summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-11-11ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnxDaniel Borkmann1-3/+1
Status variable is never initialized, can carry an arbitrary value on the stack and thus may let the function fail. Fixes: e90dd2645664 ("ixgbe: Make return values more direct") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: phy: Correctly handle MII ioctl which changes autonegotiation.Brian Hill1-12/+24
When advertised capabilities are changed with mii-tool, such as: mii-tool -A 10baseT the existing handler has two errors. - An actual PHY register value is provided by mii-tool, and this must be mapped to internal state with mii_adv_to_ethtool_adv_t(). - The PHY state machine needs to be told that autonegotiation has again been performed. If not, the MAC will not be notified of the new link speed and duplex, resulting in a possible config mismatch. Signed-off-by: Brian Hill <Brian@houston-radar.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net: ppp: Don't call bpf_prog_create() in ppp_lockTakashi Iwai1-20/+20
In ppp_ioctl(), bpf_prog_create() is called inside ppp_lock, which eventually calls vmalloc() and hits BUG_ON() in vmalloc.c. This patch works around the problem by moving the allocation outside the lock. The bug was revealed by the recent change in net/core/filter.c, as it allocates via vmalloc() instead of kmalloc() now. Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net/mlx4_en: Advertize encapsulation offloads features only when VXLAN ↵Or Gerlitz1-8/+14
tunnel is set Currenly we only support Large-Send and TX checksum offloads for encapsulated traffic of type VXLAN. We must make sure to advertize these offloads up to the stack only when VXLAN tunnel is set. Failing to do so, would mislead the the networking stack to assume that the driver can offload the internal TX checksum for GRE packets and other buggy schemes. Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4 : Fix bug in DCB app deletionAnish Bhatt1-1/+2
Unlike CEE, IEEE has a bespoke app delete call and does not rely on priority for app deletion Fixes : 2376c879b80c ('cxgb4 : Improve handling of DCB negotiation or loss thereof') Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10udptunnel: Add SKB_GSO_UDP_TUNNEL during gro_complete.Jesse Gross1-0/+2
When doing GRO processing for UDP tunnels, we never add SKB_GSO_UDP_TUNNEL to gso_type - only the type of the inner protocol is added (such as SKB_GSO_TCPV4). The result is that if the packet is later resegmented we will do GSO but not treat it as a tunnel. This results in UDP fragmentation of the outer header instead of (i.e.) TCP segmentation of the inner header as was originally on the wire. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4vf: FL Starvation Threshold needs to be larger than the SGE's Egress ↵Hariprasad Shenai3-7/+15
Congestion Threshold Free List Starvation Threshold needs to be larger than the SGE's Egress Congestion Threshold or we'll end up in a mutual stall where the driver waits for Ingress Packets to drive replacing Free List Pointers and the SGE waits for Free List Pointers before pushing Ingress Packets to the host. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4/cxgb4vf: For T5 use Packing and Padding Boundaries for SGE DMA transfersHariprasad Shenai6-11/+135
T5 introduces the ability to have separate Packing and Padding Boundaries for SGE DMA transfers from the chip to Host Memory. This change set takes advantage of that to set up a smaller Padding Boundary to conserve PCI Link and Memory Bandwidth with T5. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4vf: Move fl_starv_thres into adapter->sge data structureHariprasad Shenai2-40/+61
Move fl_starv_thres into adapter->sge data structure since it _could_ be different from adapter to adapter. Also move other per-adapter SGE values which had been treated as driver globals into adapter->sge. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07asix: Do full reset during ax88772_bindCharles Keepax1-13/+1
commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772") causes the ethernet on Arndale to no longer function. This appears to be because the Arndale ethernet requires a full reset before it will function correctly, however simply reverting the above patch causes problems with ethtool settings getting reset. It seems the problem is that the ethernet is not properly reset during bind, and indeed the code in ax88772_bind that resets the device is a very small subset of the actual ax88772_reset function. This patch uses ax88772_reset in place of the existing reset code in ax88772_bind which removes some code duplication and fixes the ethernet on Arndale. It is still possible that the original patch causes some issues with suspend and resume but that seems like a separate issue and I haven't had a chance to test that yet. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07net: fec: fix regression on i.MX28 introduced by rx_copybreak supportLothar Waßmann1-4/+19
