summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-04-17Merge branch 'for-upstream' of ↵David S. Miller20-80/+4936
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-14 Here's the main batch of Bluetooth & 802.15.4 patches for the 4.12 kernel. - Many fixes to 6LoWPAN, in particular for BLE - New CA8210 IEEE 802.15.4 device driver (accounting for most of the lines of code added in this pull request) - Added Nokia Bluetooth (UART) HCI driver - Some serdev & TTY changes that are dependencies for the Nokia driver (with acks from relevant maintainers and an agreement that these come through the bluetooth tree) - Support for new Intel Bluetooth device - Various other minor cleanups/fixes here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: mvneta: fix failed to suspend if WOL is enabledJisheng Zhang1-1/+11
Recently, suspend/resume and WOL support are added into mvneta driver. If we enable WOL, then we get some error as below on Marvell BG4CT platforms during suspend: [ 184.149723] dpm_run_callback(): mdio_bus_suspend+0x0/0x50 returns -16 [ 184.149727] PM: Device f7b62004.mdio-mi:00 failed to suspend: error -16 -16 means -EBUSY, phy_suspend() will return -EBUSY if it finds the device has WOL enabled. We fix this issue by properly setting the netdev's power.can_wakeup and power.wakeup, i.e 1. in mvneta_mdio_probe(), call device_set_wakeup_capable() to set power.can_wakeup if the phy support WOL. 2. in mvneta_ethtool_set_wol(), call device_set_wakeup_enable() to set power.wakeup if WOL has been successfully enabled in phy. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: simplify phy_supported_speeds()Russell King1-10/+4
Simplify the loop in phy_supported_speeds(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: improve phylib correctness for non-autoneg settingsRussell King1-43/+66
phylib has some undesirable behaviour when forcing a link mode through ethtool. phylib uses this code: idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), features); to find an index in the settings table. phy_find_setting() starts at index 0, and scans upwards looking for an exact speed and duplex match. When it doesn't find it, it returns MAX_NUM_SETTINGS - 1, which is 10baseT-Half duplex. phy_find_valid() then scans from the point (and effectively only checks one entry) before bailing out, returning MAX_NUM_SETTINGS - 1. phy_sanitize_settings() then sets ->speed to SPEED_10 and ->duplex to DUPLEX_HALF whether or not 10baseT-Half is supported or not. This goes against all the comments against these functions, and 10baseT-Half may not even be supported by the hardware. Rework these functions, introducing a new method of scanning the table. There are two modes of lookup that phylib wants: exact, and inexact. - in exact mode, we return either an exact match or failure - in inexact mode, we return an exact match if it exists, a match at the highest speed that is not greater than the requested speed (ignoring duplex), or failing that, the lowest supported speed, or failure. The biggest difference is that we always check whether the entry is supported before further consideration, so all unsupported entries are not considered as candidates. This results in arguably saner behaviour, better matches the comments, and is probably what users would expect. This becomes important as ethernet speeds increase, PHYs exist which do not support the 10Mbit speeds, and half-duplex is likely to become obsolete - it's already not even an option on 10Gbit and faster links. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17qede: Add aRFS supportChopra, Manish3-5/+508
This patch adds support for aRFS for TCP and UDP protocols with IPv4/IPv6. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17qed: aRFS infrastructure supportChopra, Manish9-3/+504
This patch adds necessary APIs to interface with qede aRFS support in successive patch. It also reserves separate PTT entry for aRFS, [as being in fastpath flow] for hardware access instead of trying to acquire it at run time from the ptt pool. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17smsc95xx: Add comments to the registers definitionMartin Wetterwald2-214/+280
This chip is used by a lot of embedded devices and also by the Raspberry Pi 1, 2 & 3 which were created to promote the study of computer sciences. Students wanting to learn kernel / network device driver programming through those devices can only rely on the Linux kernel driver source to make their own. This commit adds a lot of comments to the registers definition to expand the register names. Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Martin Wetterwald <martin@wetterwald.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hw/mlx5: Add New bit to check over QP creationErez Shitrit1-0/+1
Add check for bit IB_QP_CREATE_NETIF_QP while creating QP. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: E-switch vport manager is valid for ethernet onlySaeed Mahameed1-2/+8
Currently the driver support only ethernet eswitch, and we want to protect downstream IPoIB netdev from trying to access it in IB link. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX handlerSaeed Mahameed3-0/+81
Implement IPoIB RX SKB handler. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: RX handlers per netdev profileSaeed Mahameed3-13/+24
In order to have different RX handler per profile, fix and refactor the current code to take the rx handler directly from the netdevice profile rather than computing it on runtime as it was done with the switchdev mode representor rx handler. This will also remove the current wrong assumption in mlx5e_alloc_rq code that mlx5e_priv->ppriv is of the type vport_rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Xmit flowSaeed Mahameed4-10/+100
Implement mlx5e's IPoIB SKB transmit using the helper functions provided by mlx5e ethernet tx flow, the only difference in the code between mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill (UD datagram segment) in the TX descriptor (WQE) and it doesn't need to have any vlan handling. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: Xmit flow break downSaeed Mahameed3-89/+119
Break current mlx5e xmit flow into smaller blocks (helper functions) in order to reuse them for IPoIB SKB transmission. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Underlay QPSaeed Mahameed1-2/+124
Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS and TX HW context to perform on IPoIB traffic. Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going through this QP when the ULP IPoIB decides to cleanup. Implement attach/detach mcast RDMA netdev callbacks for later RDMA netdev use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Basic netdev ndos open/closeSaeed Mahameed3-3/+93
Implement open/close of IPoIB netdevice ndos using mlx5e's channels API to manage data path resources (RQs/SQs/CQs). Set IPoIB netdev address on dev_init ndo. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, TX TIS creationSaeed Mahameed3-10/+26
Modify mlx5e tis creation function to accept underlay qp number, which will be needed by IPoIB. Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to create one TIS with the IPoIB underlay qp, for IPoIB TX SQs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RSS flow steering tablesSaeed Mahameed3-3/+54
Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering tables, but IPoIB do not require MAC and VLAN steering tables so the only tables we create in here are: 1. TTC Table (Traffic Type Classifier table for RSS steering) 2. ARFS Table (for accelerated RFS support) Creation of those tables is identical to mlx5e ethernet mode, hence the use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX steering RSS RQTs and TIRsSaeed Mahameed4-44/+83
Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation, All we do here is simply reuse the mlx5e implementation to create direct and indirect (RSS) steering HW objects. For that we just expose mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile callbacks. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Add netdevice profile skeletonSaeed Mahameed6-9/+249
Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c file with empty implementation. Downstream patches will provide the full mlx5 rdma netdevice acceleration support for IPoIB into this new file, by using the mlx5e netdevice profile and new mlx5_channels APIs and infrastructures. Same as already done in mlx5e NIC netdevice and switchdev mode VF representors. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: More generic netdev management APISaeed Mahameed3-91/+96
In preparation for mlx5e RDMA net_device support, here we generalize mlx5e_attach/detach in a way that those functions will be agnostic to link type. For that we move ethernet specific NIC net device logic out of those functions into {nic,rep}_{enable/disable} mlx5e NIC and representor profiles callbacks. Also some of the logic was moved only to NIC profile since it is not right to have this logic for representor net device (e.g. set port MTU). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Enable flow-steering for IB linkErez Shitrit2-8/+6
Get the relevant capabilities if supports ipoib_enhanced_offloads and init the flow steering table accordingly. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Refactor create flow table method to accept underlay QPErez Shitrit7-46/+103
IB flow tables need the underlay qp to perform flow steering. Here we change the API of the flow tables creation to accept the underlay QP number as a parameter in order to support IB (IPoIB) flow steering. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Exclude non-TCP port numbers from vRSS hashingHaiyang Zhang1-1/+31
Azure hosts are not supporting non-TCP port numbers in vRSS hashing for now. For example, UDP packet loss rate will be high if port numbers are also included in vRSS hash. So, we created this patch to use only IP numbers for hashing in non-TCP traffic. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Fix the queue index computation in forwarding caseHaiyang Zhang2-15/+31
If the outgoing skb has a RX queue mapping available, we use the queue number directly, other than put it through Send Indirection Table. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller105-758/+1288
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a small update to xpad driver to recognize yet another gamepad, and another change making sure userio.h is exported" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for Razer Wildcat gamepad uapi: add missing install of userio.h
2017-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-16/+29
Pull networking fixes from David Miller: "Things seem to be settling down as far as networking is concerned, let's hope this trend continues... 1) Add iov_iter_revert() and use it to fix the behavior of skb_copy_datagram_msg() et al., from Al Viro. 2) Fix the protocol used in the synthetic SKB we cons up for the purposes of doing a simulated route lookup for RTM_GETROUTE requests. From Florian Larysch. 3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong Wang. 4) Don't call netdev_change_features with the team lock held, from Xin Long. 5) Revert TCP F-RTO extension to catch more spurious timeouts because it interacts very badly with some middle-boxes. From Yuchung Cheng. 6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from Guillaume Nault. 7) ctnetlink uses bit positions where it should be using bit masks, fix from Liping Zhang. 8) Missing RCU locking in netfilter helper code, from Gao Feng. 9) Avoid double frees and use-after-frees in tcp_disconnect(), from Eric Dumazet. 10) Don't do a changelink before we register the netdevice in bridging, from Ido Schimmel. 11) Lock the ipv6 device address list properly, from Rabin Vincent" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage netfilter: nft_hash: do not dump the auto generated seed drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201 ipv6: Fix idev->addr_list corruption net: xdp: don't export dev_change_xdp_fd() bridge: netlink: register netdevice before executing changelink bridge: implement missing ndo_uninit() bpf: reference may_access_skb() from __bpf_prog_run() tcp: clear saved_syn in tcp_disconnect() netfilter: nf_ct_expect: use proper RCU list traversal/update APIs netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL netfilter: make it safer during the inet6_dev->addr_list traversal netfilter: ctnetlink: make it safer when checking the ct helper name netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find netfilter: ctnetlink: using bit to represent the ct event netfilter: xt_TCPMSS: add more sanity tests on tcph->doff net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb l2tp: don't mask errors in pppol2tp_getsockopt() l2tp: don't mask errors in pppol2tp_setsockopt() tcp: restrict F-RTO to work-around broken middle-boxes ...
