summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24hwmon: (lm90) Prevent integer underflows of temperature calculationsDmitry Osipenko1-2/+11
The min/max/crit and all other temperature values that are passed to the driver are unlimited and value that is close to INT_MIN results in integer underflow of the temperature calculations made by the driver for LM99 sensor. Temperature hysteresis is among those values that need to be limited, but limiting of hysteresis is independent from the sensor version. Add the missing limits. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210623042231.16008-2-digetx@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Disable interrupt on suspendDmitry Osipenko1-0/+25
I2C accesses are prohibited and will error out after suspending of the I2C controller, hence we need to ensure that interrupt won't fire on suspend when it's too late. Disable interrupt across suspend/resume. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Unmask hardware interruptDmitry Osipenko1-0/+7
The ALERT interrupt is enabled by default after power-on, but it could be masked by bootloader. For example this is the case on Acer A500 tablet device. Unmask the hardware interrupt if interrupt is provided. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Use hwmon_notify_event()Dmitry Osipenko1-11/+33
Use hwmon_notify_event() to notify userspace and thermal core about temperature changes. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Don't override interrupt trigger typeDmitry Osipenko1-2/+1
The lm90 driver sets interrupt trigger type to level-low. This type is not suitable for sensors like NCT1008 that don't deassert interrupt line until temperature is back to normal, resulting in interrupt storm. The appropriate trigger type should come from OF device description and currently it's overridden by the driver's trigger type. Don't specify the trigger type in the driver code, letting interrupt core to use the device-specific trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-18hwmon: (pmbus/dps920ab) Delete some dead codeDan Carpenter1-2/+0
The debugfs_create_dir() function returns error pointers, it doesn't return NULL. But debugfs functions don't need to be checked in normal situations and we can just delete this code. Fixes: 1f442e213ce5 ("hwmon: (pmbus) Add driver for Delta DPS-920AB PSU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YMyjmR54ErLtc1sH@mwanda Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (ntc_thermistor) Drop unused headers.Jonathan Cameron1-4/+0
The IIO usage in this driver is purely consumer so it should only be including linux/iio/consumer.h Whilst here drop pm_runtime.h as there is no runtime power management in the driver. Found using include-what-you-use and manual inspection of the suggestions. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210611142257.103094-1-jic23@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add driver for Delta DPS-920AB PSURobert Marko3-0/+218
This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820Erik Rosen3-0/+243
Add hardware monitoring support for Flex power interface modules PIM4006, PIM4328 and PIM4820. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Allow phase function even if it's not on pageErik Rosen1-8/+8
Allow the use of a phase function even if it does not exist on the associated page. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for reading direct mode coefficientsErik Rosen1-0/+116
Add support for reading and decoding direct format coefficients to the PMBus core driver. If the new flag PMBUS_USE_COEFFICIENTS_CMD is set, the driver will use the COEFFICIENTS register together with the information in the pmbus_sensor_attr structs to initialize relevant coefficients for the direct mode format. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> [groeck: Initialize ret with -EINVAL in pmbus_init_coefficients()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECTErik Rosen1-3/+5
Some PMBus chips respond with invalid data when reading the WRITE_PROTECT register. For such chips, this flag should be set so that the PMBus core driver doesn't use the WRITE_PROTECT command to determine its behavior. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus_core) Check adapter PEC supportMadhava Reddy Siddareddygari1-3/+6
Currently, for Packet Error Checking (PEC) only the controller is checked for support. This causes problems on the cisco-8000 platform where a SMBUS transaction errors are observed. This is because PEC has to be enabled only if both controller and adapter support it. Added code to check PEC capability for adapter and enable it only if both controller and adapter supports PEC. Signed-off-by: Madhava Reddy Siddareddygari <msiddare@cisco.com> [Upstream from SONiC https://github.com/Azure/sonic-linux-kernel/pull/215] Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20210605052700.541455-1-pmenzel@molgen.mpg.de [groeck: Dropped unnecessary continuation line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (ina3221) use CVRF only for single-shot conversionNinad Malwade1-11/+11
