summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-08-03[S390] qdio: Use kstrtoul_from_userPeter Huewe1-9/+3
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03[S390] sclp_async: Use kstrtoul_from_userPeter Huewe1-6/+3
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03[S390] dasd: check if raw track access is supportedStefan Haberland1-0/+9
To use raw track access some special storage server commands are needed. Older storage hardware may not support these commands. So check if raw track access is possible while setting the DASD online. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03[S390] dasd: use vmalloc for statistics input bufferStefan Weinhuber2-6/+7
The size of the buffer that is used to store DASD statistics input strings depends on the user input. If the input string is to large, the write operation could fail with -ENOMEM. To avoid this, use vmalloc instead of kmalloc. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03[S390] qdio: 2nd stage retry on SIGA-W busy conditionsJan Glauber2-3/+20
The SIGA-W may return with the busy bit set which means the device was blocked. The busy loop which retries the SIGA-W for 100us may not be long enough when running under a heavily loaded hypervisor. Extend the retry mechanism by adding a longer second stage which retries the SIGA-W for up to 10s. In difference to the first retry loop the second stage is using mdelay to stop the cpu between the retries and thereby avoid additional preassure in on the hypervisor. If the second stage retry is successfull a device reset is avoided. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-02Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-5/+6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: MAINTAINERS: Add keyword match for of_match_table to device tree section of: constify property name parameters for helper functions input: xilinx_ps2: Add missing of_address.h header of: address: use resource_size helper
2011-08-02Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-8/+3
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: remove function cannot exit
2011-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds15-345/+1351
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (34 commits) dm table: set flush capability based on underlying devices dm crypt: optionally support discard requests dm raid: add md raid1 support dm raid: support metadata devices dm raid: add write_mostly parameter dm raid: add region_size parameter dm raid: improve table parameters documentation dm ioctl: forbid multiple device specifiers dm ioctl: introduce __get_dev_cell dm ioctl: fill in device parameters in more ioctls dm flakey: add corrupt_bio_byte feature dm flakey: add drop_writes dm flakey: support feature args dm flakey: use dm_target_offset and support discards dm table: share target argument parsing functions dm snapshot: skip reading origin when overwriting complete chunk dm: ignore merge_bvec for snapshots when safe dm table: clean dm_get_device and move exports dm raid: tidy includes dm ioctl: prevent empty message ...
2011-08-02of: constify property name parameters for helper functionsJamie Iles1-3/+4
The helper functions for reading u32 integers, u32 arrays and strings should have the property name as a const pointer. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-02spi/pl022: remove function cannot exitLinus Walleij1-8/+3
The remove function in the PL022 driver cannot abort the remove function any way, so restructure the code so as not to make that assumption. Remove will now proceed no matter whether it can stop the transfer queue or not. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-02dm table: set flush capability based on underlying devicesMike Snitzer2-1/+43
DM has always advertised both REQ_FLUSH and REQ_FUA flush capabilities regardless of whether or not a given DM device's underlying devices also advertised a need for them. Block's flush-merge changes from 2.6.39 have proven to be more costly for DM devices. Performance regressions have been reported even when DM's underlying devices do not advertise that they have a write cache. Fix the performance regressions by configuring a DM device's flushing capabilities based on those of the underlying devices' capabilities. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm crypt: optionally support discard requestsMilan Broz1-4/+45
Add optional parameter field to dmcrypt table and support "allow_discards" option. Discard requests bypass crypt queue processing. Bio is simple remapped to underlying device. Note that discard will be never enabled by default because of security consequences. It is up to the administrator to enable it for encrypted devices. (Note that userspace cryptsetup does not understand new optional parameters yet. Support for this will come later. Until then, you should use 'dmsetup' to enable and disable this.) Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: add md raid1 supportJonathan Brassow1-10/+39
Support the MD RAID1 personality through dm-raid. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: support metadata devicesJonathan Brassow2-18/+406
