summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan8-8/+8
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: stmmac: replace if (netif_msg_type) by their netif_xxx counterpartLABBE Corentin1-28/+21
As sugested by Joe Perches, we could replace all if (netif_msg_type(priv)) dev_xxx(priv->devices, ...) by the simpler macro netif_xxx(priv, hw, priv->dev, ...) Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: stmmac: replace hardcoded function name by __func__LABBE Corentin1-4/+3
Some printing have the function name hardcoded. It is better to use __func__ instead. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: stmmac: replace all pr_xxx by their netdev_xxx counterpartLABBE Corentin2-95/+123
The stmmac driver use lots of pr_xxx functions to print information. This is bad since we cannot know which device logs the information. (moreover if two stmmac device are present) Furthermore, it seems that it assumes wrongly that all logs will always be subsequent by using a dev_xxx then some indented pr_xxx like this: kernel: sun7i-dwmac 1c50000.ethernet: no reset control found kernel: Ring mode enabled kernel: No HW DMA feature register supported kernel: Normal descriptors kernel: TX Checksum insertion supported So this patch replace all pr_xxx by their netdev_xxx counterpart. Excepts for some printing where netdev "cause" unpretty output like: sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): no reset control found In those case, I keep dev_xxx. In the same time I remove some "stmmac:" print since this will be a duplicate with that dev_xxx displays. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net/mlx5e: remove napi_hash_del() callsEric Dumazet1-4/+0
Calling napi_hash_del() after netif_napi_del() is pointless. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net/mlx4_en: remove napi_hash_del() callEric Dumazet1-4/+0
There is no need calling napi_hash_del()+synchronize_rcu() before calling netif_napi_del() netif_napi_del() does this already. Using napi_hash_del() in a driver is useful only when dealing with a batch of NAPI structures, so that a single synchronize_rcu() can be used. mlx4_en_deactivate_cq() is deactivating a single NAPI. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: minimal: Add I2C support for Mellanox ASICsVadim Pasternak3-0/+110
Add I2C access support for Mellanox ASICs: - Virtual Protocol Interconnect switches SwitchX, SwitchX2, providing InfiniBand, Ethernet and Fibre Channel connectivity; - Infiniband switches SwitchIB, SwitchIB2: - Ethernet switch Spectrum. Example of probing activation: echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Invoke driver's init/fini methods only if definedVadim Pasternak1-5/+9
We are going to add a minimal driver on top of the mlxsw core infrastructure, which will be mainly used for hardware monitoring in Baseboard management controller (BMC) installations. Unlike the switch drivers (e.g., spectrum, switchx2), this driver does not initialize the ASIC and therefore doesn't need to implement the init() and fini() methods in its 'mlxsw_driver' struct. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Introduce support for I2C busVadim Pasternak4-0/+654
Add I2C bus implementation for Mellanox Technologies Switch ASICs. This includes command interface implementation using input / out mailboxes, whose location is retrieved from the firmware during probe time. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Add bus capability flagVadim Pasternak3-0/+10
The mlxsw core infrastructure currently assumes that communication with the ASIC is always possible using Ethernet management datagrams (EMADs), but this is only possible when the PCI bus is used. The bus capability flag is added to indicate EMAD support and make core initialize EMAD communication only when it's set. Otherwise, register access is done using command interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: netcp: replace IS_ERR_OR_NULL by IS_ERRJulia Lawall1-3/+3
knav_queue_open always returns an ERR_PTR value, never NULL. This can be confirmed by unfolding the function calls and conforms to the function's documentation. Thus, replace IS_ERR_OR_NULL by IS_ERR in error checks. The change is made using the following semantic patch: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; statement S; @@ x = knav_queue_open(...); if ( - IS_ERR_OR_NULL + IS_ERR (x)) S // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Add ethtool -n|-N rx-flow-hash support.Michael Chan1-3/+164
To display and modify the RSS hash. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Add UDP RSS support for 57X1X chips.Michael Chan2-8/+16
The newer chips have proper support for 4-tuple UDP RSS. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Enhance autoneg support.Michael Chan2-0/+24
On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Update firmware interface spec to 1.5.4.Michael Chan2-5/+94
Use the new FORCE_LINK_DWN bit to shutdown link during close. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16cadence: Add LSO support.Rafal Ozieblo2-12/+140
New Cadence GEM hardware support Large Segment Offload (LSO): TCP segmentation offload (TSO) as well as UDP fragmentation offload (UFO). Support for those features was added to the driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16netronome: don't access real_num_rx_queues directlyArnd Bergmann1-8/+6
The netdev->real_num_rx_queues setting is only available if CONFIG_SYSFS is enabled, so we now get a build failure when that is turned off: netronome/nfp/nfp_net_common.c: In function 'nfp_net_ring_swap_enable': netronome/nfp/nfp_net_common.c:2489:18: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'? As far as I can tell, the check here is only used as an optimization that we can skip in order to fix the compilation. If sysfs is disabled, the following netif_set_real_num_rx_queues() has no effect. Fixes: 164d1e9e5d52 ("nfp: add support for ethtool .set_channels") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16sfc: remove napi_hash_del() callEric Dumazet1-3/+2
Calling napi_hash_del() after netif_napi_del() is pointless. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: spectrum_router: Adjust placement of FIB abort warningIdo Schimmel1-3/+3
The recent merge commit bb598c1b8c9b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") would cause the FIB abort warning to fire whenever we flush the FIB tables - either during module removal or actual abort. Move it back to its rightful location in the FIB abort function. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: dsa: mv88e6xxx: Respect SPEED_UNFORCED, don't set force bitAndrew Lunn1-1/+1
The SPEED_UNFORCED indicates the MAC & PHY should perform auto-negotiation to determine a speed which works. If this is called for, don't set the force bit. If it is set, the MAC actually does 10Gbps, why the internal PHYs don't support. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16amd-xgbe: Fix maximum GPIO value checkLendacky, Thomas1-2/+2
