summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-10-17fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000Moritz Fischer3-0/+539
This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: sram: extend usage of reserved partitionsVladimir Zapolskiy1-8/+188
This change adds functionality to operate on reserved SRAM partitions described in device tree file. Two partition properties are added, "pool" and "export", the first one allows to share a specific partition for usage by a kernel consumer in the same manner as it is done for the whole SRAM device, and "export" property provides access to some SRAM area from userspace over sysfs interface. Practically it is possible to specify both properties for an SRAM partition, however simultaneous access from a kernel consumer and from userspace is not serialized, but still the combination may be useful for debugging purpose. The change opens the following scenarios of SRAM usage: * updates in a particular SRAM area specified by offset and size are done by bootloader, then this information is utilized by the kernel, * a particular SRAM area is rw accessed from userspace, the stored data is persistent on soft reboots, * a device driver secures SRAM area for its purposes, * etc. Note, strictly speaking the added optional properties describe policy of SRAM usage, rather than hardware, but here the policy mostly resembles flash partitions in devicetree, which is undoubtedly a very popular option but it does not describe hardware. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: mic/scif: fix error code in scif_create_remote_lookup()Dan Carpenter1-2/+6
We should be returning -ENOMEM here instead of success. Fixes: ba612aa8b487 ('misc: mic: SCIF memory registration and unregistration') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: mic/scif: re-take a lock on error pathDan Carpenter1-0/+1
The caller expects that we take this lock again before returning otherwise it you get double unlocks and races. Fixes: ba612aa8b487 ('misc: mic: SCIF memory registration and unregistration') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17mei: amthif: Do not compare bool to 0/1Alexander Usyskin1-1/+1
Spotted by coccicheck: drivers/misc/mei/amthif.c:479:5-26: WARNING: Comparison of bool to 0/1 Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17mei: bus: fix c&p issue in the kdocTomas Winkler1-2/+2
s/send/receive/ The buffer in the receive function is not used for sending Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17mei: fix the KDoc formatingAlexander Usyskin2-11/+12
KDoc function section start with double start: /** instead of /* Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17mei: keep the device awake during reads in chunksAlexander Usyskin1-0/+4
Long messages are read in chunks, to prevent trashing runtime pm between the reading of the chunks we call pm_runtime_mark_last_busy() on non-final chunk message as the next chunk of the same message will be received immediately in the next interrupt with high probablity. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17mei: cancel driver workers only after client devices were removedTomas Winkler1-2/+2
In process of client devices removal from the bus there still might be communication between a driver and the mei device hence we need to cancel supporting workers only after all the client devices were removed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17W1: w1-gpio - switch to using dev_pm_opsDmitry Torokhov1-13/+7
Let's stop using legacy platform driver hooks for power management and switch to using the standard dev_pm_ops-based hooks. Also, instead of guarding PM methods with #ifdef CONFIG_PM annotate them as __maybe_unused as it provides better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: mic: fix memory leakSudip Mukherjee1-1/+18
In scif_node_connect() we were returning if the initialization of p2p_ji fails. But at that time p2p_ij has already been initialized and resources allocated for it. And since p2p_ij is not added to the list till now so we will have a leak. Lets deinitialize and release the resources connected to p2p_ij. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: mic: replace kfree with put_deviceGeliang Tang3-3/+3
Handle a failed device_register(), replace kfree() with put_device(), which will call cosm/mbus/scif_release_dev(). Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17misc: mic: Fix randconfig build errorAshutosh Dixit1-0/+1
Fixes randconfig build error reported at http://www.spinics.net/lists/kernel/msg2092346.html Reported-by: Jim Davis <jim.epost@gmail.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16intel_th: Check for NULL instead of ERR_PTRDan Carpenter4-10/+10
devm_ioremap() returns NULL on error, it doesn't return an ERR_PTR, which is what the current code does. This patch corrects these checks. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16stm class: Select configfsAlexander Shishkin1-0/+1
STM policy handling is basically configfs, I honestly don't know how we ended up without a Kconfig dependency, but thanks to randconfig testing, it's now caught. Reported-by: Jim Davis <jim.epost@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-16Merge tag 'extcon-next-for-4.4' of ↵Greg Kroah-Hartman11-204/+303
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 4.4 Detailed description for patchset: 1. Update the extcon core: - Modify the unique identification and name of each external connector with the additional prefix to clarify both attribute and meaning of external connector as following: : EXTCON_CHG_* mean the charger connector. : EXTCON_JACK_* mean the jack connector. : EXTCON_DISP_* mean the display port connector. - Keep the standard name of USB charging port by refering to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following: : EXTCON_CHG_USB_SDP /* Standard Downstream Port */ : EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ : EXTCON_CHG_USB_CDP /* Charging Downstream Port */ : EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip 2. Update the extcon-arizona.c driver: - Support the WM8998 and WM1814 codec for jack detection. - Support for the ADC mode microphone detection and the general purpose switch for pop suppression. - Fix bug include fixing the headphone detection accuracy at the top end of the range and some corrections around the use of the microphone clamps. 3. Update the extcon-gpio.c driver: - Clean-up the extcon-gpio driver and fix minor issue before supporting the Device tree binding of it. 4. Clean-up and fix the minor issue for extcon drivers: - Export OF module alias information for extcon-rt8973a.c and extcon-sm5502.c. - Fix wrong type of variable of for extcon-rt8973a.c and extcon-sm5502.c. - Use resource managed API for extcon-axp288.c.
