summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-16net: aquantia: Fix internal stats calculation on rxIgor Russkikh1-2/+2
skb len should be fetched before gro_receive - otherwise we may get wrong or even outdated skb data. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Prepend hw access functions declarations with prefixIgor Russkikh5-840/+922
Internal functions for registers and HW access were not prefixed. This introduce noise in global kernel symbols. Here we add explicit prefix 'hw_atl' to all the HW access layer functions. Alignment and styling were fixed as well. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Fix register definitions to linux styleIgor Russkikh3-1139/+1173
Original driver code had internal registers and masks declarations in low case and without any prefix. Here we make all these uppercase and add already used HW_ATL prefix to recognize these. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Eliminate aq_nic structure abstractionIgor Russkikh10-54/+46
aq_nic_s was hidden in aq_nic_internal.h, that made it difficult to access nic fields and structures from other modules. This change moves aq_nic_s struct into aq_nic.h and thus makes it available to other driver modules, mainly pci module and hw related module. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Simplify dependencies between pci modulesIgor Russkikh6-106/+113
Eliminate useless passing of net_device_ops and ethtools_ops through deep chain of calls. Move all pci related code into aq_pci_func module. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Add const qualifiers for hardware ops tablesIgor Russkikh14-20/+21
Hardware operations and capabilities tables are constants and never changed. Declare these as constants. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Remove duplicate hardware descriptors declarationsIgor Russkikh3-62/+31
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Cleanup hardware access modulesIgor Russkikh8-97/+71
Use direct aq_hw_s *self reference where possible Eliminate useless abstraction PHAL, duplicated structures definitions, Simplify nic config structure creation and management. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Cleanup status flags accessesIgor Russkikh9-17/+11
Usage of aq_obj_s structure is noop, here we remove it replacing access to flags filed directly. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Eliminate AQ_DIMOF, replace with ARRAY_SIZEIgor Russkikh5-6/+4
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: thunderx: add timestamping supportSunil Goutham9-6/+345
This adds timestamping support for both receive and transmit paths. On the receive side no filters are supported i.e either all pkts will get a timestamp appended infront of the packet or none. On the transmit side HW doesn't support timestamp insertion but only generates a separate CQE with transmitted packet's timestamp. Also HW supports only one packet at a time for timestamping on the transmit side. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: add support for Cavium PTP coprocessorRadoslaw Biernacki5-0/+437
This patch adds support for the Precision Time Protocol Clocks and Timestamping hardware found on Cavium ThunderX processors. Signed-off-by: Radoslaw Biernacki <rad@semihalf.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: spectrum: qdiscs: Make function mlxsw_sp_qdisc_prio_unoffload staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c:464:1: warning: symbol 'mlxsw_sp_qdisc_prio_unoffload' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: core: Add support for reloadArkadi Sharshevsky4-23/+65
Add support for hot reload. First, all the driver/core resources are released but the PCI and devlink instances, then reset is performed through the PCI interface. Finally the driver performs initialization. In case of reload failure the driver is left in a partially initialized state. Special care is taken during the driver removal in order to properly handle this state. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: pci: Add support for getting resource through devlinkArkadi Sharshevsky4-30/+92
Up until now the KVD partition was static. This patch introduces the ability to get the resource sizes via devlink. In case the resource is not available the default configuration is used. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: spectrum: Add support for getting kvdl occupancyArkadi Sharshevsky3-0/+36
Add support for getting the kvdl occupancy through the resource interface. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: spectrum_dpipe: Connect dpipe tables to resourcesArkadi Sharshevsky1-12/+69
Connect current dpipe tables to resources. The tables are connected in the following fashion: 1. IPv4 host -> KVD hash single 2. IPv6 host -> KVD hash double 3. Adjacency -> KVD linear Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: spectrum: Register KVD resources with devlinkArkadi Sharshevsky4-0/+205
