summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-11-29isdn: bootup crash fixIngo Molnar1-2/+1
got this HiSax bootup crash on a "make randconfig" bzImage bootup: Calling initcall 0xc0bb1320: HiSax_init+0x0/0x380() HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: HFC-S driver Rev. 1.10.2.4 HFCS: defined at 0x500 IRQ 5 HZ 250 Teles 16.3c: IRQ 5 count 0 HFCS: resetting card Teles 16.3c: IRQ 5 count 0 Teles 16.3c: IRQ(5) getting no interrupts during init 1 HFCS: resetting card ------------[ cut here ]------------ kernel BUG at include/linux/timer.h:145! invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.24-rc3 #2045) EIP: 0060:[<c063afbf>] EFLAGS: 00010286 CPU: 0 EIP is at hfcs_card_msg+0x15f/0x180 EAX: c0cf2e5c EBX: 000000f2 ECX: 00000000 EDX: ffff1193 ESI: f76e8000 EDI: f76e8000 EBP: f7c23ec4 ESP: f7c23eac DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7c22000 task=f7c0e000 task.ti=f7c22000) Stack: 00000000 f7c23ec4 c011703b 00000002 f76e8000 00000000 f7c23ef8 c060c3e5 c0a7c9c0 c0a315dc 00000005 00000001 00000000 f7c23f34 00000000 c0b5c9c0 f7c23f34 00000000 c0f5a8e0 f7c23f80 c0bb154f 00000000 00000001 c0a9b5b9 Call Trace: [<c010339a>] show_trace_log_lvl+0x1a/0x40 [<c0103469>] show_stack_log_lvl+0xa9/0xe0 [<c010355f>] show_registers+0xbf/0x200 [<c01037a4>] die+0x104/0x220 [<c0103943>] do_trap+0x83/0xc0 [<c0103ca8>] do_invalid_op+0x88/0xa0 [<c083621a>] error_code+0x6a/0x70 [<c060c3e5>] checkcard+0x4a5/0x620 [<c0bb154f>] HiSax_init+0x22f/0x380 [<c0b867b7>] kernel_init+0x97/0x2a0 [<c0102f87>] kernel_thread_helper+0x7/0x20 ======================= Code: e8 43 ae ff 8b 57 3c 85 d2 0f 84 ef fe ff ff b8 a0 99 ad c0 b9 02 00 00 00 e8 ce 11 ae ff 83 c4 0c b8 00 00 00 00 5b 5e 5f c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 EIP: [<c063afbf>] hfcs_card_msg+0x15f/0x180 SS:ESP 0068:f7c23eac Kernel panic - not syncing: Attempted to kill init! The box has no HiSax card installed. the reason for the crash is add_timer() done on an already running timer. This happens because for some reason CARD_INIT is called twice. this patch works this problem around by using mod_timer() - this gets a booting system - but it would be nice to figure out why CARD_INIT is done twice. the ISDN config section (generated via make randconfig) is this: # # ISDN feature submodules # # CONFIG_ISDN_DRV_LOOP is not set CONFIG_ISDN_DIVERSION=y # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=y # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_0=y # CONFIG_HISAX_16_3 is not set # CONFIG_HISAX_TELESPCI is not set CONFIG_HISAX_S0BOX=y # CONFIG_HISAX_AVM_A1 is not set CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_IX1MICROR2=y CONFIG_HISAX_DIEHLDIVA=y # CONFIG_HISAX_ASUSCOM is not set # CONFIG_HISAX_TELEINT is not set CONFIG_HISAX_HFCS=y # CONFIG_HISAX_SEDLBAUER is not set CONFIG_HISAX_SPORTSTER=y # CONFIG_HISAX_MIC is not set # CONFIG_HISAX_NETJET is not set # CONFIG_HISAX_NETJET_U is not set # CONFIG_HISAX_NICCY is not set # CONFIG_HISAX_ISURF is not set # CONFIG_HISAX_HSTSAPHIR is not set # CONFIG_HISAX_BKM_A4T is not set # CONFIG_HISAX_SCT_QUADRO is not set # CONFIG_HISAX_GAZEL is not set # CONFIG_HISAX_HFC_PCI is not set # CONFIG_HISAX_W6692 is not set # CONFIG_HISAX_HFC_SX is not set # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # # # HiSax sub driver modules # CONFIG_HISAX_ST5481=y CONFIG_HISAX_HFCUSB=y # CONFIG_HISAX_HFC4S8S is not set CONFIG_HISAX_FRITZ_PCIPNP=y CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=y # CONFIG_ISDN_DRV_ACT2000 is not set CONFIG_HYSDN=m # CONFIG_ISDN_DRV_GIGASET is not set # CONFIG_ISDN_CAPI is not set CONFIG_PHONE=y CONFIG_PHONE_IXJ=m Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Karsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai@germaschewski.name> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29IP22ZILOG: fix lockup and sysrqThomas Bogendoerfer1-141/+106
