summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-06-29Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds4-17/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Diverse irqchip driver fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix command queue pointer comparison bug irqchip/mips-gic: Use the correct local interrupt map registers irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus
2019-06-29Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds3-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Four fixes: - fix a kexec crash on arm64 - fix a reboot crash on some Android platforms - future-proof the code for upcoming ACPI 6.2 changes - fix a build warning on x86" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efibc: Replace variable set function in notifier call x86/efi: fix a -Wtype-limits compilation warning efi/bgrt: Drop BGRT status field reserved bits check efi/memreserve: deal with memreserve entries in unmapped memory
2019-06-29Merge tag 'pm-5.2-rc7' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Avoid skipping bus-level PCI power management during system resume for PCIe ports left in D0 during the preceding suspend transition on platforms where the power states of those ports can change out of the PCI layer's control" * tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI: PM: Avoid skipping bus-level PM on platforms without ACPI
2019-06-29Merge tag 'scsi-fixes' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One simple fix for a driver use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
2019-06-29Merge tag 'pinctrl-v5.2-3' of ↵Linus Torvalds3-27/+33
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Sorry to bomb in fixes this late. Maybe I can comfort you by saying it is only driver fixes, and mostly IRQ handling which is something GPIO and pin control drivers never get right. You think it works and then it doesn't. Summary: - Fix IRQ setup in the MCP23s08. - Fix pin setup on pins > 31 in the Ocelot driver. - Fix IRQs in the Mediatek driver" * tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mediatek: Update cur_mask in mask/mask ops pinctrl: mediatek: Ignore interrupts that are wake only during resume pinctrl: ocelot: fix pinmuxing for pins after 31 pinctrl: ocelot: fix gpio direction for pins after 31 pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order
2019-06-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds7-13/+18
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes and one core framework fix - Do a DT/firmware lookup in clk_core_get() even when the DT index is a nonsensical value - Fix some clk data typos in the Amlogic DT headers/code - Avoid returning junk in the TI clk driver when an invalid clk is looked for - Fix dividers for the emac clks on Stratix10 SoCs - Fix default HDA rates on Tegra210 to correct distorted audio" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix divider entry for the emac clocks clk: Do a DT parent lookup even when index < 0 clk: tegra210: Fix default rates for HDA clocks clk: ti: clkctrl: Fix returning uninitialized data clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-06-28Merge tag 'for-5.2/dm-fixes-2' of ↵Linus Torvalds4-10/+29
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix incorrect uses of kstrndup and DM logging macros in DM's early init code. - Fix DM log-writes target's handling of super block sectors so updates are made in order through use of completion. - Fix DM core's argument splitting code to avoid undefined behaviour reported as a side-effect of UBSAN analysis on ppc64le. - Fix DM verity target to limit the amount of error messages that can result from a corrupt block being found. * tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: use message limit for data block corruption message dm table: don't copy from a NULL pointer in realloc_argv() dm log writes: make sure super sector log updates are written in order dm init: remove trailing newline from calls to DMERR() and DMINFO() dm init: fix incorrect uses of kstrndup()
2019-06-28Merge branch 'for-linus' of ↵Linus Torvalds9-5/+32
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for one corner case in HID++ protocol with respect to handling very long reports, from Hans de Goede - power management fix in Intel-ISH driver, from Hyungwoo Yang - use-after-free fix in Intel-ISH driver, from Dan Carpenter - a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and Oleksandr Natalenko * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: fix wrong driver_data usage HID: multitouch: Add pointstick support for ALPS Touchpad HID: logitech-dj: Fix forwarding of very long HID++ reports HID: uclogic: Add support for Huion HS64 tablet HID: chicony: add another quirk for PixArt mouse HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
2019-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-39/+77
Pull networking fixes from David Miller: 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi. 2) Fix TX completion to be finite, from Sergej Benilov. 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin Long. 4) Double free of TX cleanup in Dirk van der Merwe. 5) Memory leak in packet_set_ring(), from Eric Dumazet. 6) Out of bounds read in qmi_wwan, from Bjørn Mork. 7) Fix iif used in mcast/bcast looped back packets, from Stephen Suryaputra. 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits) af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET sctp: change to hold sk after auth shkey is created successfully ipv6: fix neighbour resolution with raw socket ipv6: constify rt6_nexthop() net: dsa: microchip: Use gpiod_set_value_cansleep() net: aquantia: fix vlans not working over bridged network ipv4: reset rt_iif for recirculated mcast/bcast out pkts team: Always enable vlan tx offload net/smc: Fix error path in smc_init net/smc: hold conns_lock before calling smc_lgr_register_conn() bonding: Always enable vlan tx offload net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down" ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop qmi_wwan: Fix out-of-bounds read tipc: check msg->req data len in tipc_nl_compat_bearer_disable net: macb: do not copy the mac address if NULL net/packet: fix memory leak in packet_set_ring() net/tls: fix page double free on TX cleanup net/sched: cbs: Fix error path of cbs_module_init tipc: change to use register_pernet_device ...