As per current logic the wait time per conversion is arouns 430ms for 512 samples and around 860ms for 1024 samples for 3 channels considering 140us as the bus voltage and shunt voltage sampling conversion time. This waiting time is a lot for the continuous mode and even for the single shot mode. For continuous mode when moving average is considered the waiting for CVRF bit is not required and the data from the previous conversion is sufficuent. As mentioned in the datasheet the conversion ready bit is provided to help coordinate single-shot conversions, we can restrict the use to single-shot mode only. Also, the conversion time is for the averaged samples, the wait time for the polling can omit the number of samples consideration. Signed-off-by: Ninad Malwade <nmalwade@nvidia.com> Link: https://lore.kernel.org/r/1622789683-30931-1-git-send-email-nmalwade@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (max31790) Detect and report zero fan speedGuenter Roeck1-1/+6
If a fan is not running or not connected, of if fan monitoring is disabled, the fan count register returns a fixed value of 0xffe0. So far this is then translated to a RPM value larger than 0. Since this is misleading and does not really make much sense, report a fan RPM of 0 in this situation. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-7-linux@roeck-us.net
2021-06-17hwmon: (max31790) Clear fan fault after reporting itGuenter Roeck1-1/+15
Fault bits in MAX31790 are sticky and have to be cleared explicitly. A write operation into either the 'Target Duty Cycle' register or the 'Target Count' register is necessary to clear a fault. At the same time, we can never clear cached fault status values before reading them because the companion fault status for any given fan is cleared as well when clearing a fault. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-6-linux@roeck-us.net
2021-06-17hwmon: (max31790) Fix pwmX_enable attributesGuenter Roeck1-15/+26
pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-06-17hwmon: (max31790) Report correct current pwm duty cyclesGuenter Roeck1-3/+3
The MAX31790 has two sets of registers for pwm duty cycles, one to request a duty cycle and one to read the actual current duty cycle. Both do not have to be the same. When reporting the pwm duty cycle to the user, the actual pwm duty cycle from pwm duty cycle registers needs to be reported. When setting it, the pwm target duty cycle needs to be written. Since we don't know the actual pwm duty cycle after a target pwm duty cycle has been written, set the valid flag to false to indicate that actual pwm duty cycle should be read from the chip instead of using cached values. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@ceesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
2021-06-17hwmon: (max31790) Fix fan speed reporting for fan7..12Guenter Roeck1-1/+1
Fans 7..12 do not have their own set of configuration registers. So far the code ignored that and read beyond the end of the configuration register range to get the tachometer period. This resulted in more or less random fan speed values for those fans. The datasheet is quite vague when it comes to defining the tachometer period for fans 7..12. Experiments confirm that the period is the same for both fans associated with a given set of configuration registers. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net
2021-06-17hwmon: (sht4x) Fix sht4x_read_values return valueJoe Perches1-50/+45
Kernel doc for sht4x_read_values() shows 0 on success, 1 on failure but the return value on success is actually always positive as it is set to SHT4X_RESPONSE_LENGTH by a successful call to i2c_master_recv(). Miscellanea: o Update the kernel doc for sht4x_read_values to 0 for success or -ERRNO o Remove incorrectly used kernel doc /** header for other _read functions o Typo fix succesfull->successful o Reverse a test to unindent a block and use goto unlock o Declare cmd[SHT4X_CMD_LEN] rather than cmd[] At least for gcc 10.2, object size is reduced a tiny bit. $ size drivers/hwmon/sht4x.o* text data bss dec hex filename 1752 404 256 2412 96c drivers/hwmon/sht4x.o.new 1825 404 256 2485 9b5 drivers/hwmon/sht4x.o.old Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/60eedce497137eb34448c0c77e01ec9d9c972ad7.camel@perches.com Reviewed by: Navin Sankar Velliangiri <navin@linumiz.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: Add sht4x Temperature and Humidity Sensor DriverNavin Sankar Velliangiri3-0/+313
This patch adds a hwmon driver for the SHT4x Temperature and Humidity sensor. Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> [groeck: dropped unnecessary empty line and continuation lines] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (adm1275) enable adm1272 temperature reportingChu Lin1-8/+6