- fix lockup when switching from early console to real console - make sysrq reliable - fix panic, if sysrq is issued before console is opened Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29dmaengine: correct invalid assumptions in the Kconfig textHaavard Skinnemoen1-3/+5
This patch corrects recently changed (and now invalid) Kconfig descriptions for the DMA engine framework: - Non-Intel(R) hardware also has DMA engines; - DMA is used for more than memcpy and RAID offloading. In fact, on most platforms memcpy and RAID aren't factors, and DMA exists so that peripherals can transfer data to/from memory while the CPU does other work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29atmel_lcdfb: LCDC startup fixAnti Sullin1-0/+4
This patch adds an additional loop, that delays turning off the DMA until the LCDC core has been turned off. This prevents the picture to be shifted some random length when the kernel re-initializes the LCDC. Without this patch, the LCDC keeps running for some small time after the PWRCON:LCD_PWR has been cleared ; the FIFO suffers an underrun and on re-starting the LCDC the FIFO data stays shifted. This behavior has been seen and fixed on AT91SAM9261-EK and two custom AT91SAM9261 boards, all of them having different LCD panels. Thanks a lot to Anti Sullin for submitting this patch (long time ago). Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29MFD: SM501 debug typo fixBen Dooks1-1/+1
Remove errnoeous x character from dev_dbg() call that stops the driver compiling under debug. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29drivers/pnp/resource.c: Add missing pci_dev_putJulia Lawall1-1/+3
There should be a pci_dev_put when breaking out of a loop that iterates over calls to pci_get_device and similar functions. This was fixed using the following semantic patch. // <smpl> @@ identifier d; type T; expression e; iterator for_each_pci_dev; @@ T *d; ... for_each_pci_dev(d) {... when != pci_dev_put(d) when != e = d ( return d; | + pci_dev_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Greg KH <greg@kroah.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fb_ddc: fix DDC lines quirkJean Delvare1-4/+4
The code in fb_ddc_read() is said to be based on the implementation of the radeon driver: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fc5891c8a3ba284f13994d7bc1f1bfa8283982de However, comparing the old radeon driver code with the new fb_ddc code reveals some differences. Most notably, the I2C bus lines are held at the end of the function, while the original code was releasing them (as the comment above correctly says.) There are a few other differences, which appear to be responsible for read failures on my system. While tracing low-level I2C code in i2c-algo-bit, I noticed that the initial attempt to read the EDID always failed. It takes one retry for the read to succeed. As we are about to remove this automatic retry property from i2c-algo-bit, reading the EDID would really fail. As a summary, the I2C lines quirk which is supposedly needed to read EDID on some older monitors is currently breaking the (first) read on all other monitors (and might not even work with older ones - did anyone try since October 2006?) After applying the patch below, which makes the code in fb_ddc_read() really similar to what the radeon driver used to have, the first EDID read succeeds again. On top of that, as it appears that this code has been broken for one year now and nobody seems to have complained, I'm curious if it makes sense to keep this quirk in place. It makes the code more complex and slower just for the sake of monitors which I guess nobody uses anymore. Can't we just get rid of it? Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Roger Leigh <rleigh@whinlatter.ukfsn.org> Tested-by: Michael Buesch <mb@bu3sch.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29m68k: zorro7xx needs <asm/amigahw.h>Geert Uytterhoeven1-0/+3
