summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-11-14net: atheros: atl1c: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-24/+30
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14net: alx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-24/+35
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13mlxsw: spectrum_router: Add FIB abort warningJiri Pirko1-0/+3
Add a warning that the abort mechanism was triggered for device. Also avoid going through the procedure if abort was already done. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: dsa: mv88e6xxx: 6351 family also has RGMII delaysAndrew Lunn1-0/+4
The recent refactoring of setting the MAC configuration broke setting of RGMII delays, via the phy-mode, on the 6351 family. Add the missing ops to the structure. Fixes: 7340e5ecdbb1 ("net: dsa: mv88e6xxx: setup port's MAC") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: dsa: mv88e6xxx: Don't modify RGMII delays when not RGMII modeAndrew Lunn1-2/+3
The RGMII modes delays can be set via strapping pings or EEPROM. Don't change them unless explicitly asked to change them. The recent refactoring of setting the MAC configuration changed this behaviours, in that CPU and DSA ports have any pre-configured RGMII delays removed. This breaks the Armada 370RD board. Restore the previous behaviour, in that RGMII delays are only applied/removed when explicitly asked for via an phy-mode being PHY_INTERFACE_MODE_RGMII* Fixes: 7340e5ecdbb1 ("net: dsa: mv88e6xxx: setup port's MAC") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: atheros: atl1e: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-26/+36
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. The previous implementation of set_settings was modifying the value of advertising, but with the new API, it's not possible. The structure ethtool_link_ksettings is defined as const. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: ethernet: ti: davinci_cpdma: don't stop ctlr if it was stoppedIvan Khoronzhuk1-1/+1
No need to stop ctlr if it was already stopped. It can cause timeout warns. Steps: - ifconfig eth0 down - ethtool -l eth0 rx 8 tx 8 - ethtool -l eth0 rx 1 tx 1 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configurationIvan Khoronzhuk2-53/+53
The dma ctlr is reseted to 0 while cpdma soft reset, thus cpdma ctlr cannot be configured after cpdma is stopped. So restoring content of cpdma ctlr while off/on procedure is needed. The cpdma ctlr off/on procedure is present while interface down/up and while changing number of channels with ethtool. In order to not restore content in many places, move it to cpdma_ctlr_start(). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13mlxsw: reg: Fix pwm_frequency field size in MFCR registerJiri Pirko1-1/+1
The field is 7bit long. Fix it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: phy: marvell: optimize logic for page changing during initUwe Kleine-König1-4/+2
Instead of remembering if the page was changed, just compare the current page to the saved one. This is easier and has the advantage to save a register write if the page was already restored. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for a KR redriverLendacky, Thomas5-37/+458
This patch provides support for the presence of a KR redriver chip in between the device PCS and an external PHY. When a redriver chip is present the device must perform clause 73 auto-negotiation in order to set the redriver chip for the downstream connection. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for MDIO attached PHYsLendacky, Thomas6-11/+557
Use the phylib support in the kernel to communicate with and control an MDIO attached PHY. Use the hardware's MDIO communication mechanism to communicate with the PHY. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for SFP+ modulesLendacky, Thomas6-8/+1642
Add support for recognizing and using SFP+ modules directly. This includes using the I2C support to read and interpret the information returned from an SFP+ module and configuring things properly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: phy: expose phy_aneg_done API for use by driversLendacky, Thomas2-10/+2
Make phy_aneg_done() available to drivers so that the result of the auto-negotiation initiated by phy_start_aneg() can be determined. Remove the local implementation of phy_aneg_done() from the Aeroflex driver and use the phy library version. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add I2C support for sideband communicationLendacky, Thomas9-1/+753
Add support to initialize and use the I2C controller within the hardware in order to perform sideband communication, e.g. determine the SFP media type that is installed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add ECC status support for the device memoryLendacky, Thomas7-3/+340
Some versions of the amd-xgbe device are capable of reporting ECC error information back to the driver. Add support to process, track and report on this information. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add support for new DMA interrupt modeLendacky, Thomas6-36/+91
The current per channel DMA interrupt support is based on an edge triggered interrupt that is not maskable. This results in having to call the disable_irq/enable_irq functions in order to prevent interrupts during napi processing. The hardware now has a way to configure the per channel DMA interrupt that will allow for masking the interrupt which prevents calling disable_irq/enable_irq now. This patch makes use of this support. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Allow for a greater number of Rx queuesLendacky, Thomas1-2/+1
Remove the call to netif_get_num_default_rss_queues() and replace it with num_online_cpus() to allow for the possibility of using all of the hardware DMA channels available. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add PCI device supportLendacky, Thomas11-20/+1657