2015-10-16extcon: Modify the id and name of external connectorChanwoo Choi9-93/+103
This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [ckeepax: For the Arizona changes] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-10-12Merge 4.3-rc5 into char-misc nextGreg Kroah-Hartman57-151/+304
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-11Merge tag 'scsi-fixes' of ↵Linus Torvalds3-14/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of three bug fixes, two of which are regressions from recent updates (the 3ware one from 4.1 and the device handler fixes from 4.2)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: don't unmap bounce buffered commands scsi_dh: Use the correct module name when loading device handler libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
2015-10-11Merge tag 'md/4.3-rc4-fix' of git://neil.brown.name/mdLinus Torvalds2-4/+4
Pull md bugfix from Neil Brown: "One bug fix for raid1/raid10. Very careless bug earler in 4.3-rc, now fixed :-)" * tag 'md/4.3-rc4-fix' of git://neil.brown.name/md: crash in md-raid1 and md-raid10 due to incorrect list manipulation
2015-10-10intel_th: Fix integer mismatch warningsAlexander Shishkin1-1/+1
Use unsigned long in place of size_t to operate on buffer sizes and offsets to clean up the 32 bit build. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-10stm class: Mark src::link __rcuAlexander Shishkin2-4/+7
Source device's link is protected with srcu, mark it as such to have proper build-time validation of accesses to this field. The update side that's dereferencing it under an update lock also needs an accessor to dereference this field to keep sparse happy. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-10Merge tag 'usb-4.3-rc5' of ↵Linus Torvalds7-3/+41
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB and PHY fixes and quirk updates for 4.3-rc5. Nothing major here, full details in the shortlog, and all of these have been in linux-next for a while" * tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Add device quirk for Logitech PTZ cameras USB: chaoskey read offset bug USB: Add reset-resume quirk for two Plantronics usb headphones. usb: renesas_usbhs: Add support for R-Car H3 usb: renesas_usbhs: fix build warning if 64-bit architecture usb: gadget: bdc: fix memory leak phy: berlin-sata: Fix module autoload for OF platform driver phy: rockchip-usb: power down phy when rockchip phy probe phy: qcom-ufs: fix build error when the component is built as a module
2015-10-10Merge tag 'tty-4.3-rc5' of ↵Linus Torvalds6-28/+79
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a few bug fixes for the tty core that resolve reported issues, and some serial driver fixes as well (including the much-reported imx driver problem) All of these have been in linux-next with no reported problems" * tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: drivers/tty: require read access for controlling terminal serial: 8250: add uart_config entry for PORT_RT2880 tty: fix data race on tty_buffer.commit tty: fix data race in tty_buffer_flush tty: fix data race in flush_to_ldisc tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c serial: atmel: fix error path of probe function tty: don't leak cdev in tty_cdev_add() Revert "serial: imx: remove unbalanced clk_prepare"
2015-10-10Merge tag 'staging-4.3-rc5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes for 4.3-rc5. One fixes the broken speakup subsystem as reported by a user, and the other removes an entry in the MAINTAINERS file for a developer that doesn't want to be listed anymore" * tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: speakup: fix speakup-r regression MAINTAINERS: Remove myself as nvec co-maintainer
2015-10-10Merge tag 'char-misc-4.3-rc5' of ↵Linus Torvalds4-8/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small fixes for some misc drivers that resolve some reported issues. All of these have been linux-next for a while" * tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: Fix error handling in mcb_pci_probe() mei: hbm: fix error in state check logic nvmem: sunxi: Check for memory allocation failure nvmem: core: Fix memory leak in nvmem_cell_write nvmem: core: Handle shift bits in-place if cell->nbits is non-zero nvmem: core: fix the out-of-range leak in read/write()
