summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-08-29ssb: Update for Rev. 5 SPROMLarry Finger1-15/+35
Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Add IEEE80211_HW_RX_INCLUDES_FCS to hw flagsSujith6-36/+17
Don't trim the FCS before passing the frame to mac80211, move TSF_TO_TU to core.h and delete more unused macros. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use definition from ieee80211.hSujith1-9/+4
Also, Max RX-ampdu and mpdu-density are ath9k specific. Rename appropriately. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Miscellaneous fixesSujith6-169/+79
This patch removes ath_vap_listen() and dma wrapper macros. Also, Inline abuse is cleaned up and a few typos are fixed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Random cleanupSujith3-94/+83
Remove dead code, add newlines, fix indentation. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove remaining occurences of ath_skb_map functionsSujith4-60/+24
Use direct pci functions instead. Also, use sc_ht_info.tx_chan_width directly and remove ath_cwm_macmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Fix TX control flag use for no ACK and RTS/CTSJouni Malinen1-2/+2
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Assign seq# when mac80211 requests thisJouni Malinen3-0/+27
Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Fix TX status reportingJouni Malinen1-2/+10
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Updated Beacon generation to use mac80211-styleJouni Malinen3-50/+48
This change moves ath9k to use mac80211-generated Beacon frames instead of trying to allocate a single Beacon frame and then update it. In addition, the remaining ath_skb_{map,unmap}_single() wrapper calls are replaced with direct pci_{map,unmap}_single() calls in beacon.c. Power save buffering for multicast/broadcast frames is not yet converted to use mac80211-style (frames to be buffered inside mac80211, not in driver). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Allow AP mode to be enabledJouni Malinen2-5/+26
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Trim struct ath_softcSujith5-61/+31
Add sc_rxflush and sc_noreset as bitfields to sc_flags. Remove a few variables and function prototypes that are unused. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use ah_curchan and remove sc_curchan which is redundantSujith4-15/+12
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use bitfields for sc operationsSujith7-62/+66
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use a single opmode variableSujith8-39/+41
ah_opmode and sc_opmode are redundant. This patch removes sc_opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Unused macros, variablesSujith2-84/+50
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove ar5416hal and assign default values directlySujith1-25/+3
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove a few unnecessary macrosSujith2-13/+4
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use bitfields for buffer typeSujith2-79/+83
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: RX Filter cleanupSujith4-67/+21
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Merge reset functionsSujith5-55/+27
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add MIC on TX and check on RXDavid Kilroy4-16/+229
Use the MIC algorithm from the crypto subsystem. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Process bulk of receive interrupt in a taskletDavid Kilroy2-19/+100
Read the packet data off the hardware and straight into an skb in the interrupt. We have to do this in case we don't process the tasklet in time. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Send association events to userspaceDavid Kilroy1-0/+62
Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add WE-18 ioctls for WPADavid Kilroy3-8/+554
Includes basic plumbing to get the data into firmware, and retrieve it. SIOCxIWGENIE simply record (and return) the IE, and do not act on it. SIOCxIWENCODEEXT, SIOCxIWAUTH and SIOCSIWMLME should be as functional as the driver will support. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Use a macro to define wireless handlersDavid Kilroy1-32/+34
The macro identifiers for the various ioctls required for WPA support are longer than those currently used by the driver. This makes it messy to keep line length below 80 character. By defining a macro to initialise the handler table, we recover the common text. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Split wevent work thread from wevent sendingDavid Kilroy1-10/+14
This allows us to send more wevents from the work thread. We will need to do this to support WPA. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Don't use boolean parameter to record encoding typeDavid Kilroy2-13/+20
For WPA support we need to encode NONE, WEP and TKIP in the encoding parameter. In anticipation of this we need to change the usage away from the current boolean usage. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Use extended Agere scans available on 9.x series firmwaresDavid Kilroy4-44/+448
