summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-03-13net: bcmgenet: add support for the GENETv5 hardwareDoug Berger4-50/+118
This commit adds support for the GENETv5 implementation. The GENETv5 reports a major version of 6 instead of 5 so compensate for this when verifying the configuration of the driver. Also the EPHY revision is now contained in the MDIO registers of the PHY so the EPHY revision of 0 in GENET_VER_FMT is expected for GENETv5. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: return EOPNOTSUPP for unknown ioctl commandsDoug Berger1-16/+3
This commit changes the ioctl handling behavior to return the EOPNOTSUPP error code instead of the EINVAL error code when an unknown ioctl command value is detected. It also removes some redundant parsing of the ioctl command value and allows the SIOCSHWTSTAMP value to be handled. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: correct return value of __bcmgenet_tx_reclaimDoug Berger1-2/+2
The reclaim function should return the number of buffer descriptors reclaimed, not just the number corresponding to skb packets. Also, remove the unnecessary computation when updating the consumer index. While this is not a functional problem it could degrade performance of napi in a fragmented transmit stream. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: clear status to reduce spurious interruptsDoug Berger1-1/+20
Since the DMA interrupt status is latched and the DMA servicing can be polled, it is a good idea to clear the latched status of a DMA interrupt before performing the service that would be invoked by the interrupt. This prevents old status from causing spurious interrupts when the interrupt is unmasked at a later time. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: remove handling of wol interrupts from isr0Doug Berger2-23/+2
The bcmgenet_wol_isr() handler performs the necessary processing for waking from a GENET event. There is no necessary functionality behind servicing the UMAC_IRQ_MPD_R event in the handling of isr0. Therefore the code that unmasks and masks this interrupt and that gets invoked in response to it is removed by this commit. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: manage dma interrupts in napi codeDoug Berger1-17/+22
This commit moves DMA interrupt enabling out of init_umac() and adds the masking of these interrupts to the napi enable and disable code. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: remove meaningless linesDoug Berger1-10/+3
An assortment of non-functional lines are removed to reduce confusion and some typos in comments are corrected. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: bcmgenet: simplify circular pointer arithmeticDoug Berger1-14/+5
A 2's complement subtraction will always do a borrow, so masking off the sign bits is the same as conditionally adding (mask+1). Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: phy: bcm7xxx: add support for 28nm EPHYDoug Berger1-2/+213
This commit adds support for the internal fast ethernet 10/100 PHY found in the BCM7260, BCM7268, and BCM7271 devices. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: phy: bcm-phylib: replace obsolete EEE macro referencesDoug Berger1-3/+3
The macros MDIO_AN_EEE_ADV_100TX and MDIO_AN_EEE_ADV_1000T are now considered obsolete and are replaced in the kernel with the generic macros MDIO_EEE_100TX and MDIO_EEE_1000T respectively. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13qed*: Utilize Firmware 8.15.3.0Mintz, Yuval33-1955/+4005
This patch advances the qed* drivers into using the newer firmware - This solves several firmware bugs, mostly related [but not limited to] various init/deinit issues in various offloaded protocols. It also introduces a major 4-Cached SGE change in firmware, which can be seen in the storage drivers' changes. In addition, this firmware is required for supporting the new QL41xxx series of adapters; While this patch doesn't add the actual support, the firmware contains the necessary initialization & firmware logic to operate such adapters [actual support would be added later on]. Changes from Previous versions: ------------------------------- - V2 - fix kbuild-test robot warnings Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: usb: rtl8150: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-15/+20
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: usb: r8152: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-9/+12
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: usb: catc: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-13/+18
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: usb: asix88179_178a: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-6/+8
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: tun: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-13/+11
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: net_netdev: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+13
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: add socket to pdp contextAndreas Schultz1-47/+47
Having the socket present in context simplifies the sending logic. It also fixes the invalid assumption that we have to use the same sending socket for all client IP's on a specific gtp interface. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: consolidate pdp context destruction into helperAndreas Schultz1-10/+14
Consolidate duplicate code into helper. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: unify genl_find_pdp and prepare for per socket lookupAndreas Schultz1-71/+50
This unifies duplicate code into a helper. It also prepares the groundwork to add a lookup version that uses the socket to find attached pdp contexts. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: consolidate gtp socket rx pathAndreas Schultz1-36/+44
Add network device to gtp context in preparation for splitting the TEID from the network device. Use this to rework the socker rx path. Move the common RX part of v0 and v1 into a helper. Also move the final rx part into that helper as well. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: merge gtp_get_net and gtp_genl_find_devAndreas Schultz1-74/+66
Both function are always used together with the final goal to get the gtp_dev. This simplifies the code by merging them together. The netdevice lookup is changed to use the regular dev_get_by_index. The gtp netdevice list is now only used to find the PDP contexts for imcomming packets. It can be completely eliminated Once the TEID hash is moved into the GTP socket. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: make GTP sockets in gtp_newlink optionalAndreas Schultz1-67/+75
Having both GTPv0-U and GTPv1-U is not always desirable. Fallback from GTPv1-U to GTPv0-U was depreciated from 3GPP Rel-8 onwards. Post Rel-8 implementation are discuraged from listening on the v0 port (see 3GPP TS 29.281, Sect. 1). A future change will completely decouple the sockets from the network device. Till then, at least one of the sockets needs to be specified (either v0 or v1), the other is optional. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13gtp: switch from struct socket to struct sock for the GTP socketsAndreas Schultz1-19/+23
After enabling the UDP encapsulation, only the sk member is used. Holding the socket would prevent user space from closing the socket, but holding a reference to the sk member does not have the same effect. This change will make it simpler to later detach the sockets from the netdevice. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: stmmac: added default rx queue size in stmmac_dma_interruptJoao Pinto1-0/+3
This patch adds the rx queue default size when dma interrupts are treated, since dma op mode can be also set there. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: stmmac: set default number of rx and tx queues in stmmac_pciJoao Pinto1-0/+4
This patch configures default number of RX and TX queues when using the pci glue driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12r8169: replace init_timer with setup_timerZhu Yanjun1-3/+1
Replace init_timer with setup_timer to simplify the source code. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: add port priority override opVivien Didelot4-13/+35
Add a new operation to disable the DA, SA and VTU priority override. Setting such limit is not likely to be used soon, so provide a port_disable_pri_override operation directly. This can be changed later for port_set_pri_override when we'll need it. Also remove the now obsolete mv88e6xxx_6320_family helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: add port ATU learn limit opVivien Didelot4-6/+41
Add a new operation to disable the limiting of learnt MAC addresses. Setting such limit is not likely to be used soon, so provide a port_disable_learn_limit operation directly. This can be changed later for port_set_learn_limit when we'll need it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: fix port egress flooding modeVivien Didelot4-92/+80
The Marvell switch ports can be configured to allow or prevent egress of frames with an unknown unicast or multicast destination address. Some switch chips such as 88E6095 and 88E6185 have two disjoint bits in Port Control Register (0x04) bit 2 "Forward Unknown" (for unicast) and Port Control 2 Register (0x08) bit 6 "Default Forward" (for multicast). Other chips such as 88E6085, 88E6123, 88E6352, and 88E6390 have a 2-bit value in Port Control Register (0x04) bits 3:2 "EgressFloods". The current code does not fully implement the disjoint bits variant and assigns incorrect ones to some chip models. Fix that with two implementation references (6185 and 6352 that I currently have) of a port_set_egress_floods operation (as named in datasheets). Old chips such as 88E6060 don't have egress flooding mode, so don't error out if the operation is not provided. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rework port mode setupVivien Didelot2-47/+60
A switch port mode is defined by the association of its egress mode, its frame mode and if supported or required, the ether type value. Pack all this in a mv88e6xxx_set_port_mode function and provide helpers for the Normal Network mode, the DSA mode, and the Ether Type DSA mode, as well as an helper to setup a port's mode depending on its nature. Define PORT_ETH_TYPE_DEFAULT for the 0x9100 reset value of port E Type. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rename the port vector memberVivien Didelot3-9/+9
Not all Marvell switch chips support port trunking, which is embedded in the port vector data for ATU operations. Rename the portv_trunkid member of the mv88e6xxx_atu_entry structure to portvec to be more concise and consistent with the different chips. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rename new FID helperVivien Didelot1-2/+2
Rename the _mv88e6xxx_fid_new helper to mv88e6xxx_atu_new to get rid of the old underscore prefix naming convention and be consistent with the rest of the chip-wide ATU API. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rework ATU RemoveVivien Didelot4-122/+67
Add a fresh documented implementation of the ATU Move operation, and use it to replace the current ATU Remove operation. Note that not all Marvell switch chip support the ATU Move operation. For those supporting it, the number of bits used to mask the destination port may vary. 6352 and such use 4-bit, while 6390 use 5-bit. Thus add a new atu_move_port_mask member in the info structure to describe the presence and variant of ATU Move operation. Note that the ATU Move operation is not documented in the 6185 datasheet but the chip does support the operation. All remaining _mv88e6xxx_atu_* functions are now unused as well as the MV88E6XXX_FLAG_G1_ATU_FID flag, thus remove them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rework ATU FlushVivien Didelot3-17/+43
Add a fresh documented implementation of the ATU Flush/Move operation. Use it to replace the current ATU Flush operation. _mv88e6xxx_atu_flush_move is still used by the Move operation so keep it until the Move operation is refactored in a next commit. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rework ATU GetNextVivien Didelot3-124/+84
Add and use a fresh documented implementation of the ATU GetNext. Since it is not necessary to write the MAC address to iterate from, only do it once directly in the ATU GetNext operation, if the provided ATU entry structure is not valid. This makes the user code simpler. Also, there is no need to loop when getting a single ATU entry. So remove the mv88e6xxx_atu_get helper and add a simpler snippet in mv88e6xxx_port_db_load_purge to lookup a given MAC address. The _mv88e6xxx_atu_mac_{read,write} are not used anymore thus remove them. _mv88e6xxx_atu_data_{read,write} are still used so keep them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: rework ATU Load/PurgeVivien Didelot3-21/+111
All Marvell switch chips have an ATU accessed using the same Global (1) register layout. Only the handling of the FID differs as more bits were necessary to support more and more databases. Add and use a fresh documented implementation of the ATU Load/Purge. The static mv88e6xxx_g1_atu_{fid_write,op_wait,op,data_write,mac_write} functions won't need to be exposed in the end so for the moment keep their counterparts _mv88e6xxx_atu_{wait,cmd,data_write,mac_write} as is, since they are still used by other ATU operations. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: enable ATU Learn2AllVivien Didelot3-9/+24
The ATU Learn2All feature allows newly learnt addresses to be spanned on ports marked as "Message Port", currently all DSA ports. This commit enables this feature which is necessary and quite convenient for multi-chip switch fabrics. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: setup message portsVivien Didelot4-4/+29
All interconnectable Marvell switch chips have an ATU Learn2All feature which allows newly learnt addresses to be spanned on ports marked as "Message Port". This commit configures the DSA ports as Message Port. Note that this has no effect until the Learn2All feature is enabled. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: add ATU setup helperVivien Didelot1-4/+9
Move the configuration of the default ageing time in a new mv88e6xxx_atu_setup function. That function will be extended later to contain all ATU related configuration bits. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: move ATU ageing time setterVivien Didelot4-29/+49
Move the ATU ageing time setter code in a new global1_atu.c file, which will be extended in future patches to contains all consequent Global (1) ATU support code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: dsa: mv88e6xxx: add port mask helperVivien Didelot2-1/+6
Add a mv88e6xxx_port_mask() helper to get the bitmask of ports in a switch chip, that will be used in several features. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add support for TC flower offload statisticsArkadi Sharshevsky4-0/+82
Add support for TC flower offload statistics including number of packets, bytes and last use timestamp. Currently the statistics are gathered on a per-rule basis. Signed-off-by: Arkadi Sharshvesky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add support for counters on TCAM entriesArkadi Sharshevsky2-0/+42
Add support for packets and byte statistics on TCAM entries. The counters are allocated from the generic flow counters pool. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add support for Policing and Counting action blockArkadi Sharshevsky2-0/+53
Add support for Policing and Counting action block. This action block will be used to bind counter to TCAM entries. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add periodic ACL rule activity updateArkadi Sharshevsky1-1/+73
Introduce periodic task for dumping the activity status for the ACL rule TCAM entries. This is done in order to emulate last use statistics. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.comi> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add support for direct rule accessArkadi Sharshevsky1-0/+6
Currently the ACL rules can be accessed only by hashing. In order to dump the activity the rules are also placed in a list. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum_acl_tcam: Add support for retrieving TCAM entry activityArkadi Sharshevsky2-0/+44
Add support for retrieving TCAM entry activity. In order to support ACL rule activity corresponding TCAM entry should be queried. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: spectrum: Add support for generic flow counter allocationArkadi Sharshevsky5-3/+86
Add support for allocating generic flow counter. Generic flow counter can count packets or packets and bytes and can be assigned to different hardware processes. First use will be for counting packets and bytes of ACL rules, and will be introduced in the following patches. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12mlxsw: reg: Add Monitoring General Purpose Counter Set registerArkadi Sharshevsky1-0/+65
The MGPC register retrieves generic flow counter value. It will be used to query ACL counters. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 17:35:17 +0000