summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-06-22drm/amd/display: Fix typo in override_lane_settingsGeorge Shen1-1/+1
[Why] The function currently skips overriding the drive settings of the first lane. [How] Change for loop to start at 0 instead of 1. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-06-22drm/amd/display: Fix DC warning at driver loadQingqing Zhuo1-1/+1
[Why] Wrong index was checked for dcfclk_mhz, causing false warning. [How] Fix the assertion index. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.18.x
2022-06-22drm/amd: Revert "drm/amd/display: keep eDP Vdd on when eDP stream is already ↵Mario Limonciello1-22/+2
enabled" A variety of Lenovo machines with Rembrandt APUs and OLED panels have stopped showing the display at login. This behavior clears up after leaving it idle and moving the mouse or touching keyboard. It was bisected to be caused by commit 559e2655220d ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled"). Revert this commit to fix the issue. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2047 Reported-by: Aaron Ma <aaron.ma@canonical.com> Fixes: 559e2655220d ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-22drm/amdgpu: Adjust logic around GTT size (v3)Alex Deucher1-6/+14
Certain GL unit tests for large textures can cause problems with the OOM killer since there is no way to link this memory to a process. This was originally mitigated (but not necessarily eliminated) by limiting the GTT size. The problem is this limit is often too low for many modern games so just make the limit 1/2 of system memory. The OOM accounting needs to be addressed, but we shouldn't prevent common 3D applications from being usable just to potentially mitigate that corner case. Set default GTT size to max(3G, 1/2 of system ram) by default. v2: drop previous logic and default to 3/4 of ram v3: default to half of ram to align with ttm v4: fix spelling in comment (Kent) Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1942 Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-22hinic: Replace memcpy() with direct assignmentKees Cook1-3/+1
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out. Avoid the whole thing and just do a direct assignment. This results in no change to the executable code. [This is a duplicate of commit 2c0ab32b73cf ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.] Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592 Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-22video: fbdev: omap: Remove duplicate 'the' in commentJiang Jian1-1/+1
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-22video: fbdev: omapfb: Align '*' in commentJiang Jian1-1/+1
Consider '*' alignment in comments Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-22drm/sun4i: Return if frontend is not presentSaud Farooqui1-1/+1
Added return statement in sun4i_layer_format_mod_supported() in case frontend is not present. Signed-off-by: Saud Farooqui <farooqui_saud@hotmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/PA4P189MB1421E93EF5F8E8E00E71B7878BB29@PA4P189MB1421.EURP189.PROD.OUTLOOK.COM
2022-06-22drm/vc4: fix error code in vc4_check_tex_size()Dan Carpenter1-1/+1
The vc4_check_tex_size() function is supposed to return false on error but this error path accidentally returns -ENODEV (which means true). Fixes: 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/YrMKK89/viQiaiAg@kili
2022-06-22iommu/ipmmu-vmsa: Fix compatible for rcar-gen4Yoshihiro Shimoda1-1/+1
Fix compatible string for R-Car Gen4. Fixes: ae684caf465b ("iommu/ipmmu-vmsa: Add support for R-Car Gen4") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220617010107.3229784-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-06-22Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in ↵Jakub Kicinski1-1/+1
vxge-main.c" This reverts commit 8fc74d18639a2402ca52b177e990428e26ea881f. BAR0 is the main (only?) register bank for this device. We most obviously can't unmap it before the netdev is unregistered. This was pointed out in review but the patch got reposted and merged, anyway. The author of the patch was only testing it with a QEMU model, which I presume does not emulate enough for the netdev to be brought up (author's replies are not visible in lore because they kept sending their emails in HTML). Link: https://lore.kernel.org/all/20220616085059.680dc215@kernel.org/ Fixes: 8fc74d18639a ("drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-22regmap-irq: Fix offset/index mismatch in read_sub_irq_data()Aidan MacDonald1-1/+2
We need to divide the sub-irq status register offset by register stride to get an index for the status buffer to avoid an out of bounds write when the register stride is greater than 1. Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support") Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220620200644.1961936-3-aidanmacdonald.0x0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chipsAidan MacDonald1-2/+3
When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register. Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22drm/sun4i: Add DMA mask and segment sizeJernej Skrabec1-0/+8
Kernel occasionally complains that there is mismatch in segment size when trying to render HW decoded videos and rendering them directly with sun4i DRM driver. Following message can be observed on H6 SoC: [ 184.298308] ------------[ cut here ]------------ [ 184.298326] DMA-API: sun4i-drm display-engine: mapping sg segment longer than device claims to support [len=6144000] [max=65536] [ 184.298364] WARNING: CPU: 1 PID: 382 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2b0/0x350 [ 184.322997] CPU: 1 PID: 382 Comm: ffmpeg Not tainted 5.19.0-rc1+ #1331 [ 184.329533] Hardware name: Tanix TX6 (DT) [ 184.333544] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 184.340512] pc : debug_dma_map_sg+0x2b0/0x350 [ 184.344882] lr : debug_dma_map_sg+0x2b0/0x350 [ 184.349250] sp : ffff800009f33a50 [ 184.352567] x29: ffff800009f33a50 x28: 0000000000010000 x27: ffff000001b86c00 [ 184.359725] x26: ffffffffffffffff x25: ffff000005d8cc80 x24: 0000000000000000 [ 184.366879] x23: ffff80000939ab18 x22: 0000000000000001 x21: 0000000000000001 [ 184.374031] x20: 0000000000000000 x19: ffff0000018a7410 x18: ffffffffffffffff [ 184.381186] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 184.388338] x14: 0000000000000001 x13: ffff800009534e86 x12: 6f70707573206f74 [ 184.395493] x11: 20736d69616c6320 x10: 000000000000000a x9 : 0000000000010000 [ 184.402647] x8 : ffff8000093b6d40 x7 : ffff800009f33850 x6 : 000000000000000c [ 184.409800] x5 : ffff0000bf997940 x4 : 0000000000000000 x3 : 0000000000000027 [ 184.416953] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003960e80 [ 184.424106] Call trace: [ 184.426556] debug_dma_map_sg+0x2b0/0x350 [ 184.430580] __dma_map_sg_attrs+0xa0/0x110 [ 184.434687] dma_map_sgtable+0x28/0x4c [ 184.438447] vb2_dc_dmabuf_ops_map+0x60/0xcc [ 184.442729] __map_dma_buf+0x2c/0xd4 [ 184.446321] dma_buf_map_attachment+0xa0/0x130 [ 184.450777] drm_gem_prime_import_dev+0x7c/0x18c [ 184.455410] drm_gem_prime_fd_to_handle+0x1b8/0x214 [ 184.460300] drm_prime_fd_to_handle_ioctl+0x2c/0x40 [ 184.465190] drm_ioctl_kernel+0xc4/0x174 [ 184.469123] drm_ioctl+0x204/0x420 [ 184.472534] __arm64_sys_ioctl+0xac/0xf0 [ 184.476474] invoke_syscall+0x48/0x114 [ 184.480240] el0_svc_common.constprop.0+0x44/0xec [ 184.484956] do_el0_svc+0x2c/0xc0 [ 184.488283] el0_svc+0x2c/0x84 [ 184.491354] el0t_64_sync_handler+0x11c/0x150 [ 184.495723] el0t_64_sync+0x18c/0x190 [ 184.499397] ---[ end trace 0000000000000000 ]--- Fix that by setting DMA mask and segment size. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220620181333.650301-1-jernej.skrabec@gmail.com
2022-06-22drm/vc4: hdmi: Fixed possible integer overflowSaud Farooqui1-1/+1
Multiplying ints and saving it in unsigned long long could lead to integer overflow before being type casted to unsigned long long. Addresses-Coverity: 1505113: Unintentional integer overflow. Signed-off-by: Saud Farooqui <farooqui_saud@hotmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/PA4P189MB1421E63C0FF3EBF234A80AB38BA79@PA4P189MB1421.EURP189.PROD.OUTLOOK.COM
2022-06-22USB: serial: option: add Quectel EM05-G modemYonglin Tan1-0/+3
The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-06-22USB: serial: pl2303: add support for more HXN (G) typesJohan Hovold1-12/+17
Add support for further HXN (G) type devices (GT variant, GL variant, GS variant and GR) and document the bcdDevice mapping. Note that the TA and TB types use the same bcdDevice as some GT and GE variants, respectively, but that the HX status request can be used to determine which is which. Also note that we currently do not distinguish between the various HXN (G) types in the driver but that this may change eventually (e.g. when adding GPIO support). Reported-by: Charles Yeh <charlesyeh522@gmail.com> Link: https://lore.kernel.org/r/YrF77b9DdeumUAee@hovoldconsulting.com Cc: stable@vger.kernel.org # 5.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-06-21net: phy: smsc: Disable Energy Detect Power-Down in interrupt modeLukas Wunner1-2/+4
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by: Simon Han <z.han@kunbus.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21ice: ethtool: Prohibit improper channel config for DCBAnatolii Gerasymenko2-5/+47
Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: ethtool: advertise 1000M speeds properlyAnatolii Gerasymenko1-1/+38
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: Fix switchdev rules book keepingWojciech Drewek1-0/+1
Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: ignore protocol field in GTP offloadMarcin Szycik1-1/+3
Commit 34a897758efe ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21dm: do not return early from dm_io_complete if BLK_STS_AGAIN without pollingMike Snitzer1-1/+3
Commit 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") inadvertently introduced an early return from dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN occurs and bio-polling is _not_ being used. Fix this by only returning early from dm_io_complete() if the bio has first been properly queued to DM. Otherwise, the bio will never finish via bio_endio. Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-21dm era: commit metadata in postsuspend after worker stopsNikos Tsironis1-1/+7
During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579d8487 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-21Merge tag 'efi-urgent-for-v5.19-1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - remove pointless include of asm/efi.h, which does not exist on ia64 - fix DXE service marshalling prototype for mixed mode * tag 'efi-urgent-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: libstub: Fix typo in __efi64_argmap* name efi: sysfb_efi: remove unnecessary <asm/efi.h> include
2022-06-21efi: sysfb_efi: remove unnecessary <asm/efi.h> includeJavier Martinez Canillas1-2/+0
Nothing defined in the header is used by drivers/firmware/efi/sysfb_efi.c but also, including it can lead to build errors when built on arches that don't have an asm/efi.h header file. This can happen for example if a driver that is built when COMPILE_TEST is enabled selects the SYSFB symbol, e.g. on powerpc with allyesconfig: drivers/firmware/efi/sysfb_efi.c:29:10: fatal error: asm/efi.h: No such file or directory 29 | #include <asm/efi.h> | ^~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-06-21MIPS: Remove repetitive increase irq_err_counthuhai1-2/+0
commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: huhai <huhai@kylinos.cn> Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-06-21drm/xen: Add missing VM_DONTEXPAND flag in mmap callbackOleksandr Tyshchenko1-1/+1
With Xen PV Display driver in use the "expected" VM_DONTEXPAND flag is not set (neither explicitly nor implicitly), so the driver hits the code path in drm_gem_mmap_obj() which triggers the WARNING. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://lore.kernel.org/r/1652104303-5098-1-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-21x86/xen: Remove undefined behavior in setup_features()Julien Grall1-1/+1
1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220617103037.57828-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-21xen-blkfront: Handle NULL gendiskJason Andryuk1-7/+12
When a VBD is not fully created and then closed, the kernel can have a NULL pointer dereference: The reproducer is trivial: [user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path 51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712 51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728 51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744 51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760 51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840 ^ note state, the /dev/sdz doesn't exist in the backend [user@dom0 ~]$ sudo xl block-detach work xvdi [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path work is an invalid domain identifier And its console has: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1 RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Call Trace: <TASK> blkback_changed+0x95/0x137 [xen_blkfront] ? read_reply+0x160/0x160 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront CR2: 0000000000000050 ---[ end trace 7bc9597fd06ae89d ]--- RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled info->rq and info->gd are only set in blkfront_connect(), which is called for state 4 (XenbusStateConnected). Guard against using NULL variables in blkfront_closing() to avoid the issue. The rest of blkfront_closing looks okay. If info->nr_rings is 0, then for_each_rinfo won't do anything. blkfront_remove also needs to check for non-NULL pointers before cleaning up the gendisk and request queue. Fixes: 05d69d950d9d "xen-blkfront: sanitize the removal state machine" Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220601195341.28581-1-jandryuk@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-21usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMICAndy Shevchenko1-1/+0
Intel SoC PMIC is a generic name for all PMICs that are used on Intel platforms. In particular, INTEL_SOC_PMIC kernel configuration option refers to Crystal Cove PMIC, which has never been a part of any Intel Broxton hardware. Drop wrong dependency from Kconfig. Note, the correct dependency is satisfied via ACPI PMIC OpRegion driver, which the Type-C depends on. Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220620104316.57592-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: gadget: uvc: fix list double add in uvcg_video_pumpDan Vacura1-0/+3
