summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-01-03net: fec: defer probe if regulator is not readyFugang Duan1-0/+4
Defer probe if regulator is not ready. E.g. some regulator is fixed regulator controlled by i2c expander gpio, the i2c device may be probed after the driver, then it should handle the case of defer probe error. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: fec: restore dev_id in the cases of probe errorFugang Duan1-0/+1
The static variable dev_id always plus one before netdev registerred. It should restore the dev_id value in the cases of probe error. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03Merge branch '1GbE' of ↵David S. Miller3-9/+32
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-01-02 This series contains fixes for e1000 and e1000e. Tushar Dave adds a check to the driver so that it won't attempt to disable a device that is already disabled for e1000. Benjamin Poirier provides a fix to e1000e, where a previous commit that Benjamin submitted changed the meaning of the return value for "check_for_link" for copper media and not all the instances were properly updated. Benjamin fixes the remaining instances that needed the change. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625SZ Lin (林上智)1-0/+1
This patch adds support for PID 0x9625 of YUGA CLM920-NC5. YUGA CLM920-NC5 needs to enable QMI_WWAN_QUIRK_DTR before QMI operation. qmicli -d /dev/cdc-wdm0 -p --dms-get-revision [/dev/cdc-wdm0] Device revision retrieved: Revision: 'CLM920_NC5-V1 1 [Oct 23 2016 19:00:00]' Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02e1000e: Fix e1000_check_for_copper_link_ich8lan return value.Benjamin Poirier1-3/+8
e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by: Christian Hesse <list@eworm.de> Reported-by: Gabriel C <nix.or.die@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Christian Hesse <list@eworm.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-02e1000: fix disabling already-disabled warningTushar Dave2-6/+24
This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-02sfp: fix sfp-bus oops when removing socket/upstreamRussell King1-2/+4
When we remove a socket or upstream, and the other side isn't registered, we dereference a NULL pointer, causing a kernel oops. Fix this. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02phylink: ensure we report link down when LOS assertedRussell King1-2/+1
Although we disable the netdev carrier, we fail to report in the kernel log that the link went down. Fix this. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02macvlan: Fix one possible double freeGao Feng1-1/+6
Because the macvlan_uninit would free the macvlan port, so there is one double free case in macvlan_common_newlink. When the macvlan port is just created, then register_netdevice or netdev_upper_dev_link failed and they would invoke macvlan_uninit. Then it would reach the macvlan_port_destroy which triggers the double free. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02mlxsw: spectrum: Relax sanity checks during enslavementIdo Schimmel3-2/+17
Since commit 25cc72a33835 ("mlxsw: spectrum: Forbid linking to devices that have uppers") the driver forbids enslavement to netdevs that already have uppers of their own, as this can result in various ordering problems. This requirement proved to be too strict for some users who need to be able to enslave ports to a bridge that already has uppers. In this case, we can allow the enslavement if the bridge is already known to us, as any configuration performed on top of the bridge was already reflected to the device. Fixes: 25cc72a33835 ("mlxsw: spectrum: Forbid linking to devices that have uppers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02mlxsw: spectrum_router: Fix NULL pointer derefIdo Schimmel1-1/+1
When we remove the neighbour associated with a nexthop we should always refuse to write the nexthop to the adjacency table. Regardless if it is already present in the table or not. Otherwise, we risk dereferencing the NULL pointer that was set instead of the neighbour. Fixes: a7ff87acd995 ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02geneve: update skb dst pmtu on tx pathXin Long1-0/+14
Commit a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") has fixed a performance issue caused by the change of lower dev's mtu for vxlan. The same thing needs to be done for geneve as well. Note that geneve cannot adjust it's mtu according to lower dev's mtu when creating it. The performance is very low later when netperfing over it without fixing the mtu manually. This patch could also avoid this issue. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-7/+46
