summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-02-05ks8695net: add GRO supportEric Dumazet1-6/+5
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Note that rx_lock seems to be useless, NAPI logic should not need this extra care. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05skge: use napi_complete_done()Eric Dumazet1-5/+3
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API and get rid of napi_gro_flush() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05ep93xx_eth: add GRO supportEric Dumazet1-23/+6
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05pcnet32: use napi_complete_done()Eric Dumazet1-8/+3
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05amd8111e: add GRO supportEric Dumazet1-92/+72
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-05epic100: use napi_complete_done()Eric Dumazet1-24/+7
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) get rid of baroque code and ease maintenance. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-058139cp: use napi_complete_done()Eric Dumazet1-9/+2
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. 4) Eventually get rid of napi_gro_flush() in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-058139too: use napi_complete_done()Eric Dumazet1-6/+2
Use napi_complete_done() instead of __napi_complete() to : 1) Get support of gro_flush_timeout if opt-in 2) Not rearm interrupts for busy-polling users. 3) use standard NAPI API. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04virtio_net: exploit napi_complete_done() return valueEric Dumazet1-5/+6
Since commit 364b6055738b ("net: busy-poll: return busypolling status to drivers"), napi_complete_done() returns a boolean that can be used by drivers to conditionally rearm interrupts. This patch changes virtio_net to use this boolean to avoid a bit of overhead for busy-poll users. Jason reports about 1.1% improvement for 1 byte TCP_RR (burst 100). Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-04Merge branch '40GbE' of ↵David S. Miller14-153/+129
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-02-03 This series contains updates to i40e/i40evf only. Jake fixes up the driver to not call i40e_vsi_kill_vlan() or i40e_vsi_add_vlan() when the PVID is set or when the VID is less than 1. Cleaned up a check which really is not needed since there is no real reason why we cannot just call i40e_del_mac_all_vlan() directly. Renamed functions to better reflect their actual purpose and how they function in a more clear manner. Bimmy cleans up unused/deprecated macros. Mitch cleans up unused device ids which were intended for use when running Linux VF drivers under Hyper-V, but found to be not needed. Then cleaned up a function that is no longer needed since the client open and close functions were refactored. Adds a sleep without timeout until the reply from the PF driver has been received since the iWARP client cannot continue until the operation has been completed. Tushar Dave fixes an issue seen on SPARC where the use of the 'packed' directive was causing kernel unaligned errors. Alex does a refactor to pull some data off of the stack and store it in the transmit buffer info section of the transmit ring. Alan fixes a bug which was caused by passing a bad register value to the firmware, by refactoring the macro INTRL_USEC_TO_REG into a static inline function. Also added feedback to the user as to the actual interrupt rate limit being used when it differs from the requested limit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03enic: Remove local ndo_busy_poll() implementation.David S. Miller2-139/+5
We do polling generically these days. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03ixgbevf: get rid of custom busy polling codeEric Dumazet3-215/+0
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03ixgbe: get rid of custom busy polling codeEric Dumazet4-224/+5
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: spectrum: Implement TC flower offloadJiri Pirko4-3/+331
Extend the existing setup_tc ndo call and allow to offload cls_flower rules. Only limited set of dissector keys and actions are supported now. Use previously introduced ACL infrastructure to offload cls_flower rules to be processed in the HW. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: spectrum: Introduce ACL core with simple TCAM implementationJiri Pirko6-8/+1769
Add ACL core infrastructure for Spectrum ASIC. This infra provides an abstraction layer over specific HW implementations. There are two basic objects used. One is "rule" and the second is "ruleset" which serves as a container of multiple rules. In general, within one ruleset the rules are allowed to have multiple priorities and masks. Each ruleset is bound to either ingress or egress a of port netdevice. The initial TCAM implementation is very simple and limited. It utilizes parman lsort manager to take care of TCAM region layout. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: resources: Add ACL related resourcesJiri Pirko1-2/+18
Add couple of resource limits related to ACL. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: spectrum: Introduce basic set of flexible key blocksJiri Pirko1-0/+109
Introduce basic set of Spectrum flexible key blocks. It contains blocks needed to carry all elements defined so far. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: core: Introduce flexible actions supportJiri Pirko3-1/+753
Each entry which is matched during ACL lookup points to an action set. This action set contains up to three separate actions. If more actions are needed to be chained, the extended set is created to hold them in KVD linear area. This patch implements handling of sets and encoding of actions. Currectly, only two actions are supported. Drop and forward. Forward action uses PBS pointer to KVD linear area, so the action code needs to take care of this as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: core: Introduce flexible keys supportJiri Pirko3-1/+714
Hardware supports matching on so called "flexible keys". The idea is to assemble an optimal key to use for matching according to the fields in packet (elements) requested by user. Certain sets of elements are combined into pre-defined blocks. There is a picker to find needed blocks. Keys consist of 1..n blocks. Alongside with that, an initial portion of elements is introduced in order to be able to offload basic cls_flower rules. Picked keys are cached so multiple rules could share them. There is an encode function provided that takes care of encoding key and mask values according to given key. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine Extended Flexible Action RegisterJiri Pirko1-3/+36