A panic can occur if the endpoint becomes disabled and the uvcg_video_pump adds the request back to the req_free list after it has already been queued to the endpoint. The endpoint complete will add the request back to the req_free list. Invalidate the local request handle once it's been queued. <6>[ 246.796704][T13726] configfs-gadget gadget: uvc: uvc_function_set_alt(1, 0) <3>[ 246.797078][ T26] list_add double add: new=ffffff878bee5c40, prev=ffffff878bee5c40, next=ffffff878b0f0a90. <6>[ 246.797213][ T26] ------------[ cut here ]------------ <2>[ 246.797224][ T26] kernel BUG at lib/list_debug.c:31! <6>[ 246.807073][ T26] Call trace: <6>[ 246.807180][ T26] uvcg_video_pump+0x364/0x38c <6>[ 246.807366][ T26] process_one_work+0x2a4/0x544 <6>[ 246.807394][ T26] worker_thread+0x350/0x784 <6>[ 246.807442][ T26] kthread+0x2ac/0x320 Fixes: f9897ec0f6d3 ("usb: gadget: uvc: only pump video data if necessary") Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220617163154.16621-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: gadget: Fix non-unique driver names in raw-gadget driverAlan Stern1-16/+46
In a report for a separate bug (which has already been fixed by commit 5f0b5f4d50fa "usb: gadget: fix race when gadget driver register via ioctl") in the raw-gadget driver, the syzbot console log included error messages caused by attempted registration of a new driver with the same name as an existing driver: > kobject_add_internal failed for raw-gadget with -EEXIST, don't try to register things with the same name in the same directory. > UDC core: USB Raw Gadget: driver registration failed: -17 > misc raw-gadget: fail, usb_gadget_register_driver returned -17 These errors arise because raw_gadget.c registers a separate UDC driver for each of the UDC instances it creates, but these drivers all have the same name: "raw-gadget". Until recently this wasn't a problem, but when the "gadget" bus was added and UDC drivers were registered on this bus, it became possible for name conflicts to cause the registrations to fail. The reason is simply that the bus code in the driver core uses the driver name as a sysfs directory name (e.g., /sys/bus/gadget/drivers/raw-gadget/), and you can't create two directories with the same pathname. To fix this problem, the driver names used by raw-gadget are made distinct by appending a unique ID number: "raw-gadget.N", with a different value of N for each driver instance. And to avoid the proliferation of error handling code in the raw_ioctl_init() routine, the error return paths are refactored into the common pattern (goto statements leading to cleanup code at the end of the routine). Link: https://lore.kernel.org/all/0000000000008c664105dffae2eb@google.com/ Fixes: fc274c1e9973 "USB: gadget: Add a new bus for gadgets" CC: Andrey Konovalov <andreyknvl@gmail.com> CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+02b16343704b3af1667e@syzkaller.appspotmail.com Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YqdG32w+3h8c1s7z@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-20video: fbdev: simplefb: Check before clk_put() not neededYihao Han1-2/+1
clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it. Signed-off-by: Yihao Han <hanyihao@vivo.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: au1100fb: Drop unnecessary NULL ptr checkYihao Han1-4/+2
clk_disable() already checks the clk ptr using IS_ERR_OR_NULL(clk) and clk_enable() checks the clk ptr using !clk, so there is no need to check clk ptr again before calling them. Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_writeHyunwoo Kim1-1/+1
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user(). Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20drm/i915/display: Re-add check for low voltage sku for max dp source rateJason A. Donenfeld1-3/+29
This reverts commit 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate"), which, on an i7-11850H iGPU with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1 embedded panel, causes wild flickering glitching technicolor pyrotechnics on resumption from suspend. The display shows strobing colors in an utter disaster explosion of pantone, as though bombs were dropped on the leprechauns at the base of the rainbow. Rebooting the machine fixes the issue, presumably because the display is initialized by firmware rather than by i915. Otherwise, the GPU appears to work fine. Bisection traced it back to this commit, which makes sense given the issues. Note: This re-opens, and puts back to the drawing board, https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed by the regressing commit. Fixes: 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com (cherry picked from commit d5929835080a60f9119d024fa42f315913942f76) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20regmap: Wire up regmap_config provided bulk write in missed functionsJavier Martinez Canillas1-6/+4
There are some functions that were missed by commit d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") when support to define bulk read/write callbacks in regmap_config was introduced. The regmap_bulk_write() and regmap_noinc_write() functions weren't changed to use the added map->write instead of the map->bus->write handler. Also, the regmap_can_raw_write() was not modified to take map->write into account. So will only return true if a bus with a .write callback is set. Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't setJavier Martinez Canillas1-0/+3
