summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-12-05tty: Don't block on IO when ldisc change is pendingDmitry Safonov4-7/+14
There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty: Hold tty_ldisc_lock() during tty_reopen()Dmitry Safonov1-2/+7
tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup() nor set_ldisc() nor tty_ldisc_release() as they use tty lock. But it races with anyone who expects line discipline to be the same after hoding read semaphore in tty_ldisc_ref(). We've seen the following crash on v4.9.108 stable: BUG: unable to handle kernel paging request at 0000000000002260 IP: [..] n_tty_receive_buf_common+0x5f/0x86d Workqueue: events_unbound flush_to_ldisc Call Trace: [..] n_tty_receive_buf2 [..] tty_ldisc_receive_buf [..] flush_to_ldisc [..] process_one_work [..] worker_thread [..] kthread [..] ret_from_fork tty_ldisc_reinit() should be called with ldisc_sem hold for writing, which will protect any reader against line discipline changes. Cc: Jiri Slaby <jslaby@suse.com> Cc: stable@vger.kernel.org # b027e2298bd5 ("tty: fix data race between tty_init_dev and flush of buf") Reviewed-by: Jiri Slaby <jslaby@suse.cz> Reported-by: syzbot+3aa9784721dfb90e984d@syzkaller.appspotmail.com Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Dmitry Safonov <dima@arista.com> Tested-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty/ldsem: Wake up readers after timed out down_write()Dmitry Safonov1-0/+10
ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty/sysrq: Do not call sync directly from sysrq_do_reset()Mark Tomlinson1-2/+1
sysrq_do_reset() is called in softirq context, so it cannot call sync() directly. Instead, call orderly_reboot(), which creates a work item to run /sbin/reboot, or do emergency_sync and restart if the command fails. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05serial: 8250-mtk: add uart DMA supportLong Cheng1-1/+209
Modify uart register to support DMA function. Signed-off-by: Long Cheng <long.cheng@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty: xilinx_uartps: Correct return value in probeRajan Vaja1-14/+12
Existing driver checks for alternate clock if devm_clk_get() fails and returns error code for last clock failure. If xilinx_uartps is called before clock driver, devm_clk_get() returns -EPROBE_DEFER. In this case, probe should not check for alternate clock as main clock is already present in DTS and return -EPROBE_DEFER only. This patch fixes it by not checking for alternate clock when main clock get returns -EPROBE_DEFER. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty: serial: qcom_geni_serial: Fix softlockRyan Case1-17/+39
Transfers were being divided into device FIFO sized (64 byte max) operations which would poll for completion within a spin_lock_irqsave / spin_unlock_irqrestore block. This both made things slow by waiting for the FIFO to completely drain before adding further data and would also result in softlocks on large transmissions. This patch allows larger transfers with continuous FIFO additions as space becomes available and removes polling from the interrupt handler. Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05Revert "serial/sunsu: add missing of_node_put()"Greg Kroah-Hartman1-15/+5
This reverts commit 20d8e8611eb0596047fd4389be7a7203a883b9bf. As David Miller points out, it's wrong. Reported-by: David Miller <davem@davemloft.net> Cc: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serdev: document the write functions using kernel-docJohan Hovold1-0/+37
Document the asynchronous serdev_device_write_buf() and synchronous serdev_device_write() functions using kernel-doc. Specifically, mention that writing data only means that data has been buffered by the controller, and that the synchronous helper depends on serdev_device_write_wakeup() being called in the driver write_wakeup() callback. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serdev: make synchronous write helper interruptibleJohan Hovold1-6/+14
Allow the synchronous serdev_device_write() helper to be interrupted. This is useful for cases where I/O is performed on behalf of user space and we don't want to block indefinitely when using flow control. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serdev: make synchronous write return bytes writtenJohan Hovold3-4/+12
Make the synchronous serdev_device_write() helper behave analogous to the asynchronous serdev_device_write_buf() by returning the number of bytes written (or rather buffered) also on timeout. This will allow drivers to distinguish the case where data was partially written from the case where no data was written. Also update the only two users that checked the return value. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serdev: use zero to indicate infinite write timeoutJohan Hovold1-2/+5