m68k: zorro7xx needs <asm/amigahw.h> if !CONFIG_AMIGA_PCMCIA Reported by Ingo Juergensmann <ij@2007.bluespice.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29spi: S3C2410: add bus number to SPI GPIO driverDavid Brownell1-0/+1
Allow passing a bus number through the platform data for the S3C2410 SPI GPIO driver. This is needed to support multiple SPI busses. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29S3C24XX: ensure we only configure valid GPIOsBen Dooks1-7/+13
If we specify an GPIO which cannot be used for the purpose, then assume that the GPIO is not to be used and do not try and configure it. This can be the case where the SPI bus is TX only. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29TPM: fix TIS device driver locality requestMarcel Selhorst1-5/+5
During the initialization of the TPM TIS driver, the necessary locality has to be requested earlier in the init-process. Depending on the used TPM chip, this leads to wrong information. For example: Lenovo X61s with Atmel TPM: tpm_tis 00:0a: 1.2 TPM (device-id 0xFFFF, rev-id 255) But correct is: tpm_tis 00:0c: 1.2 TPM (device-id 0x3203, rev-id 9) This short patch fixes this issue. Signed-off-by: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29PNP: increase the maximum number of resourcesZhao Yakui1-2/+13
On some systems the number of resources(IO,MEM) returnedy by PNP device is greater than the PNP constant, for example motherboard devices. It brings that some resources can't be reserved and resource confilicts. This will cause PCI resources are assigned wrongly in some systems, and cause hang. This is a regression since we deleted ACPI motherboard driver and use PNP system driver. [akpm@linux-foundation.org: fix text and coding-style a bit] Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Thomas Renninger <trenn@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29ps3fb: video memory size cleanupsGeert Uytterhoeven1-2/+9
- Limit video memory size to avoid crossing a 256 MiB boundary in IOIF space. - Pass the actual amount of video memory used to lv1_gpu_memory_allocate(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29ps3: prefix all ps3-specific kernel modules with `ps3-'Geert Uytterhoeven3-2/+2
- vuart.ko -> ps3-vuart.ko - sys-manager.ko -> ps3-sys-manager.ko Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29atmel_spi: label GPIOs betterDavid Brownell1-1/+1
Make the atmel_spi driver label GPIOs according to the device for which they're acting as a chipselect. This way the debugfs dump of gpio state is more informative. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds21-194/+226
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (25 commits) USB: s3c2410 gadget: ensure vbus pin in input mode during read USB: s3c2410 gadget: allow sharing of vbus irq USB: s3c2410 gadget: Header move fixups USB: usb-storage: unusual_devs entry for JetFlash TS1GJF2A USB: fix up EHCI startup synchronization USB: make the microtek driver and HAL cooperate USB: uevent environment key fix USB: keep track of whether interface sysfs files exist USB: sierra: new product id USB HCD: avoid duplicate local_irq_disable() USB: mailing lists have changed USB: remove USB HUB entry from MAINTAINERS USB: fix directory references in usb/README USB: add support for an older firmware revision for the Nikon D200 USB: FIx locks and urb->status in adutux (updated) USB: power-management documenation update USB: Fix signr comment in usbdevice_fs.h usbserial: fix inconsistent lock state USB: fix usbled disconnect read race #2 USB: free memory when writing fails in usb/serial/mos7840.c ...