2015-10-09Merge tag 'pm+acpi-4.3-rc5' of ↵Linus Torvalds3-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are four fixes for bugs in the devfreq and cpufreq subsystems, including two regression fixes (one for a recent regression and one for a problem introduced in 4.2). Specifics: - Two fixes for cpufreq regressions, an acpi-cpufreq driver one introduced during the 4.2 cycle when we started to preserve cpufreq directories for offline CPUs and a general one introduced recently (Srinivas Pandruvada). - Two devfreq fixes, one for a double kfree() in an error code path and one for a confusing sysfs-related failure (Geliang Tang, Tobias Jakobi)" * tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: prevent lockup on reading scaling_available_frequencies cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus PM / devfreq: fix double kfree PM / devfreq: Fix governor_store()
2015-10-09Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-25/+9
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A Samsung driver fix and a handful of TI driver fixes" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: dflt: fix enable_reg validity check clk: ti: fix dual-registration of uart4_ick clk: ti: clk-7xx: Remove hardwired ABE clock configuration clk: samsung: fix cpu clock's flags checking
2015-10-09Merge tag 'mmc-v4.3-rc4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds5-6/+22
Pull MMC fixes from Ulf Hansson: "MMC host: - omap_hsmmc: Fix boot regressions for omap4430 - omap_hsmmc: Fix legacy boot regression for omap3 - sdhci-pxav3: Fix some clock issues for Armada 38x - sdhci-pxav3: Fix error handling at probe - sdhci-of-at91: Fix clock stabilization problem" * tag 'mmc-v4.3-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST mmc: sdhci-pxav3: fix error handling of armada_38x_quirks mmc: sdhci-pxav3: disable clock inversion for HS MMC cards mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"
2015-10-09Merge tag 'dm-4.3-fixes-2' of ↵Linus Torvalds8-24/+37
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull dm fixes from Mike Snitzer: "Three stable fixes: - DM core AB-BA deadlock fix in the device destruction path (vs device creation's DM table swap). - DM raid fix to properly round up the region_size to the next power-of-2. - DM cache fix for a NULL pointer seen while switching from the "cleaner" cache policy. Two fixes for regressions introduced during the 4.3 merge: - request-based DM error propagation regressed due to incorrect changes introduced when adding the bi_error field to bio. - DM snapshot fix to only support snapshots that overflow if the client (e.g. lvm2) is prepared to deal with the associated snapshot status interface change" * tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: add new persistent store option to support overflow dm cache: fix NULL pointer when switching from cleaner policy dm: fix request-based dm error reporting dm raid: fix round up of default region size dm: fix AB-BA deadlock in __dm_destroy()
2015-10-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "The fixes for this week include one small patch that was years in the making and that finally fixes using all eight CPUs on exynos542x. The rest are lots of minor changes for sunxi, imx, exynos and shmobile - fixing the minimum voltage for Allwinner A20 - thermal boot issue on SMDK5250. - invalid clock used for FIMD IOMMU. - audio on Renesas r8a7790/r8a7791 - invalid clock used for FIMD IOMMU - LEDs on exynos5422-odroidxu3-common - usb pin control for imx-rex - imx53: fix PMIC interrupt level - a Makefile typo" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420 ARM: dts: Fix bootup thermal issue on smdk5250 ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound arm-cci500: Don't enable PMU driver by default ARM: dts: fix usb pin control for imx-rex dts ARM: imx53: qsrb: fix PMIC interrupt level ARM: imx53: include IRQ dt-bindings header ARM: dts: add suspend opp to exynos4412 ARM: dts: Fix LEDs on exynos5422-odroidxu3 ARM: EXYNOS: reset Little cores when cpu is up ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
2015-10-09dm snapshot: add new persistent store option to support overflowMike Snitzer5-15/+30
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported by the snapshot device's status. Older userspace (e.g. lvm2) does not handle the "Overflow" status response. Fix this incompatibility by requiring newer userspace code, that can cope with "Overflow", request the persistent store with overflow support by using "PO" (Persistent with Overflow) for the snapshot store type. Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Fixes: 76c44f6d80 ("dm snapshot: don't invalidate on-disk image on snapshot write overflow") Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-09Merge branches 'pm-devfreq' and 'pm-cpufreq'Rafael J. Wysocki120-778/+880