Register the KVD resources with devlink. The KVD is a memory resource which is subdivided into three partitions which are the linear, hash single and hash double. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: pci: Add support for performing bus resetArkadi Sharshevsky2-13/+41
This is a preparation stage before introducing hot reload. During the reload process the ASIC should be resetted by accessing the PCI BAR due to unavailability of the mailbox/emad interfaces. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16phy: realtek: use new helpers for paged register accessHeiner Kallweit1-45/+14
Make use of the new helpers for paged register access. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16phy: use new helpers phy_set_bits/phy_clear_bits in phylibHeiner Kallweit1-2/+2
Use new helpers phy_set_bits / phy_clear_bits in phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Merge tag 'linux-can-next-for-4.16-20180105' of ↵David S. Miller7-17/+13
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-12-01,Re: pull-request: can-next this is a pull request of 7 patches for net-next/master. All patches are by me. Patch 6 is for the "can_raw" protocol and add error checking to the bind() function. All other patches clean up the coding style and remove unused parameters in various CAN drivers and infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15sh_eth: get Ether port # only when neededSergei Shtylyov1-8/+5
The dual-port Ether configurations always have a shared TSU to e.g. pass the packets between those ports. With the TSU init. code gathered under the single *if*, we now can only get the port # from 'platform_device::id' only when we actually need it (and not recalculate it each time)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15sh_eth: gather all TSU init code in one placeSergei Shtylyov1-7/+5
The sh_eth_cpu_data::chip_reset() method always resets using ARSTR and this register is always located at the start of the TSU register region. Therefore, we can only call this method if we know TSU is there and thus simplify the probing code a bit... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15Merge tag 'wireless-drivers-next-for-davem-2018-01-13' of ↵David S. Miller151-2148/+6838
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.16 Here are patches which have been accumulating over the holidays and after the New Year. Business as usual and nothing special really standing out. But what's noteworthy here is that Larry Finger is stepping down as the rtlwifi maintainer. He has been maintaining rtlwifi since it was applied back in 2010 in commit 0c8173385e54 ("rtl8192ce: Add new driver") and it has been no easy role trying to juggle between the vendor, demanding upstream community and users. So big thank you to Larry for all his efforts! ath10k * more preparation work for wcn3990 support * add memory dump to firmware coredump files wil6210 * support scheduled scan * support 40-bit DMA addresses qtnfmac * support MAC address based access control * support for radar detection and Channel Availibility Check (CAC) mwifiex * firmware coredump for usb devices rtlwifi * Larry Finger steps down as the maintainer and Ping-Ke Shih becomes the new maintainer * add debugfs interfaces to dump register and btcoex status, and also write registers and h2c ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: ethernet: Add a driver for Gemini gigabit ethernetLinus Walleij6-0/+3579
The Gemini ethernet has been around for years as an out-of-tree patch used with the NAS boxen and routers built on StorLink SL3512 and SL3516, later Storm Semiconductor, later Cortina Systems. These ASICs are still being deployed and brand new off-the-shelf systems using it can easily be acquired. The full name of the IP block is "Net Engine and Gigabit Ethernet MAC" commonly just called "GMAC". The hardware block contains a common TCP Offload Enginer (TOE) that can be used by both MACs. The current driver does not use it. Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: phy: remove parameter new_link from phy_mac_interrupt()Heiner Kallweit2-10/+7
I see two issues with parameter new_link: 1. It's not needed. See also phy_interrupt(), works w/o this parameter. phy_mac_interrupt sets the state to PHY_CHANGELINK and triggers the state machine which then calls phy_read_status. And phy_read_status updates the link state. 2. phy_mac_interrupt is used in interrupt context and getting the link state may sleep (at least when having to access the PHY registers via MDIO bus). So let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: dsa: lan9303: check error value from devm_gpiod_get_optional()Phil Reid1-4/+10
devm_gpiod_get_optional() can return an error in addition to a NULL ptr. Check for error and propagate that to the probe function. Check return value in probe. This will now handle EPROBE_DEFER for the reset gpio. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: dsa: lan9303: make lan9303_handle_reset() a void functionPhil Reid1-7/+3