The GPIO support in the hardware allows for up to 16 GPIO pins, enumerated from 0 to 15. The driver uses the wrong value (16) to validate the GPIO pin range in the routines to set and clear the GPIO output pins. Update the code to use the correct value (15). Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16amd-xgbe: Fix possible uninitialized variableLendacky, Thomas1-1/+1
The debugfs support in the driver uses a common routine to write the debugfs values. In this routine, if the input file position is non-zero then the write routine will not return an error and an output parameter will not have been set. Because an error isn't returned an uninitialized value will be written into a register. Fix the common write routine to return an error if the input file position is non-zero, which will propagate back to the caller. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: marvell: pxa168_eth: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: mvpp2: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: mvneta: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethoc: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: stmmac: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Utilize the generic phy_ethtool_nway_reset() helper function to implement an autonegotiation restart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnx2x: switch to napi_complete_done()Eric Dumazet1-7/+8
Switch from napi_complete() to napi_complete_done() for better GRO support (gro_flush_timeout) and core NAPI features. Do not rearm interrupts if we are busy polling, to reduce bus and interrupts overhead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net/mlx4_en: use napi_complete_done() return valueEric Dumazet1-2/+2
Do not rearm interrupts if we are busy polling. mlx4 uses separate CQ for TX and RX, so number of TX interrupts does not change, unfortunately. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: enable multiple tx queuesTobias Regnery1-2/+6
Enable multiple tx queues by default based on the number of online cpus. The hardware supports up to four tx queues. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: enable msi-x interrupts by defaultTobias Regnery1-5/+1
Remove the module parameter to enable msi-x support and enable msi-x interrupts unconditionally by default. This is a preparatory step to enable multi queue support by default, because this is only working with msi-x interrupts. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare tx path for multi queue supportTobias Regnery1-13/+45
This patch prepares the tx path to send data on multiple tx queues. It introduces per queue register adresses and uses them in the alx_tx_queue structs. There are new helper functions for the queue mapping in the tx path. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare resource allocation for multi queue supportTobias Regnery1-52/+97
Allocate, initialise and free alx_tx_queue structs based on the number of alx_napi structures. Also increase the size of the descriptor memory based on the number of tx queues in use. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare interrupt functions for multiple queuesTobias Regnery1-27/+105
Extend the interrupt bringup code and the interrupt handler for msi-x interrupts in order to handle multiple queues. We must change the poll function because with multiple queues it is possible that an alx_napi structure has only a tx or only a rx queue pointer. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: switch to per queue data structuresTobias Regnery2-95/+93
Remove the tx and rx queue structures from the alx_priv structure and switch everything over to the queue pointers in the alx_napi structure. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: add ability to allocate and free alx_napi structuresTobias Regnery1-21/+78
Add new functions to allocate and free the alx_napi structures and use them in __alx_open and __alx_stop. We only allocate one of these structures for now, as the rest of the driver is not yet ready for multiple queues. We switch over the setup of the interrupt mask and the call to netif_napi_add to the new function because we must adjust these later on a per queue basis. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: extend data structures for multi queue supportTobias Regnery1-0/+31
Extend the driver data structures to be able to handle multiple queues. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: refactor descriptor allocationTobias Regnery1-44/+53
Split the allocation of descriptor memory and the buffer allocation into a tx and rx function. This is in preparation for multiple queues where we need to iterate over the new functions. While at it drop the unneeded casting on the rx side. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add trace pointsMadalin Bucur4-0/+158
Add trace points on the hot processing path. Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add sysfs exportsMadalin Bucur4-1/+174
Export Frame Queue and Buffer Pool IDs through sysfs. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool statisticsMadalin Bucur3-2/+284
Add a series of counters to be exported through ethtool: - add detailed counters for reception errors; - add detailed counters for QMan enqueue reject events; - count the number of fragmented skbs received from the stack; - count all frames received on the Tx confirmation path; - add congestion group statistics; - count the number of interrupts for each CPU. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool functionalityMadalin Bucur4-1/+224
Add support for basic ethtool operations. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add support for DPAA EthernetMadalin Bucur6-0/+2850
This introduces the Freescale Data Path Acceleration Architecture (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan, BMan, PAMU and FMan drivers to deliver Ethernet connectivity on the Freescale DPAA QorIQ platforms. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15devres: add devm_alloc_percpu()Madalin Bucur1-0/+66
Introduce managed counterparts for alloc_percpu() and free_percpu(). Add devm_alloc_percpu() and devm_free_percpu() into the managed interfaces list. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: fix for new check patch errorsRaghu Vatsavayi15-180/+155
New checkpatch script shows some errors with pre-existing driver. This patch provides fix for those errors. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: copyrights changes and alignmentRaghu Vatsavayi30-480/+352
Updated copyrights comments and also changed some other comments alignments. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: code cleanupRaghu Vatsavayi13-70/+23
Cleaned up unnecessary comments and added some minor macros. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: device statesRaghu Vatsavayi6-31/+64
Cleaned up resource leaks during destroy resources by introducing more device states. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: VF related operationsRaghu Vatsavayi5-0/+251
Adds support for VF related operations like mac address vlan and link changes. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15liquidio CN23XX: mailbox interrupt processingRaghu Vatsavayi4-7/+184
Adds support for mailbox interrupt processing of various commands. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 11:43:48 +0000