Before adding support to define bulk read/write callbacks in regmap_config by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config"), the regmap_noinc_read() function returned an errno early a map->bus->read callback wasn't set. But that commit dropped the check and now a call to _regmap_raw_read() is attempted even when bulk read operations are not supported. That function checks for map->read anyways but there's no point to continue if the read can't succeed. Also is a fragile assumption to make so is better to make it fail earlier. Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20regmap: Re-introduce bulk read support check in regmap_bulk_read()Javier Martinez Canillas1-1/+1
Support for drivers to define bulk read/write callbacks in regmap_config was introduced by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config"), but this commit wrongly dropped a check in regmap_bulk_read() to determine whether bulk reads can be done or not. Before that commit, it was checked if map->bus was set. Now has to check if a map->read callback has been set. Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20Merge tag 'scsi-fixes' of ↵Linus Torvalds6-55/+161
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight fixes, all in drivers (ufs, scsi_debug, storvsc, iscsi, ibmvfc). Apart from the ufs command clearing updates, these are mostly minor and obvious fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvfc: Store vhost pointer during subcrq allocation scsi: ibmvfc: Allocate/free queue resource only during probe/remove scsi: storvsc: Correct reporting of Hyper-V I/O size limits scsi: ufs: Fix a race between the interrupt handler and the reset handler scsi: ufs: Support clearing multiple commands at once scsi: ufs: Simplify ufshcd_clear_cmd() scsi: iscsi: Exclude zero from the endpoint ID range scsi: scsi_debug: Fix zone transition to full condition
2022-06-20udmabuf: add back sanity checkGerd Hoffmann1-1/+4
Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check. Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.") Reported-by: zdi-disclosures@trendmicro.com Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-20video: fbdev: skeletonfb: Convert to generic power managementBjorn Helgaas1-6/+7
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is deprecated. If drivers implement power management, they should use the generic power management framework, not the PCI-specific hooks. Convert the sample code to use the generic power management framework. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: cirrusfb: Remove useless reference to PCI power managementBjorn Helgaas1-6/+0
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is deprecated. The cirrusfb driver has never implemented power management at all, but if it ever does, it should use the generic power management framework, not the PCI-specific hooks. Remove the commented-out references to the PCI-specific power management hooks. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: intelfb: Initialize value of stolen sizePetr Cvek1-2/+2
Variable stolen_size can be left uninitialized in a code path with INTEL_855_GMCH_GMS_DISABLED. Fix this by initializing the variable to 0. Also fix indentation of function arguments. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: intelfb: Use aperture size from pci_resource_lenPetr Cvek1-7/+5
Aperture size for i9x5 variants is determined from PCI base address. if (pci_resource_start(pdev, 2) & 0x08000000) *aperture_size = MB(128); ... This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len(). The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20video: fbdev: skeletonfb: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'its'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-20spi: rockchip: Unmask IRQ at the final to avoid preemptionJon Lin1-4/+7
Avoid pio_write process is preempted, resulting in abnormal state. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Signed-off-by: Jon <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20220617124251.5051-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20USB: serial: option: add Telit LE910Cx 0x1250 compositionCarlo Lobrano1-0/+1
Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-06-20drm/i915/fdinfo: Don't show engine classes not presentTvrtko Ursulin1-2/+3
Stop displaying engine classes with no engines - it is not a huge problem if they are shown, since the values will correctly be all zeroes, but it does count as misleading. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 055634e4b62f ("drm/i915: Expose client engine utilisation via fdinfo") Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616140056.559074-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 9f1b1d0b2242171b2891a0398def233801601c14) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 09:49:42 +0000