lan9303_handle_reset never returns anything other than success. So there's not need for it to return an error code. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: phy: Have __phy_modify return 0 on successAndrew Lunn1-7/+6
__phy_modify would return the old value of the register before it was modified. Thus on success, it does not return 0, but a positive value. Thus functions using phy_modify, which is a wrapper around __phy_modify, can start returning > 0 on success, rather than 0. As a result, breakage has been noticed in various places, where 0 was assumed. Code inspection does not find any current location where the return of the old value is currently used. So have __phy_modify return 0 on success. When there is a real need for the old value, either a new accessor can be added, or an additional parameter passed. Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()") Fixes: 2b74e5be17d2 ("net: phy: add phy_modify() accessor") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14Merge branch '10GbE' of ↵David S. Miller20-256/+272
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-01-12 This series contains updates to ixgbe, fm10k and net core. Alex updates the driver to remove a duplicate MAC address check and verifies that we have not run out of resources to configure a MAC rule in our filter table. Also do not assume that dev->num_tc was populated and configured with the driver, since it can be configured via mqprio without any hardware coordination. Fixed the recording of stats for MACVLAN in ixgbe and fm10k instead of recording the receive queue on MACVLAN offloaded frames. When handling a MACVLAN offload, we should be stopping/starting traffic on our own queues instead of the upper devices transmit queues. Fixed possible race conditions with the MACVLAN cleanup with the interface cleanup on shutdown. With the recent fixes to ixgbe, we can cap the number of queues regardless of accel_priv being in use or not, since the actual number of queues are being reported via real_num_tx_queues. Tony fixes up the kernel documentation for ixgbe and ixgbevf to resolve warnings when W=1 is used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum: qdiscs: Support stats for PRIO qdiscNogah Frankel1-0/+89
Support basic stats for PRIO qdisc, which includes tx packets and bytes count, drops count and backlog size. The rest of the stats are irrelevant for this qdisc offload. Since backlog is not only incremental but reflecting momentary value, in case of a qdisc that stops being offloaded but is not destroyed, backlog value needs to be updated about the un-offloading. For that reason an unoffload function is being added to the ops struct. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum: qdiscs: Support PRIO qdisc offloadNogah Frankel3-0/+86
Add support for offloading PRIO qdisc as root qdisc. The support is for up to 8 bands. Routed packets priority is determined by the DSCP field with the default translations. Bridged packets priority is determined by the PCP field, if exist, otherwise it is set to 0. Since both options have only priorities 0-7, higher priorities mapping are being ignored. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum_router: Configure default routing priorityYuval Mintz1-0/+24
When routing ip packets, the kernel is setting the SKB's priority based on the tos field of the packet. Imitate this behavior in the mlxsw router, having the internal switch priority of a routed packet determined according to its DS field. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: reg: add rdpm registerYuval Mintz2-1/+38
Add rdpm definition - router DSCP to priority mapping register. This register will be utilized later to align the default mapping between packet DSCP and switch-priority to the kernel's mapping between packet priority and skb priority. This is the first non-bit indexed register where the entries are arranged in descending order, i.e., entry at offset 0 matches configuration for dscp[63]. As a result, the item's step is converted into a signed variable to support descending arrays [where step would be negative]. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: dsa: mv88e6xxx: Decode VTU problem interruptAndrew Lunn4-2/+90
When there is a problem with the VTU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: dsa: mv88e6xxx: Decode ATU problem interruptAndrew Lunn4-2/+103
When there is a problem with the ATU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum_router: Add support for IPv6 non-equal-cost multipathIdo Schimmel1-5/+8
Since commit eb789980d0aa ("mlxsw: spectrum_router: Populate adjacency entries according to weights") the driver includes support for non-equal-cost multipath, but IPv4 nexthops were the only user. Now that the kernel supports weighted IPv6 nexthops, we can extend the driver to support it as well. This is done by assigning each nexthop its configured weight, so that it will be populated accordingly in the device's adjacency table. The `weight` parameter is also taken into account when comparing nexthop groups in order not to consolidate non-identical groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: netsec: use dma_addr_t for storing dma addressArnd Bergmann1-7/+7