adm1272 supports temperature reporting but it is disabled by default. Tested: ls temp1_* temp1_crit temp1_highest temp1_max temp1_crit_alarm temp1_input temp1_max_alarm cat temp1_input 26642 Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20210512171043.2433694-1-linchuyuan@google.com [groeck: Updated subject to reflect correct driver] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controllerVadim Pasternak3-0/+418
Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a digital, multi-phase, pulse-width modulation controller. This device supports: - One power rail. - Programmable Multi-Phase up to 10 Phases. - PWM-VID Interface - One pages 0 for telemetry. - Programmable pins for PMBus Address. - Built-In EEPROM to Store Custom Configurations. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com [groeck: Add MODULE_IMPORT_NS] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Increase maximum number of phases per pageVadim Pasternak1-1/+1
Increase maximum number of phases from 8 to 10 to support multi-phase devices allowing up to 10 phases. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210511055619.118104-2-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (bt1-pvt) Remove redundant error printing in pvt_request_regs()Zhen Lei1-3/+1
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210511091843.4561-1-thunder.leizhen@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for additional Flex BMR converters to pmbusErik Rosen2-5/+21
Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491 and BMR492 to the pmbus driver Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-4-erik.rosen@metormote.com [groeck: Fixed minor whitespace error] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add new flag PMBUS_READ_STATUS_AFTER_FAILED_CHECKErik Rosen1-0/+2
Some PMBus chips end up in an undefined state when trying to read an unsupported register. For such chips, it is necessary to reset the chip pmbus controller to a known state after a failed register check. This can be done by reading a known register. By setting this flag the driver will try to read the STATUS register after each failed register check. This read may fail, but it will put the chip into a known state. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Simplify sch56xx_device_addArmin Wolf1-23/+4
Use platform_device_register_simple() instead of manually calling platform_device_alloc()/platform_device_add(). Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Use helper functionArmin Wolf1-4/+3
Use watchdog_set_nowayout() to process param setting and change param type to bool. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Use strscpyArmin Wolf1-2/+1
strlcpy is considered deprecated. Replace it with strscpy. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-3-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx) Use devres functions for watchdogArmin Wolf4-43/+16
Use devm_kzalloc()/devm_watchdog_register() for watchdog registration since it allows us to remove the sch56xx_watchdog_data struct from the drivers own data structs. Remove sch56xx_watchdog_unregister since devres takes care of that now. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> [groeck: Dropped unnecessary return; at end of void function] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm70) Use SPI_MODE_X_MASKAndy Shevchenko1-1/+1
Use SPI_MODE_X_MASK instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210510141331.56736-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (max31722) Remove non-standard ACPI device IDsGuenter Roeck1-9/+0
Valid Maxim Integrated ACPI device IDs would start with MXIM, not with MAX1. On top of that, ACPI device IDs reflecting chip names are almost always invalid. Remove the invalid ACPI IDs. Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"Guenter Roeck1-25/+1
This reverts commit b58bd4c6dfe709646ed9efcbba2a70643f9bc873. None of the ACPI IDs introduced with the reverted patch is a valid ACPI device ID. Any ACPI users of this driver are advised to use PRP0001 and a devicetree-compatible device identification. Fixes: b58bd4c6dfe7 ("hwmon: (lm70) Add support for ACPI") Cc: Andrej Picej <andpicej@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm75) Add TI TMP1075 supportRobert Marko1-0/+13
TI TMP1075 is a LM75 compatible sensor, so lets add support for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210429121150.106804-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/zl6100) Add support for ZLS1003, ZLS4009 and ZL8802Erik Rosen1-14/+80
Add support for Renesas ZL8802 Dual Channel/Dual Phase PMBus DC/DC Digital Controller as well as ZLS1003 and ZLS4009 custom DC/DC controller chips. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210423153329.33457-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/bpa-rs600) Handle Vin readings >= 256VChris Packham1-0/+29