2019-06-27pinctrl: mediatek: Update cur_mask in mask/mask opsNicolas Boichat1-14/+4
During suspend/resume, mtk_eint_mask may be called while wake_mask is active. For example, this happens if a wake-source with an active interrupt handler wakes the system: irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so that it can be handled later on in the resume flow. However, this may happen before mtk_eint_do_resume is called: in this case, wake_mask is loaded, and cur_mask is restored from an older copy, re-enabling the interrupt, and causing an interrupt storm (especially for level interrupts). Step by step, for a line that has both wake and interrupt enabled: 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt enabled at hardware level) 2. System suspends, resumes due to that line (at this stage EINT_EN == wake_mask) 3. irq_pm_check_wakeup is called, and disables the interrupt => EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so it reenables EINT_EN[irq] = 1 => interrupt storm as the driver is not yet ready to handle the interrupt. This patch fixes the issue in step 3, by recording all mask/unmask changes in cur_mask. This also avoids the need to read the current mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask function. The interrupt will be re-enabled properly later on, sometimes after mtk_eint_do_resume, when the driver is ready to handle it. Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-26PCI: PM: Avoid skipping bus-level PM on platforms without ACPIRafael J. Wysocki1-4/+4
There are platforms that do not call pm_set_suspend_via_firmware(), so pm_suspend_via_firmware() returns 'false' on them, but the power states of PCI devices (PCIe ports in particular) are changed as a result of powering down core platform components during system-wide suspend. Thus the pm_suspend_via_firmware() checks in pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to- idle") are not sufficient to determine that devices left in D0 during suspend will remain in D0 during resume and so the bus-level power management can be skipped for them. For this reason, introduce a new global suspend flag, PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only and replace the pm_suspend_via_firmware() checks mentioned above with checks against this flag. Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-26ipv6: constify rt6_nexthop()Nicolas Dichtel1-1/+1
There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: dsa: microchip: Use gpiod_set_value_cansleep()Marek Vasut1-3/+3
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: aquantia: fix vlans not working over bridged networkDmitry Bogdanov4-8/+23
In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26team: Always enable vlan tx offloadYueHaibing1-1/+1
We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26bonding: Always enable vlan tx offloadYueHaibing1-1/+1
We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26pinctrl: mediatek: Ignore interrupts that are wake only during resumeNicolas Boichat1-1/+15
Before suspending, mtk-eint would set the interrupt mask to the one in wake_mask. However, some of these interrupts may not have a corresponding interrupt handler, or the interrupt may be disabled. On resume, the eint irq handler would trigger nevertheless, and irq/pm.c:irq_pm_check_wakeup would be called, which would try to call irq_disable. However, if the interrupt is not enabled (irqd_irq_disabled(&desc->irq_data) is true), the call does nothing, and the interrupt is left enabled in the eint driver. Especially for level-sensitive interrupts, this will lead to an interrupt storm on resume. If we detect that an interrupt is only in wake_mask, but not in cur_mask, we can just mask it out immediately (as mtk_eint_resume would do anyway at a later stage in the resume sequence, when restoring cur_mask). Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-26HID: intel-ish-hid: fix wrong driver_data usageHyungwoo Yang2-3/+16
Currently, in suspend() and resume(), ishtp client drivers are using driver_data to get "struct ishtp_cl_device" object which is set by bus driver. It's wrong since the driver_data should not be owned bus. driver_data should be owned by the corresponding ishtp client driver. Due to this, some ishtp client driver like cros_ec_ishtp which uses its driver_data to transfer its data to its child doesn't work correctly. So this patch removes setting driver_data in bus drier and instead of using driver_data to get "struct ishtp_cl_device", since "struct device" is embedded in "struct ishtp_cl_device", we introduce a helper function that returns "struct ishtp_cl_device" from "struct device". Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: multitouch: Add pointstick support for ALPS TouchpadKai-Heng Feng2-0/+5
There's a new ALPS touchpad/pointstick combo device that requires MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse. The device can be found on HP ZBook 17 G5. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: logitech-dj: Fix forwarding of very long HID++ reportsHans de Goede1-1/+3