Pull networking fixes from David Miller: 1) IPv6 gre tunnels end up with different default features enabled depending upon whether netlink or ioctls are used to bring them up. Fix from Alexey Kodanev. 2) Fix read past end of user control message in RDS< from Avinash Repaka. 3) Missing RCU barrier in mini qdisc code, from Cong Wang. 4) Missing policy put when reusing per-cpu route entries, from Florian Westphal. 5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G. Piccoli. 6) Run nested transport mode IPSEC packets via tasklet, from Herbert Xu. 7) Fix handling poll() for stream sockets in tipc, from Parthasarathy Bhuvaragan. 8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert. 9) Another zerocopy ubuf handling fix, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) strparser: Call sock_owned_by_user_nocheck sock: Add sock_owned_by_user_nocheck skbuff: in skb_copy_ubufs unclone before releasing zerocopy tipc: fix hanging poll() for stream sockets sctp: Replace use of sockets_allocated with specified macro. bnx2x: Improve reliability in case of nested PCI errors tg3: Enable PHY reset in MTU change path for 5720 tg3: Add workaround to restrict 5762 MRRS to 2048 tg3: Update copyright net: fec: unmap the xmit buffer that are not transferred by DMA tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path tipc: error path leak fixes in tipc_enable_bearer() RDS: Check cmsg_len before dereferencing CMSG_DATA tcp: Avoid preprocessor directives in tracepoint macro args tipc: fix memory leak of group member when peer node is lost net: sched: fix possible null pointer deref in tcf_block_put tipc: base group replicast ack counter on number of actual receivers net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap() net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ip6_gre: fix device features for ioctl setup ...
2017-12-28Merge tag 'drm-fixes-for-v4.15-rc6' of ↵Linus Torvalds3-4/+5
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "nouveau and i915 regression fixes" * tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix race when adding delayed work items i915: Reject CCS modifiers for pipe C on Geminilake drm/i915/gvt: Fix pipe A enable as default for vgpu
2017-12-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One more fix for the runtime PM clk patches. We're calling a runtime PM API that may schedule from somewhere that we can't do that. We change to the async version of pm_runtime_put() to fix it" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: use atomic runtime pm api in clk_core_is_enabled
2017-12-28Merge tag 'led_fixes_for_4.15-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for brightness setting when delay_off is 0" * tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: core: Fix brightness setting when setting delay_off=0
2017-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds21-105/+204
Pull rdma fixes from Jason Gunthorpe: "This is the next batch of for-rc patches from RDMA. It includes the fix for the ipoib regression I mentioned last time, and the result of a fairly major debugging effort to get iser working reliably on cxgb4 hardware - it turns out the cxgb4 driver was not handling QP error flushing properly causing iser to fail. - cxgb4 fix for an iser testing failure as debugged by Steve and Sagi. The problem was a driver bug in the handling of shutting down a QP. - Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on error unwind and a use after free bug - Improper congestion counter values on mlx5 when link aggregation is enabled - ipoib lockdep regression introduced in this merge window - hfi1 regression supporting the device in a VM introduced in a recent patch - Typo that breaks future uAPI compatibility in the verbs core - More SELinux related oops fixing - Fix an oops during error unwind in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix mlx5_ib_alloc_mr error flow IB/core: Verify that QP is security enabled in create and destroy IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() IB/mlx5: Serialize access to the VMA list IB/hfi: Only read capability registers if the capability exists IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush IB/mlx5: Fix congestion counters in LAG mode RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path iw_cxgb4: when flushing, complete all wrs in a chain iw_cxgb4: reflect the original WR opcode in drain cqes iw_cxgb4: Only validate the MSN for successful completions
2017-12-27IB/mlx5: Fix mlx5_ib_alloc_mr error flowNitzan Carmi1-0/+1
ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27IB/core: Verify that QP is security enabled in create and destroyMoni Shoua2-1/+5
The XRC target QP create flow sets up qp_sec only if there is an IB link with LSM security enabled. However, several other related uAPI entry points blindly follow the qp_sec NULL pointer, resulting in a possible oops. Check for NULL before using qp_sec. Cc: <stable@vger.kernel.org> # v4.12 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()Moni Shoua1-2/+2
If the input command length is larger than the kernel supports an error should be returned in case the unsupported bytes are not cleared, instead of the other way aroudn. This matches what all other callers of ib_is_udata_cleared do and will avoid user ABI problems in the future. Cc: <stable@vger.kernel.org> # v4.10 Fixes: 189aba99e700 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27IB/mlx5: Serialize access to the VMA listMajd Dibbiny2-0/+12
User-space applications can do mmap and munmap directly at any time. Since the VMA list is not protected with a mutex, concurrent accesses to the VMA list from the mmap and munmap can cause data corruption. Add a mutex around the list. Cc: <stable@vger.kernel.org> # v4.7 Fixes: 7c2344c3bbf9 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27led: core: Fix brightness setting when setting delay_off=0Matthieu CASTET1-1/+1
With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set *** stop timer ** led_blink_setup ** led_set_software_blink *** if !delay_on, led off *** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop *** otherwise start timer/set LED_BLINK_SW flag echo xxx > brightness * led_set_brightness ** if LED_BLINK_SW *** if brightness=0, led off *** else apply brightness if next timer <--- timer is stop, and will never apply new setting ** otherwise set led_set_brightness_nosleep To fix that, when we delete the timer, we should clear LED_BLINK_SW. Cc: linux-leds@vger.kernel.org Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-28Merge tag 'drm-intel-fixes-2017-12-22-1' of ↵Dave Airlie2-3/+4
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes GLK pipe C related fix, and a gvt fix. * tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel: i915: Reject CCS modifiers for pipe C on Geminilake drm/i915/gvt: Fix pipe A enable as default for vgpu
2017-12-27bnx2x: Improve reliability in case of nested PCI errorsGuilherme G. Piccoli2-3/+15
While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Enable PHY reset in MTU change path for 5720Siva Reddy Kallam1-1/+2
A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Add workaround to restrict 5762 MRRS to 2048Siva Reddy Kallam2-0/+14
One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Update copyrightSiva Reddy Kallam2-3/+6
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: fec: unmap the xmit buffer that are not transferred by DMAFugang Duan1-0/+6
The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26Merge tag 'hwmon-for-linus-v4.15-rc6' of ↵Linus Torvalds1-4/+17
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Handle errors from thermal subsystem" * tag 'hwmon-for-linus-v4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Deal with errors from the thermal subsystem
2017-12-26Merge tag 'gpio-v4.15-3' of ↵Linus Torvalds5-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two fixes. They are both kind of important, so why not send a pull request on christmas eve. - Fix a build problem in the gpio single register created by refactorings. - Fix assignment of GPIO line names, something that was mangled by another patch" * tag 'gpio-v4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: fix "gpio-line-names" property retrieval gpio: gpio-reg: fix build
2017-12-26clk: use atomic runtime pm api in clk_core_is_enabledDong Aisheng1-1/+2
Current clk_pm_runtime_put is using pm_runtime_put_sync which is not safe to be called in clk_core_is_enabled as it should be able to run in atomic context. Thus use pm_runtime_put instead which is atomic safe. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-27Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixesDave Airlie1-1/+1
one nouveau regression fix * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau: fix race when adding delayed work items
2017-12-26hwmon: Deal with errors from the thermal subsystemLinus Walleij1-4/+17
If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored. I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-12-26net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaroundGrygorii Strashko1-0/+1
Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-25phylink: ensure AN is enabledRussell King1-0/+1