PEFA register is used for accessing an extended flexible action entry in the central KVD Linear Database. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine Policy Based Switching RegisterJiri Pirko1-0/+31
The PPBS register retrieves and sets Policy Based Switching Table entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine Rules Copy RegisterJiri Pirko1-0/+77
The PRCR register is used for accessing rules within a TCAM region. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine Port Binding TableJiri Pirko1-0/+63
The PPBT is used for configuration of the Port Binding Table. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine TCAM Entry Register Version 2Jiri Pirko1-0/+100
The PTCE-V2 register is used for accessing rules within a TCAM region. It is a new version of PTCE in order to support wider key, mask and action within a TCAM region. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine TCAM Allocation RegisterJiri Pirko1-0/+106
The PTAR register is used for allocation of regions in the TCAM. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine ACL Group Table registerJiri Pirko1-0/+54
The PAGT register is used for configuration of the ACL Group Table. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: reg: Add Policy-Engine ACL RegisterJiri Pirko1-2/+45
The PACL register is used for configuration of the ACL. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: item: Add helpers for getting pointer into payload for char buffer itemJiri Pirko1-0/+19
Sometimes it is handy to get a pointer to a char buffer item and use it direcly to write/read data. So add these helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03mlxsw: item: Add 8bit item helpersJiri Pirko1-2/+77
Item heplers for 8bit values are needed, let's add them. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03bonding: Remove unnecessary returned value checkZhu Yanjun1-6/+4
The function bond_info_query alwarys returns 0. As such, in the function bond_do_ioctl, it is not necessary to check the returned value. So the interface type of the function bond_info_query is changed to void. The redundant check is removed. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03cxgb4: get rid of custom busy poll codeEric Dumazet4-174/+6
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot of code, we also remove one spin_lock() from driver fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03myri10ge: get rid of custom busy poll codeEric Dumazet1-193/+4
Compared to custom busy_poll, the generic NAPI one is simpler and removes a lot of code. It removes one atomic in the fast path (when busy poll is not in action) since we do not have to use an extra spinlock. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03be2net: get rid of custom busy poll codeEric Dumazet2-147/+9
Compared to custom busy_poll, the generic NAPI one is better, since it allows to use GRO, and it removes a lot of code and extra locked operations in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03vxlan: support fdb and learning in COLLECT_METADATA modeRoopa Prabhu1-71/+125
Vxlan COLLECT_METADATA mode today solves the per-vni netdev scalability problem in l3 networks. It expects all forwarding information to be present in dst_metadata. This patch series enhances collect metadata mode to include the case where only vni is present in dst_metadata, and the vxlan driver can then use the rest of the forwarding information datbase to make forwarding decisions. There is no change to default COLLECT_METADATA behaviour. These changes only apply to COLLECT_METADATA when used with the bridging use-case with a special dst_metadata tunnel info flag (eg: where vxlan device is part of a bridge). For all this to work, the vxlan driver will need to now support a single fdb table hashed by mac + vni. This series essentially makes this happen. use-case and workflow: vxlan collect metadata device participates in bridging vlan to vn-segments. Bridge driver above the vxlan device, sends the vni corresponding to the vlan in the dst_metadata. vxlan driver will lookup forwarding database with (mac + vni) for the required remote destination information to forward the packet. Changes introduced by this patch: - allow learning and forwarding database state in vxlan netdev in COLLECT_METADATA mode. Current behaviour is not changed by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used to support the new bridge friendly mode. - A single fdb table hashed by (mac, vni) to allow fdb entries with multiple vnis in the same fdb table - rx path already has the vni - tx path expects a vni in the packet with dst_metadata - prior to this series, fdb remote_dsts carried remote vni and the vxlan device carrying the fdb table represented the source vni. With the vxlan device now representing multiple vnis, this patch adds a src vni attribute to the fdb entry. The remote vni already uses NDA_VNI attribute. This patch introduces NDA_SRC_VNI netlink attribute to represent the src vni in a multi vni fdb table. iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's. before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metadata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03hns_enet: use cpumask_var_t for on-stack maskArnd Bergmann1-10/+15
On large SMP builds, we can run into a build warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_set_irq_affinity.isra.27': drivers/net/ethernet/hisilicon/hns/hns_enet.c:1242:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] The solution here is to use cpumask_var_t, which can use dynamic allocation when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03virtio_net: remove custom busy_pollEric Dumazet1-41/+0
Generic NAPI busy polling allows us to remove custom implementations found in drivers. It is possible further optimization could be done by testing napi_complete_done() return value. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03atl1e: add GRO supportEric Dumazet1-1/+1
It is time to add GRO support to this driver. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03cxgb4: Fix uld_send() for ctrl pktsArjun V1-3/+8
