summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-11-14vgaarb: a NULL bridge is acceptable for root devices.Dave Airlie1-23/+21
I assumed all PCI buses had a bridge, but playing with qemu recently, I discovered vgaarb bug where it wasn't detecting both devices shared a bridge at the root level. Don't check for NULL, if two buses have a NULL bridge, assume they share the root bus. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-14drm: Remove utterly bogus preempt_disable() sectionsThomas Gleixner1-9/+0
commit 27641c3f (drm/vblank: Add support for precise vblank timestamping) adds preempt_disable()/enable() around a spin locked section with the comments: * Disable preemption, so vblank_time_lock is held as short as * possible, even under a kernel with PREEMPT_RT patches. /* Disable preemption while holding vblank_time_lock. Do * it explicitely to guard against PREEMPT_RT kernel. Just that this has never been tested on a RT kernel which would have granted that nonsense with a might_sleep() warning because dev->vblank_time_lock is converted to a "sleeping" spinlock on RT. So this is activly wrong on RT and superflous on mainline. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-12drm/radeon/kms/combios: fix dynamic allocation of PM clock modesAlex Deucher1-8/+19
I missed the combios path when I updated the atombios pm code. Reported by amarsh04 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms/pm: switch to dynamically allocating clock mode arrayAlex Deucher2-39/+82
On newer chips the number of clock modes per power state varies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms: optimize r600_pm_profile_initAlex Deucher1-68/+32
Avoid a lot of extra loops through the pm state array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms/pm: add a proper pm profile init function for fusionAlex Deucher6-39/+94
The new power tables need to be handled differently when setting up the profiles. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms: remove extraneous calls to radeon_pm_compute_clocks()Alex Deucher2-12/+0
It's already called via the DPMS functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: fix kconfig unmet dependency warningRandy Dunlap1-0/+1
Fix kconfig unmet dependency warning. BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT, so select the latter along with the former. warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie17-65/+123
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: Fix bandwidth calculation for DisplayPort drm/nouveau: by default use low bpp framebuffer on low memory cards drm/nv10: Change the BO size threshold determining the memory placement range. drm/nvc0: enable acceleration for nvc1 by default drm/nvc0/gr: fixup the mmio list register writes for 0xc1 drm/nvc1: hacky workaround to fix accel issues drm/nvc0/gr: fix some bugs in grctx generation drm/nvc0: enable acceleration on 0xc8 by default drm/nvc0/vram: skip disabled PBFB subunits drm/nv40/pm: fix issues on igp chipsets, which don't have memory drm/nouveau: testing the wrong variable drm/nvc0/vram: storage type 0xc3 is not compressed drm/nv50: fix stability issue on NV86. drm/nouveau: initialize chan->fence.lock before use drm/nv50/vram: fix incorrect detection of bank count on newer chipsets drm/nv50/gr: typo fix, how about we not reset fifo during graph init? drm/nv50/bios: fixup mpll programming from the init table parser drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify() drm: make sure drm_vblank_init() has been called before touching vbl_lock
2011-11-11drm: add some comments to drm_wait_vblank and drm_queue_vblank_eventIlija Hadzic1-1/+6
during the review of the fix for locks problems in drm_wait_vblank, a couple of false concerns were raised about how the drm_vblank_get and drm_vblank_put are used in this function; it turned out that the code is correct and that it cannot be simplified add a few comments to explain non-obvious flows in the code, to prevent "false alarms" in the future v2: incorporate comments received from Daniel Vetter Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/benchmark: signedness bug in radeon_benchmark_move()Dan Carpenter1-1/+1
radeon_benchmark_do_move() returns an int so "time" should be int too. Making it unsigned breaks the error handling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: do not sleep on vblank while holding a mutexIlija Hadzic1-1/+1
drm_wait_vblank must be DRM_UNLOCKED because otherwise it will grab the drm_global_mutex and then go to sleep until the vblank event it is waiting for. That can wreck havoc in the windowing system because if one process issues this ioctl, it will block all other processes for the duration of all vblanks between the current and the one it is waiting for. In some cases it can block the entire windowing system. v2: incorporate comments received from Daniel Vetter and Michel Daenzer. v3/v4: after a lengty discussion with Daniel Vetter, it was concluded that the only thing not yet protected with locks and atomic ops is the write to dev->last_vblank_wait. It's only used in a debug file in proc, and the current code already employs no correct locking: the proc file only takes dev->struct_mutex, whereas drm_wait_vblank implicitly took the drm_global_mutex. Given all this, it's not worth bothering to try to fix the locks at this time. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: try to restore previous CRTC config if mode set failsJesse Barnes1-0/+13
We restore the CRTC, encoder, and connector configurations, but if the mode set failed, the attached display may have been turned off, so we need to try set_config again to restore things to the way they were. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms: make an aux failure debug onlyAlex Deucher1-1/+1
Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: drop select of SLOW_WORKPaul Bolle1-1/+0
slow-work got killed in commit 181a51f6e0. This means that since v2.6.36 there is no Kconfig symbol SLOW_WORK. Apparently selecting that symbol is a nop. Drop that select. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: serialize access to list of debugfs filesMarcin Slusarz2-4/+13
Nouveau, when configured with debugfs, creates debugfs files for every channel, so structure holding list of files needs to be protected from simultaneous changes by multiple threads. Without this patch it's possible to hit kernel oops in drm_debugfs_remove_files just by running a couple of xterms with looped glxinfo. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon/kms: fix use of vram scratch page on evergreen/niAlex Deucher1-1/+1