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") introduced a regression for i.MX28. The swap_buffer() function doing the endian conversion of the received data on i.MX28 may access memory beyond the actual packet size in the DMA buffer. fec_enet_copybreak() does not copy those bytes, so that the last bytes of a packet may be filled with invalid data after swapping. This will likely lead to checksum errors on received packets. E.g. when trying to mount an NFS rootfs: UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36 Do the byte swapping and copying to the new skb in one go if necessary. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06Merge tag 'master-2014-11-04' of ↵David S. Miller6-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-06 Please pull this batch of fixes intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This contains another small set of fixes for 3.18, these are all over the place and most of the bugs are old, one even dates back to the original mac80211 we merged into the kernel." For the iwlwifi bits, Emmanuel says: "I fix here two issues that are related to the firmware loading flow. A user reported that he couldn't load the driver because the rfkill line was pulled up while we were running the calibrations. This was happening while booting the system: systemd was restoring the "disable wifi settings" and that raised an RFKILL interrupt during the calibration. Our driver didn't handle that properly and this is now fixed." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06netxen: Fix link event handling.Manish Chopra1-1/+2
o Poll for the link events only if firmware doesn't have capability to notify the driver for the link events. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06enic: update desc properly in rx_copybreakGovindarajulu Varadarajan1-12/+2
When we reuse the rx buffer, we need to update the desc. If not hardware sees stale value. In the following crash, when mtu is changed, hardware sees old rx buffer value and crashes on skb_put. Fix this by using enic_queue_rq_desc helper function which updates the necessary desc. [ 64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3 [ 64.659965] ------------[ cut here ]------------ [ 64.661322] kernel BUG at net/core/skbuff.c:100! [ 64.662644] invalid opcode: 0000 [#1] PREEMPT SMP [ 64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod [ 64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-10335-g942396b-dirty #273 [ 64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 64.664834] RIP: 0010:[<ffffffff81392cf1>] [<ffffffff81392cf1>] skb_panic+0x61/0x70 [ 64.664834] RSP: 0018:ffff880210603d48 EFLAGS: 00010292 [ 64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000 [ 64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff [ 64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001 [ 64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40 [ 64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001 [ 64.664834] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 64.664834] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0 [ 64.664834] Stack: [ 64.664834] ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000 [ 64.664834] ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d [ 64.664834] 0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332 [ 64.664834] Call Trace: [ 64.664834] <IRQ> [ 64.664834] [ 64.664834] [<ffffffff81392d54>] skb_put+0x54/0x60 [ 64.664834] [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic] [ 64.664834] [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic] [ 64.664834] [<ffffffff813a5499>] net_rx_action+0x139/0x210 [ 64.664834] [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20 [ 64.664834] [<ffffffff8106110e>] __do_softirq+0x14e/0x280 [ 64.664834] [<ffffffff8106152e>] irq_exit+0x8e/0xb0 [ 64.664834] [<ffffffff8100fd21>] do_IRQ+0x61/0x100 [ 64.664834] [<ffffffff814a2bf2>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06enic: handle error condition properly in enic_rq_indicate_bufGovindarajulu Varadarajan1-0/+6
