summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-03sh_eth: kill redundant check in the probe() methodSergei Shtylyov1-2/+1
Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03ravb: kill redundant check in the probe() methodSergei Shtylyov1-2/+1
Browsing thru the driver disassembly, I noticed that gcc was able to figure out that the 'ndev' pointer is always non-NULL when calling free_netdev() on the probe() method's error path and thus skip that redundant NULL check... gcc is smart, be like gcc! :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02liquidio: Use zeroing memory allocator than allocator/memsetHimanshu Jha1-5/+2
Use vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02ethernet/broadcom: Use zeroing memory allocator than allocator/memsetHimanshu Jha2-7/+4
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed: Use zeroing memory allocator than allocator/memsetHimanshu Jha2-9/+6
Use dma_zalloc_coherent and vzalloc for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: stmmac: Allow debug prints of frame_len/COEFlorian Fainelli1-3/+2
There is no reason not to allow printing the frame_len/COE value and put that under a check for ETH_FRAME_LEN, drop it so we can see what the descriptor reports. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: stmmac: Pad ring number with zeroes in display_ring()Florian Fainelli3-3/+3
Make the printing of the ring number consistent and properly aligned by padding the ring number with up to 3 zeroes, which covers the maximum ring size. This makes it a lot easier to see outliers in debug prints. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02phylink: remove 'mode' variable from phylink_sfp_module_insert()Russell King1-7/+8
'mode' is actually constant through phylink_sfp_module_insert(), so remove it and replace it with the enumerated constant. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: improve support for direct-attach copper cablesRussell King1-7/+44
Improve the support for direct-attach copper so that we avoid kernel warning messages, and report the appropriate PORT_DA type to userspace. Direct Attach cables can use a number of protocols depending on their range of speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: add support for 1000Base-PX and 1000Base-BX10Russell King1-0/+21
Add support for decoding the transceiver information for 1000Base-PX and 1000Base-BX10. These use 1000BASE-X protocol. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: don't guess support from connector typeRussell King1-29/+0
Don't try to guess the support mask from the connector type - this is mostly irrelevant to the speeds that the transceiver supports. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sfp: use precision to print non-null terminated stringsRussell King1-18/+6
Rather than memcpy()'ing the strings and null terminate them, printf allows non-NULL terminated strings provided the precision is not more than the size of the buffer. Use this form to print the basic module information rather than copying and terminating the strings. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: add support for half duplex 100M and 10MRussell King1-25/+12
Add support for half-duplex 100M and 10M copper connections by parsing the advertisment results rather than trying to decode the negotiated speed from one of the PHYs "vendor" registers. This allows us to decode the duplex as well, which means we can support half-duplex mode for the slower speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: add helper to convert negotiation result to phy settingsRussell King1-0/+43
Add a helper to convert the result of the autonegotiation advertisment into the PHYs speed and duplex settings. If the result is full duplex, also extract the pause mode settings from the link partner advertisment. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: clean up interface mode switchingRussell King1-16/+20
Centralise the PHY interface mode switching, rather than having it in two places. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: add MDI swap reportingRussell King2-0/+64
Add reporting of the MDI swap to the Marvell 10G PHY driver by providing a generic implementation for the standard 10GBASE-T pair swap register and polarity register. We also support reading the MDI swap status for 1G and below from a PCS register. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: marvell10g: update header commentsRussell King1-1/+7
Update header comments to indicate the newly found behaviour with XAUI interfaces. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: hns: add ACPI mode support for ethtool -pJian Shen2-2/+57
The locate operation interface of fiber port can only work with DT mode. Add a new interface to control the locate led for ACPI mode. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Tested-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: Check alignment constraint for T6Ganesh Goudar1-5/+12
Update the check for setting IPV4 filters and align filter_id to multiple of 2, only for IPv6 filters in case of T6. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: ena: increase ena driver version to 1.5.0Netanel Belgazal1-1/+1
Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: ena: add detection and recovery mechanism for handling missed/misrouted ↵Netanel Belgazal5-7/+80
