summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-09-18gpio: pxa: using for_each_set_bit to simplify the codeWei Yongjun1-3/+1
Using for_each_set_bit() to simplify the code. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-18gpio_msm: using for_each_set_bit to simplify the codeWei Yongjun1-3/+1
Using for_each_set_bit() to simplify the code. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-12gpio: Enable the tc3298x GPIO expander driver for Device TreeLee Jones1-9/+17
Here we provide a means to probe and extract vital information from Device Tree when booting with it enabled. Without this patch sub-devices wouldn't be able to reference the tc3589x-gpio expander from Device Tree. CC: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-12gpio: Provide the tc3589x GPIO expander driver with an IRQ domainLee Jones1-28/+70
In preparation for Device Tree enablement all IRQ controllers should control their own IRQ domain. This patch provides just that for the tc3589x GPIO expander. CC: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-12gpio: pcf857x: fixup smatch WARNINGKuninori Morimoto1-3/+3
6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added new smatch warnings drivers/gpio/gpio-pcf857x.c:288 pcf857x_probe() error: we previously \ assumed 'pdata' could be null (see line 277) drivers/gpio/gpio-pcf857x.c:364 pcf857x_probe() warn: variable dereferenced\ before check 'pdata' (see line 292) drivers/gpio/gpio-pcf857x.c:421 pcf857x_remove() error: we previously\ assumed 'pdata' could be null (see line 410) This patch fixes it Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-11gpio: 74x164: Add support for the daisy-chainingMaxime Ripard1-7/+61
The shift registers have an output pin that, when enabled, propagates the values of its internal register to the pins. If another value comes to the register while the output pin is disabled, this new value will makae the older shift into the next register in the chain. This patch adds support for daisy-chaining the registers, using the regular SPI chip select mechanism to manage the output pin, and the registers-number dt property to set the number of chained registers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-07gpio: 74x164: Add device tree supportMaxime Ripard1-0/+7
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Florian Fainelli <florian@openwrt.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-07gpio: 74x164: Use dynamic gpio number assignment if no pdata is presentMaxime Ripard1-7/+6
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-07gpio: 74x164: Use devm_kzallocMaxime Ripard1-5/+3
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Florian Fainelli <florian@openwrt.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-07gpio: 74x164: Use module_spi_driver boiler plate functionMaxime Ripard1-12/+1
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Florian Fainelli <florian@openwrt.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-06gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate placesAxel Lin1-18/+6
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-06gpio: em: Use irq_data_get_irq_chip_data() at appropriate placesAxel Lin1-9/+3
Then we can remove irq_to_priv() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-04gpio: wm8350: Convert to use devm_kzalloc APIAxel Lin1-14/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-04gpio: wm831x: Convert to use devm_kzalloc APIAxel Lin1-14/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-04gpio: adp5588: Use module_i2c_driverAxel Lin1-13/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-04gpio: Use DEFINE_PCI_DEVICE_TABLE macroAxel Lin2-2/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: tps65912: Convert to use devm_kzalloc APIAxel Lin1-13/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: da9052: Convert to use devm_kzalloc APIAxel Lin1-12/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01drivers/gpio/gpio-pxa.c: use clk_prepare_enable and clk_disable_unprepareJulia Lawall1-8/+1
Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: davinci: preparation for switch to common clock frameworkMurali Karicheri1-1/+1
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: Remove broken mark for da9052 gpio driverAxel Lin1-1/+1
The fix for MFD part is merged so remove the broken mark for da9052 gpio driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: mc9s08dz60: Use devm_kzalloc APIAxel Lin1-18/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-23gpio: pcf857x: enable gpio_to_irq() supportKuninori Morimoto1-0/+122
pcf857x chip has some pins, but interrupt pin is only 1 pin. And gpiolib requests 1 interrupt per 1 gpio pin. Thus, this patch added demuxed irq to pcf857x driver, and enabled gpio_to_irq(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17gpio: gpio-pch: Use spinlock for register access protectionAxel Lin1-12/+10
gpio_chip.can_sleep is 0, but current code uses mutex in pch_gpio_set pch_gpio_get and pch_gpio_direction_input functions. Thus those functions are not callable from interrupt context. This patch converts mutex into spinlock. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17gpio: gpio-ml-ioh: Use spinlock for register access protectionAxel Lin1-10/+10
gpio_chip.can_sleep is 0, but current code uses mutex in ioh_gpio_set, ioh_gpio_get and ioh_gpio_direction_input functions. Thus those functions are not callable from interrupt context. This patch converts mutex into spinlock. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17gpiolib: Use seq_file's iterator interfaceThierry Reding1-28/+74
When dumping a collection of items via seq_file, it is recommended to use the iterator interface. For the gpiolib debugfs interface this can be done to dump each GPIO chip in turn. Note that for gpiolib this is a little cumbersome because it does not provide a list of registered GPIO chips and the only way to iterate is over each GPIO individually. Once a chip is found, the number of GPIOs it provides can be skipped as a small optimization. This patch was requested by Arnd Bergmann here: http://article.gmane.org/gmane.linux.ports.tegra/3535 Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-16Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds1-4/+23
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
2012-08-16Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-12/+42
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
2012-08-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-51/+88
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie6-8/+45
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie5-43/+43
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson1-18/+23
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter1-7/+7
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds42-239/+511
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann1-2/+2
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14drm/nv86/fifo: suspend fixMaxim Levitsky1-0/+9
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau: disable copy engine on NVAFHenrik Rydberg1-1/+0
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst1-1/+1
Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau/aux: mask off higher bits of auxch index in i2c table entryBen Skeggs1-1/+1
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller1-1/+1
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-08-13drm/i915: ensure i2c adapter is all set before adding itJani Nikula1-3/+4
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov1-1/+1
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák9-7/+80
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: add MSAA texture support for r600-evergreenMarek Olšák3-2/+15
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: reorder code in r600_check_texture_resourceMarek Olšák1-26/+26
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fence virtual address and free it once idle v4Jerome Glisse5-21/+55
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix some missing parens in asic macrosAlex Deucher1-5/+5
Better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix ordering in pll picking on dce4+Alex Deucher1-4/+4
No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse3-76/+2
It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 02:41:44 +0000