Ensure that we mark AN as enabled at boot time, rather than leaving it disabled. This is noticable if your SFP module is fiber, and it supports faster speeds than 1G with 2.5G support in place. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-25phylink: ensure the PHY interface mode is appropriately setRussell King1-0/+1
When setting the ethtool settings, ensure that the validated PHY interface mode is propagated to the current link settings, so that 2500BaseX can be selected. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-23Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds4-41/+236
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "These fixes are all tagged for -stable and have received a build success notification from the kbuild robot. - NVDIMM namespaces, configured to enforce 1GB alignment, fail to initialize on platforms that mis-align the start or end of the physical address range. - The Linux implementation of the BTT (Block Translation Table) is incompatible with the UEFI 2.7 definition of the BTT format. The BTT layers a software atomic sector semantic on top of an NVDIMM namespace. Linux needs to be compatible with the UEFI definition to enable boot support or any pre-OS access of data on a BTT enabled namespace. - A fix for ACPI SMART notification events, this allows a userspace monitor to register for health events rather than poll. This has been broken since it was initially merged as the unit test inadvertently worked around the problem. The urgency for fixing this during the -rc series is driven by how expensive it is to poll for this data (System Management Mode entry)" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, btt: Fix an incompatibility in the log layout libnvdimm, btt: add a couple of missing kernel-doc lines libnvdimm, dax: fix 1GB-aligned namespaces vs physical misalignment libnvdimm, pfn: fix start_pad handling for aligned namespaces acpi, nfit: fix health event notification
2017-12-23drm/nouveau: fix race when adding delayed work itemsBen Skeggs1-1/+1
kernel.org bz#198221. Reported-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-12-22Merge tag 'for-linus-4.15-rc5-tag' of ↵Linus Torvalds1-9/+56
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two fixes for running under Xen: - a fix avoiding resource conflicts between adding mmio areas and memory hotplug - a fix setting NX bits in page table entries copied from Xen when running a PV guest" * tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Mark unallocated host memory as UNUSABLE x86-64/Xen: eliminate W+X mappings
2017-12-22Merge tag 'pinctrl-v4.15-3' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fix from Linus Walleij: "A single pin control fix for Intel machines, affecting a bunch of Chromebooks. Nothing else collected up amazingly" * tag 'pinctrl-v4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: cherryview: Mask all interrupts on Intel_Strago based systems
2017-12-22Merge tag 'drm-fixes-for-v4.15-rc5' of ↵Linus Torvalds31-146/+267
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "I've got most of two weeks worth of fixes here due to being on holidays last week. The main things are: - Core: * Syncobj fd reference count fix * Leasing ioctl misuse fix - nouveau regression fixes - further amdgpu DC fixes - sun4i regression fixes I'm not sure I'll see many fixes over next couple of weeks, we'll see how we go" * tag 'drm-fixes-for-v4.15-rc5' of git://people.freedesktop.org/~airlied/linux: (27 commits) drm/syncobj: Stop reusing the same struct file for all syncobj -> fd drm: move lease init after validation in drm_lease_create drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers drm/sun4i: hdmi: Move the mode_valid callback to the encoder drm/nouveau: fix obvious memory leak drm/i915: Protect DDI port to DPLL map from theoretical race. drm/i915/lpe: Remove double-encapsulation of info string drm/sun4i: Fix error path handling drm/nouveau: use alternate memory type for system-memory buffers with kind != 0 drm/nouveau: avoid GPU page sizes > PAGE_SIZE for buffer objects in host memory drm/nouveau/mmu/gp10b: use correct implementation drm/nouveau/pci: do a msi rearm on init drm/nouveau/imem/nv50: fix refcount_t warning drm/nouveau/bios/dp: support DP Info Table 2.0 drm/nouveau/fbcon: fix NULL pointer access in nouveau_fbcon_destroy drm/amd/display: Fix rehook MST display not light back on drm/amd/display: fix missing pixel clock adjustment for dongle drm/amd/display: set chroma taps to 1 when not scaling drm/amd/display: add pipe locking before front end programing drm/sun4i: validate modes for HDMI ...