Add the ability to parse and use metadata devices to dm-raid. Although not strictly required, without the metadata devices, many features of RAID are unavailable. They are used to store a superblock and bitmap. The role, or position in the array, of each device must be recorded in its superblock. This is to help with fault handling, array reshaping, and sanity checks. RAID 4/5/6 devices must be loaded in a specific order: in this way, the 'array_position' field helps validate the correctness of the mapping when it is loaded. It can be used during reshaping to identify which devices are added/removed. Fault handling is impossible without this field. For example, when a device fails it is recorded in the superblock. If this is a RAID1 device and the offending device is removed from the array, there must be a way during subsequent array assembly to determine that the failed device was the one removed. This is done by correlating the 'array_position' field and the bit-field variable 'failed_devices'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: add write_mostly parameterJonathan Brassow1-1/+25
Add the write_mostly parameter to RAID1 dm-raid tables. This allows the user to set the WriteMostly flag on a RAID1 device that should normally be avoided for read I/O. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: add region_size parameterJonathan Brassow1-3/+79
Allow the user to specify the region_size. Ensures that the supplied value meets md's constraints, viz. the number of regions does not exceed 2^21. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: forbid multiple device specifiersMikulas Patocka1-0/+6
Exactly one of name, uuid or device must be specified when referencing an existing device. This removes the ambiguity (risking the wrong device being updated) if two conflicting parameters were specified. Previously one parameter got used and any others were ignored silently. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: introduce __get_dev_cellMikulas Patocka1-17/+24
Move logic to find device based on major/minor number to a separate function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell). This makes the function __find_device_hash_cell more straightforward. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: fill in device parameters in more ioctlsMikulas Patocka1-27/+36
Move parameter filling from find_device to __find_device_hash_cell. This patch causes ioctls using __find_device_hash_cell (DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD) to return device parameters, bringing them into line with the other ioctls. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm flakey: add corrupt_bio_byte featureMike Snitzer1-15/+140
Add corrupt_bio_byte feature to simulate corruption by overwriting a byte at a specified position with a specified value during intervals when the device is "down". Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm flakey: add drop_writesMike Snitzer1-8/+55
Add 'drop_writes' option to drop writes silently while the device is 'down'. Reads are not touched. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm flakey: support feature argsMike Snitzer1-19/+64
Add the ability to specify arbitrary feature flags when creating a flakey target. This code uses the same target argument helpers that the multipath target does. Also remove the superfluous 'dm-flakey' prefixes from the error messages, as they already contain the prefix 'flakey'. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm flakey: use dm_target_offset and support discardsMike Snitzer1-1/+2
Use dm_target_offset() and support discards. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm table: share target argument parsing functionsMike Snitzer3-112/+104
Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm snapshot: skip reading origin when overwriting complete chunkMikulas Patocka2-3/+88
If we write a full chunk in the snapshot, skip reading the origin device because the whole chunk will be overwritten anyway. This patch changes the snapshot write logic when a full chunk is written. In this case: 1. allocate the exception 2. dispatch the bio (but don't report the bio completion to device mapper) 3. write the exception record 4. report bio completed Callbacks must be done through the kcopyd thread, because callbacks must not race with each other. So we create two new functions: dm_kcopyd_prepare_callback: allocate a job structure and prepare the callback. (This function must not be called from interrupt context.) dm_kcopyd_do_callback: submit callback. (This function may be called from interrupt context.) Performance test (on snapshots with 4k chunk size): without the patch: non-direct-io sequential write (dd): 17.7MB/s direct-io sequential write (dd): 20.9MB/s non-direct-io random write (mkfs.ext2): 0.44s with the patch: non-direct-io sequential write (dd): 26.5MB/s direct-io sequential write (dd): 33.2MB/s non-direct-io random write (mkfs.ext2): 0.27s Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm: ignore merge_bvec for snapshots when safeMikulas Patocka3-2/+64