2007-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds15-185/+188
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: pci hotplug: kernel-doc fixes pci-aer: fix kernel-doc mistakes PCI: drivers/pci/pci-sysfs.c: Add missing pci_dev_put PCI: pcie portdriver: initialize returned value
2007-11-28pci hotplug: kernel-doc fixesRandy Dunlap12-169/+169
acpiphp.h: not using kernel-doc, so change /** to /* acpiphp_core.c: lots of kernel-doc cleanups acpiphp_glue.c: lots of kernel-doc cleanups acpiphp_ibm.c: lots of kernel-doc cleanups cpqphp_core.c: lots of kernel-doc cleanups cpqphp_ctrl.c: lots of kernel-doc cleanups fakephp.c: correct kernel-doc notation pciehp_ctrl.c: correct kernel-doc notation rpadlpar_core.c: correct function names & kernel-doc notation rpaphp_core.c: correct kernel-doc notation shpchp_ctrl.c: correct kernel-doc notation Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28pci-aer: fix kernel-doc mistakesRandy Dunlap1-14/+15
Fix kernel-doc parameter names and ending block comments (change **/ to */). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Linas Vepstas <linas@linas.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28PCI: drivers/pci/pci-sysfs.c: Add missing pci_dev_putJulia Lawall1-1/+3
There should be a pci_dev_put when breaking out of a loop that iterates over calls to pci_get_device and similar functions. This was fixed using the following semantic patch. // <smpl> @@ identifier d; type T; expression e; iterator for_each_pci_dev; @@ T *d; ... for_each_pci_dev(d) {... when != pci_dev_put(d) when != e = d ( return d; | + pci_dev_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28PCI: pcie portdriver: initialize returned valueLinas Vepstas1-1/+1
The pcie protdrv status can be returned uninitialized, if there are no children under a device. This leads to bad responses downstream. Fix this. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: s3c2410 gadget: ensure vbus pin in input mode during readBen Dooks1-0/+4
Some CPUs in the S3C24XX series do not support readback of the value of a pin when the pin has been configured to an IRQ. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: s3c2410 gadget: allow sharing of vbus irqBen Dooks1-3/+3
If another driver wants to claim the vbus pin, say to notify the user of an connect/disconnect then allow the IRQ to be shared by specifiying IRQ_SHARED in the flags. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: s3c2410 gadget: Header move fixupsBen Dooks1-3/+3
Fixup the fallout from the arch moves earlier in the kernel series. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2007-11-28USB: usb-storage: unusual_devs entry for JetFlash TS1GJF2AAlan Stern1-0/+7
This patch (as1018) adds an unusual_devs entry for the JetFlash TS1GJF2A. This device doesn't like read requests for more than 188 sectors. Setting max_sectors down to 64 is overkill, but at least it will work without errors. For the torturous debugging history, see this thread: http://marc.info/?t=118745764700005&r=1&w=2 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix up EHCI startup synchronizationDavid Brownell1-1/+4
A recent patch added software synchronization during EHCI startup, so ports aren't switched away from the companion controllers after resets have started. This patch adds a short delay letting hardware finish that port switching before any new resets begin ... so both ends of that hardware race window are closed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dave Miller <davem@davemloft.net> Cc: Dely Sy <dely.l.sy@intel.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: make the microtek driver and HAL cooperateOliver Neukum1-1/+1
to make HAL like the microtek driver's devices the parent must be correctly set. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: uevent environment key fixAlan Stern3-35/+25
This patch (as1010) was written by both Kay Sievers and me. It solves the problem of duplicated keys in USB uevent structures by refactoring the uevent subroutines, taking advantage of the way the hotplug core calls uevent handlers for the device's bus and for the device's type. Keys needed for both USB-device and USB-interface events are added in usb_uevent(), which is the bus handler. Keys appropriate only for USB-device or USB-interface events are added in usb_dev_uevent() or usb_if_uevent() respectively, the type handlers. In addition, unnecessary tests for NULL pointers are removed as are duplicated debugging log statements. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: keep track of whether interface sysfs files existAlan Stern2-10/+8
This patch (as1009) solves the problem of multiple registrations for USB sysfs files in a more satisfying way than the existing code. It simply adds a flag to keep track of whether or not the files have been created; that way the files can be created or removed as needed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2007-11-28USB: sierra: new product idagilmore@wirelessbeehive.com1-0/+2
Per the maintainer of the usbserial/sierra.c driver, the patch below adds a new id to the list of supported cards for the sierra driver. Tested and working for me on Fedora 8, kernel 2.6.23 and on the more recent sierra.c available in http://www.sierrawireless.com/resources/support/Software/Linux/v.1.2.6b(kernel2.6.21).zip Hardware is a MiniPCI card in a Lenovo T61p. Signed-off-by: Andrew Gilmore <agilmore@wirelessbeehive.com> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB HCD: avoid duplicate local_irq_disable()Alan Stern1-1/+2
Arnd Bergmann wrote: usb_hcd_flush_endpoint() has a retry loop that starts with a spin_lock_irq(), but only gives up the spinlock, not the irq_disable before jumping to the rescan label. Alan Stern: I agree with your sentiment, but it would be better to solve this problem without using local_irq_disable(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix directory references in usb/READMEDirk Hohndel1-3/+3
Another one in the "ok, this is trivial to fix" list... :-) [PATCH] fix directory references in usb/README Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: add support for an older firmware revision for the Nikon D200Mike Pagano1-5/+5
This is a resubmission of the patch to upgrade the unusual_devs.h file to support an older firmware revision of the Nikon D200. This patch includes the requested /proc/bus/usb/devices information. T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=040f Rev= 1.00 S: Manufacturer=NIKON S: Product=NIKON DSC D200 S: SerialNumber=0000000 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Mike Pagano <mpagano@gentoo.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: FIx locks and urb->status in adutux (updated)Pete Zaitcev1-123/+139
Two main issues fixed here are: - An improper use of in-struct lock to protect an open count - Use of urb status for -EINPROGRESS Also, along the way: - Change usb_unlink_urb to usb_kill_urb. Apparently there's no need to use usb_unlink_urb whatsoever in this driver, and the old use of usb_kill_urb was outright racy (it unlinked and immediately freed). - Fix indentation in adu_write. Looks like it was damaged by a script. - Vitaly wants -EBUSY on multiply opens. - bInterval was taken from a wrong endpoint. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Tested-by: Vitaliy Ivanov <vitalivanov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28usbserial: fix inconsistent lock stateBorislav Petkov1-2/+3
In commit acd2a847e7fee7df11817f67dba75a2802793e5d usb_serial_generic_write() disables interrupts when taking &port->lock which is also taken in usb_serial_generic_read_bulk_callback() resulting in an inconsistent lock state due to the latter not disabling interrupts on the local cpu. Fix that by disabling interrupts in the latter call site also. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix usbled disconnect read race #2Oliver Neukum1-1/+3
usbled has a race where show methods for attributes in sysfs can follow a NULL pointer during disconnect. The correct ordering fixes it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: free memory when writing fails in usb/serial/mos7840.cRoel Kluin1-1/+1
Free buffer when writing ZLP_REG5 failed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: Fix priority mistakes in drivers/usb/core/hub.cRoel Kluin1-1/+1
Fixes priority mistakes similar to '!x & y' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28usb-storage: always set the allow_restart flagMauro Carvalho Chehab1-0/+4
This patch (as1000) sets the SCSI allow_restart flag for USB disk devices. In theory this should never hurt, and there definitely are devices out there (such as the Seagate 250-GB external drive) which need the flag to be set. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: pl2303: add support for Corega CG-USBRS232RMagnus Damm2-0/+4