2017-12-22Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Here's a trio of fixes: - The runtime PM clk patches that landed this merge window forgot to runtime resume devices that may be off while recalculating and setting rates of child clks of whatever clk is changing rates. - We had a NULL pointer deref in an old clk tracepoint when clk_set_parent() is called with a NULL parent pointer. This shouldn't really happen, but it's best to avoid this regardless. - The sun9i-mmc clk driver didn't provide 'reset' support, just 'assert' and 'deassert' so the MMC driver stopped probing when the probe was changed to do a reset instead of assert/deassert pair. This implements the reset so things work again" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi: sun9i-mmc: Implement reset callback for reset controls clk: fix a panic error caused by accessing NULL pointer clk: Manage proper runtime PM state in clk_change_rate()
2017-12-22IB/hfi: Only read capability registers if the capability existsMichael J. Ruhl2-19/+12
During driver init, various registers are saved to allow restoration after an FLR or gen3 bump. Some of these registers are not available in some circumstances (i.e. Virtual machines). This bug makes the driver unusable when the PCI device is passed into a VM, it fails during probe. Delete unnecessary register read/write, and only access register if the capability exists. Cc: <stable@vger.kernel.org> # 4.14.x Fixes: a618b7e40af2 ("IB/hfi1: Move saving PCI values to a separate function") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-22gpio: fix "gpio-line-names" property retrievalChristophe Leroy4-13/+12
Following commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), "gpio-line-names" DT property is not retrieved anymore when chip->parent is not set by the driver. This is due to OF based property reads having been replaced by device based property reads. This patch fixes that by making use of fwnode_property_read_string_array() instead of device_property_read_string_array() and handing over either of_fwnode_handle(chip->of_node) or dev_fwnode(chip->parent) to that function. Fixes: 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22gpio: gpio-reg: fix buildGrygorii Strashko1-2/+2
Revert changes introduced by commit f0fbe7bce733 ("gpio: Move irqdomain into struct gpio_irq_chip") as they are not aplicable to this driver. Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Fixes: f0fbe7bce733 ("gpio: Move irqdomain into struct gpio_irq_chip") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22drm/syncobj: Stop reusing the same struct file for all syncobj -> fdChris Wilson1-48/+29
The vk cts test: dEQP-VK.api.external.semaphore.opaque_fd.export_multiple_times_temporary triggers a lot of VFS: Close: file count is 0 Dave pointed out that clearing the syncobj->file from drm_syncobj_file_release() was sufficient to silence the test, but that opens a can of worm since we assumed that the syncobj->file was never unset. Stop trying to reuse the same struct file for every fd pointing to the drm_syncobj, and allocate one file for each fd instead. v2: Fixup return handling of drm_syncobj_fd_to_handle v2.1: [airlied: fix possible syncobj ref race] Reported-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-12-22Merge tag 'drm-misc-fixes-2017-12-21' of ↵Dave Airlie4-35/+53
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes before holidays: - fixup for the lease fixup (Keith) - fb leak in the ww mutex fallback code (Maarten) - sun4i fixes (Maxime, Hans) * tag 'drm-misc-fixes-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc: drm: move lease init after validation in drm_lease_create drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers drm/sun4i: hdmi: Move the mode_valid callback to the encoder drm/sun4i: Fix error path handling drm/sun4i: validate modes for HDMI
2017-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds35-173/+494
Pull networking fixes from David Miller" "What's a holiday weekend without some networking bug fixes? [1] 1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function calls, from Daniel Borkmann. 2) Fix regression from errata limiting change to marvell PHY driver, from Zhao Qiang. 3) Fix u16 overflow in SCTP, from Xin Long. 4) Fix potential memory leak during bridge newlink, from Nikolay Aleksandrov. 5) Fix BPF selftest build on s390, from Hendrik Brueckner. 6) Don't append to cfg80211 automatically generated certs file, always write new ones from scratch. From Thierry Reding. 7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai. 8) Fix hang on tg3 MTU change with certain chips, from Brian King. 9) Add stall detection to arc emac driver and reset chip when this happens, from Alexander Kochetkov. 