In case of error in rx path, we free the buf->os_buf but we do not make it NULL. In next iteration we use the skb which is already freed. This causes the following crash. [ 886.154772] general protection fault: 0000 [#1] PREEMPT SMP [ 886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common [ 886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-05668-g876bc7f #272 [ 886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 886.155356] RIP: 0010:[<ffffffff81384030>] [<ffffffff81384030>] kfree_skb_list+0x10/0x30 [ 886.155418] RSP: 0018:ffff880210603d48 EFLAGS: 00010206 [ 886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000 [ 886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017 [ 886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001 [ 886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00 [ 886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80 [ 886.155699] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 886.155774] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0 [ 886.155865] Stack: [ 886.155882] 0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00 [ 886.155942] ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf [ 886.156001] ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0 [ 886.156061] Call Trace: [ 886.156080] <IRQ> [ 886.156095] [ 886.156112] [<ffffffff81383f79>] skb_release_data+0xa9/0xc0 [ 886.157656] [<ffffffff81383faf>] skb_release_all+0x1f/0x30 [ 886.159195] [<ffffffff8138406d>] consume_skb+0x1d/0x40 [ 886.160719] [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40 [ 886.162224] [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic] [ 886.163756] [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic] [ 886.164730] [<ffffffff81397e29>] net_rx_action+0x139/0x210 [ 886.164730] [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280 [ 886.164730] [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0 [ 886.164730] [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100 [ 886.164730] [<ffffffff81496832>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net/mlx5_core: Fix race on driver loadEli Cohen1-2/+2
When events arrive at driver load, the event handler gets called even before the spinlock and list are initialized. Fix this by moving the initialization before EQs creation. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net/mlx5_core: Fix race in create EQEli Cohen1-4/+3
After the EQ is created, it can possibly generate interrupts and the interrupt handler is referencing eq->dev. It is therefore required to set eq->dev before calling request_irq() so if an event is generated before request_irq() returns, we will have a valid eq->dev field. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06drivers: net: cpsw: remove cpsw_ale_stop from cpsw_ale_destroyMugunthan V N1-1/+0
when cpsw is build as modulea and simple insert and removal of module creates a deadlock, due to delete timer. the timer is created and destroyed in cpsw_ale_start and cpsw_ale_stop which are from device open and close. root@am437x-evm:~# modprobe -r ti_cpsw [ 158.505333] INFO: trying to register non-static key. [ 158.510623] the code is fine but needs lockdep annotation. [ 158.516448] turning off the locking correctness validator. [ 158.522282] CPU: 0 PID: 1339 Comm: modprobe Not tainted 3.14.23-00445-gd41c88f #44 [ 158.530359] [<c0015380>] (unwind_backtrace) from [<c0012088>] (show_stack+0x10/0x14) [ 158.538603] [<c0012088>] (show_stack) from [<c054ad70>] (dump_stack+0x78/0x94) [ 158.546295] [<c054ad70>] (dump_stack) from [<c0088008>] (__lock_acquire+0x176c/0x1b74) [ 158.554711] [<c0088008>] (__lock_acquire) from [<c0088944>] (lock_acquire+0x9c/0x104) [ 158.563043] [<c0088944>] (lock_acquire) from [<c004e520>] (del_timer_sync+0x44/0xd8) [ 158.571289] [<c004e520>] (del_timer_sync) from [<bf2eac1c>] (cpsw_ale_destroy+0x10/0x3c [ti_cpsw]) [ 158.580821] [<bf2eac1c>] (cpsw_ale_destroy [ti_cpsw]) from [<bf2eb268>] (cpsw_remove+0x30/0xa0 [ti_cpsw]) [ 158.591000] [<bf2eb268>] (cpsw_remove [ti_cpsw]) from [<c035ef44>] (platform_drv_remove+0x18/0x1c) [ 158.600527] [<c035ef44>] (platform_drv_remove) from [<c035d8bc>] (__device_release_driver+0x70/0xc8) [ 158.610236] [<c035d8bc>] (__device_release_driver) from [<c035e0d4>] (driver_detach+0xb4/0xb8) [ 158.619386] [<c035e0d4>] (driver_detach) from [<c035d6e4>] (bus_remove_driver+0x4c/0x90) [ 158.627988] [<c035d6e4>] (bus_remove_driver) from [<c00af2a8>] (SyS_delete_module+0x10c/0x198) [ 158.637144] [<c00af2a8>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48) [ 179.524727] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1487, c=1486, q=6) [ 179.535741] INFO: Stall ended before state dump start Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: mv643xx_eth: reclaim TX skbs only when released by the HWKarl Beldan1-8/+10
ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO') Reported-by: Slawomir Gajzner <slawomir.gajzner@gmail.com> Reported-by: Julien D'Ascenzio <jdascenzio@yahoo.fr> Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix atomicity in pm routinesGiuseppe CAVALLARO1-13/+16
This patch is to fix the atomicity when suspend and resume the driver. The clk api have been changed (as reported by Hao Liang) and the skb allocation is done out of the hw setup function and taking care about the GFP flags. Reported-by: Hao Liang <hliang1025@gmail.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Hao Liang <hliang1025@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix concurrency in eee initialization.Giuseppe CAVALLARO1-6/+9