2017-04-14Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "The irq department provides: - two fixes for the CPU affinity spread infrastructure to prevent unbalanced spreading in corner cases which leads to horrible performance, because interrupts are rather aggregated than spread - add a missing spinlock initializer in the imx-gpcv2 init code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Fix spinlock initialization irq/affinity: Fix extra vecs calculation irq/affinity: Fix CPU spread for unbalanced nodes
2017-04-14Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds2-3/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "Three fixes from EFI land: - prevent accessing a Graphic Output Device (GOP) which the kernel does not know to handle - prevent PCI reconfiguration to modify a BAR which covers the framebuffer because that's already in use through the EFI GOP interface - avoid reserving EFI runtime regions as this results in bogus memory mappings" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't try to reserve runtime regions efi/fb: Avoid reconfiguration of BAR that covers the framebuffer efi/libstub: Skip GOP with PIXEL_BLT_ONLY format
2017-04-14Merge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linuxLinus Torvalds3-25/+18
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - fix probing time checks in omapfb driver (regression fix) - fix optional VBAT support in ssd1307fb driver (regression fix) - fix connecting to backend in xen-fbfront driver * tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux: fbdev: omapfb: delete check_required_callbacks() xen, fbfront: fix connecting to backend fbdev/ssd1307fb: fix optional VBAT support
2017-04-14Merge tag 'pm-4.11-rc7' of ↵Linus Torvalds1-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a cpufreq core regression related to CPU online/offline and several issues in the turbostat and cpupower utilities. Specifics: - Allow CPUs to be put back online even if the cpufreq driver is unable to work with them (eg. due to missing information from platform firmware), which was the previous behavior expected by users, but changed in the 4.9 time frame (Chen Yu). - Fix a few minor issues in the turbostat utility, introduced mostly during the recent update of it (Len Brown, Doug Smythies). - Fix a cpupower utility bug causing it to report incorrect values for turbo frequencies in some cases (Ben Hutchings)" * tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores cpufreq: Bring CPUs up even if cpufreq_online() failed tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing
2017-04-14Merge tag 'acpi-4.11-rc7' of ↵Linus Torvalds2-19/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a recent ACPICA commit that turned out to be problematic and fix a device enumeration breakage from the 4.8 cycle. Specifics: - Revert a recent ACPICA commit targeted at catching firmware bugs which promptly did that and caused functional problems to appear (Rafael Wysocki). - Fix a device enumeration problem introduced in the 4.8 time frame which caused the ACPI docking station driver to report incorrect status via sysfs among other things (Rafael Wysocki)" * tag 'acpi-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Resources: Not a valid resource if buffer length too long" ACPI / scan: Set the visited flag for all enumerated devices
2017-04-14Merge tag 'devmem-v4.11-rc7' of ↵Linus Torvalds1-30/+52
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CONFIG_STRICT_DEVMEM fix from Kees Cook: "Fixes /dev/mem to read back zeros for System RAM areas in the 1MB exception area on x86 to avoid exposing RAM or tripping hardened usercopy" * tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: Tighten x86 /dev/mem with zeroing reads
2017-04-14Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds7-171/+320
Pull virtio fixes from Michael S. Tsirkin: "virtio oops fixes The virtio pci rework using shared interrupts caused a lot of issues. We tried to fix them but run out of time. Revert for now, and revisit the issue for the next kernel. Luckily we are able to do this without loosing automatic interrupt NUMA affinity which was the main motivator for the rework" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-pci: Remove affinity hint before freeing the interrupt Revert "virtio_pci: remove struct virtio_pci_vq_info" Revert "virtio_pci: use shared interrupts for virtqueues" Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev" Revert "virtio_pci: simplify MSI-X setup" Revert "virtio_pci: fix out of bound access for msix_names" MAINTAINERS: fix virtio file pattern virtio_console: fix uninitialized variable use virtio_net: clear MTU when out of range virtio: allow drivers to validate features virtio_net: enable big packets for large MTU values
2017-04-14fbdev: omapfb: delete check_required_callbacks()Aaro Koskinen1-15/+0