The BPA-RS600 doesn't follow the PMBus spec for linear data. Specifically it treats the mantissa as an unsigned 11-bit value instead of a two's complement 11-bit value. At this point it's unclear whether this only affects Vin or if Pin/Pout1 are affected as well. Erring on the side of caution only Vin is dealt with here. Fixes: 15b2703e5e02 ("hwmon: (pmbus) Add driver for BluTek BPA-RS600") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210616034218.25821-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-13Merge tag 'scsi-fixes' of ↵Linus Torvalds1-21/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four reasonably small fixes to the core for scsi host allocation failure paths. The root problem is that we're not freeing the memory allocated by dev_set_name(), which involves a rejig of may of the free on error paths to do put_device() instead of kfree which, in turn, has several other knock on ramifications and inspection turned up a few other lurking bugs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Only put parent device if host state differs from SHOST_CREATED scsi: core: Put .shost_dev in failure path if host state changes to RUNNING scsi: core: Fix failure handling of scsi_add_host_with_dma() scsi: core: Fix error handling of scsi_host_alloc()
2021-06-12Merge tag 'usb-5.13-rc6' of ↵Linus Torvalds35-126/+258
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of tiny USB fixes for 5.13-rc6. There are more than I would normally like, but there's been a bunch of people banging on the gadget and dwc3 and typec code recently for I think an Android release, which has resulted in a number of small fixes. It's nice to see companies send fixes upstream for this type of work, a notable change from years ago. Anyway, fixes in here are: - usb-serial device id updates - usb-serial cp210x driver fixes for broken firmware versions - typec fixes for crazy charging devices and other reported problems - dwc3 fixes for reported problems found - gadget fixes for reported problems - tiny xhci fixes - other small fixes for reported issues. - revert of a problem fix found by linux-next testing All of these have passed 0-day and linux-next testing with no reported problems (the revert for the found linux-next build problem included)" * tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits) Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs" usb: typec: mux: Fix copy-paste mistake in typec_mux_match usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path usb: gadget: fsl: Re-enable driver for ARM SoCs usb: typec: wcove: Use LE to CPU conversion when accessing msg->header USB: serial: cp210x: fix CP2102N-A01 modem control USB: serial: cp210x: fix alternate function for CP2102N QFN20 usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() usb: dwc3: ep0: fix NULL pointer exception usb: gadget: eem: fix wrong eem header operation usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put() usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource() usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe() usb: typec: tcpm: Do not finish VDM AMS for retrying Responses usb: fix various gadget panics on 10gbps cabling usb: fix various gadgets null ptr deref on 10gbps cabling. usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir usb: f_ncm: only first packet of aggregate needs to start timer USB: f_ncm: ncm_bitrate (speed) is unsigned MAINTAINERS: usb: add entry for isp1760 ...
2021-06-12Merge tag 'tty-5.13-rc6' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "A single 8250_exar serial driver fix for a reported problem with a change that happened in 5.13-rc1. It has been in linux-next with no reported problems" * tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_exar: Avoid NULL pointer dereference at ->exit()
2021-06-12Merge tag 'staging-5.13-rc6' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Two tiny staging driver fixes: - ralink-gdma driver authorship information fixed up - rtl8723bs driver fix for reported regression Both have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ralink-gdma: Remove incorrect author information staging: rtl8723bs: Fix uninitialized variables
2021-06-12Merge tag 'char-misc-5.13-rc6' of ↵Linus Torvalds16-20/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
2021-06-12Merge tag 'pinctrl-v5.13-2' of ↵Linus Torvalds7-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix some documentation warnings for Allwinner - Fix duplicated GPIO groups on Qualcomm SDX55 - Fix a double enablement bug in the Ralink driver - Fix the Qualcomm SC8180x Kconfig so the driver can be selected. * tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Make it possible to select SC8180x TLMM pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled pinctrl: qcom: Fix duplication in gpio_groups pinctrl: aspeed: Fix minor documentation error
2021-06-12Merge tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-blockLinus Torvalds7-51/+15