This patch aims to fix the concurrency in eee initialization inside the stmmac driver and related warnings when enable DEBUG_ATOMIC_SLEEP. Prior this patch, the stmmac_eee_init could be called in several places as shown below: stmmac_open stmmac_resume PHY Layer | | | stmmac_hw_setup stmmac_adjust_link | | stmmac ethtool |__________________________|______________| | stmmac_eee_init The patch removes the stmmac_eee_init call inside the stmmac_hw_setup that is unnecessary. It is sufficient to call it in the adjust_link to always guarantee that EEE is always configured at mac level too. Fixing the lock protection now it is covered another case (not considered before). The stmmac_eee_init could be called by the ethtool so critical sections must be protected inside this function too. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix lock in stmmac_set_rx_modeGiuseppe CAVALLARO1-2/+0
When compile with CONFIG_PROVE_LOCKING the following warnings happen: [snip] HARDIRQ-ON-W at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c so the patch just removes the lock protection in the stmmac_set_rx_mode Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Emilio Lopez <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: release tx lock, in case of dma mapping error.Fabrice Gasnier1-0/+1
Add missing spin_unlock when tx frames gets dropped. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix stmmac_tx_avail should be called with TX lockedFabrice Gasnier1-2/+3
stmmac_tx_avail() may lie if used unprotected. It's using cur_tx and dirty_tx index. These index may be already in use by tx_clean when entering xmit routine. So, this should be called locked. This can cause transmit queue to be stuck, with following message: NETDEV WATCHDOG: eth0 (stmmaceth): transmit queue 0 timed out Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05drivers: net: ethernet: xilinx: xilinx_emaclite: revert the original commit ↵Chen Gang1-1/+0
"1db3ddff1602edf2390b7667dcbaa0f71512e3ea" Microblaze is a fpga soft core, it can be customized easily, which may cause many various hardware version strings. So the original fix patch based on hard-coded compatible version strings is not a good idea (although it is correct for current issue). For it, there will be a new solving way soon (which based on the device tree). The original issue is related with qemu, so can only change the hardware version string in qemu for it, then keep the original driver no touch ( qemu is for virtualization which has much easier life than real world). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04drivers: net: xgene: fix: Use separate resourcesIyappan Subramanian2-3/+6
This patch fixes the following kernel crash during SGMII based 1GbE probe. BUG: Bad page state in process swapper/0 pfn:40fe6ad page:ffffffbee37a75d8 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: nonzero _count Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ #7 Call trace: [<ffffffc000087fa0>] dump_backtrace+0x0/0x12c [<ffffffc0000880dc>] show_stack+0x10/0x1c [<ffffffc0004d981c>] dump_stack+0x74/0xc4 [<ffffffc00012fe70>] bad_page+0xd8/0x128 [<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640 [<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834 [<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8 [<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c [<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280 [<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340 [<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50 [<ffffffc00042b454>] net_rx_action+0xc8/0x18c [<ffffffc0000b0880>] __do_softirq+0x114/0x24c [<ffffffc0000b0c34>] irq_exit+0x94/0xc8 [<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4 [<ffffffc000081288>] gic_handle_irq+0x30/0x7c This was due to hardware resource sharing conflict with the firmware. This patch fixes this crash by using resources (descriptor ring, prefetch buffer) that are not shared. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04drivers: net: xgene: Backward compatibility with older firmwareIyappan Subramanian6-5/+38