MSI-X A mechanism for detection of stuck Rx/Tx rings due to missed or misrouted interrupts. Check if there are unhandled completion descriptors before the first MSI-X interrupt arrived. The check is per queue and per interrupt vector. Once such condition is detected, driver and device reset is scheduled. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Advance drivers' version to 8.33.0.20Tomer Tayar4-15/+15
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Utilize FW 8.33.1.0Tomer Tayar35-1569/+2598
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: HSI renaming for different types of HWTomer Tayar24-4015/+4021
This patch renames defines and structures in the FW HSI files to allow a distinction between different types of HW. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Refactoring and rearranging FW API with no functional impactTomer Tayar10-3915/+4243
This patch refactors and reorders the FW API files in preparation of upgrading the code to support new FW. - Make use of the BIT macro in appropriate places. - Whitespace changes to align values and code blocks. - Comments are updated (spelling mistakes, removed if not clear). - Group together code blocks which are related or deal with similar matters. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: support early setup for z/VM NICsJulian Wiedmann1-9/+77
The transport mode that a z/VM NIC is configured in, must match the hypervisor-internal network which the NIC is coupled to. To get this right automatically, have qeth issue a diag26c hypervisor call that provides all sorts of information for a specific VNIC. With z/VM update VM65918, this also includes the VNIC's required transport mode. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: use common helper to display rxip/vipaJulian Wiedmann1-66/+24
By parameterising the address type, we need just one helper that walks the IP table and builds up the response string. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02s390/qeth: improve error reporting on IP add/removalJulian Wiedmann3-25/+35
When adding & removing IP entries for rxip/vipa/ipato/hsuid, forward any resulting errors back to the sysfs-level caller. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: use CLIP with LIP6 on T6 for TCAM filtersGanesh Goudar1-1/+11
On T6, LIP compression is always enabled for IPv6 and uncompressed IPv6 for LIP is not supported. So, for IPv6 TCAM filters on T6, add LIP6 to CLIP on filter creation, and release the same on filter deletion. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02forcedeth: optimize the rx with likelyZhu Yanjun1-2/+2
In the rx fastpath, the function netdev_alloc_skb rarely fails. Therefore, a likely() optimization is added to this error check conditional. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02sky2: Replace mdelay with msleep in sky2_vpd_waitJia-Ju Bai1-1/+1
sky2_vpd_wait is not called in an interrupt handler nor holding a spinlock. The function mdelay in it can be replaced with msleep, to reduce busy wait. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller76-333/+881
net/ipv6/ip6_gre.c is a case of parallel adds. include/trace/events/tcp.h is a little bit more tricky. The removal of in-trace-macro ifdefs in 'net' paralleled with moving show_tcp_state_name and friends over to include/trace/events/sock.h in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-7/+46
Pull networking fixes from David Miller: 1) IPv6 gre tunnels end up with different default features enabled depending upon whether netlink or ioctls are used to bring them up. Fix from Alexey Kodanev. 2) Fix read past end of user control message in RDS< from Avinash Repaka. 3) Missing RCU barrier in mini qdisc code, from Cong Wang. 4) Missing policy put when reusing per-cpu route entries, from Florian Westphal. 5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G. Piccoli. 6) Run nested transport mode IPSEC packets via tasklet, from Herbert Xu. 7) Fix handling poll() for stream sockets in tipc, from Parthasarathy Bhuvaragan. 8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert. 9) Another zerocopy ubuf handling fix, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) strparser: Call sock_owned_by_user_nocheck sock: Add sock_owned_by_user_nocheck skbuff: in skb_copy_ubufs unclone before releasing zerocopy tipc: fix hanging poll() for stream sockets sctp: Replace use of sockets_allocated with specified macro. bnx2x: Improve reliability in case of nested PCI errors tg3: Enable PHY reset in MTU change path for 5720 tg3: Add workaround to restrict 5762 MRRS to 2048 tg3: Update copyright net: fec: unmap the xmit buffer that are not transferred by DMA tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path tipc: error path leak fixes in tipc_enable_bearer() RDS: Check cmsg_len before dereferencing CMSG_DATA tcp: Avoid preprocessor directives in tracepoint macro args tipc: fix memory leak of group member when peer node is lost net: sched: fix possible null pointer deref in tcf_block_put tipc: base group replicast ack counter on number of actual receivers net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap() net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ip6_gre: fix device features for ioctl setup ...
