summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-05-10Input: add support for PlayStation 1/2 joypads connected via SPITomohiro Yoshidomi3-0/+423
PlayStation 1/2 joypads can be connected directly to the SPI interface. Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer SabertoothBenjamin Valentin1-0/+2
Add USB IDs for two more Xbox 360 controllers. I found them in the pull requests for the xboxdrv userspace driver, which seems abandoned. Thanks to psychogony and mkaito for reporting the IDs there! Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - sync supported devices with xboxdrvBenjamin Valentin1-0/+13
The userspace xboxdrv driver [0] contains some USB IDs unknown to the kernel driver. I have created a simple script [1] to extract the missing devices and add them to xpad. A quick google search confirmed that all the new devices called Fightstick/pad are Arcade-type devices [2] where the MAP_TRIGGERS_TO_BUTTONS option should apply. There are some similar devices in the existing device table where this flag is not set, but I did refrain from changing those. [0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp [1] http://codepad.org/CHV98BNH [2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=isch Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-07Input: xpad - sort supported devices by USB IDBenjamin Valentin1-6/+6
Some entries in the table of supported devices are out of order. To not create a mess when adding new ones using a script, sort them first. Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-02Merge branch 'next' into for-linusDmitry Torokhov6228-138101/+322994
Prepare input updates for 4.12 merge window.
2017-05-01Input: ar1021_i2c - use BIT to check for a bitMartin Kepplinger1-1/+2
The MSB for the first byte of touch data transmission is always 1. Make it a little more obvious we're testing this bit by using BIT(7). Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: twl4030-pwrbutton - use input_set_capability() helperSebastian Reichel1-2/+1
Cleanup driver slightly by using input_set_capability() instead of manually setting the required bits. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: twl4030-pwrbutton - use correct device for irq requestSebastian Reichel1-1/+1
The interrupt should be requested for the platform device and not for the input device. Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-01Input: ar1021_i2c - enable touch mode during openMartin Kepplinger1-0/+15
The device could as well be in command mode, in which this driver cannot handle the device. When opening the device, let's make sure the device will be in the mode we expect it to be for this driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-24Input: i8042 - add Clevo P650RS to the i8042 reset listDmitry Torokhov1-0/+7
Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by: Paweł Bylica <chfast@gmail.com> Tested-by: Ed Bordin <edbordin@gmail.com> Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-19Input: xen-kbdfront - add module parameter for setting resolutionJuergen Gross1-25/+14
Add a parameter for setting the resolution of xen-kbdfront in order to be able to cope with a (virtual) frame buffer of arbitrary resolution. While at it remove the pointless second reading of parameters from Xenstore in the device connection phase: all parameters are available during device probing already and that is where they should be read. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18Input: elantech - add Fujitsu Lifebook E547 to force crc_enabledThorsten Leemhuis1-0/+8
Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Cc: stable@vger.kernel.org Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - enable IRQ operation in F34 V7Nick Dyer3-68/+83
The polled firmware update proved unreliable when testing on S7817. Use attention to signal commands are complete. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - change F12 clip to inactive border debugNick Dyer1-11/+7
The data in F12_2D_Ctrl8 corresponds to the inactive border width used by the RMI device. It is not in pixel units and should not be treated as a clip value. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: synaptics-rmi4 - use dev_driver_string when registering interruptNick Dyer1-1/+1
When IRQ handling was moved to rmi_driver in 3aeed5b the naming of the interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch restores the previous behaviour and makes the interrupt easier to identify in /proc/interrupts. Signed-off-by: Nick Dyer <nick@shmanahar.org> Tested-by: Chris Healy <cphealy@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - highlight support for AR1020Martin Kepplinger2-5/+5
ar1021_i2c also supports the ar1020 device I'm using. This is tested. They also share the same datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf So let users see that they have a compatible in front of them by adding AR1020 to the driver's description. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - do not force raising edge IRQ triggerDmitry Torokhov1-1/+1
We should not be forcing edge triggered interrupt, but rather let platform decide the kind of trigger it needs to use. Also, the driver is not quite safe with regard to edge-triggered interrupts as it does not try to kick the controller after requesting/enabling IRQ. Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-14Input: ar1021_i2c - fix too long name in driver's device tableDmitry Torokhov1-1/+1
The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: ar1021_i2c - coding style fixesMartin Kepplinger1-2/+2
Use the common kernel coding style and corrently align parameters with open parenthesis. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: lpc32xx_ts - check for clk_prepare_enable() errorFabio Estevam1-5/+8
clk_prepare_enable() may fail, so we better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-12Input: imx6ul_tsc - fix error handlingFabio Estevam1-3/+12
If imx6ul_tsc_init() fails we should not return directly. We should disable the previously acquired clocks in this case. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: omap-keypad - fix error handling codeChristophe JAILLET1-1/+1
According to the previous error handling code, it is likely that 'goto err_free_keymap' is expected here in order to avoid a memory leak in error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: xpad - add support for Razer Wildcat gamepadCameron Gutman1-0/+2
Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: xpad - support some quirky Xbox One padsCameron Gutman1-13/+101