Use zero to indicate infinite timeout for the synchronous serdev_device_write() helper. This allows drivers to specify an infinite timeout without knowing about serdev implementation details, while also allowing the same timeout argument to be used for both serdev_device_write() and serdev_device_wait_until_sent(). Note that passing zero to the current helper makes no sense; just call the asynchronous serdev_device_write_buf() directly instead. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27Merge 4.20-rc4 into tty-nextGreg Kroah-Hartman217-1328/+2111
We need the gsps fixes in here for some other serdev patches we will be merging into this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27sysrq: Use panic() to force a crashMatthias Kaehlcke1-10/+3
sysrq_handle_crash() currently forces a crash by dereferencing a NULL pointer, which is undefined behavior in C. Just call panic() instead, which is simpler and doesn't depend on compiler specific handling of the undefined behavior. Remove the comment on why the RCU lock needs to be released, it isn't accurate anymore since the crash now isn't handled by the page fault handler (for reference: the comment was added by commit 984cf355aeaa ("sysrq: Fix warning in sysrq generated crash.")). Releasing the lock is still good practice though. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27tty/sysrq: add of_node_put()Yangtao Li1-0/+2
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. bl_idle_init() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serial: imx: fix error handling in console_setupStefan Agner1-1/+1
The ipg clock only needs to be unprepared in case preparing per clock fails. The ipg clock has already disabled at the point. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serial: mvebu-uart: initialize over sampling stack registerMiquel Raynal1-1/+6
The baudrate derivation relies on the state of the programmable over sampling stack (OSAMP register) being empty, while never initializing it. Set all the fields of this register to 0 (except reserved areas) to ensure a x16 divisor, as assumed by the driver. The suspend/resume callbacks are untouched because they already save/restore correctly this register. Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serial: mvebu-uart: clarify the baud rate derivationMiquel Raynal1-8/+14
The current comment in ->set_baud_rate() is rather incomplete as it fails to describe what are the actual stages for the baudrate derivation. Replace this comment with something more explicit and close to the functional specification. Also adapt the variable names to it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serial/sunsu: add missing of_node_put()Yangtao Li1-5/+15
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27drivers/tty: add missing of_node_put()Yangtao Li1-0/+1
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27serial-uartlite: fix null pointer dereference on pointer portColin Ian King1-5/+10
Pointer port is dereferenced on port->private_data when assigning pointer pdata before port is null checked, leading to a potential null pointer dereference. Fix this by assigning pdata after the null pointer check on port. Detected by CoverityScan, CID#1475434 ("Dereference before null check") Fixes: 3b209d253e7f ("serial-uartlite: Do not use static struct uart_driver out of probe()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-24Merge branch 'for-linus' of ↵Linus Torvalds8-396/+158
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds42-211/+309
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
2018-11-23net: gemini: Fix copy/paste errorAndreas Fiedler1-1/+1
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: phy: mscc: fix deadlock in vsc85xx_default_configQuentin Schulz1-9/+5
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi1-1/+3
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: amd: add missing of_node_put()Yangtao Li1-1/+3
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu1-2/+0
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang1-2/+3
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang1-6/+2
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23Merge tag 'for-linus-20181123' of git://git.kernel.dk/linux-blockLinus Torvalds1-10/+63
Pull block fix from Jens Axboe: "Just a single fix for this week, fixing an issue with nvme-fc" * tag 'for-linus-20181123' of git://git.kernel.dk/linux-block: nvme-fc: resolve io failures during connect