pl2303: add support for Corega CG-USBRS232R This patch adds support for Corega CG-USBRS232R Serial Adapters. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: omap_udc build fixDavid Brownell1-3/+3
This fixes some build errors ... unclear how this got past earlier tests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix USB_OHCI_HCD_SSB dependenciesAdrian Bunk1-1/+1
This patch fixes a bug introduced by commit b22817b3c81cdb18ffe3d2debfee968731a8b5f4. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28create /sys/.../power when CONFIG_PM is setDaniel Drake4-16/+27
The CONFIG_SUSPEND changes in 2.6.23 caused a regression under certain configuration conditions (SUSPEND=n, USB_AUTOSUSPEND=y) where all USB device attributes in sysfs (idVendor, idProduct, ...) silently disappeared, causing udev breakage and more. The cause of this is that the /sys/.../power subdirectory is now only created when CONFIG_PM_SLEEP is set, however, it should be created whenever CONFIG_PM is set to handle the above situation. The following patch fixes the regression. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28allow LEGACY_PTYS to be set to 0Kay Sievers1-1/+1
The count of legacy pty devices can be set by a kernel commandline parameter. For the distro kernel, we would like to disable all pty's by default, but keep the opportunity to request devices on the kernel commandline. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds17-91/+112
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-scsi: use print_hex_dump from <linux/kernel.h> ide: More TSST drives with broken cable detection ali14xx: constify __initdata ide: remove bogus ide_fix_driveid() comment trm290: remove bogus init_hwif_trm290() comment piix: add HP compaq laptop to short cable list alim15x3: add Mitac 8317 and derivatives to ali_cable_override() ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist amd74xx: arm hack drivers/ide: Add missing "space" ide-cris: don't override ide_register_hw() result ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig ide: add CONFIG_IDE_H8300 config option ide/Kconfig: fix mpc8xx host driver dependencies macide/q40ide: add missing __init tag to {macide,q40ide}_init() aec62xx: Fix kernel oops in driver's probe function ide: skip ide_wait_not_busy() on noprobe-disks siimage: remove resetproc() method ide: don't set PIO mode on pre-EIDE drives sis5513.c: Add Packard Bell EasyNote K5305 to laptops
2007-11-27Merge branch 'for-linus' of ↵Linus Torvalds3-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: SVM: Fix FPU leak while emulating clts KVM: SVM: Unload guest fpu on vcpu_put() KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std KVM: x86 emulator: fix the saving of of the eip value KVM: x86 emulator: fix JMP_REL
2007-11-27Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-1/+2
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: scatterlist: add more safeguards Revert "ll_rw_blk: temporarily enable max_segments tweaking" mmc: Add missing sg_init_table() call block: Fix memory leak in alloc_disk_node() alpha: fix sg_page breakage blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.
2007-11-27Merge branch 'for-linus' of ↵Linus Torvalds7-37/+61
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Add missing counter increment in iser_data_buf_aligned_len() IB/ehca: Fix static rate regression mlx4_core: Fix state check in mlx4_qp_modify() IB/ipath: Normalize error return codes for posting work requests IB/ipath: Fix offset returned to ibv_modify_srq() IB/ipath: Fix error path in QP creation IB/ipath: Fix offset returned to ibv_resize_cq()
2007-11-27Merge branch 'for-linus' of ↵Linus Torvalds5-18/+48
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: adds the context menu key (HUT GenDesc 0x84) Input: add definitions for frame forward and frame back keys Input: bf54x-keys - keypad does not exist on BF544 parts Input: gpio-keys - request and configure GPIOs Input: i8042 - add i8042.noloop quirk for MS Virtual Machine Sonypi: use synchronize_irq instead of sycnronize_sched sonypi: fit input devices into sysfs tree sony-laptop: fit input devices into sysfs tree
2007-11-27ide-scsi: use print_hex_dump from <linux/kernel.h>Denis Cheng1-14/+8
these utilities implemented in lib/hexdump.c are more handy, please use this. Bart: - s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy - s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/ - don't include ASCII dump - respect 80-columns limit Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 01:02:39 +0000