There are several quirky Xbox One pads that depend on initialization packets that the Microsoft pads don't require. To deal with these, I've added a mechanism for issuing device-specific initialization packets using a VID/PID-based quirks list. For the initial set of init quirks, I have added quirk handling from Valve's Steam Link xpad driver[0] and the 360Controller project[1] for macOS to enable some new pads to work properly. This should enable full functionality on the following quirky pads: 0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional) 0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional) 0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional) [0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c [1]: https://github.com/360Controller/360Controller Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: yealink - define packet offset __be16 instead of u16Martin Kepplinger1-1/+1
sparse says warning: incorrect type in assignment (different base types) expected unsigned short [unsigned] [usertype] offset got restricted __be16 [usertype] <noident> for every usage of cpu_to_be16 in yealink.c. Defining it __be16 in the first place shouldn't hurt. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Henk.Vergonet@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: turbografx - use setup_timerGeliang Tang1-3/+1
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: locomokbd - use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: gameport - use setup_timerGeliang Tang1-3/+2
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: db9 - use setup_timerGeliang Tang1-3/+1
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-10Input: soc_button_array - properly map usage 0x07/0xe3 to KEY_LEFTMETAHans de Goede1-1/+1
When submitting the support for the ACPI0011 windows tablet keys device I mapped the "windows" logo homekey to KEY_HOMEPAGE. But this is inconsistent with how it is done on windows tablets using the old PNP0C40 ACPI device and it does not match the HUT spec, which says that usage-page 7 usage 0xe3 is "Keyboard Left GUI". This commit maps usage-page 7 usage 0xe3 to KEY_LEFTMETA fixing this. Fixes: 4c3362f44980 ("Input: soc_button_array - add support for ACPI 6.0...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - add support for pm8916's vibratorDamien Riegel2-1/+11
Add pm8xxx_regs for this PMIC and the device tree match table entry. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - handle separate enable registerDamien Riegel1-1/+10
Some PMIC vibrator IPs use a separate enable register to turn the vibrator on and off. To detect if a vibrator uses this feature, rely on the enable_mask being non-zero. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - parametrize the driverDamien Riegel1-16/+33
In order to prepare this driver to support other vibrators of the same kind, move some hardcoded values to a structure holding register parameters (address, mask, shit of the control register). Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: pm8xxx-vib - reorder header alphabeticallyDamien Riegel1-4/+4
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: sur40 - fix bad endianness handling in sur40_pollMartin Kepplinger1-1/+1
sparse says: sur40.c:372:40: warning: restricted __le32 degrades to integer the header's data is __le32 so we need to convert it before comparing. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: eeti_ts - switch to gpiod APIDmitry Torokhov1-17/+7
gpiod API allows standard way of specifying GPIO polarity and takes it into account when reading or setting GPIO state. It also allows us to switch to common way of obtaining GPIO descriptor and away form legacy platform data. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-05Input: eeti_ts - expect platform code to set interrupt triggerDmitry Torokhov1-5/+1
Instead of keying interrupt trigger off GPIO polarity, let's rely on platform code to set it up properly for us. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - switch to using threaded interruptDmitry Torokhov1-43/+36
Instead of having standard interrupt handler and manually firing work item to perform I2C reads, let's switch to threaded interrupts, which were designed specifically for this purpose. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - use gpio_get_value_cansleepDmitry Torokhov1-1/+1
We are reading GPIO state in a non-atomic context (workqueue), so we can use "cansleep" variant, and thus make the driver available on systems where GPIO controllers require sleeping when reading GPIO state. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - respect interrupt set in client structureDmitry Torokhov1-7/+6
Instead of expecting that GPIO is always interrupt source, let's use interrupt specified in I2C client. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - switch to using managed resourcesDmitry Torokhov1-48/+22
Using devm_* APIs simpifies error handling and device teardown. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - use input_set_capability()Dmitry Torokhov1-2/+1
Use input_set_capability() instead of manipulating evbit/keybit masks directly. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - use get_unaligned_be16() to retrieve dataDmitry Torokhov1-2/+4
Instead of manually converting big endian data on wire into host endianness, let's use helpers to do that for us. It might save us a few cycles if host endianness matches what's on wire. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - use BIT(n)Dmitry Torokhov1-4/+4
Use idiomatic BIT(n) to form single-bit masks. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: eeti_ts - rename eeti_ts_priv to eeti_tsDmitry Torokhov1-57/+58
Also rename 'priv' variables to eeti. Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - when registering sensors do not call them "drivers"Dmitry Torokhov3-69/+69
We are not registering drivers, but transport devices (AKA sensors), so let's call them that. Also let's rename "retval" to "error" in probe() functions as the variables are used to store error codes. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - cleanup SMbus mapping handlingDmitry Torokhov1-25/+18
There is no reason to copy structures field-by-filed when we can copy elements at once. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - fix endianness issue in SMBus transportDmitry Torokhov1-5/+5
The mapping table holds address in LE form, so we should convert it to CPU when comparing it. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics-rmi4 - fix handling failures from rmi_enable_sensorDmitry Torokhov1-3/+8
If rmi_enable_sensor() fails in rmi_driver_probe(), we should not return immediately, but disable IRQs and tear down function list. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03Input: synaptics - use u8 instead of unsigned charDmitry Torokhov2-40/+42
The rest of the kernel uses u8, u16, etc for data coming form hardware, let's switch ti using u8 here as well. Also turn pkt_type into an enum. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-26 06:29:57 +0000