2018-11-23Merge tag 'iommu-fixes-v4.20-rc3' of ↵Linus Torvalds4-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and an unbalance in an allocate/free path (allocated with memremap, freed with iounmap) - Fix for a crash in the Renesas IOMMU driver - Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the AMD IOMMU driver * tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Use memunmap to free memremap amd/iommu: Fix Guest Virtual APIC Log Tail Address Register iommu/ipmmu-vmsa: Fix crash on early domain free iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
2018-11-23Merge tag 'acpi-4.20-rc4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent the ACPI core from registering a platform device for the SMB0001 HID to avoid IRQ allocation issues (Hans de Goede)" * tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / platform: Add SMB0001 HID to forbidden_id_list
2018-11-23Merge tag 'pm-4.20-rc4' of ↵Linus Torvalds2-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues in the Operating Performance Points (OPP) framework, one cpufreq driver issue, one problem related to the tasks freezer and a few build-related issues in the cpupower utility. Specifics: - Fix tasks freezer deadlock in de_thread() that occurs if one of its sub-threads has been frozen already (Chanho Min). - Avoid registering a platform device by the ti-cpufreq driver on platforms that cannot use it (Dave Gerlach). - Fix a mistake in the ti-opp-supply operating performance points (OPP) driver that caused an incorrect reference voltage to be used and make it adjust the minimum voltage dynamically to avoid hangs or crashes in some cases (Keerthy). - Fix issues related to compiler flags in the cpupower utility and correct a linking problem in it by renaming a file with a duplicate name (Jiri Olsa, Konstantin Khlebnikov)" * tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: exec: make de_thread() freezable cpufreq: ti-cpufreq: Only register platform_device when supported opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call opp: ti-opp-supply: Dynamically update u_volt_min tools cpupower: Override CFLAGS assignments tools cpupower debug: Allow to use outside build flags tools/power/cpupower: fix compilation with STATIC=true
2018-11-23Merge tag 'gpio-v4.20-2' of ↵Linus Torvalds3-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Minor stuff except the IDA leak which was kind of important to fix. Also new maintainers, yay. - Do not lose an IDA on the gpiochip register errorpath. - Fix the PXA non-pincontrol GPIO-using platforms. - Fix the direction on the mockup GPIO driver. - Add some MAINTAINERS stuff: Bartosz stepped up as GPIO co-maintainer, and Andy established an Intel git tree" * tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: MAINTAINERS: Do maintain Intel GPIO drivers via separate tree gpio: mockup: fix indicated direction gpio: pxa: fix legacy non pinctrl aware builds again gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path MAINTAINERS: add myself as co-maintainer of gpiolib
2018-11-23Merge tag 'mmc-v4.20-rc2' of ↵Linus Torvalds1-3/+83
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-pci: Fixup card detect lookup - sdhci-pci: Workaround GLK firmware bug for tuning" * tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
2018-11-23Merge tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds24-63/+273
Pull drm fixes from Dave Airlie: "Regular drm fixes: amdgpu: - Vega20 fixes - firmware loading fix - panel display fix - override fix i915: - Sandybridge lockup fix - fastboot DSI panel fix - GPU hang on Broxton - GPU reloc fixes on pineview/bearlake ast: - screen blurring fix - cursor appearance fix udmabuf: - mmap fix vc4: - NULL deref fix - async cursor update fix All seems pretty normal at this stage" * tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm: drm/ast: fixed cursor may disappear sometimes drm/ast: change resolution may cause screen blurred drm/i915: Add rotation readout for plane initial config drm/i915: Force a LUT update in intel_initial_commit() drm/fb-helper: Blacklist writeback when adding connectors to fbdev drm/i915: Write GPU relocs harder with gen3 drm/amdgpu: Enable HDP memory light sleep drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture drm/amd/pp: handle negative values when reading OD drm/amdgpu: Add missing firmware entry for HAINAN drm/amd/powerplay: disable Vega20 DS related features drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset drm/i915: Disable LP3 watermarks on all SNB machines drm/ast: Remove existing framebuffers before loading driver udmabuf: set read/write flag when exporting drm/amd/display: Support amdgpu "max bpc" connector property (v2) drm/amdgpu: Add amdgpu "max bpc" connector property (v2) drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates drm/vc4: Fix NULL pointer dereference in the async update path