On targets that have different sizes for phys_addr_t and dma_addr_t, we get a type mismatch error: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_alloc_dring': drivers/net/ethernet/socionext/netsec.c:970:9: error: passing argument 3 of 'dma_zalloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The code is otherwise correct, as the address is never actually used as a physical address but only passed into a DMA register. For consistently, I'm changing the variable name as well, to clarify that this is a DMA address. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12ixgbevf: Fix kernel-doc format warningsTony Nguyen2-5/+18
Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve warnings when W=1 is used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Fix kernel-doc format warningsTony Nguyen12-39/+99
Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve warnings when W=1 is used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Fix handling of macvlan Tx offloadAlexander Duyck2-10/+14
This update makes it so that we report the actual number of Tx queues via real_num_tx_queues but are still restricted to RSS on only the first pool by setting num_tc equal to 1. Doing this locks us into only having the ability to setup XPS on the queues in that pool, and only those queues should be used for transmitting anything other than macvlan traffic. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: avoid bringing rings up/down as macvlans are added/removedAlexander Duyck2-58/+72
This change makes it so that instead of bringing rings up/down for various we just update the netdev pointer for the Rx ring and set or clear the MAC filter for the interface. By doing it this way we can avoid a number of races and issues in the code as things were getting messy with the macvlan clean-up racing with the interface clean-up to bring the rings down on shutdown. With this change we opt to leave the rings owned by the PF interface for both Tx and Rx and just direct the packets once they are received to the macvlan netdev. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Do not manipulate macvlan Tx queues when performing macvlan offloadAlexander Duyck2-108/+25
We should not be stopping/starting the upper devices Tx queues when handling a macvlan offload. Instead we should be stopping and starting traffic on our own queues. In order to prevent us from doing this I am updating the code so that we no longer change the queue configuration on the upper device, nor do we update the queue_index on our own device. Instead we can just use the queue index for our local device and not update the netdev in the case of the transmit rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan offloaded ↵Alexander Duyck2-10/+14
rings We shouldn't be recording the Rx queue on macvlan offloaded frames since the macvlan is normally brought up as a single queue device, and it will trigger warnings for RPS if we have recorded queue IDs larger than the "real_num_rx_queues" value recorded for the device. Instead we should be recording the macvlan statistics since we are bypassing the normal macvlan statistics that would have been generated by the receive path. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Don't assume dev->num_tc is equal to hardware TC configAlexander Duyck6-27/+29
The code throughout ixgbe was assuming that dev->num_tc was populated and configured with the driver, when in fact this can be configured via mqprio without any hardware coordination other than restricting us to the real number of Tx queues we advertise. Instead of handling things this way we need to keep a local copy of the number of TCs in use so that we don't accidentally pull in the TC configuration from mqprio when it is configured in software mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Default to 1 pool always being allocatedAlexander Duyck2-5/+3
We might as well configure the limit to default to 1 pool always for the interface. This accounts for the fact that the PF counts as 1 pool if SR-IOV is enabled, and in general we are always running in 1 pool mode when RSS or DCB is enabled as well, though we don't need to actually evaluate any of the VMDq features in those cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Assume provided MAC filter has been verified by macvlanAlexander Duyck1-4/+8
The macvlan driver itself will validate the MAC address that is configured for a given interface. There is no need for us to verify it again. Instead we should be checking to verify that we actually allocate the filter and have not run out of resources to configure a MAC rule in our filter table. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12net: hns3: check for NULL function pointer in hns3_nic_set_featuresJian Shen1-2/+4
It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add feature check when feature changedJian Shen1-12/+15
Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 07:31:36 +0000