Commit 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") made panel callbacks optional but forgot to update check_required_callbacks(). As a result many (all?) OMAP systems using omapfb will crash at boot. Fix by deleting the whole function. Fixes: 561eb9d09a93 ("fbdev: omap/lcd: Make callbacks optional") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-04-14Merge branches 'acpi-scan-fixes' and 'acpica-fixes'Rafael J. Wysocki1-12/+5
* acpi-scan-fixes: ACPI / scan: Set the visited flag for all enumerated devices * acpica-fixes: Revert "ACPICA: Resources: Not a valid resource if buffer length too long"
2017-04-14irqchip/irq-imx-gpcv2: Fix spinlock initializationTyler Baker1-0/+2
The raw_spinlock in the IMX GPCV2 interupt chip is not initialized before usage. That results in a lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Add the missing raw_spin_lock_init() to the setup code. Fixes: e324c4dc4a59 ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources") Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: shawnguo@kernel.org Cc: andrew.smirnov@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170413222731.5917-1-tyler.baker@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-13zram: do not use copy_page with non-page aligned addressMinchan Kim1-2/+2
The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-13zram: fix operator precedence to get offsetMinchan Kim1-1/+1
In zram_rw_page, the logic to get offset is wrong by operator precedence (i.e., "<<" is higher than "&"). With wrong offset, zram can corrupt the user's data. This patch fixes it. Fixes: 8c7f01025 ("zram: implement rw_page operation of zram") Link: http://lkml.kernel.org/r/1492042622-12074-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg1-1/+2
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg14-24/+31
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: extended ACK reportingJohannes Berg2-3/+4
Add the base infrastructure and UAPI for netlink extended ACK reporting. All "manual" calls to netlink_ack() pass NULL for now and thus don't get extended ACK reporting. Big thanks goes to Pablo Neira Ayuso for not only bringing up the whole topic at netconf (again) but also coming up with the nlattr passing trick and various other ideas. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13bonding: handle link transition from FAIL to UP correctlyMahesh Bandewar1-1/+2
When link transitions from LINK_FAIL to LINK_UP, the commit phase is not called. This leads to an erroneous state causing slave-link state to get stuck in "going down" state while its speed and duplex are perfectly fine. This issue is a side-effect of splitting link-set into propose and commit phases introduced by de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") This patch fixes these issues by calling commit phase whenever link state change is proposed. Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: dwc-xlgmac: add the initial ethtool supportJie Deng6-4/+312
It is necessary to provide ethtool support for displaying and modifying parameters of dwc-xlgmac. Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13bluetooth: hci_uart: add LL protocol serdev driver supportRob Herring1-1/+261
Turns out that the LL protocol and the TI-ST are the same thing AFAICT. The TI-ST adds firmware loading, GPIO control, and shared access for NFC, FM radio, etc. For now, we're only implementing what is needed for BT. This mirrors other drivers like BCM and Intel, but uses the new serdev bus. The firmware loading is greatly simplified by using existing infrastructure to send commands. It may be a bit slower than the original code using synchronous functions, but the real bottleneck is likely doing firmware load at 115.2kbps. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13bluetooth: hci_uart: remove unused hci_uart_init_ttyRob Herring2-20/+0
There are no users of hci_uart_init_tty, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel7-12/+17
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cxgb4: save tid while creating server filterGanesh Goudar1-0/+4
Save the filter tid while creating the server filter, which is used later to retrieve the corresponding filter instance while handling the filter reply. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201Daniele Palmas1-1/+1
Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13Revert "ACPICA: Resources: Not a valid resource if buffer length too long"Rafael J. Wysocki1-12/+5
Revert commit 57707a9a7780 (ACPICA: Resources: Not a valid resource if buffer length too long) as it is reported to prevent the TPM module from loading on Lenovo X60 with Coreboot. It also causes new confusing warnings to show up in the kernel log. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195311 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-03 16:32:31 +0000