This provides more information than the standard Agere scan, including the WPA IE. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: address checkpatch typedef warningDavid Kilroy2-9/+10
Just sprinkle the necessary structs around... Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Fix transmit for Agere/Lucent with fw 9.xDavid Kilroy3-15/+46
The tx control word has moved into the 802.11 header area on these firmwares. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Invoke firmware download in main driverDavid Kilroy10-156/+346
Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Extend hermes_dld routines for Agere firmwareDavid Kilroy2-0/+290
Add programming initialisation and termination functions. Add checks to avoid overrunning the firmware image or PDA areas. Extra algorithm to program PDA values using defaults where necessary. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Make firmware download logic more genericDavid Kilroy3-72/+182
Ensure PDA read is terminated. Prevent invalid programming blocks from causing reads outside the firmware image Turn off aux stuff when finished. Option to program in limited block sizes (controlled by macro). Option to read PDA from EEPROM. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Move firmware download functionality into new moduleDavid Kilroy4-274/+385
Move the functionality from spectrum_cs to hermes_dld in preparation for making it more generic and usable by other orinoco drivers. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add function to execute Hermes initialisation commands synchronouslyDavid Kilroy2-37/+60
The current synchronous execution function doesn't work for certain Hermes commands which clear the MAGIC number from SWSUPPORT0. These commands seem to be related to initialisation or programming, for example HERMES_CMD_INIT. Replicate hermes_docmd_wait for commands which clear the MAGIC number from SWSUPPORT0. This version accepts two extra arguments which are passed straight to the firmware. Functionality copied out of hermes_init. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Move EXPORT_SYMBOL declarations next to exported functionDavid Kilroy1-10/+7
Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Specify all three parameters to every Hermes command.David Kilroy1-6/+7
hermes_issue_cmd now takes two more parameters. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Update scan translationDavid Kilroy1-25/+46
Report channel, beacon interval and capabilities. Use WEXT defines instead of magic numbers. State quality stats in dB. Also a few changes to keep line length less than 80. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add ESSID specific scanning for Agere fwDavid Kilroy1-1/+19
Pass the ESSID to the card. This allows 'iwlist eth1 scan essid <essid>' to work, and will help with routers setup not to broadcast the ESSID. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22p54: rename prism54xyz -> p54xyzChristian Lamparter6-47/+47
It's been a long time, but fullmac prism54 driver is still around... I think we should rename every prism54* in order to avoid some confusion about "what is actually what" in the future ;-). Thanks-to: Maxi <maxi@daemonizer.de> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Add module parameter to disable HW cryptoIvo van Doorn2-2/+18
Add a module parameter to rt61 and rt73 to disable HW crypto. The option should only be checked when determining if the SUPPORT_HW_CRYPTO flag should be set or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Move lna_gain calculation to config() callbackIvo van Doorn3-31/+63
We can optimize lna calculation in IRQ context by calculating most of the value during the config() callback when most of the value is actually influenced. This will be required later by rt2800pci and rt2800usb as well, since they need the lna_gain value during config(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22ath5k: set short preamble flag for rxBruno Randolf1-5/+3
set the short preamble flag in ieee80211_rx_status for frames received with a short preamble. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Release rt2x00 2.2.0Ivo van Doorn1-1/+1
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Gather channel information in structureIvo van Doorn13-162/+176
Channel information which is read from EEPROM should be read into an array containing per-channel information. This removes the requirement of multiple arrays and makes the channel handling a bit cleaner and easier to expand. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Implement HW encryption (rt73usb)Ivo van Doorn3-8/+285
rt73usb supports hardware encryption. rt73usb supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Implement HW encryption (rt61pci)Ivo van Doorn3-8/+270
rt61pci supports hardware encryption. rt61pci supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Implement HW encryptionIvo van Doorn11-30/+686
Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22wireless: replace __FUNCTION__ with __func__Harvey Harrison9-25/+25
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-04 02:14:35 +0000