10) Fix MTU limitng in GRE tunnel drivers, from Xin Long. 11) Fix stmmac timestamping bug due to mis-shifting of field. From Fredrik Hallenberg. 12) Fix metrics match when deleting an ipv4 route. The kernel sets some internal metrics bits which the user isn't going to set when it makes the delete request. From Phil Sutter. 13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix from Yelena Krivosheev. 14) Fix double free and memory corruption in get_net_ns_by_id, from Eric W. Biederman. 15) Flush ipv4 FIB tables in the reverse order. Some tables can share their actual backing data, in particular this happens for the MAIN and LOCAL tables. We have to kill the LOCAL table first, because it uses MAIN's backing memory. Fix from Ido Schimmel. 16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann Horn, and Alexei Starovoitov. 17) Make changes to ipv6 autoflowlabel sysctl really propagate to sockets, unless the socket has set the per-socket value explicitly. From Shaohua Li. 18) Fix leaks and double callback invocations of zerocopy SKBs, from Willem de Bruijn" [1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) skbuff: skb_copy_ubufs must release uarg even without user frags skbuff: orphan frags before zerocopy clone net: reevalulate autoflowlabel setting after sysctl setting openvswitch: Fix pop_vlan action for double tagged frames ipv6: Honor specified parameters in fibmatch lookup bpf: do not allow root to mangle valid pointers selftests/bpf: add tests for recent bugfixes bpf: fix integer overflows bpf: don't prune branches when a scalar is replaced with a pointer bpf: force strict alignment checks for stack pointers bpf: fix missing error return in check_stack_boundary() bpf: fix 32-bit ALU op verification bpf: fix incorrect tracking of register size truncation bpf: fix incorrect sign extension in check_alu_op() bpf/verifier: fix bounds calculation on BPF_RSH ipv4: Fix use-after-free when flushing FIB tables s390/qeth: fix error handling in checksum cmd callback tipc: remove joining group member from congested list selftests: net: Adding config fragment CONFIG_NUMA=y nfp: bpf: keep track of the offloaded program ...
2017-12-21IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flushAlex Vesker1-4/+3
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B), contradicts other flows such as ipoib_open possibly causing a deadlock. To prevent this deadlock heavy flush is called with RTNL locked and only then tries to acquire vlan_rwsem. This deadlock is possible only when there are child interfaces. [ 140.941758] ====================================================== [ 140.946276] WARNING: possible circular locking dependency detected [ 140.950950] 4.15.0-rc1+ #9 Tainted: G O [ 140.954797] ------------------------------------------------------ [ 140.959424] kworker/u32:1/146 is trying to acquire lock: [ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 140.970006] but task is already holding lock: [ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib] [ 140.982105] which lock already depends on the new lock. [ 140.990023] the existing dependency chain (in reverse order) is: [ 140.998650] -> #1 (&priv->vlan_rwsem){++++}: [ 141.005276] down_read+0x4d/0xb0 [ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib] [ 141.014400] __dev_open+0xcb/0x140 [ 141.017919] __dev_change_flags+0x1a4/0x1e0 [ 141.022133] dev_change_flags+0x23/0x60 [ 141.025695] devinet_ioctl+0x704/0x7d0 [ 141.029156] sock_do_ioctl+0x20/0x50 [ 141.032526] sock_ioctl+0x221/0x300 [ 141.036079] do_vfs_ioctl+0xa6/0x6d0 [ 141.039656] SyS_ioctl+0x74/0x80 [ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 141.046891] -> #0 (rtnl_mutex){+.+.}: [ 141.051701] lock_acquire+0xd4/0x220 [ 141.055212] __mutex_lock+0x88/0x970 [ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib] [ 141.067648] process_one_work+0x1f5/0x610 [ 141.071429] worker_thread+0x4a/0x3f0 [ 141.074890] kthread+0x141/0x180 [ 141.078085] ret_from_fork+0x24/0x30 [ 141.081559] other info that might help us debug this: [ 141.088967] Possible unsafe locking scenario: [ 141.094280] CPU0 CPU1 [ 141.097953] ---- ---- [ 141.101640] lock(&priv->vlan_rwsem); [ 141.104771] lock(rtnl_mutex); [ 141.109207] lock(&priv->vlan_rwsem); [ 141.114032] lock(rtnl_mutex); [ 141.116800] *** DEADLOCK *** Fixes: b4b678b06f6e ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-21IB/mlx5: Fix congestion counters in LAG modeMajd Dibbiny4-42/+62
Congestion counters are counted and queried per physical function. When working in LAG mode, CNP packets can be sent or received on both of the functions, thus congestion counters should be aggregated from the two physical functions. Fixes: e1f24a79f424 ("IB/mlx5: Support congestion related counters") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-16 16:48:36 +0000