summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-11-30brcm80211: fix error code in brcmf_pcie_exit_download_state()Dan Carpenter1-1/+3
The original code returns 1 on failure and 0 on success but the caller was expecting an error code on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30libertas: cleanup a variable nameDan Carpenter1-1/+1
"&card->priv->driver_lock" and "&priv->driver_lock" are the same and it's nicer to use the shorter one consistently. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30rt2x00: type bug in _rt2500usb_register_read()Dan Carpenter1-1/+4
This code causes a static checker bug. drivers/net/wireless/ralink/rt2x00/rt2500usb.c:232 _rt2500usb_register_read() warn: passing casted pointer 'value' to 'rt2500usb_register_read()' 32 vs 16. If the low 16 bits were initialized to zero then this code would only be a problem on big endian systems. But in this case this is case the low 16 bits are never initialized. This is called from a function which is created using a macro: RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); We end up copying uninitialized data to the user which is bogus and an information leak. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Fix double free on exception at module load.Hante Meuleman1-0/+2
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Unify methods to define and map firmware files.Hante Meuleman6-317/+178
All bus drivers (sdio, usb and pcie) require firmware files which needs to be downloaded to the device, The definitions and mapping of device id and revision to firmware and nvram file is done by each bus driver. This patch creates common functions and defines to simplify and unify the definition of these firmware and nvram files and mapping. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: assure net_ratelimit() is declared before useArend van Spriel1-0/+2
Under some kernel configuration we get build issue with implicit declaration of net_ratelimit() function. Fix this by explicitly including the file providing the prototype. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Add beamforming support.Hante Meuleman3-2/+42
Some devices support beamforming. This patch enables tx beamforming if supported and reports beamforming capabilities per channel if supported. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Cleanup roaming configuration.Hante Meuleman3-46/+22
Put all roaming configuration related code in one place and configure timeout based upon roaming setting. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Remove redundant parameter action from scan.Hante Meuleman3-12/+9
ESCAN is always performed using action start scan. No need to pass this parameter on to different functions. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: no retries on rxglom superframe errorsFranky Lin1-22/+8
Aborting the current read attempt on the superframe also removes the packet from the pipeline. Retries should not be attempted on the next packet since it would not be a superframe(either a superframe descriptor or other data packet) and should not be handled by brcmf_sdio_rxglom Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Change error print on wlan0 existence.Hante Meuleman1-3/+4
During initialization of the device, but also on some other moments the driver prints an error that the netdev already exists. This is a result of the way the driver is initializing the firmware and not really an error. The code is not treating it as an error either. This error print has resulted in many questions by users and is confusing and incorrect. This patch changes the error log into a debug info log. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Return actual error by fwil.Hante Meuleman1-1/+2
FWIL is always mapping back errors to EBADE. This is not very conventient when trying to understand problems by reading logs. Some callers print the error code, but that is quite useless when the exact error code is not returned. It also makes it impossible to differentiate based on error code. This patch changes the return of EBADE into the actual error code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30brcmfmac: Cleanup ssid storage.Hante Meuleman5-48/+24
SSIDs used for connect and p2p got stored, but never used. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30wcn36xx: use new response format for wcn3620 remove_bsskeyAndy Green1-1/+2
On wcn3620, firmware response to remove_bsskey uses the new, larger "v2" format Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30wcn36xx: use new response format for wcn3620 trigger_baAndy Green1-1/+2
On wcn3620, firmware response to trigger_ba uses the new, larger "v2" format Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30wcn36xx: handle new hal response formatAndy Green2-0/+25
wcn3620 has a new message structure for the reply to some hal commands. This patch adds the struct and helper routine that uses it if the chip is wcn3620, or falls back to the old helper routine. We don't know what to do with the candidate list he sends back, but we can at least accept and ignore it nicely instead of dying. Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30wcn36xx: swallow two wcn3620 IND messagesAndy Green1-0/+5
WCN3620 can asynchronously send two new kinds of indication message, since we can't handle them just accept them quietly. Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-30wcn36xx: introduce WCN36XX_HAL_AVOID_FREQ_RANGE_INDAndy Green1-0/+2
WCN3620 firmware introduces a new async indication, we need to add it as a known message type so we can accept it Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26libertas: check for NULL before usesudip1-1/+2
If kzalloc fails it will return NULL. Lets check for NULL first before using the pointer. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26rtlwifi: btcoexist: re-use %*ph specifier to hexdumpAndy Shevchenko5-80/+30
Instead of printing each byte from the given buffer the code is converted to use %*ph specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26rtlwifi: Delete unnecessary checks before the function call "kfree_skb"Markus Elfring2-5/+2