The HID++ spec also defines very long HID++ reports, with a reportid of 0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending messages to display on their buildin LCD. Userspace (libmx5000) supports this, in order for this to work when talking to the HID devices instantiated for the keyboard by hid-logitech-dj, we need to properly forward these reports to the device. This commit fixes logi_dj_ll_raw_request not forwarding these reports. Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: uclogic: Add support for Huion HS64 tabletKyle Godbey3-0/+5
Add support for Huion HS64 drawing tablet to hid-uclogic Signed-off-by: Kyle Godbey <me@kyle.ee> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: chicony: add another quirk for PixArt mouseOleksandr Natalenko2-0/+2
I've spotted another Chicony PixArt mouse in the wild, which requires HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute. USB ID of this device is 0x04f2:0x0939. We've introduced quirks like this for other models before, so lets add this mouse too. Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linux Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com> Acked-by: Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: intel-ish-hid: Fix a use after free in load_fw_from_host()Dan Carpenter1-1/+1
We have to print the filename first before we can kfree it. Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-25clk: socfpga: stratix10: fix divider entry for the emac clocksDinh Nguyen1-2/+2
The fixed dividers for the emac clocks should be 2 not 4. Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25dm verity: use message limit for data block corruption messageMilan Broz1-2/+2
DM verity should also use DMERR_LIMIT to limit repeat data block corruption messages. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm table: don't copy from a NULL pointer in realloc_argv()Jerome Marchand1-1/+1
For the first call to realloc_argv() in dm_split_args(), old_argv is NULL and size is zero. Then memcpy is called, with the NULL old_argv as the source argument and a zero size argument. AFAIK, this is undefined behavior and generates the following warning when compiled with UBSAN on ppc64le: In file included from ./arch/powerpc/include/asm/paca.h:19, from ./arch/powerpc/include/asm/current.h:16, from ./include/linux/sched.h:12, from ./include/linux/kthread.h:6, from drivers/md/dm-core.h:12, from drivers/md/dm-table.c:8: In function 'memcpy', inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3, inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9: ./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/dm-table.c: In function 'dm_split_args': ./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy' Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm log writes: make sure super sector log updates are written in orderzhangyi (F)1-2/+21
Currently, although we submit super bios in order (and super.nr_entries is incremented by each logged entry), submit_bio() is async so each super sector may not be written to log device in order and then the final nr_entries may be smaller than it should be. This problem can be reproduced by the xfstests generic/455 with ext4: QA output created by 455 -Silence is golden +mark 'end' does not exist Fix this by serializing submission of super sectors to make sure each is written to the log disk in order. Fixes: 0e9cebe724597 ("dm: add log writes target") Cc: stable@vger.kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm init: remove trailing newline from calls to DMERR() and DMINFO()Stephen Boyd1-2/+2
These printing macros already add a trailing newline, so having another one here just makes for blank lines when these prints are enabled. Remove these needless newlines. Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm init: fix incorrect uses of kstrndup()Gen Zhang1-3/+3
Fix 2 kstrndup() calls with incorrect argument order. Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org # v5.1 Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25pinctrl: ocelot: fix pinmuxing for pins after 31Alexandre Belloni1-7/+9
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pinctrl: ocelot: fix gpio direction for pins after 31Alexandre Belloni1-1/+1
The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call orderPhil Reid1-4/+4
Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25Merge tag 'mfd-fixes-5.2-1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd bugfix from Lee Jones. Fix stmfx type confusion between regmap_read() (which takes an "u32") and the bitmap operations (which take an "unsigned long" array). * tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: stmfx: Fix an endian bug in stmfx_irq_handler() mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
2019-06-24qmi_wwan: Fix out-of-bounds readBjørn Mork1-1/+1
The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com Cc: Kristian Evensen <kristian.evensen@gmail.com> Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net: macb: do not copy the mac address if NULLAntoine Tenart1-1/+1