* pm-devfreq: PM / devfreq: fix double kfree PM / devfreq: Fix governor_store() * pm-cpufreq: cpufreq: prevent lockup on reading scaling_available_frequencies cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
2015-10-09dm cache: fix NULL pointer when switching from cleaner policyJoe Thornber1-1/+1
The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-10-09crash in md-raid1 and md-raid10 due to incorrect list manipulationMikulas Patocka2-4/+4
The commit 55ce74d4bfe1b9444436264c637f39a152d1e5ac (md/raid1: ensure device failure recorded before write request returns) is causing crash in the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100% reproducible. The reason for the crash is that the newly added code in raid1d moves the list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and then incorrectly pops the bio from conf->bio_end_io_list (which is empty because the list was alrady moved). Raid-10 has a similar bug. Kernel Fault: Code=15 regs=000000006ccb8640 (Addr=0000000100000000) CPU: 3 PID: 1930 Comm: mdX_raid1 Not tainted 4.2.0-rc5-bisect+ #35 task: 000000006cc1f258 ti: 000000006ccb8000 task.ti: 000000006ccb8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111000001111 Not tainted r00-03 000000ff0804fe0f 000000001059d000 000000001059f818 000000007f16be38 r04-07 000000001059d000 000000007f16be08 0000000000200200 0000000000000001 r08-11 000000006ccb8260 000000007b7934d0 0000000000000001 0000000000000000 r12-15 000000004056f320 0000000000000000 0000000000013dd0 0000000000000000 r16-19 00000000f0d00ae0 0000000000000000 0000000000000000 0000000000000001 r20-23 000000000800000f 0000000042200390 0000000000000000 0000000000000000 r24-27 0000000000000001 000000000800000f 000000007f16be08 000000001059d000 r28-31 0000000100000000 000000006ccb8560 000000006ccb8640 0000000000000000 sr00-03 0000000000249800 0000000000000000 0000000000000000 0000000000249800 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 000000001059f61c 000000001059f620 IIR: 0f8010c6 ISR: 0000000000000000 IOR: 0000000100000000 CPU: 3 CR30: 000000006ccb8000 CR31: 0000000000000000 ORIG_R28: 000000001059d000 IAOQ[0]: call_bio_endio+0x34/0x1a8 [raid1] IAOQ[1]: call_bio_endio+0x38/0x1a8 [raid1] RP(r2): raid_end_bio_io+0x88/0x168 [raid1] Backtrace: [<000000001059f818>] raid_end_bio_io+0x88/0x168 [raid1] [<00000000105a4f64>] raid1d+0x144/0x1640 [raid1] [<000000004017fd5c>] kthread+0x144/0x160 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 55ce74d4bfe1 ("md/raid1: ensure device failure recorded before write request returns.") Fixes: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-08cpufreq: prevent lockup on reading scaling_available_frequenciesSrinivas Pandruvada1-1/+3
When scaling_available_frequencies is read on an offlined cpu, then either lockup or junk values are displayed. This is caused by freed freq_table, which policy is using. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-08cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpusSrinivas Pandruvada1-0/+3
When freqdomain_cpus attribute is read from an offlined cpu, it will cause crash. This change prevents calling cpufreq_show_cpus when policy driver_data is NULL. Crash info: [ 170.814949] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 170.814990] IP: [<ffffffff813b2490>] _find_next_bit.part.0+0x10/0x70 [ 170.815021] PGD 227d30067 PUD 229e56067 PMD 0 [ 170.815043] Oops: 0000 [#2] SMP [ 170.816022] CPU: 3 PID: 3121 Comm: cat Tainted: G D OE 4.3.0-rc3+ #33 ... ... [ 170.816657] Call Trace: [ 170.816672] [<ffffffff813b2505>] ? find_next_bit+0x15/0x20 [ 170.816696] [<ffffffff8160e47c>] cpufreq_show_cpus+0x5c/0xd0 [ 170.816722] [<ffffffffa031a409>] show_freqdomain_cpus+0x19/0x20 [acpi_cpufreq] [ 170.816749] [<ffffffff8160e65b>] show+0x3b/0x60 [ 170.816769] [<ffffffff8129b31c>] sysfs_kf_seq_show+0xbc/0x130 [ 170.816793] [<ffffffff81299be3>] kernfs_seq_show+0x23/0x30 [ 170.816816] [<ffffffff81240f2c>] seq_read+0xec/0x390 [ 170.816837] [<ffffffff8129a64a>] kernfs_fop_read+0x10a/0x160 [ 170.816861] [<ffffffff8121d9b7>] __vfs_read+0x37/0x100 [ 170.816883] [<ffffffff813217c0>] ? security_file_permission+0xa0/0xc0 [ 170.816909] [<ffffffff8121e2e3>] vfs_read+0x83/0x130 [ 170.816930] [<ffffffff8121f035>] SyS_read+0x55/0xc0 ... ... [ 170.817185] ---[ end trace bc6eadf82b2b965a ]--- Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-08mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirkludovic.desroches@atmel.com1-0/+1