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: constify brcmf_bus_ops structuresJulia Lawall4-4/+4
The brcmf_bus_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26ath9k_htc: check for underflow in ath9k_htc_rx_msg()Dan Carpenter1-1/+1
We check for overflow here, but we don't check for underflow so it causes a static checker warning. Fixes: fb9987d0f748 ('ath9k_htc: Support for AR9271 chipset.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcm80211: Delete an unnecessary check before the function call ↵Markus Elfring1-2/+1
"release_firmware" The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add wowl wake indication report.Hante Meuleman2-2/+77
On wakeup of the system (resume) a wowl wakeup indication report can be sent to cfg80211. This patch adds support for this. The report specifies if the device was responsible for the wakeup and if so, will specify the exact reason. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use new methods for pcie Power Management.Hante Meuleman1-52/+37
Currently the legacy methods suspend and resume are used for pcie devices. This is not the preferable method and is also causing issues with some setups when doing hibernate. Changing this to use the new PM methods. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Use consistent naming for bsscfgidx.Hante Meuleman10-74/+78
The variable bsscfgidx is used in different places with different names, e.g. bsscfg, bssidx, bsscfg_idx. This patch cleans this up by using bsscfgidx everywhere. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add RSDB support.Hante Meuleman3-2/+8
Broadcom devices with a single 802.11 core can work on two band concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band. For devices that are fitted with two 802.11 cores and RF paths the driver should support a firmware feature called RSDB, which stands for Real Simultaneous Dual-Band. RSDB works almost autonomously in firmware except for AP config. When the device supports RSDB then the interface should not be brought down when configuring it, otherwise the link (if configured) on the other interface will be lost. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> [kvalo@codeaurora.org: changed the commit log based on discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Disable runtime pm for USB.Hante Meuleman1-1/+0
Currently runtime pm is enabled for USB, but it is not properly supported by driver. This patch disables the runtime PM support completely for USB, as it currently can result in problems on some systems. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Remove unncessary variable irq_requested.Hante Meuleman1-6/+0
The variable irq_requested is unneeded as the functionality it is providing, is also provided by the variable irq_allocated. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Remove unnecessary check from start_xmit.Hante Meuleman1-8/+0
The brcmf_netdev_start_xmit checks if the ndev is still valid by checking if it still exists in database. This check is not needed and therefor removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Simplify and fix usage of brcmf_ifname.Hante Meuleman3-18/+13
brcmf_ifname is a debug function to return a name related to an ifp, but is using a rather complex implementation. It was also used wrongly from bcdc as it did not use the bsscfgidx as it was supposed to, but bssidx. This patch fixes that bug and simplifies brcmf_ifname. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-26brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.Hante Meuleman3-0/+12
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mac80211_hwsim: move Kconfig entry for sorting alphabeticallyKalle Valo1-13/+13
mac80211_hwsim was not placed alphabetically correctly in menuconfig, fix that. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18ath: unify Kconfig with other vendorsKalle Valo3-11/+12
Change menuconfig to config to keep the Kconfig entries unified. Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18ti: unify Kconfig with other vendorsKalle Valo5-12/+15
Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure that it's enabled by default in new configs. Convert menuconfigs to regular configs to unify the wireless drivers menuconfig. Part of reorganising wireless drivers directory and Kconfig. Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is already under if WLAN_VENDOR_TI. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mediatek: unify Kconfig with other vendorsKalle Valo3-9/+12
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18rt2x00: move under ralink vendor directoryKalle Valo50-3/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18rsi: add vendor Kconfig entryKalle Valo3-3/+17
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18realtek: create separate Kconfig fileKalle Valo3-6/+20
Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS which we missed to do when earlier moving rtlwifi. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18prism54: move under intersil vendor directoryKalle Valo20-22/+21
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18orinoco: move under intersil vendor directoryKalle Valo35-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18p54: move under intersil vendor directoryKalle Valo21-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18hostap: move under intersil vendor directoryKalle Valo24-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18zd1211rw: move under zydas vendor directoryKalle Valo19-2/+4
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18zd1201: move under zydas vendor directoryKalle Valo6-21/+36
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwl8k: move under marvell vendor directoryKalle Valo5-11/+11
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo52-3/+2
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18libertas_tf: move under marvell vendor directoryKalle Valo12-21/+21
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-11-18libertas: move under marvell vendor directoryKalle Valo35-2/+19
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 08:25:05 +0000