This patch adds support when used with older firmware (<= 1.13.28). - Added xgene_ring_mgr_init() to check whether ring manager is initialized - Calling xgene_ring_mgr_init() from xgene_port_ops.reset() - To handle errors, changed the return type of xgene_port_ops.reset() Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04Merge tag 'mac80211-for-john-2014-11-04' of ↵John W. Linville1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "This contains another small set of fixes for 3.18, these are all over the place and most of the bugs are old, one even dates back to the original mac80211 we merged into the kernel." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-04Merge tag 'iwlwifi-for-john-2014-11-03' of ↵John W. Linville5-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <egrumbach@gmail.com> says: "I fix here two issues that are related to the firmware loading flow. A user reported that he couldn't load the driver because the rfkill line was pulled up while we were running the calibrations. This was happening while booting the system: systemd was restoring the "disable wifi settings" and that raised an RFKILL interrupt during the calibration. Our driver didn't handle that properly and this is now fixed." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-03sfc: don't BUG_ON efx->max_channels == 0 in probeEdward Cree1-1/+2
efx_ef10_probe() was BUGging out if the BAR2 size was 0. This is unnecessarily violent; instead we should just fail to probe the device. Kept a WARN_ON as this problem indicates a broken or misconfigured NIC. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03macvtap: Fix csum_start when VLAN tags are presentHerbert Xu1-0/+2
When VLAN is in use in macvtap_put_user, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN tags are detected. Fixes: f09e2249c4f5 ("macvtap: restore vlan header on user read") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03net: fec: fix suspend broken on multiple MACs silliconsNimrod Andy1-8/+8
On i.MX6SX sdb platform, there has two same enet MACs, after system up, just eth0 is up, and then do suspend/resume test: [ 50.437967] PM: Syncing filesystems ... done. [ 50.476924] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 50.490093] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done. [ 50.559771] ------------[ cut here ]------------ [ 50.564453] WARNING: CPU: 0 PID: 575 at drivers/clk/clk.c:851 __clk_disable+0x60/0x6c() [ 50.572475] Modules linked in: [ 50.575578] CPU: 0 PID: 575 Comm: sh Not tainted 3.18.0-rc2-next-20141031-00007-gf61135b #21 [ 50.584031] Backtrace: [ 50.586550] [<80011ecc>] (dump_backtrace) from [<8001206c>] (show_stack+0x18/0x1c) [ 50.594136] r6:808a7a54 r5:00000000 r4:00000000 r3:00000000 [ 50.599920] [<80012054>] (show_stack) from [<806ab3c0>] (dump_stack+0x80/0x9c) [ 50.607187] [<806ab340>] (dump_stack) from [<8002a3e8>] (warn_slowpath_common+0x6c/0x8c) [ 50.615294] r5:00000353 r4:00000000 [ 50.618940] [<8002a37c>] (warn_slowpath_common) from [<8002a42c>] (warn_slowpath_null+0x24/0x2c) [ 50.627738] r8:00000000 r7:be144c44 r6:be015600 r5:80070013 r4:be015600 [ 50.634573] [<8002a408>] (warn_slowpath_null) from [<804f8d4c>] (__clk_disable+0x60/0x6c) [ 50.642777] [<804f8cec>] (__clk_disable) from [<804f8e5c>] (clk_disable+0x2c/0x38) [ 50.650359] r4:be015600 r3:00000000 [ 50.654006] [<804f8e30>] (clk_disable) from [<80420ab4>] (fec_enet_clk_enable+0xc4/0x258) [ 50.662196] r5:be3cb620 r4:be3cb000 [ 50.665838] [<804209f0>] (fec_enet_clk_enable) from [<80421178>] (fec_suspend+0x30/0x180) [ 50.674026] r7:be144c44 r6:be144c10 r5:8037f5a4 r4:be3cb000 [ 50.679802] [<80421148>] (fec_suspend) from [<8037f5d8>] (platform_pm_suspend+0x34/0x64) [ 50.687906] r10:00000000 r9:00000000 r8:00000000 r7:be144c44 r6:be144c10 r5:8037f5a4 [ 50.695852] r4:be144c10 r3:80421148 [ 50.699511] [<8037f5a4>] (platform_pm_suspend) from [<8038784c>] (dpm_run_callback.isra.14+0x34/0x6c) [ 50.708764] [<80387818>] (dpm_run_callback.isra.14) from [<80387f00>] (__device_suspend+0x12c/0x2a4) [ 50.717909] r9:8098ec8c r8:80973bec r6:00000002 r5:811c7038 r4:be144c10 [ 50.724746] [<80387dd4>] (__device_suspend) from [<803894fc>] (dpm_suspend+0x64/0x224) [ 50.732675] r8:80973bec r7:be144c10 r6:8098ec24 r5:811c7038 r4:be144cc4 [ 50.739509] [<80389498>] (dpm_suspend) from [<8038999c>] (dpm_suspend_start+0x60/0x68) [ 50.747438] r10:8082fa24 r9:00000000 r8:00000004 r7:00000003 r6:00000000 r5:8116ec80 [ 50.755386] r4:00000002 [ 50.757969] [<8038993c>] (dpm_suspend_start) from [<800679d8>] (suspend_devices_and_enter+0x90/0x3ec) [ 50.767202] r4:00000003 r3:8116eca0 [ 50.770843] [<80067948>] (suspend_devices_and_enter) from [<80067f40>] (pm_suspend+0x20c/0x2a4) [ 50.779553] r8:00000004 r7:00000003 r6:00000000 r5:8116ec8c r4:00000003 [ 50.786394] [<80067d34>] (pm_suspend) from [<80066858>] (state_store+0x70/0xc0) [ 50.793718] r6:8116ec90 r5:00000003 r4:bd88a800 r3:0000006d [ 50.799496] [<800667e8>] (state_store) from [<802b0384>] (kobj_attr_store+0x1c/0x28) [ 50.807251] r10:bd399f78 r8:00000000 r7:bd88a800 r6:bd88a800 r5:00000004 r4:bd085680 [ 50.815219] [<802b0368>] (kobj_attr_store) from [<80153090>] (sysfs_kf_write+0x54/0x58) [ 50.823252] [<8015303c>] (sysfs_kf_write) from [<80151fd8>] (kernfs_fop_write+0xd0/0x194) [ 50.831441] r6:00000004 r5:bd08568c r4:bd085680 r3:8015303c [ 50.837220] [<80151f08>] (kernfs_fop_write) from [<800eddb4>] (vfs_write+0xb8/0x1a8) [ 50.844975] r10:00000000 r9:00000000 r8:00000000 r7:bd399f78 r6:01336408 r5:00000004 [ 50.852924] r4:bc584dc0 [ 50.855505] [<800edcfc>] (vfs_write) from [<800ee0b8>] (SyS_write+0x48/0x88) [ 50.862567] r10:00000000 r8:00000000 r7:01336408 r6:00000004 r5:bc584dc0 r4:bc584dc0 [ 50.870537] [<800ee070>] (SyS_write) from [<8000eb00>] (ret_fast_syscall+0x0/0x48) [ 50.878120] r9:bd398000 r8:8000ecc4 r7:00000004 r6:76f42b48 r5:01336408 r4:00000004 [ 50.885983] ---[ end trace 7545115d752a316a ]--- [ 50.890765] ------------[ cut here ]------------ The root cause is that eth1 is not opened and clock is not enabled, and .suspend() still call .fec_enet_clk_enable() to disable clock. To avoid the broken, let it check network device up status by calling .netif_running() before disable/enable clocks. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03tun: Fix TUN_PKT_STRIP settingHerbert Xu1-4/+8
We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03tun: Fix csum_start with VLAN accelerationHerbert Xu1-7/+9
When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03iwlwifi: fix RFkill while calibratingEmmanuel Grumbach5-4/+23
If the RFkill interrupt fires while we calibrate, it would make the firmware fail and the driver wasn't able to recover. Change the flow so that the driver will kill the firmware in that case. Since we have now two flows that are calling trans_stop_device (the RFkill interrupt and the op_mode_mvm_start function) - we need to better sync this. Use the STATUS_DEVICE_ENABLED in the pcie transport in an atomic way to achieve this. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231 CC: <stable@vger.kernel.org> [3.10+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-01smc91x: retrieve IRQ and trigger flags in a modern wayLinus Walleij1-8/+12
The SMC91x is written to explicitly look up the IRQ resource from the platform device and extract the IRQ and flags, however the platform_get_irq() does additional things, like call of_irq_get() in the device tree case, which will translate the IRQ using the irqdomain and defer the probe if the IRQ host cannot be found. As we're not looking up the resource, this will not retrieve the IRQ flags, but that is better done using irqd_get_trigger_type(), as the trigger is what the driver wants to modify. We take care to preserve the semantics that will make the trigger type provided from the resource override any local specifier. Tested on the Nomadik NHK15 which has its SMC91x IRQ line connected to a STMPE2401 GPIO expander on I2C. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx, ↵Chen Gang1-0/+1
xps-ethernetlite-2.00.b' for QEMU using When use current latest upstream qemu (current version: 2.1.2), need let driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find net device in microblaze qemu. Related QEMU commands under fedora 20: yum install libvirt yum install tunctl tunctl -b ip link set tap0 up brctl addif virbr0 tap0 ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \ -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \ -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \ -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \ -net tap,vlan=0,ifname=tap0,script=no,downscript=no in microblaze qemu bash (guest machine): ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0 ifconfig eth0 up After add this patch, can find the device, and can be used by 'telnetd' (need cross-build busybox with glibc for it), then outside can telnet to it without password. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: systemport: do not crash freeing an unitialized TX ringFlorian Fainelli1-0/+7
Callers of bcm_sysport_init_tx_ring() can currently fail, and will always call bcm_sysport_fini_tx_ring() in a loop ending at the number of TX queues (32) without checking if the TX ring was successfully initialized or not. Update bcm_sysport_fini_tx_ring() to return early and avoid a crash de-referencing ring->cbs if the TX ring was not initialized, since ring->cbs is the last part of the initialization done by bcm_sysport_init_tx_ring() that could fail. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: systemport: fix DMA allocation/freeing sizesFlorian Fainelli1-2/+4
We should not be allocating a single byte of DMA coherent memory, but instead a full-sized struct dma_desc (8 bytes). Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: mvpp2: fix possible memory leakSudip Mukherjee1-9/+18
we are allocating memory using kzalloc for struct mvpp2_prs_entry, but later when we are getting error we were just returning the error value without releasing the memory. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01sunhme: Add DMA mapping error checks.David S. Miller1-5/+57
Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds11-28/+301
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Merge tag 'pm+acpi-3.18-rc3' of ↵Linus Torvalds4-52/+119