2017-12-28Merge tag 'drm-fixes-for-v4.15-rc6' of ↵Linus Torvalds3-4/+5
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "nouveau and i915 regression fixes" * tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix race when adding delayed work items i915: Reject CCS modifiers for pipe C on Geminilake drm/i915/gvt: Fix pipe A enable as default for vgpu
2017-12-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One more fix for the runtime PM clk patches. We're calling a runtime PM API that may schedule from somewhere that we can't do that. We change to the async version of pm_runtime_put() to fix it" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: use atomic runtime pm api in clk_core_is_enabled
2017-12-28Merge tag 'led_fixes_for_4.15-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for brightness setting when delay_off is 0" * tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: core: Fix brightness setting when setting delay_off=0
2017-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds21-105/+204
Pull rdma fixes from Jason Gunthorpe: "This is the next batch of for-rc patches from RDMA. It includes the fix for the ipoib regression I mentioned last time, and the result of a fairly major debugging effort to get iser working reliably on cxgb4 hardware - it turns out the cxgb4 driver was not handling QP error flushing properly causing iser to fail. - cxgb4 fix for an iser testing failure as debugged by Steve and Sagi. The problem was a driver bug in the handling of shutting down a QP. - Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on error unwind and a use after free bug - Improper congestion counter values on mlx5 when link aggregation is enabled - ipoib lockdep regression introduced in this merge window - hfi1 regression supporting the device in a VM introduced in a recent patch - Typo that breaks future uAPI compatibility in the verbs core - More SELinux related oops fixing - Fix an oops during error unwind in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix mlx5_ib_alloc_mr error flow IB/core: Verify that QP is security enabled in create and destroy IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() IB/mlx5: Serialize access to the VMA list IB/hfi: Only read capability registers if the capability exists IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush IB/mlx5: Fix congestion counters in LAG mode RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path iw_cxgb4: when flushing, complete all wrs in a chain iw_cxgb4: reflect the original WR opcode in drain cqes iw_cxgb4: Only validate the MSN for successful completions
2017-12-28Merge tag 'mlx5-shared-4.16-1' of ↵David S. Miller8-214/+420
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== Mellanox, mlx5 E-Switch updates 2017-12-19 This series includes updates for mlx5 E-Switch infrastructures, to be merged into net-next and rdma-next trees. Mark's patches provide E-Switch refactoring that generalize the mlx5 E-Switch vf representors interfaces and data structures. The serious is mainly focused on moving ethernet (netdev) specific representors logic out of E-Switch (eswitch.c) into mlx5e representor module (en_rep.c), which provides better separation and allows future support for other types of vf representors (e.g. RDMA). Gal's patches at the end of this serious, provide a simple syntax fix and two other patches that handles vport ingress/egress ACL steering name spaces to be aligned with the Firmware/Hardware specs. V1->V2: - Addressed coding style comments in patches #1 and #7 - The series is still based on rc4, as now I see net-next is also @rc4. V2->V3: - Fixed compilation warning, reported by Dave. Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-29net/mlx5: Separate ingress/egress namespaces for each vportGal Pressman3-30/+129
Each vport has its own root flow table for the ACL flow tables and root flow table is per namespace, therefore we should create a namespace for each vport. Fixes: efdc810ba39d ("net/mlx5: Flow steering, Add vport ACL support") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-29net/mlx5: Fix ingress/egress naming mistakeGal Pressman1-2/+2
The functions names do not represent their actions, switch the mistaken ingress/egress naming. Fixes: fba53f7b5719 ("net/mlx5: Introduce mlx5_flow_steering structure") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-29net/mlx5e: E-Switch, Use the name of static array instead of its addressGal Pressman1-13/+13
Using the address of a static array is the same as using its name (in this specific use-case), but it's confusing and makes the code less readable. Fixes: 1bd27b11c1df ("net/mlx5: Introduce E-switch QoS management") Fixes: bd77bf1cb595 ("net/mlx5: Add SRIOV VF max rate configuration support") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-29net/mlx5e: E-Switch, Move send-to-vport rule struct to en_repMark Bloch3-16/+16
Move struct mlx5_esw_sq which keeps send-to-vport rule to from the eswitch code to mlx5e and rename it to better reflect where it belongs Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-29net/mlx5: E-Switch, Create generic header struct to be used by representorsMark Bloch5-44/+88
Now that we don't store type dependent data in struct mlx5_eswitch_rep we can create a generic interface, and representor type. struct mlx5_eswitch_rep will store an array of interfaces, each interface is used by a different representor type. Once we moved to a more generic interface, rdma driver representors can be added and utilize the same mechanism as the Ethernet driver representors use. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-28net/mlx4_en: Change default QoS settingsMoni Shoua3-0/+13
Change the default mapping between TC and TCG as follows: Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0 These new settings cause that a pause frame for any prio stops traffic for all prios. Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28net/mlx4_core: Cleanup FMR unmapping flowTariq Toukan1-19/+21
Remove redundant and not essential operations in fmr unmap/free. According to device spec, in FMR unmap it is sufficient to set ownership bit to SW. This allows remapping afterwards. Fixes: 8ad11fb6b073 ("IB/mlx4: Implement FMRs") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28net/mlx4_en: RX csum, reorder branchesTariq Toukan1-25/+21
Use early goto commands, and save else branches. This uses less indentations and brackets, making the code more readable. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28net/mlx4_en: RX csum, remove redundant branches and checksTariq Toukan1-3/+9
Do not check IPv6 bit in cqe status if CONFIG_IPV6 is not enabled. Function check_csum() is reached only with IPv4 or IPv6 set (if enabled), if IPv6 is not set (or is not enabled) it is redundant to test the IPv4 bit. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28net: ethernet: socionext: add AVE ethernet driverKunihiko Hayashi5-0/+1765
The UniPhier platform from Socionext provides the AVE ethernet controller that includes MAC and MDIO bus supporting RGMII/RMII modes. The controller is named AVE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28cxgb4/cxgb4vf: support for XLAUI Port TypeGanesh Goudar4-2/+20
Add support for new Backplane XLAUI port type. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28cxgb4: display VNI correctlyGanesh Goudar1-3/+5
Fix incorrect VNI display in mps_tcam Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 03:18:01 +0000