Add a new flag DMF_MERGE_IS_OPTIONAL to struct mapped_device to indicate whether the device can accept bios larger than the size its merge function returns. When set, use this to send large bios to snapshots which can split them if necessary. Snapshot I/O may be significantly fragmented and this approach seems to improve peformance. Before the patch, dm_set_device_limits restricted bio size to page size if the underlying device had a merge function and the target didn't provide a merge function. After the patch, dm_set_device_limits restricts bio size to page size if the underlying device has a merge function, doesn't have DMF_MERGE_IS_OPTIONAL flag and the target doesn't provide a merge function. The snapshot target can't provide a merge function because when the merge function is called, it is impossible to determine where the bio will be remapped. Previously this led us to impose a 4k limit, which we can now remove if the snapshot store is located on a device without a merge function. Together with another patch for optimizing full chunk writes, it improves performance from 29MB/s to 40MB/s when writing to the filesystem on snapshot store. If the snapshot store is placed on a non-dm device with a merge function (such as md-raid), device mapper still limits all bios to page size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm table: clean dm_get_device and move exportsMike Snitzer1-20/+13
There is no need for __table_get_device to be factored out. Also move the exports to the end of their respective functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: tidy includesAlasdair G Kergon1-1/+2
A dm target only needs to use include/linux dm headers. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm ioctl: prevent empty messageAlasdair G Kergon1-0/+5
Detect invalid empty messages in core dm instead of requiring every target to check this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm raid: cleanup parameter handlingJonathan Brassow1-19/+23
Re-order the parameters so they are handled consistently in the same order where defined, parsed and output. Only include rebuild parameters in the STATUSTYPE_TABLE output if they were supplied in the original table line. Correct the parameter count when outputting rebuild: there are two words, not one. Use case-independent checks for keywords (as in other device-mapper targets). Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm snapshot: style cleanupsJonathan Brassow2-10/+8
Coding style cleanups. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2011-08-02dm snapshot: remove unused definitionsMikulas Patocka1-10/+0
Remove a couple of unused #defines. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm kcopyd: remove nr_pages field from job structureMikulas Patocka1-4/+2
The nr_pages field in struct kcopyd_job is only used temporarily in run_pages_job() to count the number of required pages. We can use a local variable instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm kcopyd: remove offset field from job structureMikulas Patocka1-5/+2
The offset field in struct kcopyd_job is always zero so remove it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm: use vzallocJoe Perches3-7/+3
Use vzalloc() instead of vmalloc()+memset(). Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm log: userspace use list_moveKirill A. Shutemov1-2/+1
Replace list_del() followed by list_add() with list_move(). Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm log: clean up bit little endian bitopsAkinobu Mita1-5/+4
Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). This also removes unnecessary casts. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm table: fix discard supportMike Snitzer2-9/+9
Remove 'discards_supported' from the dm_table structure. The same information can be easily discovered from the table's target(s) in dm_table_supports_discards(). Before this fix dm_table_supports_discards() would skip checking the individual targets' 'discards_supported' flag if any one target in the table didn't set num_discard_requests > 0. Now the per-target 'discards_supported' flag is effective at insuring the final DM device advertises discard support. But, to be clear, targets that don't support discards (!num_discard_requests) will not receive discard requests. Also DMWARN if a target sets 'discards_supported' override but forgets to set 'num_discard_requests'. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm: suppress endian warningsAlasdair G Kergon3-43/+54
Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm: fix idr leak on module removalAlasdair G Kergon1-2/+8
Destroy _minor_idr when unloading the core dm module. (Found by kmemleak.) Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm io: flush cpu cache with vmapped ioMikulas Patocka1-2/+27
For normal kernel pages, CPU cache is synchronized by the dma layer. However, this is not done for pages allocated with vmalloc. If we do I/O to/from vmallocated pages, we must synchronize CPU cache explicitly. Prior to doing I/O on vmallocated page we must call flush_kernel_vmap_range to flush dirty cache on the virtual address. After finished read we must call invalidate_kernel_vmap_range to invalidate cache on the virtual address, so that accesses to the virtual address return newly read data and not stale data from CPU cache. This patch fixes metadata corruption on dm-snapshots on PA-RISC and possibly other architectures with caches indexed by virtual address. Cc: stable <stable@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm mpath: fix potential NULL pointer in feature arg processingMike Snitzer1-0/+5
Avoid dereferencing a NULL pointer if the number of feature arguments supplied is fewer than indicated. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2011-08-02dm snapshot: flush disk cache when mergingMikulas Patocka1-1/+1