This patch fixes the MAC address setup in the probe. The MAC address retrieved using of_get_mac_address was checked for not containing an error, but it may also be NULL which wasn't tested. Fix it by replacing IS_ERR with IS_ERR_OR_NULL. Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24mfd: stmfx: Fix an endian bug in stmfx_irq_handler()Dan Carpenter1-1/+3
It's not okay to cast a "u32 *" to "unsigned long *" when you are doing a for_each_set_bit() loop because that will break on big endian systems. Fixes: 386145601b82 ("mfd: stmfx: Uninitialized variable in stmfx_irq_handler()") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-24Merge tag 'mtd/fixes-for-5.2-rc7' of ↵Linus Torvalds2-12/+110
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: - Set the raw NAND number of targets to the right value - Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes * tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes mtd: rawnand: initialize ntargets with maxchips
2019-06-24Merge tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linuxLinus Torvalds2-4/+5
Pull auxdisplay cleanup from Miguel Ojeda: "A cleanup for two drivers in auxdisplay: convert them to use vm_map_pages_zero() (Souptick Joarder)" * tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux: auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero() auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()
2019-06-23mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashesTudor Ambarus1-11/+108
SPI memory devices from different manufacturers have widely different configurations for Status, Control and Configuration registers. JEDEC 216C defines a new map for these common register bits and their functions, and describes how the individual bits may be accessed for a specific device. For the JEDEC 216B compliant flashes, we can partially deduce Status and Configuration registers functions by inspecting the 16th DWORD of BFPT. Older flashes that don't declare the SFDP tables (SPANSION FL512SAIFG1 311QQ063 A ©11 SPANSION) let the software decide how to interact with these registers. The commit dcb4b22eeaf4 ("spi-nor: s25fl512s supports region locking") uncovered a probe error for s25fl512s, when the Quad Enable bit CR[1] was set to one in the bootloader. When this bit is one, only the Write Status (01h) command with two data byts may be used, the 01h command with one data byte is not recognized and hence the error when trying to clear the block protection bits. Fix the above by using the Write Status (01h) command with two data bytes when the Quad Enable bit is one. Backward compatibility should be fine. The newly introduced spi_nor_spansion_clear_sr_bp() is tightly coupled with the spansion_quad_enable() function. Both assume that the Write Register with 16 bits, together with the Read Configuration Register (35h) instructions are supported. Fixes: dcb4b22eeaf44f91 ("spi-nor: s25fl512s supports region locking") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Jonas Bonn <jonas@norrbonn.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-22sis900: fix TX completionSergej Benilov1-8/+8
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22net: stmmac: set IC bit when transmitting frames with HW timestampRoland Hii1-8/+14
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit hardware timestamp. The polling will most likely timeout if the tx coalesce is enabled due to the Interrupt-on-Completion (IC) bit is not set in tx descriptor for those frames. This patch will ignore the tx coalesce parameter and set the IC bit when transmitting PTP frames which need to report out the frame transmit hardware timestamp to user space. Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22net: stmmac: fixed new system time seconds value calculationRoland Hii1-1/+1
When ADDSUB bit is set, the system time seconds field is calculated as the complement of the seconds part of the update value. For example, if 3.000000001 seconds need to be subtracted from the system time, this field is calculated as 2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD Previously, the 0x100000000 is mistakenly written as 100000000. This is further simplified from sec = (0x100000000ULL - sec); to sec = -sec; Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22Merge tag 'iommu-fix-v5.2-rc5' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Revert a commit from the previous pile of fixes which causes new lockdep splats. It is better to revert it for now and work on a better and more well tested fix" * tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
2019-06-22Revert "iommu/vt-d: Fix lock inversion between iommu->lock and ↵Peter Xu1-4/+3
