summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-04-05sfc: don't insert mc_list on low-latency firmware if it's too longEdward Cree1-2/+8
If the mc_list is longer than 256 addresses, we enter mc_promisc mode. If we're in mc_promisc mode and the firmware doesn't support cascaded multicast, normally we also insert our mc_list, to prevent stealing by another VI. However, if the mc_list was too long, this isn't really helpful - the MC groups that didn't fit in the list can still get stolen, and having only some of them stealable will probably cause more confusing behaviour than having them all stealable. Since inserting 256 multicast filters takes a long time and can lead to MCDI state machine timeouts, just skip the mc_list insert in this overflow condition. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: add support for .set_link_ksettings()Jakub Kicinski1-0/+46
Support setting link speed and autonegotiation through set_link_ksettings() ethtool op. If the port is reconfigured in incompatible way and reboot is required the netdev will get unregistered and not come back until user reboots the system. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: NSP backend for link configuration operationsJakub Kicinski3-14/+179
Add NSP backend for upcoming link configuration operations. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: add extended error messagesJakub Kicinski1-8/+29
Allow NSP to set option code even when error is reported. This provides a way for NSP to give user more precise information about why command failed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: turn NSP port entry into a unionJakub Kicinski1-13/+25
Make NSP port structure a union to simplify accessing the fields from generic macros. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: allow multi-stage NSP configurationJakub Kicinski4-31/+138
NSP commands may be slow to respond, we should try to avoid doing a command-per-item when user requested to change multiple parameters for instance with an ethtool .set_settings() command. Introduce a way of internal NSP code to carry state in NSP structure and add start/finish calls to perform the initialization and kick off of the configuration request, with potentially many parameters being modified in between. nfp_eth_set_mod_enable() will make use of the new code internally, other "set" functions to follow. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: separate high level and low level NSP headersJakub Kicinski8-20/+22
We will soon add more NSP commands and structure definitions. Move all high-level NSP header contents to a common nfp_nsp.h file. Right now it mostly boils down to renaming nfp_nsp_eth.h and moving some functions from nfp.h there. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: report port type in ethtoolJakub Kicinski3-0/+46
Service process firmware provides us with information about media and interface (SFP module) plugged in, translate that to Linux's PORT_* defines and report via ethtool. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: report auto-negotiation in ethtoolJakub Kicinski3-0/+17
NSP ABI version 0.17 is exposing the autonegotiation settings. Report whether autoneg is on via ethtool. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: report link speed from NSPJakub Kicinski1-0/+11
On the PF prefer the link speed value provided by the NSP. Refresh port table if needed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: add port state refreshJakub Kicinski3-8/+85
We will need a way of refreshing port state for link settings get/set. For get we need to refresh port speed and type. When settings are changed the reconfiguration may require reboot before it's effective. Unregister netdevs affected by reconfiguration from a workqueue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: track link state changesJakub Kicinski2-1/+19
For caching link settings - remember if we have seen link events since the last time the eth_port information was refreshed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: add mutex protection for the port listJakub Kicinski3-4/+21
We will want to unregister netdevs after their port got reconfigured. For that we need to make sure manipulations of port list from the port reconfiguration flow will not race with driver's .remove() callback. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: don't spawn netdevs for reconfigured portsJakub Kicinski4-37/+62
After port reconfiguration (port split, media type change) firmware will continue to report old configuration until reboot. NSP will inform us that reconfiguration is pending. To avoid user confusion refuse to spawn netdevs until the new configuration is applied (reboot). We need to split the netdev to eth_table port matching from MAC search and move it earlier in the probe() flow. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05nfp: add support for .get_link_ksettings()Jakub Kicinski2-0/+62
Read link speed from the BAR. This provides very basic information and works for both PFs and VFs. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05Merge tag 'linux-can-next-for-4.13-20170404' of ↵David S. Miller4-82/+1171
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-03-03 this is a pull request of 5 patches for net-next/master. There are two patches by Yegor Yefremov which convert the ti_hecc driver into a DT only driver, as there is no in-tree user of the old platform driver interface anymore. The next patch by Mario Kicherer adds network namespace support to the can subsystem. The last two patches by Akshay Bhat add support for the holt_hi311x SPI CAN driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05net: ibm: emac: remove unused sysrq handler for 'c' keyEric Biggers6-306/+1
Since commit d6580a9f1523 ("kexec: sysrq: simplify sysrq-c handler"), the sysrq handler for the 'c' key has been sysrq_crash_op. Debugging code in the ibm_emac driver also tries to register a handler for the 'c' key, but this has no effect because register_sysrq_key() doesn't replace existing handlers. Since evidently no one has cared enough to fix this in the last 8 years, and it's very rare for drivers to register sysrq handlers (for good reason), just remove the dead code. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bonding: fix active-backup transitionMahesh Bandewar1-8/+5
Earlier patch c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") made an attempt to keep slave state consistent with speed and duplex settings. Unfortunately link-state transition is used to change the active link especially when used in conjunction with mii-mon. The above mentioned patch broke that logic. Also when speed and duplex settings for a link are updated during a link-event, the link-status should not be changed to invoke correct transition logic. This patch fixes this issue by moving the link-state update outside of the bond_update_speed_duplex() fn and to the places where this fn is called and update link-state selectively. Fixes: c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05qed: Add a missing error codeDan Carpenter1-1/+3
We should be returning -ENOMEM if qed_mcp_cmd_add_elem() fails. The current code returns success. Fixes: 4ed1eea82a21 ("qed: Revise MFW command locking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05liquidio: clear the correct memoryDan Carpenter1-1/+1
There is a cut and paste bug here so we accidentally clear the first few bytes of "resp" a second time instead clearing "ctx". Fixes: 50c0add534d2 ("liquidio: refactor interrupt moderation code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05net: stmmac: rx queue to dma channel mapping fixJoao Pinto1-1/+1
In hardware configurations where multiple queues are active, the rx queue needs to be mapped into a dma channel, even if a single rx queue is used. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05phy/ethtool: Add missing SPEED_<foo> stringsJoe Perches1-0/+14
Add all the currently available SPEED_<foo> strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Cap the msix vector with the max completion rings.Michael Chan1-2/+3
The current code enables up to the maximum MSIX vectors in the PCIE config space without considering the max completion rings available. An MSIX vector is only useful when it has an associated completion ring, so it is better to cap it. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Use short TX BDs for the XDP TX ring.Michael Chan1-14/+2
No offload is performed on the XDP_TX ring so we can use the short TX BDs. This has the effect of doubling the size of the XDP TX ring so that it now matches the size of the rx ring by default. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add interrupt test to ethtool -t selftest.Michael Chan1-1/+31
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add PHY loopback to ethtool self-test.Michael Chan1-2/+60
It is necessary to disable autoneg before enabling PHY loopback, otherwise link won't come up. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool mac loopback self test.Michael Chan5-11/+199
The mac loopback self test operates in polling mode. To support that, we need to add functions to open and close the NIC half way. The half open mode allows the rings to operate without IRQ and NAPI. We use the XDP transmit function to send the loopback packet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add basic ethtool -t selftest support.Michael Chan4-3/+150
Add the basic infrastructure and only firmware tests initially. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add suspend/resume callbacks.Michael Chan1-0/+57
Add suspend/resume callbacks using the newer dev_pm_ops method. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool set_wol method.Michael Chan3-0/+60
And add functions to set and free magic packet filter. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add ethtool get_wol method.Michael Chan2-0/+17
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add pci shutdown method.Michael Chan1-0/+31
Add pci shutdown method to put device in the proper WoL and power state. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Add basic WoL infrastructure.Michael Chan2-0/+47
Add code to driver probe function to check if the device is WoL capable and if Magic packet WoL filter is currently set. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bnxt_en: Update firmware interface spec to 1.7.6.2.Michael Chan3-37/+297
Features added include WoL and selftest. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04Merge tag 'wireless-drivers-for-davem-2017-04-03' of ↵David S. Miller7-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.11 iwlwifi * an RCU fix * a fix for a potential out-of-bounds access crash * a fix for IBSS which has been broken since DQA was enabled rtlwifi * fix scheduling while atomic regression brcmfmac * fix use-after-free bug found by KASAN ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04can: hi311x: Add Holt HI-311x CAN driverAkshay Bhat3-0/+1083
This patch adds support for the Holt HI-311x CAN controller. The HI311x CAN controller is capable of transmitting and receiving standard data frames, extended data frames and remote frames. The HI311x interfaces with the host over SPI. Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do Signed-off-by: Akshay Bhat <nodeax@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04can: ti_hecc: Convert TI HECC driver to DT only driverYegor Yefremov1-82/+88
This patch converts TI HECC driver to DT only driver. This results in removing ti_hecc.h containing now obsolete platform data. Former transceiver_switch callback function will be now modelled via regulator API. Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-03qed: Manage with less memory regions for RoCERam Amrani4-37/+125
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: RoCE doesn't need to use SRCMintz, Yuval1-2/+1
As RoCE doesn't need to use the SRC, allocating ILT memory on behalf of RoCE is wasting available ILT lines. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Correct TM ILT lines in presence of VFsMintz, Yuval1-1/+1
As of today there's no protocol supported that requires support from the TM hardware block and enables SRIOV, but we should still correct the calculation to reflect the lines required for such future VFs instead of changing the PF's own lines. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Fix TM block ILT allocationMichal Kalderon1-7/+25
When configuring the HW timers block we should set the number of CIDs up until the last CID that require timers, instead of only those CIDs whose protocol needs timers support. Today, the protocols that require HW timers' support have their CIDs before any other protocol, but that would change in future [when we add iWARP support]. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03qed: Revise QM cofigurationAriel Elior15-303/+665
Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer17-4/+69
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net/faraday: Add missing include of of.hAndrew Lunn1-0/+1
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03vxlan: fix ND proxy when skb doesn't have transport header offsetVincent Bernat1-14/+15
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Some checkpatch.pl script & warning fixesSalil6-14/+11
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Avoid Hip06 chip TX packet line buglipeng7-70/+169
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Adjust the SBM module buffer thresholdKejian Yan1-4/+4
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by: Ping Zhang <zhangping5@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Simplify the exception sequence in hns_ppe_init()Kejian Yan1-9/+8
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by: JinchuanTian <tianjinchuan1@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: hns: Optimise the code in hns_mdio_wait_ready()Kejian Yan1-4/+6
This patch fixes the code to clear pclint warning/info. Reported-by: Ping Zhang <zhangping5@huawei.com> Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 12:04:14 +0000