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are fixes received after my previous pull request plus one that has been in the works for quite a while, but its previous version caused problems to happen, so it's been deferred till now. Fixed are two recent regressions (MFD enumeration and cpufreq-dt), ACPI EC regression introduced in 3.17, system suspend error code path regression introduced in 3.15, an older bug related to recovery from failing resume from hibernation and a cpufreq-dt driver issue related to operation performance points. Specifics: - Fix a crash on r8a7791/koelsch during resume from system suspend caused by a recent cpufreq-dt commit (Geert Uytterhoeven). - Fix an MFD enumeration problem introduced by a recent commit adding ACPI support to the MFD subsystem that exposed a weakness in the ACPI core causing ACPI enumeration to be applied to all devices associated with one ACPI companion object, although it should be used for one of them only (Mika Westerberg). - Fix an ACPI EC regression introduced during the 3.17 cycle causing some Samsung laptops to misbehave as a result of a workaround targeted at some Acer machines. That includes a revert of a commit that went too far and a quirk for the Acer machines in question. From Lv Zheng. - Fix a regression in the system suspend error code path introduced during the 3.15 cycle that causes it to fail to take errors from asychronous execution of "late" suspend callbacks into account (Imre Deak). - Fix a long-standing bug in the hibernation resume error code path that fails to roll back everything correcty on "freeze" callback errors and leaves some devices in a "suspended" state causing more breakage to happen subsequently (Imre Deak). - Make the cpufreq-dt driver disable operation performance points that are not supported by the VR connected to the CPU voltage plane with acceptable tolerance instead of constantly failing voltage scaling later on (Lucas Stach)" * tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC" cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling ACPI: Use ACPI companion to match only the first physical device cpufreq: cpufreq-dt: disable unsupported OPPs
2014-10-31Merge tag 'pci-v3.18-fixes-1' of ↵Linus Torvalds3-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These changes, intended for v3.18, fix: Sysfs - Fix "enable" filename change (Greg Kroah-Hartman) An unintentional sysfs filename change in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"), which appeared in v3.13, changed "enable" to "enabled", and this changes it back. Old users of "enable" are currently broken and will be helped by this change. Anything that started to use "enabled" after v3.13 will be broken by this change. If necessary, we can add a symlink to make both work, but this patch doesn't do that. PCI device hotplug - Revert duplicate merge (Kamal Mostafa) A mistaken duplicate merge that added a check twice. Nothing's broken; this just removes the unnecessary code. Freescale i.MX6 - Wait for clocks to stabilize after ref_en (Richard Zhu) An i.MX6 clock problem that prevents mx6 nitrogen boards from booting" * tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Rename sysfs 'enabled' file back to 'enable' PCI: imx6: Wait for clocks to stabilize after ref_en Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"
2014-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds93-473/+973
Pull networking fixes from David Miller: "A bit has accumulated, but it's been a week or so since my last batch of post-merge-window fixes, so... 1) Missing module license in netfilter reject module, from Pablo. Lots of people ran into this. 2) Off by one in mac80211 baserate calculation, from Karl Beldan. 3) Fix incorrect return value from ax88179_178a driver's set_mac_addr op, which broke use of it with bonding. From Ian Morgan. 4) Checking of skb_gso_segment()'s return value was not all encompassing, it can return an SKB pointer, a pointer error, or NULL. Fix from Florian Westphal. This is crummy, and longer term will be fixed to just return error pointers or a real SKB. 6) Encapsulation offloads not being handled by skb_gso_transport_seglen(). From Florian Westphal. 7) Fix deadlock in TIPC stack, from Ying Xue. 8) Fix performance regression from using rhashtable for netlink sockets. The problem was the synchronize_net() invoked for every socket destroy. From Thomas Graf. 9) Fix bug in eBPF verifier, and remove the strong dependency of BPF on NET. From Alexei Starovoitov. 10) In qdisc_create(), use the correct interface to allocate ->cpu_bstats, otherwise the u64_stats_sync member isn't initialized properly. From Sabrina Dubroca. 11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter. 12) nf_tables_newchain() was erroneously expecting error pointers from netdev_alloc_pcpu_stats(). It only returna a valid pointer or NULL. From Sabrina Dubroca. 