Pull block fixes from Jens Axboe: "A few fixes that should go into 5.13: - Fix a regression deadlock introduced in this release between open and remove of a bdev (Christoph) - Fix an async_xor md regression in this release (Xiao) - Fix bcache oversized read issue (Coly)" * tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block: block: loop: fix deadlock between open and remove async_xor: check src_offs is not NULL before updating it bcache: avoid oversized read request in cache missing code path bcache: remove bcache device self-defined readahead
2021-06-11Merge tag 'gpio-fixes-for-v5.13-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "Fix a shift-out-of-bounds error in gpio-wcd934x" * tag 'gpio-fixes-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: wcd934x: Fix shift-out-of-bounds error
2021-06-11Merge tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds19-79/+232
Pull drm fixes from Dave Airlie: "Another week of fixes, nothing too crazy, but a few all over the place. Two locking fixes in the core/ttm area, a couple of small driver fixes (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes each, mostly for smaller things, though the msm has a DSI fix for a black screen. I haven't seen any intel fixes this week so they may have a few that may or may not wait for next week. drm: - auth locking fix ttm: - locking fix amdgpu: - Use kvzmalloc in amdgu_bo_create - Use drm_dbg_kms for reporting failure to get a GEM FB - Fix some register offsets for Sienna Cichlid - Fix fall-through warning radeon: - memcpy_to/from_io fixes msm: - NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix sun4i: - hdmi output probing fix mcde: - DSI pipeline calc fix vc4: - out of bounds fix" * tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm: drm/msm/dsi: Stash away calculated vco frequency on recalc drm: Lock pointer access in drm_master_release() drm/mcde: Fix off by 10^3 in calculation drm/msm/a6xx: avoid shadow NULL reference in failure path drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650 drm/msm/a6xx: update/fix CP_PROTECT initialization radeon: use memcpy_to/fromio for UVD fw upload drm/amd/pm: Fix fall-through warning for Clang drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create drm/msm: Init mm_list before accessing it for use_vram path drm: Fix use-after-free read in drm_getunique() drm/vc4: fix vc4_atomic_commit_tail() logic drm/ttm: fix deref of bo->ttm without holding the lock v2 drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device
2021-06-11Merge tag 'acpi-5.13-rc6' of ↵Linus Torvalds2-22/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a problematic recent commit and fix a regression introduced during the 5.12 development cycle. Specifics: - Revert recent commit that attempted to fix the FACS table reference counting but introduced a problem with accessing the hardware signature after hibernation (Zhang Rui). - Fix regression in the _OSC handling that broke the loading of ACPI tables on some systems (Mika Westerberg)" * tag 'acpi-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Pass the same capabilities to the _OSC regardless of the query flag Revert "ACPI: sleep: Put the FACS table after using it"
2021-06-11block: loop: fix deadlock between open and removeChristoph Hellwig2-18/+8
Commit c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk") adds disk->part0->bd_mutex in del_gendisk(), this way causes the following AB/BA deadlock between removing loop and opening loop: 1) loop_control_ioctl(LOOP_CTL_REMOVE) -> mutex_lock(&loop_ctl_mutex) -> del_gendisk -> mutex_lock(&disk->part0->bd_mutex) 2) blkdev_get_by_dev -> mutex_lock(&disk->part0->bd_mutex) -> lo_open -> mutex_lock(&loop_ctl_mutex) Add a new Lo_deleting state to remove the need for clearing ->private_data and thus holding loop_ctl_mutex in the ioctl LOOP_CTL_REMOVE path. Based on an analysis and earlier patch from Ming Lei <ming.lei@redhat.com>. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: c76f48eb5c08 ("block: take bd_mutex around delete_partitions in del_gendisk") Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210605140950.5800-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11Merge tag 'hwmon-for-v5.13-rc6' of ↵Linus Torvalds3-2/+38
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes for tps23861, scpi-hwmon, and corsair-psu drivers, plus a bindings fix for TI ADS7828" * tag 'hwmon-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tps23861) correct shunt LSB values hwmon: (tps23861) set current shunt value hwmon: (tps23861) define regmap max register hwmon: (scpi-hwmon) shows the negative temperature properly hwmon: (corsair-psu) fix suspend behavior dt-bindings: hwmon: Fix typo in TI ADS7828 bindings
2021-06-11Merge tag 'mmc-v5.13-rc3' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes to the Renesas SDHI driver: - Fix HS400 on R-Car M3-W+ - Abort tuning when timeout detected" * tag 'mmc-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+ mmc: renesas_sdhi: abort tuning when timeout detected
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 01:55:42 +0000