device_domain_lock" This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8. With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt: ====================================================== WARNING: possible circular locking dependency detected 5.2.0-rc5 #78 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0 but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){....}: _raw_spin_lock_irqsave+0x3c/0x50 dmar_insert_one_dev_info+0xbb/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 -> #0 (&(&iommu->lock)->rlock){+.+.}: lock_acquire+0x9e/0x170 _raw_spin_lock+0x25/0x30 domain_context_mapping_one+0xa5/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 kernel_init_freeable+0x218/0x2c1 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(device_domain_lock); lock(&(&iommu->lock)->rlock); lock(device_domain_lock); lock(&(&iommu->lock)->rlock); *** DEADLOCK *** 2 locks held by swapper/0/1: #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422 #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0 stack backtrace: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78 Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018 Call Trace: dump_stack+0x85/0xc0 print_circular_bug.cold.57+0x15c/0x195 __lock_acquire+0x152a/0x1710 lock_acquire+0x9e/0x170 ? domain_context_mapping_one+0xa5/0x4e0 _raw_spin_lock+0x25/0x30 ? domain_context_mapping_one+0xa5/0x4e0 domain_context_mapping_one+0xa5/0x4e0 ? domain_context_mapping_one+0x4e0/0x4e0 pci_for_each_dma_alias+0x30/0x140 dmar_insert_one_dev_info+0x3b2/0x510 domain_add_dev_info+0x50/0x90 dev_prepare_static_identity_mapping+0x30/0x68 intel_iommu_init+0xddd/0x1422 ? printk+0x58/0x6f ? lockdep_hardirqs_on+0xf0/0x180 ? do_early_param+0x8e/0x8e ? e820__memblock_setup+0x63/0x63 pci_iommu_init+0x16/0x3f do_one_initcall+0x5d/0x2b4 ? do_early_param+0x8e/0x8e ? rcu_read_lock_sched_held+0x55/0x60 ? do_early_param+0x8e/0x8e kernel_init_freeable+0x218/0x2c1 ? rest_init+0x230/0x230 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 domain_context_mapping_one() is taking device_domain_lock first then iommu lock, while dmar_insert_one_dev_info() is doing the reverse. That should be introduced by commit: 7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock", 2019-05-27) So far I still cannot figure out how the previous deadlock was triggered (I cannot find iommu lock taken before calling of iommu_flush_dev_iotlb()), however I'm pretty sure that that change should be incomplete at least because it does not fix all the places so we're still taking the locks in different orders, while reverting that commit is very clean to me so far that we should always take device_domain_lock first then the iommu lock. We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current breakage. CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-06-22Merge tag 'pci-v5.2-fixes-1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2 because we don't yet know how to support P2PDMA in that case (Logan Gunthorpe)" * tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
2019-06-22Merge tag 'scsi-fixes' of ↵Linus Torvalds4-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three driver fixes (and one version number update): a suspend hang in ufs, a qla hard lock on module removal and a qedi panic during discovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information
2019-06-22ppp: mppe: Add softdep to arc4Takashi Iwai1-0/+1
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22be2net: fix link failure after ethtool offline testPetr Oros1-6/+22
Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22efibc: Replace variable set function in notifier callTian Baofeng1-5/+7
Replace the variable set function from "efivar_entry_set" to "efivar_entry_set_safe" in efibc panic notifier. In safe function parameter "block" will set to false and will call "efivar_entry_set_nonblocking"to set efi variables. efivar_entry_set_nonblocking is guaranteed to not block and is suitable for calling from crash/panic handlers. In UEFI android platform, when warm reset happens, with this change, efibc will not block the reboot process. Otherwise, set variable will call queue work and send to other offlined cpus then cause another panic, finally will cause reboot failure. Signed-off-by: Tian Baofeng <baofeng.tian@intel.com> Signed-off-by: Luo XinanX <xinanx.luo@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-14/+18
Pull networking fixes from David Miller: 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume Nault. 2) Don't access the DDM interface unless the transceiver implements it in bnx2x, from Mauro S. M. Rodrigues. 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from JingYi Hou. 4) Sign extension overflow in lio_core, from Colin Ian King. 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski. 6) Fix epollout hang in hvsock, from Sunil Muthuswamy. 7) Fix regression in default fib6_type, from David Ahern. 8) Handle memory limits in tcp_fragment more appropriately, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) tcp: refine memory limit test in tcp_fragment() inet: clear num_timeout reqsk_alloc() net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL tun: wake up waitqueues after IFF_UP is set net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer ...