Age | Commit message (Collapse) | Author | Files | Lines |
|
Fixing the IO stats update (Active IOs and IO completion) to prevent
"Number of Active IOs" from becoming negative in the fnistats output.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Getting rid of else case to make the flow look bit simpler.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
switch.i
This is to avoid the log from being filled with vlan discovery messages
when there is no vlan configured on the switch.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Not a full cleanup for the IRQ code, for that we'd need to know if the
max number of the various CQ types is going to stay 1 forever.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Buffer is a pointer to the static char array event_buffer and therefore
can never be null, so the check is redundant. Remove it.
Detected by CoverityScan, CID#1077556 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Even if bus is not hot-pluggable, devices can be unbound from the driver
via sysfs, so we should not be using __exit annotations on remove()
methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
1. Add reboot notifier and register it in stex_probe for all supported
device.
2. For all supported device in restart flow, we get a callback from
notifier and set S6flag for stex_shutdown & stex_hba_stop to send
restart command to FW.
Signed-off-by: Charles.Chiou <charles.chiou@tw.promise.com>
Signed-off-by: Paul.Lyu <paul.lyu@tw.promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pegasus series is a RAID support product using Thunderbolt technology.
The newest product, Pegasus 3(P3) supports Thunderbolt 3 technology with
a different chip.
1. Change driver version.
2. Add P3 VID, DID and define it's device address.
3. P3 use msi interrupt, so stex_request_irq P3 type enable msi.
4. For hibernation, use msi_lock in stex_ss_handshake to prevent msi
register write again when handshaking.
5. P3 doesn't need read() as flush.
6. In stex_ss_intr & stex_abort, P3 only clear interrupt register when
getting vendor defined interrupt.
Signed-off-by: Charles.Chiou <charles.chiou@tw.promise.com>
Signed-off-by: Paul.Lyu <paul.lyu@tw.promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter. This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Asus fixes for the airplane LED and a long awaited fujitsu cleanup.
asus-wmi:
- Remove quirk_no_rfkill
- Detect quirk_no_rfkill from the DSDT
fujitsu-laptop:
- remove redundant MODULE_ALIAS entries
- autodetect LCD interface on all models
- simplify acpi_bus_register_driver() error handling
- remove redundant forward declarations
- replace numeric values with constants
- rename FUNC_RFKILL to FUNC_FLAGS
- make platform-related variables match naming convention
- replace "hotkey" with "laptop" in symbol names
- clearly denote backlight-related symbols"
* tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus-wmi: Remove quirk_no_rfkill
platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT
platform/x86: fujitsu-laptop: remove redundant MODULE_ALIAS entries
platform/x86: fujitsu-laptop: autodetect LCD interface on all models
platform/x86: fujitsu-laptop: simplify acpi_bus_register_driver() error handling
platform/x86: fujitsu-laptop: remove redundant forward declarations
platform/x86: fujitsu-laptop: replace numeric values with constants
platform/x86: fujitsu-laptop: rename FUNC_RFKILL to FUNC_FLAGS
platform/x86: fujitsu-laptop: make platform-related variables match naming convention
platform/x86: fujitsu-laptop: replace "hotkey" with "laptop" in symbol names
platform/x86: fujitsu-laptop: clearly denote backlight-related symbols
|
|
With the detection introduced in the previous patches, we don't need
these static DMI-based quirks anymore.
This reverts the following commits:
56a37a72002b "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA"
a961a285b479 "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF"
6b7ff2af5286 "asus-wmi: Add quirk_no_rfkill for the Asus Z550MA"
02db9ff7af18 "asus-wmi: Add quirk_no_rfkill for the Asus U303LB"
2d735244b798 "asus-wmi: Add quirk_no_rfkill for the Asus N552VW"
a977e59c0c67 "asus-wmi: Create quirk for airplane_mode LED"
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[dvhart: minor commit message corrections]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- a workaround for a GIC erratum
- a missing stub function for CONFIG_IRQDOMAIN=n
- fixes for a couple of type inconsistencies
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Fix incorrect type of register size
irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065
irqdomain: Add empty irq_domain_check_msi_remap
irqchip/crossbar: Fix incorrect type of local variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random updates from Ted Ts'o:
"Change get_random_{int,log} to use the CRNG used by /dev/urandom and
getrandom(2). It's faster and arguably more secure than cut-down MD5
that we had been using.
Also do some code cleanup"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block
random: convert get_random_int/long into get_random_u32/u64
random: use chacha20 for get_random_int/long
random: fix comment for unused random_min_urandom_seed
random: remove variable limit
random: remove stale urandom_init_wait
random: remove stale maybe_reseed_primary_crng
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes frpm Greg KH:
"Here are two bugfixes for tty stuff for 4.11-rc2.
One of them resolves the pretty bad bug in the n_hdlc code that
Alexander Popov found and fixed and has been reported everywhere. The
other just fixes a samsung serial driver issue when DMA fails on some
systems.
Both have been in linux-next with no reported issues"
* tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: samsung: Continue to work if DMA request fails
tty: n_hdlc: get rid of racy n_hdlc.tbuf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small build warning fixes for some staging drivers that
Arnd has found on his valiant quest to get the kernel to build
properly with no warnings.
Both of these have been in linux-next this week and resolve the
reported issues"
* tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: octeon: remove unused variable
staging/vc04_services: add CONFIG_OF dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a number of different USB fixes for 4.11-rc2.
Seems like there were a lot of unresolved issues that people have been
finding for this subsystem, and a bunch of good security auditing
happening as well from Johan Hovold. There's the usual batch of gadget
driver fixes and xhci issues resolved as well.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: host: xhci-dbg: HCIVERSION should be a binary number
usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct
usb: xhci-mtk: check hcc_params after adding primary hcd
USB: serial: digi_acceleport: fix OOB-event processing
MAINTAINERS: usb251xb: remove reference inexistent file
doc: dt-bindings: usb251xb: mark reg as required
usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time
usb: usb251xb: remove max_{power,current}_{sp,bp} properties
usb-storage: Add ignore-residue quirk for Initio INIC-3619
USB: iowarrior: fix NULL-deref in write
USB: iowarrior: fix NULL-deref at probe
usb: phy: isp1301: Add OF device ID table
usb: ohci-at91: Do not drop unhandled USB suspend control requests
USB: serial: safe_serial: fix information leak in completion handler
USB: serial: io_ti: fix information leak in completion handler
USB: serial: omninet: drop open callback
USB: serial: omninet: fix reference leaks at open
USB: serial: io_ti: fix NULL-deref in interrupt callback
usb: dwc3: gadget: make to increment req->remaining in all cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
"Two smaller pin control fixes for the v4.11 series:
- Add a get_direction() function to the qcom driver
- Fix two pin names in the uniphier driver"
* tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: uniphier: change pin names of aio/xirq for LD11
pinctrl: qcom: add get_direction function
|
|
Pull ceph fixes from Ilya Dryomov:
- a fix for the recently discovered misdirected requests bug present in
jewel and later on the server side and all stable kernels
- a fixup for -rc1 CRUSH changes
- two usability enhancements: osd_request_timeout option and
supported_features bus attribute.
* tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client:
libceph: osd_request_timeout option
rbd: supported_features bus attribute
libceph: don't set weight to IN when OSD is destroyed
libceph: fix crush_decode() for older maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here are some driver bugfixes from I2C.
Unusual this time are the two reverts. One because I accidently picked
a patch from the list which I should have pulled from my co-maintainer
instead ("missing of_node_put"). And one which I wrongly assumed to be
an easy fix but it turned out already that it needs more iterations
("copy device properties")"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: copy device properties when using i2c_register_board_info()"
Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"
i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set
i2c: designware: add reset interface
i2c: meson: fix wrong variable usage in meson_i2c_put_data
i2c: copy device properties when using i2c_register_board_info()
i2c: m65xx: drop superfluous quirk structure
i2c: brcmstb: Fix START and STOP conditions
i2c: add missing of_node_put in i2c_mux_del_adapters
i2c: riic: fix restart condition
i2c: add missing of_node_put in i2c_mux_del_adapters
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, amd and mxsfb fixes.
These are the drm fixes I've collected for rc2. Mostly i915 GVT only
fixes, along with a single EDID fix, some mxsfb fixes and a few minor
amd fixes"
* tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux: (38 commits)
drm: mxsfb: Implement drm_panel handling
drm: mxsfb_crtc: Fix the framebuffer misplacement
drm: mxsfb: Fix crash when provided invalid DT bindings
drm: mxsfb: fix pixel clock polarity
drm: mxsfb: use bus_format to determine LCD bus width
drm/amdgpu: bump driver version for some new features
drm/amdgpu: validate paramaters in the gem ioctl
drm/amd/amdgpu: fix console deadlock if late init failed
drm/i915/gvt: change some gvt_err to gvt_dbg_cmd
drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space
drm/i915/gvt: handle workload lifecycle properly
drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
drm/i915/gvt: fix an error for F_RO flag
drm/i915/gvt: use pfn_valid for better checking
drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection
drm/i915/gvt: fix an error for one register
drm/i915/gvt: add more registers into handlers list
drm/i915/gvt: have more registers with F_CMD_ACCESS flags set
drm/i915/gvt: add some new MMIOs to cmd_access white list
drm/i915/gvt: fix pcode mailbox write emulation of BDW
...
|
|
Merge 5-level page table prep from Kirill Shutemov:
"Here's relatively low-risk part of 5-level paging patchset. Merging it
now will make x86 5-level paging enabling in v4.12 easier.
The first patch is actually x86-specific: detect 5-level paging
support. It boils down to single define.
The rest of patchset converts Linux MMU abstraction from 4- to 5-level
paging.
Enabling of new abstraction in most cases requires adding single line
of code in arch-specific code. The rest is taken care by asm-generic/.
Changes to mm/ code are mostly mechanical: add support for new page
table level -- p4d_t -- where we deal with pud_t now.
v2:
- fix build on microblaze (Michal);
- comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow();
- acks from Michal"
* emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>:
mm: introduce __p4d_alloc()
mm: convert generic code to 5-level paging
asm-generic: introduce <asm-generic/pgtable-nop4d.h>
arch, mm: convert all architectures to use 5level-fixup.h
asm-generic: introduce __ARCH_USE_5LEVEL_HACK
asm-generic: introduce 5level-fixup.h
x86/cpufeature: Add 5-level paging detection
|
|
Merge fixes from Andrew Morton:
"26 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
userfaultfd: remove wrong comment from userfaultfd_ctx_get()
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
sh: cayman: IDE support fix
kasan: fix races in quarantine_remove_cache()
kasan: resched in quarantine_remove_cache()
mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
thp: fix another corner case of munlock() vs. THPs
rmap: fix NULL-pointer dereference on THP munlocking
mm/memblock.c: fix memblock_next_valid_pfn()
userfaultfd: selftest: vm: allow to build in vm/ directory
userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
userfaultfd: non-cooperative: fix fork fctx->new memleak
mm/cgroup: avoid panic when init with low memory
drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
mm/vmstats: add thp_split_pud event for clarity
include/linux/fs.h: fix unsigned enum warning with gcc-4.2
userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
userfaultfd: non-cooperative: robustness check
userfaultfd: non-cooperative: rollback userfaultfd_exit
x86, mm: unify exit paths in gup_pte_range()
...
|
|
Commit 5657933dbb6e ("treewide: Move dma_ops from struct dev_archdata
into struct device") introduced a crash for macio devices, an example
backtrace being:
kernel BUG at ./include/linux/dma-mapping.h:465!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP [c031ddb0] dmam_alloc_coherent+0x74/0x140
LR [c031de70] dmam_alloc_coherent+0x134/0x140
Call Trace:
dmam_alloc_coherent+0x134/0x140 (unreliable)
pata_macio_port_start+0x3c/0x8c
ata_host_start.part.5+0xfc/0x208
ata_host_activate+0x128/0x154
pata_macio_common_init+0x2f0/0x538
pata_macio_attach+0xd8/0x180
macio_device_probe+0x5c/0xec
driver_probe_device+0x21c/0x314
__driver_attach+0xcc/0xd0
bus_for_each_dev+0x68/0xb4
bus_add_driver+0x1dc/0x244
driver_register+0x88/0x130
pata_macio_init+0x5c/0x88
do_one_initcall+0x40/0x170
kernel_init_freeable+0x134/0x1d0
kernel_init+0x18/0x110
ret_from_kernel_thread+0x5c/0x64
This was caused by the device having NULL dma_ops, triggering the
BUG_ON(). Previously the device inherited its dma_ops via the assignment
to dev->ofdev.dev.archdata. However after commit 5657933dbb6e the
dma_ops are moved into dev->ofdev.dev, and so they need to be explicitly
copied.
Fixes: 5657933dbb6e ("treewide: Move dma_ops from struct dev_archdata into struct device")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rewrite change log, add backtrace]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently when the 'power-supply' regulator is passed via device tree
it does not actually work since drm_panel_prepare()/drm_panel_enable()
are never called.
Quoting Thierry Reding: "It should really call drm_panel_prepare() and
drm_panel_enable() while switching on the display pipeline and
drm_panel_disable(), followed by drm_panel_unprepare() while switching
off the display pipeline."
So do as suggested, so that the 'power-supply' regulator can be functional.
Reported-by: Breno Lima <breno.lima@nxp.com>
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Currently the framebuffer content is displayed with incorrect offsets
in both the vertical and horizontal directions.
The fbdev version of the driver does not show this problem. Breno Lima
dumped the eLCDIF controller registers on both the drm and fbdev drivers
and noticed that the VDCTRL3 register is configured incorrectly in the
drm driver.
The fbdev driver calculates the vertical and horizontal wait counts
of the VDCTRL3 register by doing: back porch + sync length.
Looking at the horizontal and vertical timing diagram from
include/drm/drm_modes.h this value corresponds to:
crtc_[hv]total - crtc_[hv]sync_start
So fix the VDCTRL3 register setting accordingly so that the eLCDIF
controller can properly show the framebuffer content in the correct
position.
Reported-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The mxsfb driver will crash if the mxsfb DT node has a subnode,
but the content of the subnode is not of-graph binding with an
endpoint linking to panel. The crash was triggered by providing
old-style panel bindings to the mxsfb driver instead of the new
of-graph ones.
The problem happens in mxsfb_create_output(), which is invoked
from mxsfb_load(). The mxsfb_create_output() iterates over all
mxsfb DT subnode endpoints and tries to bind a panel on each
endpoint. If there is any problem binding the panel, that is,
mxsfb->panel == NULL, this function will return an error code,
otherwise success 0 is returned.
If the subnodes do not specify of-graph binding with an endpoint,
the iteration over endpoints in mxsfb_create_output() will have
zero cycles and the function will immediatelly return 0, but the
mxsfb->panel will remain NULL. This is propagated back into the
mxsfb_load(), which does not detect any problem and expects that
the mxsfb->panel is valid, thus calls mxsfb_panel_attach(). But
since mxsfb->panel == NULL, mxsfb_panel_attach() is called with
first argument NULL and this crashes the kernel.
This patch fixes the problem by explicitly checking for valid
mxsfb->panel at the end of the iteration in mxsfb_create_output().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The DRM subsystem specifies the pixel clock polarity from a
controllers perspective: DRM_BUS_FLAG_PIXDATA_NEGEDGE means
the controller drives the data on pixel clocks falling edge.
That is the controllers DOTCLK_POL=0 (Default is data launched
at negative edge).
Also change the data enable logic to be high active by default
and only change if explicitly requested via bus_flags. With
that defaults are:
- Data enable: high active
- Pixel clock polarity: controller drives data on negative edge
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The LCD bus width does not need to align with the pixel format. The
LCDIF controller automatically converts between pixel formats and
bus width by padding or dropping LSBs.
The DRM subsystem has the notion of bus_format which allows to
determine what bus_formats are supported by the display. Choose the
first available or fallback to 24 bit if none are available.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
into drm-fixes
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: bump driver version for some new features
drm/amdgpu: validate paramaters in the gem ioctl
drm/amd/amdgpu: fix console deadlock if late init failed
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
flushing out gvt-g fixes
* tag 'drm-intel-fixes-2017-03-09' of git://anongit.freedesktop.org/git/drm-intel: (29 commits)
drm/i915/gvt: change some gvt_err to gvt_dbg_cmd
drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space
drm/i915/gvt: handle workload lifecycle properly
drm/i915/gvt: fix an error for F_RO flag
drm/i915/gvt: use pfn_valid for better checking
drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection
drm/i915/gvt: fix an error for one register
drm/i915/gvt: add more registers into handlers list
drm/i915/gvt: have more registers with F_CMD_ACCESS flags set
drm/i915/gvt: add some new MMIOs to cmd_access white list
drm/i915/gvt: fix pcode mailbox write emulation of BDW
drm/i915/gvt: add resolution definition for vGPU type
drm/i915/gvt: Add more edid definition support
drm/i915/gvt: adjust to fixed vGPU types
drm/i915/gvt: remove unnecessary error msg from gtt write
drm/i915/gvt: refine pcode write emulation
drm/i915/gvt: clear the vGPU reset logic
drm/i915/gvt: decrease priority of output msg for untracked mmio
drm/i915/gvt: set default value to 0 for unhandled mmio regs
drm/i915/gvt: add cmd_access to GEN7_HALF_SLICE_CHICKEN1
...
|
|
Link: http://lkml.kernel.org/r/20170226060230.11555-1-standby24x7@gmail.com
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix typos and add the following to the scripts/spelling.txt:
overide||override
While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.
Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.
Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix typos and add the following to the scripts/spelling.txt:
disble||disable
disbled||disabled
I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched. The macro is not referenced at all, but this commit is
touching only comment blocks just in case.
Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix several issues in the intel_pstate driver and one issue in
the schedutil cpufreq governor, clean up that governor a bit and hook
up existing code for disabling cpufreq to a new kernel command line
option.
Specifics:
- Three fixes for intel_pstate problems related to the passive mode
(in which it acts as a regular cpufreq scaling driver), two for the
handling of global P-state limits and one for the handling of the
cpu_frequency tracepoint in that mode (Rafael Wysocki).
- Three fixes for the handling of P-state limits in intel_pstate in
the active mode (Rafael Wysocki).
- Introduction of a new cpufreq.off=1 kernel command line argument
that will disable cpufreq entirely if passed to the kernel and is
simply hooked up to the existing code used by Xen (Len Brown).
- Fix for the schedutil cpufreq governor to prevent it from using
stale raw frequency values in configurations with mutiple CPUs
sharing one policy object and a cleanup for it reducing its
overhead slightly (Viresh Kumar)"
* tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
cpufreq: intel_pstate: Fix global settings in active mode
cpufreq: Add the "cpufreq.off=1" cmdline option
cpufreq: schedutil: Pass sg_policy to get_next_freq()
cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Do not use performance_limits in passive mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:
- fix NULL pointer dereference in Exynos driver
- fix NULL pointer dereference in ASPM with pre-1.1 PCIe devices
- blacklist QLogic ISP2722 to prevent panics while reading VPD"
* tag 'pci-v4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove
PCI: Prevent VPD access for QLogic ISP2722
PCI: exynos: Initialize elbi_base even when using PHY framework
|
|
Pull block fixes from Jens Axboe:
"Sending this a bit sooner than I otherwise would have, as a fix in the
merge window had some unfortunate issues and side effects for some
folks.
This contains:
- Fixes from Jan for the bdi registration/unregistration. These have
been tested by the various parties reporting issues, and should be
solid at this point.
- Also from Jan, fix for axonram gendisk registration.
- A stable fix for zram from Johannes.
- A small series from Ming, fixing up some long standing issues with
blk-mq hardware queue kobject initialization and registration.
- A fix for sed opal from Jon, fixing a nonsensical range check and
some set-but-not-used variables.
- A fix from Neil for a long standing deadlock issue for stacking
device drivers. With this in place, dm/md don't have to work around
the issue anymore, and can be properly fixed up"
* 'for-linus' of git://git.kernel.dk/linux-block:
axonram: Fix gendisk handling
blk: improve order of bio handling in generic_make_request()
Revert "scsi, block: fix duplicate bdi name registration crashes"
block: Make del_gendisk() safer for disks without queues
bdi: Fix use-after-free in wb_congested_put()
block: Allow bdi re-registration
block/sed: Fix opal user range check and unused variables
zram: set physical queue limits to avoid array out of bounds accesses
blk-mq: free hctx->cpumask in release handler of hctx's kobject
blk-mq: make lifetime consistent between hctx and its kobject
blk-mq: make lifetime consitent between q/ctx and its kobject
blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Media regression fixes:
- serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due
to an IRQ code called too early
- other IR regression fixes at lirc and at the raw IR decoding
- a deadlock fix at the RC nuvoton driver
- fix another issue with DMA on stack at dw2102 driver
There's an extra patch there that change a driver interface for the
SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The
patch itself is trivial, and was acked by David Arlie"
* tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure
[media] dw2102: don't do DMA on stack
[media] rc: protocol is not set on register for raw IR devices
[media] rc: raw decoder for keymap protocol is not loaded on register
[media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes
[media] lirc: fix dead lock between open and wakeup_filter
[media] serial_ir: ensure we're ready to receive interrupts
|
|
We added new gem ioctl flags and the new fences ioctl, but forgot
to bump the version.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reject it if there are any invalid flags or domains.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix and cleanup from Juergen Gross:
"This contains one fix for MSIX handling under Xen and a trivial
cleanup patch"
* tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Remove duplicate inclusion of linux/init.h
xen: do not re-use pirq number cached in pci device msi msg data
|
|
Convert all non-architecture-specific code to 5-level paging.
It's mostly mechanical adding handling one more page table level in
places where we deal with pud_t.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of
PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI
xhci controllers which can result in excessive timeouts, to the point where
the system reports a deadlock.
The same problem is seen with hot pluggable xhci controllers using the
xhci-plat driver, such as the driver used for Type-C ports on rk3399.
Similar to hot-pluggable PCI controllers, the driver for this chip
removes the xhci controller from the system when the Type-C cable is
disconnected.
The solution for PCI devices works just as well for non-PCI devices
and avoids the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to xHCI spec, HCIVERSION containing a BCD encoding
of the xHCI specification revision number, 0100h corresponds
to xHCI version 1.0. Change "100" as "0x100".
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 04abb6de2825 ("xhci: Read and parse new xhci
1.1 capability register")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
because hcd_priv_size is already size of xhci_hcd struct,
extra_priv_size is not needed anymore for MTK and tegra drivers.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(),
so checks the Maximum Primary Stream Array Size in the hcc_params
register after adding primary hcd.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit b0c1e95ab44feaad8831f2c06a3473c974003b49. It
contains a flaw and the next version has more features added which makes
me want to move it to the next cycle.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
i2c/for-current
|
|
This reverts commit 02dbfa5e5583523035f05636c614a0eca77f1aab. I grabbed
the wrong version from the list and will pull the proper one from Peter
Rosin's mux tree.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|