos open/closeSaeed Mahameed3-3/+93
Implement open/close of IPoIB netdevice ndos using mlx5e's channels API to manage data path resources (RQs/SQs/CQs). Set IPoIB netdev address on dev_init ndo. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, TX TIS creationSaeed Mahameed3-10/+26
Modify mlx5e tis creation function to accept underlay qp number, which will be needed by IPoIB. Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to create one TIS with the IPoIB underlay qp, for IPoIB TX SQs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RSS flow steering tablesSaeed Mahameed3-3/+54
Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering tables, but IPoIB do not require MAC and VLAN steering tables so the only tables we create in here are: 1. TTC Table (Traffic Type Classifier table for RSS steering) 2. ARFS Table (for accelerated RFS support) Creation of those tables is identical to mlx5e ethernet mode, hence the use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX steering RSS RQTs and TIRsSaeed Mahameed4-44/+83
Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation, All we do here is simply reuse the mlx5e implementation to create direct and indirect (RSS) steering HW objects. For that we just expose mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile callbacks. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Add netdevice profile skeletonSaeed Mahameed6-9/+249
Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c file with empty implementation. Downstream patches will provide the full mlx5 rdma netdevice acceleration support for IPoIB into this new file, by using the mlx5e netdevice profile and new mlx5_channels APIs and infrastructures. Same as already done in mlx5e NIC netdevice and switchdev mode VF representors. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: More generic netdev management APISaeed Mahameed3-91/+96
In preparation for mlx5e RDMA net_device support, here we generalize mlx5e_attach/detach in a way that those functions will be agnostic to link type. For that we move ethernet specific NIC net device logic out of those functions into {nic,rep}_{enable/disable} mlx5e NIC and representor profiles callbacks. Also some of the logic was moved only to NIC profile since it is not right to have this logic for representor net device (e.g. set port MTU). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-16 21:27:29 +0000