Add support for new PCI devices to the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Add a workaround for Tx timestamp issueLendacky, Thomas3-3/+12
Update the reading of the Tx timestamp to account for a hardware issue on how the fields and interrupt are cleared. The "seconds" portion of the timestamp should be read first, followed by the "nanoseconds" portion. Reading the "nanoseconds" portion should clear the timestamp data and the interrupt. Because of an issue with the hardware this order is reversed and reading the "seconds" portion actually clears the timestamp. The code currently follows this workaround, but to guard against future versions where this is fixed add a field to the version data to indicate if the workaround is required or not. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13amd-xgbe: Guard against incorrectly generated interruptsLendacky, Thomas1-1/+15
Due to a hardware issue, it is possible for interrupt events to be incorrectly generated when performing a soft reset. To guard against this, perform the soft reset twice. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12bpf, mlx4: fix prog refcount in mlx4_en_try_alloc_resources error pathDaniel Borkmann1-1/+4
Commit 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP forwarding rings scheme") added a bug in that the prog's reference count is not dropped in the error path when mlx4_en_try_alloc_resources() is failing from mlx4_xdp_set(). We previously took bpf_prog_add(prog, priv->rx_ring_num - 1), that we need to release again. Earlier in the call path, dev_change_xdp_fd() itself holds a reference to the prog as well (hence the '- 1' in the bpf_prog_add()), so a simple atomic_sub() is safe to use here. When an error is propagated, then bpf_prog_put() is called eventually from dev_change_xdp_fd() Fixes: 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12net: ethernet: ti: davinci_cpdma: free memory while channel destroyIvan Khoronzhuk1-1/+1
While create/destroy channel operation memory is not freed. It was supposed that memory is freed while driver remove. But a channel can be created and destroyed many times while changing number of channels with ethtool. Based on net-next/master Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: add the support to add/remove the ucast entry to/from tableKejian Yan7-0/+155
This patch adds the support to add or remove the unicast entries to the table and remove from the table. Reported-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: add multicast tcam table clearKejian Yan7-0/+113
There is no clear operation before add a new multicast tcam table, so the tcam table will be overflow when add more entries. Reported-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify tcam table of mask_keyQianqian Xie1-0/+7
The packets of wrong mac address(only the last bit is different) can be received in Big-endian by current definition of mask_key. Thus it needs to be modified to support Big-endian and ensure Big-endian normal. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify tcam table of mac mc-entryQianqian Xie1-8/+17
The current definition of mac_mc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac mc-entry to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify tcam table of mac mc-portQianqian Xie1-5/+13
Little-endian is only supported by current tcam table to add or delete mac mc-port. This patch makes it support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify table index to get mac entryQianqian Xie1-4/+10
Big-endian is not supported by the current definition of table index to get mac entry. It needs to be modified to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify tcam table of mac uc-entryQianqian Xie1-6/+12
The current definition of mac_uc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac uc-entry to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify tcam table and set mac keyQianqian Xie2-9/+20
The current definition of dsaf_drv_tbl_tcam_key is only suitable for Little-endian. If data is stored in Big-endian, this may lead to error in data use. Shift operation can make it work normally in both Big-endian and Little-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify buffer format of cpu data to le64Qianqian Xie1-3/+3
Hardware ring buffer data is stored in Little-endian. Thus cpu data should be modified to Little-endian. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: fix to intimate the link-status change by adding LF/RF methodDaode Huang5-49/+37
In current scenario, when the interface is disabled we reset the XGMAC RX/TX functionality. This operation does not affects the PHY layer/SFP and which appears UP to the remote end(this behaviour is unlike GMAC). The result is remote end keeps on sending the packets which gets partly processed by XMAC and dropped. Since these are partly processed these appears as errored packets in the packet counter statistics. This patch fixes this behaviour and adds local-fault and remote-fault functionality which can be used to intimate the remote peer whenever the state of the interface changes. This patch also removes the existing hns_dsaf_xge_core_srst_by_port function which was being used to reset the RX/TX functionality at XGE Core. Reported-by: Jun He <hjat2005@huawei.com> Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: modify ethtool statistics value errorQianqian Xie1-2/+2
This patch modify the gmac_rx_filt_pkt and gmac_rx_octets_total_filt statistics value. The two statistics is inconsistent with register, and just the opposite. Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Jun He <hjat2005@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: delete redundant macro definitionQianqian Xie3-5/+1
This patch deletes redundant macro definitions in hns drivers. And change the .h file containing relation to make the layers more clearly Signed-off-by: Qianqian Xie <xieqianqian@huawei.com> Signed-off-by: Weiwei Deng <dengweiwei@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: bug fix about restart auto-negotiationDaode Huang1-1/+2