2018-11-23Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki1-5/+21
* pm-cpufreq: cpufreq: ti-cpufreq: Only register platform_device when supported * pm-sleep: exec: make de_thread() freezable
2018-11-23Merge tag 'drm-intel-fixes-2018-11-22' of ↵Dave Airlie7-4/+112
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225 - Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines - Avoid GPU hang on error capture on Broxton with Vt-d enabled - Avoid missing GPU relocations on Pineview and Bearlake (Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181122120555.GA18282@jlahtine-desk.ger.corp.intel.com
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi1-2/+7
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22Merge tag 'char-misc-4.20-rc4' of ↵Linus Torvalds9-22/+42
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for issues that have been reported. Nothing major, highlights include: - gnss sync write fixes - uio oops fix - nvmem fixes - other minor fixes and some documentation/maintainers updates Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/security-bugs: Postpone fix publication in exceptional cases MAINTAINERS: Add Sasha as a stable branch maintainer gnss: sirf: fix synchronous write timeout gnss: serial: fix synchronous write timeout uio: Fix an Oops on load test_firmware: fix error return getting clobbered nvmem: core: fix regression in of_nvmem_cell_get() misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data drivers/misc/sgi-gru: fix Spectre v1 vulnerability Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up slimbus: ngd: remove unnecessary check
2018-11-22Merge tag 'usb-4.20-rc4' of ↵Linus Torvalds18-55/+162
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.20-rc4. There's the usual xhci and dwc2/3 fixes as well as a few minor other issues resolved for problems that have been reported. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdc-acm: add entry for Hiro (Conexant) modem usb: xhci: Prevent bus suspend if a port connect change or polling state is detected usb: core: Fix hub port connection events lost usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" usb: dwc2: pci: Fix an error code in probe usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc usb: xhci: fix timeout for transition from RExit to U0 usb: xhci: fix uninitialized completion when USB3 port got wrong status xhci: Add check for invalid byte size error when UAS devices are connected. xhci: handle port status events for removed USB3 hcd xhci: Fix leaking USB3 shared_hcd at xhci removal USB: misc: appledisplay: add 20" Apple Cinema Display USB: quirks: Add no-lpm quirk for Raydium touchscreens usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub usb: dwc3: gadget: Properly check last unaligned/zero chain TRB usb: dwc3: core: Clean up ULPI device
2018-11-22Merge tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtdLinus Torvalds4-55/+137
Pull mtd fixes from Boris Brezillon: "SPI NOR fixes: - Various fixes related to the SFDP parsing code merged in 4.20 - Fix for a page fault in the cadence-qspi NAND fixes: - Fix a macro name conflict between the QCOM NAND controller driver and the RISC-V asm headers - Fix of-node handling in the atmel driver" * tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd: mtd: spi-nor: fix selection of uniform erase type in flexible conf mtd: spi-nor: Fix Cadence QSPI page fault kernel panic mtd: rawnand: qcom: Namespace prefix some commands mtd: rawnand: atmel: fix OF child-node lookup mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw() mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use() mtd: spi-nor: fix iteration over smpt array mtd: spi-nor: don't drop sfdp data if optional parsers fail
2018-11-22Merge tag 'scsi-fixes' of ↵Linus Torvalds4-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes. The qla2xxx is a regression from 4.18 and the ufs one is a device enablement fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
2018-11-22iommu/vt-d: Use memunmap to free memremapPan Bian1-1/+1
memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires1-45/+0
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling ↵Benjamin Tissoires1-34/+13
acceleration"" This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"Benjamin Tissoires1-245/+4
This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-01 14:43:04 +0000