The Atmel sdhci device needs the SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the internal clock could never stabilised when changing the sd clock frequency. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RSTludovic.desroches@atmel.com2-0/+7
The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock Control Register to 0 before computing the new value and writing it. It disables the internal clock which causes a reset mecanism. If we write the new value before this reset mecanism is done, it will prevent the stabilisation of the internal clock, so a delay is needed. This delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is used. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: fix error handling of armada_38x_quirksMarcin Wojtas1-1/+1
In case of armada_38x_quirks error, all clocks should be cleaned-up, same as after mv_conf_mbus_windows failure. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: disable clock inversion for HS MMC cardsNadav Haklai1-0/+3
According to 'FE-2946959' erratum the clock inversion option is needed to support slow frequencies when the card input hold time requirement is high. This setting is not required for high speed MMC and might cause timing violation. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driverNadav Haklai1-0/+1
shci-pxav3 driver is enabling by default the SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not required for Armada 38x and leads to wrong clock setting in the divider. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: host: omap_hsmmc: Fix MMC for omap3 legacy bootingTony Lindgren1-3/+3
Starting with commit 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") MMC on omap3 stopped working for legacy booting. This is because legacy booting sets up some of the resource in the platform init code, and for optional regulators always seem to return -EPROBE_DEFER for the legacy booting. Let's fix the issue by checking for device tree based booting for now. Then when omap3 boots in device tree only mode, this patch can be just reverted. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"Tony Lindgren1-2/+6
This reverts commit c55d7a0553643a7e8f120688b82b594471084d3c. Without reverting this commit we get "unbalanced disables for pbias_mmc_omap4" errors on omap4430. It seems that 4430 and 4460 behave in a different way for the PBIAS regulator registers and until that has been debugged further we cannot rely on the regulator status registers in hardare on 4430. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-073w-9xxx: don't unmap bounce buffered commandsChristoph Hellwig1-7/+21
3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by: Tóth Attila <atoth@atoth.sote.hu> Tested-by: Tóth Attila <atoth@atoth.sote.hu> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-07fpga manager: add driver for socfpga fpga managerAlan Tull3-0/+627
Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07add FPGA manager coreAlan Tull5-0/+407
API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07Merge tag 'fbdev-fixes-4.3' of ↵Linus Torvalds7-8/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fbdev: Minor fixes to broadsheetfb, fsl-diu-fb, mb862xxfb, tridentfb, omapfb - display-timing: Fix memory leak in error path * tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: of: fix memory leak fbdev: broadsheetfb: fix memory leak OMAPDSS: panel-sony-acx565akm: Export OF module alias information fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320 tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZE video: fbdev: mb862xx: Fix module autoload for OF platform driver video: fbdev: fsl: Fix the sleep function for FSL DIU module
2015-10-07coresight: etm3x: making error message unambiguousMathieu Poirier1-2/+4
By adding the function name at the beginning of the error message there is no doubt as to where the failing condition occurred. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07coresight: etm3x: breaking down sysFS status interfaceMathieu Poirier1-49/+51
SysFS rules stipulate that only one value can be conveyed per file. As such splitting the "status" interface in individual files. This is also useful for user space applications - that way they can probe each file individually rather than having to parse a list of entries. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-17 07:39:45 +0000