When set auto-negotiation off and duplex half, if run "ethtool -r ethX" on port with phy, then the port will be failed to work. It should forbid to start auto-negotiation when auto-negotiate is off. This patch add the limited condition. Reported-by: Jinchuang Tian <tianjinchuang1@huawei.com> Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: set default mac pause time to 0xffffDaode Huang1-1/+1
The default mac pause time set to 0xff which is too short for pausing, this patch change it to the max value 0xffff. Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: fix for promisc mode in HNS driverKejian Yan4-4/+67
If set promisc mode when there is some traffic, The service nic will cause system halted. We reserve the last 6 tcam entry for the 6 ports. If promisc mode is enabled, we can config the relative tcam as fuzzy matching and set to be valid, or set the tcam to be invalid Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10net: hns: add fuzzy match of tcam table for hnsKejian Yan5-54/+118
Since there is not enough tcam table entries for vlan and multicast address, HNSv2 needs to add support of fuzzy matching of TCAM tables. To add fuzzy match of TCAM, we Add the property to mask the bits to be fuzzy matched Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09ptp: dp83640: Use the high resolution frequency method.Richard Cochran1-7/+7
The dp83640 has a frequency resolution of about 0.029 ppb. This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09ptp: igb: Use the high resolution frequency method.Richard Cochran1-8/+8
The 82580 and related devices offer a frequency resolution of about 0.029 ppb. This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09ptp: Introduce a high resolution frequency adjustment method.Richard Cochran1-1/+4
The internal PTP Hardware Clock (PHC) interface limits the resolution for frequency adjustments to one part per billion. However, some hardware devices allow finer adjustment, and making use of the increased resolution improves synchronization measurably on such devices. This patch adds an alternative method that allows finer frequency tuning by passing the scaled ppm value to PHC drivers. This value comes from user space, and it has a resolution of about 0.015 ppb. We also deprecate the older method, anticipating its removal once existing drivers have been converted over. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09bnxt_en: do not call napi_hash_add()Eric Dumazet1-1/+0
This is automatically done from netif_napi_add(), and we want to not export napi_hash_add() anymore in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: mii: report 0 for unknown lp_advertisingArnd Bergmann1-0/+2
The newly introduced mii_ethtool_get_link_ksettings function sets lp_advertising to an uninitialized value when BMCR_ANENABLE is not set: drivers/net/mii.c: In function 'mii_ethtool_get_link_ksettings': drivers/net/mii.c:224:2: error: 'lp_advertising' may be used uninitialized in this function [-Werror=maybe-uninitialized] As documented in include/uapi/linux/ethtool.h, the value is expected to be zero when we don't know it, so let's initialize it to that. Fixes: bc8ee596afe8 ("net: mii: add generic function to support ksetting support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09xen-netback: prefer xenbus_scanf() over xenbus_gather()Jan Beulich1-6/+6
For single items being collected this should be preferred as being more typesafe (as the compiler can check format string and to-be-written-to variable match) and more efficient (requiring one less parameter to be passed). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09sfc: report 4-tuple UDP hashing to ethtool, if it's enabledEdward Cree3-6/+14
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09sfc: enable 4-tuple RSS hashing for UDPEdward Cree1-0/+82
This improves UDP spreading, and also slightly improves GRO performance of encapsulated TCP on 7000 series NICs. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net/mlx5e: Add basic TC tunnel set action for SRIOV offloadsHadar Hen Zion4-7/+312
In mlx5 HW, encapsulation is offloaded by the steering rule having index into an encapsulation table containing the entire set of headers to be added by the HW. The driver sets these headers in a buffer when we are offloading the action. The code maintains mlx5_encap_entry for each encap header it has encountered when attempted to offload TC tunnel set action. This entry maintains a linked list of all the flows sharing the same encap header, when the last flow is removed from the list the encap entry is removed. The actual encap_header is allocated by the driver in the hardware only if we have layer two neighbour info when the encap entry is created. While the flow is in the driver, the driver holds a reference on the neighbour. When a new flow with encap action is inserted, the code first checks if the required encap entry exists according to the tunnel set parameters. If it does the encap is shared, otherwise a new mlx5_encap_entry is created. TC action parsing implementation in the driver assumes that tunnel set action is provided in the same order set by the user, e.g before the mirred_redirect action. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net/mlx5e: Add ndo_udp_tunnel_add to VF representorsHadar Hen Zion3-4/+10
By implementing this ndo, the host stack will set the vxlan udp port also to VF representor netdevices. This will allow the TC offload code in the driver when it gets a tunnel key set action to identify the UDP port as vxlan, and hence the rule will be a candidate for offloading. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net/mlx5e: Add TC tunnel release action for SRIOV offloadsHadar Hen Zion2-2/+163
Enhance the parsing of offloaded TC rules to set HW matching on outer (encapsulation) headers. Parse TC tunnel release action and set it as mlx5 decap action when the required capabilities are supported. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-07 12:47:59 +0000