13) Fix use-after-free in _decode_session6(), from Li RongQing. 14) When we set the TX flow hash on a socket, we mistakenly do so before we've nailed down the final source port. Move the setting deeper to fix this. From Sathya Perla. 15) NAPI budget accounting in amd-xgbe driver was counting descriptors instead of full packets, fix from Thomas Lendacky. 16) Fix total_data_buflen calculation in hyperv driver, from Haiyang Zhang. 17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke Mehrtens. 18) Fix mis-use of per-cpu memory in TCP md5 code. The problem is that something that ends up being vmalloc memory can't be passed to the crypto hash routines via scatter-gather lists. From Eric Dumazet. 19) Fix regression in promiscuous mode enabling in cdc-ether, from Olivier Blin. 20) Bucket eviction and frag entry killing can race with eachother, causing an unlink of the object from the wrong list. Fix from Nikolay Aleksandrov. 21) Missing initialization of spinlock in cxgb4 driver, from Anish Bhatt. 22) Do not cache ipv4 routing failures, otherwise if the sysctl for forwarding is subsequently enabled this won't be seen. From Nicolas Cavallari" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits) drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode drivers: net: cpsw: Fix broken loop condition in switch mode net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0 stmmac: pci: set default of the filter bins net: smc91x: Fix gpios for device tree based booting mpls: Allow mpls_gso to be built as module mpls: Fix mpls_gso handler. r8152: stop submitting intr for -EPROTO netfilter: nft_reject_bridge: restrict reject to prerouting and input netfilter: nft_reject_bridge: don't use IP stack to reject traffic netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing drivers/net: macvtap and tun depend on INET drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets drivers/net: Disable UFO through virtio net: skb_fclone_busy() needs to detect orphaned skb gre: Use inner mac length when computing tunnel length mlx4: Avoid leaking steering rules on flow creation error flow net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN ...
2014-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-9/+0
Pull sparc update from David Miller: "Two changes: 1) It makes no sense to execute a VTOC partition table request in the Sun virtual block device driver and fail to load if it doesn't succeed because a) we don't use the result at all and b) it won't succeed if there is an EFI partition on the disk, for example. We read the partition table via the normal means in the block layer anyways, so this is really completely useless, so just remove it. From Dwight Engen. 2) Hook up new bpf system call" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: don't call VD_OP_GET_VTOC sparc: Hook up bpf system call.
2014-10-31Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki2-26/+44
* pm-cpufreq: cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) cpufreq: cpufreq-dt: disable unsupported OPPs * pm-sleep: PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling
2014-10-31Merge branches 'acpi-scan' and 'acpi-ec'Rafael J. Wysocki2-26/+75
* acpi-scan: ACPI: Use ACPI companion to match only the first physical device * acpi-ec: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
2014-10-31Merge tag 'master-2014-10-30' of ↵David S. Miller14-32/+67
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-10-31 Please pull this small batch of spooky fixes intended for the 3.18 stream...boo! Cyril Brulebois adds an rt2x00 device ID. Dan Carpenter provides a one-line masking fix for an ath9k debugfs entry. Larry Finger gives us a package of small rtlwifi fixes which add some bits that were left out of some feature updates that were included in the merge window. Hopefully this isn't a sign that the rtlwifi base is getting too big... Marc Yang brings a fix for a temporary mwifiex stall when doing 11n RX reordering. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch modeLennart Sorensen3-2/+49
The cpsw driver did not support the IFF_ALLMULTI flag which makes dynamic multicast routing not work. Related to this, when enabling IFF_PROMISC in switch mode, all registered multicast addresses are flushed, resulting in only broadcast and unicast traffic being received. A new cpsw_ale_set_allmulti function now scans through the ALE entry table and adds/removes the host port from the unregistered multicast port mask of each vlan entry depending on the state of IFF_ALLMULTI. In promiscious mode, cpsw_ale_set_allmulti is used to force reception of all multicast traffic in addition to the unicast and broadcast traffic. With this change dynamic multicast and promiscious mode both work in switch mode. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 20:34:08 +0000