This patch makes dm-snapshot flush disk cache when writing metadata for merging snapshot. Without cache flushing the disk may reorder metadata write and other data writes and there is a possibility of data corruption in case of power fault. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02watchdog: Cleanup WATCHDOG_CORE help textJosh Boyer1-3/+0
The newly added WATCHDOG_CORE option is a bool, but the help text suggests it can be built as a module. Fix it up. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boardsMart Gerrits1-0/+8
At present the module does not unset the NO_REBOOT bit upon shutdown, this causes the BIOS to fail the POST once and reset. During the next boot it displays the following error message: ***** Warning: System BOOT Fail ***** Your system last boot fail or POST interrupted. Please enter setup to load default and reboot again. Press F1 to continue, DEL to enter SETUP With this patch the NO_REBOOT flag will be unset on shutdown and thus stop this failure from occurring. Tested on 'ASUS P5N32-E SLI with BIOS revision 1801' and 'ASUS P5N32-E SLI PLUS with BIOS revision 1502'. Signed-off-by: Mart Gerrits <mart1987@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02watchdog: shwdt: fix usage of mod_timerDavid Engraf1-1/+1
Fix the usage of mod_timer() and make the driver usable. mod_timer() must be called with an absolute timeout in jiffies. The old implementation used a relative timeout thus the hardware watchdog was never triggered. Signed-off-by: David Engraf <david.engraf@sysgo.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Wim Van sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org>
2011-08-01Merge branch 'for-linus' of ↵Linus Torvalds7-199/+307
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (23 commits) regulator: Improve WM831x DVS VSEL selection algorithm regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already set regulator: Set up GPIO for WM831x VSEL before enabling VSEL mode regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdc regulator: Fix WM831x DCDC DVS VSEL bootstrapping regulator: Fix WM831x regulator ID lookups for multiple WM831xs regulator: Fix argument format type errors in error prints regulator: Fix memory leak in set_machine_constraints() error paths regulator: Make core more chatty about some errors regulator: tps65910: Fix array access out of bounds bug regulator: tps65910: Add missing breaks in switch/case regulator: tps65910: Fix a memory leak in tps65910_probe error path regulator: TWL: Remove entry of RES_ID for 6030 macros ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxes regulator: Add basic per consumer debugfs regulator: Add rdev_crit() macro regulator: Refactor supply implementation to work as regular consumers regulator: Include the device name in the microamps_requested_ file regulator: Increase the limit on sysfs file names regulator: Properly register dummy regulator driver ...
2011-08-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree() VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree() switch posix_acl_chmod() to umode_t switch posix_acl_from_mode() to umode_t switch posix_acl_equiv_mode() to umode_t * switch posix_acl_create() to umode_t * block: initialise bd_super in bdget() vfs: avoid call to inode_lru_list_del() if possible vfs: avoid taking inode_hash_lock on pipes and sockets vfs: conditionally call inode_wb_list_del() VFS: Fix automount for negative autofs dentries Btrfs: load the key from the dir item in readdir into a fake dentry devtmpfs: missing initialialization in never-hit case hppfs: missing include
2011-08-01Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds15-326/+442
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits) Improve slave/cyclic DMA engine documentation dmaengine: pl08x: handle the rest of enums in pl08x_width DMA: PL08x: cleanup selection of burst size DMA: PL08x: avoid recalculating cctl at each prepare DMA: PL08x: cleanup selection of buswidth DMA: PL08x: constify plchan->cd and plat->slave_channels DMA: PL08x: separately store source/destination cctl DMA: PL08x: separately store source/destination slave address DMA: PL08x: clean up LLI debugging DMA: PL08x: select LLI bus only once per LLI setup DMA: PL08x: remove unused constants ARM: mxs-dma: reset after disable channel dma: intel_mid_dma: remove redundant pci_set_drvdata calls dma: mxs-dma: fix unterminated platform_device_id table dmaengine: pl330: make platform data optional dmaengine: imx-sdma: return proper error if kzalloc fails pch_dma: Fix CTL register access issue dmaengine: mxs-dma: skip request_irq for NO_IRQ dmaengine/coh901318: fix slave submission semantics dmaengine/ste_dma40: allow memory buswidth/burst to be configured ... Fix trivial whitespace conflict in drivers/dma/mv_xor.c
2011-08-01Merge branch 'pstore-efi' of ↵Linus Torvalds2-17/+246
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: Introduce PSTORE_EFI_ATTRIBUTES efivars: Use string functions in pstore_write efivars: introduce utf16_strncmp efivars: String functions efi: Add support for using efivars as a pstore backend pstore: Allow the user to explicitly choose a backend pstore: Make "part" unsigned pstore: Add extra context for writes and erases pstore: Extend API for more flexibility in new backends
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 07:34:42 +0000