This hunk seems to have gotten lost when I rebased the patch. Reported-by: Sylvain Bertrand <sylvain.bertrand@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm/radeon: Make sure CS mutex is held across GPU reset.Michel Dänzer3-12/+62
This was only the case if the GPU reset was triggered from the CS ioctl, otherwise other processes could happily enter the CS ioctl and wreak havoc during the GPU reset. This is a little complicated because the GPU reset can be triggered from the CS ioctl, in which case we're already holding the mutex, or from other call paths, in which case we need to lock the mutex. AFAICT the mutex API doesn't allow recursive locking or finding out the mutex owner, so we need to handle this with helper functions which allow recursive locking from the same process. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11drm: Ensure string is null terminated.Vinson Lee1-1/+3
Fixes Coverity buffer not null terminated defect. Signed-off-by: Vinson Lee <vlee@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11vmwgfx: Only allow 64x64 cursorsJakob Bornecrantz1-0/+4
Snooping code expects this to be the case. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11vmwgfx: Initialize clip rect loop correctly in surface dirtyJakob Bornecrantz1-2/+3
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11vmwgfx: Close screen object systemJakob Bornecrantz1-1/+4
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-10drm/nouveau: Fix bandwidth calculation for DisplayPortAdam Jackson1-1/+1
Ported from the equivalent fix in drm-intel-next: http://cgit.freedesktop.org/~keithp/linux/commit/?h=drm-intel-next&id=cd9dde44f47501394b9f0715b6a36a92aa74c0d0 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nouveau: by default use low bpp framebuffer on low memory cardsMarcin Slusarz1-1/+10
Framebuffer's BPP is not that important but can waste significant part of memory on low-VRAM cards. Lower it to 8bpp on < 32MB cards and to 16bpp on 64MB cards. It can still be overridden by video= option. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv10: Change the BO size threshold determining the memory placement range.Francisco Jerez1-1/+1
Fixes the framebuffer memory allocation failure seen on some low-memory cards, followed by X refusing to start. https://bugs.freedesktop.org/show_bug.cgi?id=42384 Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0: enable acceleration for nvc1 by defaultBen Skeggs1-1/+3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0/gr: fixup the mmio list register writes for 0xc1Ben Skeggs1-9/+32
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc1: hacky workaround to fix accel issuesBen Skeggs1-0/+8
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0/gr: fix some bugs in grctx generationBen Skeggs1-17/+14
Most serious is for chips with only 1 TPC, we'd get stuck in an infinite loop. The fix here will slightly change the setup for all other chipsets too, but, it shouldn't matter too much, and this all needs figuring out and likely redone anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0: enable acceleration on 0xc8 by defaultBen Skeggs1-1/+0
Worked well enough for glxgears and gnome-shell at least, no reason to have this off anymore. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0/vram: skip disabled PBFB subunitsBen Skeggs1-5/+9
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv40/pm: fix issues on igp chipsets, which don't have memoryBen Skeggs1-5/+15
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nouveau: testing the wrong variableDan Carpenter1-1/+1
memtimings is a valid pointer here, the intent was to test for kcalloc() failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nvc0/vram: storage type 0xc3 is not compressedChristoph Bumiller1-1/+1
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv50: fix stability issue on NV86.Maxim Levitsky1-1/+1
Confirmed to fix random hangs while running all Unegine demos on NV86. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nouveau: initialize chan->fence.lock before useMarcin Slusarz2-2/+1
Fence lock needs to be initialized before any call to nouveau_channel_put because it calls nouveau_channel_idle->nouveau_fence_update which uses fence lock. BUG: spinlock bad magic on CPU#0, test/24134 lock: ffff88019f90dba8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800 Call Trace: spin_bug+0x9c/0xa3 do_raw_spin_lock+0x29/0x13c _raw_spin_lock+0x1e/0x22 nouveau_fence_update+0x2d/0xf1 nouveau_channel_idle+0x22/0xa0 nouveau_channel_put_unlocked+0x84/0x1bd nouveau_channel_put+0x20/0x24 nouveau_channel_alloc+0x4ec/0x585 nouveau_ioctl_fifo_alloc+0x50/0x130 drm_ioctl+0x289/0x361 do_vfs_ioctl+0x4dd/0x52c sys_ioctl+0x42/0x65 system_call_fastpath+0x16/0x1b It's easily triggerable from userspace. Additionally remove double initialization of chan->fence.pending. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv50/vram: fix incorrect detection of bank count on newer chipsetsBen Skeggs1-1/+1
NVA3+ has an extra bit here compared to NV50:NVA3 chipsets. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv50/gr: typo fix, how about we not reset fifo during graph init?Ben Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nv50/bios: fixup mpll programming from the init table parserBen Skeggs1-9/+13
Reportedly this has been causing stability and corruption issues after resuming from suspend for a few people. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify()Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-10drm: make sure drm_vblank_init() has been called before touching vbl_lockBen Skeggs1-6/+9
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-11-08drm/i915: Fix object refcount leak on mmappable size limit error path.Eric Anholt1-1/+1
I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is setKeith Packard1-2/+3
Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
2011-11-08drm/i915: fix if statement (bogus semi-colon)Dan Carpenter1-1/+1
The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-244/+274
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07forcedeth: fix a few sparse warnings (variable shadowing)david decotigny1-17/+17
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Improve stats countersMandeep Baines1-0/+4
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny1-34/+1
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto1-5/+8
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny1-1/+1
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 03:56:17 +0000