Without any uld being loaded, uld_txq_info[] will be NULL. uld_send() is also used for sending control work requests(for eg: setting filter) that dont require any ulds to be loaded. Hence move uld_txq_info[] assignment after ctrl_xmit(). Also added a NULL check for uld_txq_info[]. Fixes: 94cdb8bb993a (cxgb4: Add support for dynamic allocation of resources for ULD). Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03sfc-falcon: get rid of custom busy polling codeEric Dumazet3-169/+1
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of tricky code, we also remove one lock operation in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03sfc: get rid of custom busy polling codeEric Dumazet3-169/+1
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of tricky code, we also remove one lock operation in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02i40e: add interrupt rate limit verbosityAlan Brady1-3/+10
Due to the resolution of the register controlling interrupt rate limiting, setting certain values for the interrupt rate limit make it appear as though the limiting is not completely accurate. The problem is that the interrupt rate limit is getting rounded down to the nearest multiple of 4. This patch fixes the problem by adding some feedback to the user as to the actual interrupt rate limit being used when it differs from the requested limit. Without this patch setting interrupt rate limits may appear to behave inaccurately. Change-ID: I3093cf3f2d437d35a4c4f4bb5af5ce1b85ab21b7 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: refactor macro INTRL_USEC_TO_REGAlan Brady3-3/+16
This patch refactors the macro INTRL_USEC_TO_REG into a static inline function and fixes a couple subtle bugs caused by the macro. This patch fixes a bug which was caused by passing a bad register value to the firmware. If enabling interrupt rate limiting, a non-zero value for the rate limit must be used. Otherwise the firmware sets the interrupt rate limit to the maximum value. Due to the limited resolution of the register, attempting to set a value of 1, 2, or 3 would be rounded down to 0 and limiting was left enabled, causing unexpected behavior. This patch also fixes a possible bug in which using the macro itself can introduce unintended side-affects because the macro argument is used more than once in the macro definition (e.g. a variable post-increment argument would perform a double increment on the variable). Without this patch, attempting to set interrupt rate limits of 1, 2, or 3 results in unexpected behavior and future use of this macro could cause subtle bugs. Change-Id: I83ac842de0ca9c86761923d6e3a4d7b1b95f2b3f Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: remove unused functionMitch Williams2-36/+0
After refactoring the client open and close code, this is no longer needed. Remove it. Change-ID: If8e6e32baa354d857c2fd8b2f19404f1786011c4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Remove FPK HyperV VF device IDJayaprakash Shanmugam2-2/+0
Requirement for VFs to use the VMBus has been removed that's why removing Hyper-V VF device ID. Change-ID: I84f0964f443ee0db3e5e444b5ace996eb71b8280 Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Quick refactor to start moving data off stack and into Tx buffer infoAlexander Duyck2-40/+54
This patch does some quick work to pull some of the data off of the stack and hopefully start storing it in the Tx buffer info section of the Tx ring. Ideally we should be moving away from having to store much of anything on the stack and can just maintain it all in the descriptor rings. Change-ID: I4b4715ea1920e122502482b3f9e56a9a6cb1e9fe Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: remove unnecessary __packedTushar Dave1-2/+2
'struct i40e_dma_mem' defined with 'packed' directive causing kernel unaligned errors on sparc. e.g. i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.16-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 i40e 0000:03:00.0: fw 5.1.40981 api 1.5 nvm 5.04 0x80002548 0.0.0 This can be fixed with get_unaligned/put_unaligned(). However no reference in driver shows that 'struct i40e_dma_mem' directly shoved into NIC hardware. But instead fields of the struct are being read and used for hardware. Therefore, __packed is unnecessary for 'struct i40e_dma_mem'. In addition, although 'struct i40e_virt_mem' doesn't cause any unaligned access, keeping it packed is unnecessary as well because of aforementioned reason. This change make 'struct i40e_dma_mem' and 'struct i40e_virt_mem' unpacked. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40evf: remove unused device IDMitch Williams1-1/+0
This device ID was intended for use when running Linux VF drivers under Hyper-V, but we have determined that it is not necessary. Since it is unused, and will never be used, remove it. Change-ID: I74998ab4237db043cd400547bb54a0a5e2a37ea5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Deprecating unused macroBimmy Pujari4-18/+3
I40E_MAC_X710 was supposed to be for 10G and I40E_MAC_XL710 was supposed to be for 40G. But function i40e_is_mac_710 sets I40E_MAC_XL710 for all device IDS, I40E_MAC_X710 is not used at all. As there is nothing to compare there is no need for this function. Thus deprecating this extra macro and removing this function entirely and replacing it with a direct check. Change-ID: I7d1769954dccd574a290ac04adb836ebd156730e Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: when adding or removing MAC filters, correctly handle VLANsJacob Keller2-10/+7
Instead of using i40e_add_filter or i40e_del_filter directly, when adding a MAC address, we should normally be using i40e_add_mac_filter or i40e_del_mac_filter. These functions correctly handle the various cases of VLAN mode or PVID settings. This ensures consistency and avoids the issues that can occur with the recent addition of a WARN_ON() in i40e_sync_vsi_filters. Change-ID: I7fe62db063391fdd1180b2d6a6a3c5ab4307eeee Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: avoid O(n^2) loop when deleting all filtersJacob Keller3-2/+3
Use __i40e_del_filter instead of using i40e_del_filter() which will avoid doing an additional search to delete a filter we already have the pointer for. Change-ID: Iea5a7e3cafbf8c682ed9d3b6c69cf5ff53f44daf Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 23:10:36 +0000