summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02opp: Fix adding OPP entries in a wrong order if rate is unavailableDmitry Osipenko1-6/+4
Fix adding OPP entries in a wrong (opposite) order if OPP rate is unavailable. The OPP comparison was erroneously skipped, thus OPPs were left unsorted. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-01-31Merge tag 'efi-urgent-for-v5.11' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Borislav Petkov: "A single fix from Lukas: handle boolean device properties imported from Apple firmware correctly" * tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/apple-properties: Reinstate support for boolean properties
2021-01-31Merge tag 'timers-urgent-2021-01-31' of ↵Linus Torvalds2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A fix for handling advertised, but non-existent 146818 RTCs correctly. With the recent UIP handling changes the time readout of non-existent RTCs hangs forever as the read returns always 0xFF which means the UIP bit is set. Sanity check the RTC before registering by checking the RTC_VALID register for correctness" * tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: mc146818: Detect and handle broken RTCs
2021-01-31Merge branch 'i2c/for-current' of ↵Linus Torvalds1-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Just one I2C driver update this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Move suspend and resume handling to NOIRQ phase
2021-01-31Merge branch 'for-rc-5.11' of ↵Linus Torvalds8-8/+431
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED fixes from Pavel Machek: "This pull is due to 'leds: trigger: fix potential deadlock with libata' -- people find the warn annoying. It also contains new driver and two trivial fixes" * 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon
2021-01-31leds: rt8515: Add Richtek RT8515 LED driverLinus Walleij5-0/+421
This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: linux-media@vger.kernel.org Cc: phone-devel@vger.kernel.org Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: trigger: fix potential deadlock with libataAndrea Righi1-4/+6
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188611f0 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-ariel: convert comma to semicolonZheng Yongjun1-3/+3
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-31leds: leds-lm3533: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-01-30Merge tag 'scsi-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor fixes in drivers. Both changing strings (one in a comment, one in a module help text) with no code impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit scsi: target: iscsi: Fix typo in comment
2021-01-30Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+1
Pull OpenRISC fix from Stafford Horne: "Fix config dependencies for Litex SOC driver causing issues on um" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Properly depend on HAS_IOMEM
2021-01-30Merge tag 'devicetree-fixes-for-5.11-2' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Cleanups on properties with standard unit suffixes - Fix overwriting dma_range_map if there's no 'dma-ranges' property - Fix a bug when creating a /chosen node from ARM ATAGs - Add missing properties for TI j721e USB binding - Several doc reference updates due to DT schema conversions * tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Cleanup standard unit properties of/device: Update dma_range_map only when dev has valid dma-ranges ARM: zImage: atags_to_fdt: Fix node names on added root nodes dt-bindings: usb: j721e: add ranges and dma-coherent props dt-bindings:iio:adc: update adc.yaml reference dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references dt-bindings: display: mediatek: update mediatek,dpi.yaml reference ASoC: audio-graph-card: update audio-graph-card.yaml reference
2021-01-30Merge tag 's390-5.11-4' of ↵Linus Torvalds3-70/+97
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix max number of VCPUs reported via ultravisor information sysfs interface. - Fix memory leaks during vfio-ap resources clean up on KVM pointer invalidation notification. - Fix potential specification exception by avoiding unnecessary interrupts disable after queue reset in vfio-ap. * tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: uv: Fix sysfs max number of VCPUs reporting s390/vfio-ap: No need to disable IRQ after queue reset s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated
2021-01-29Merge tag 'arm64-fixes' of ↵Linus Torvalds1-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses. - Do not blindly trust the DMA masks from ACPI/IORT. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Do not blindly trust DMA masks from firmware arm64: Fix kernel address detection of __is_lm_address()
2021-01-29Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds9-17/+44
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
2021-01-30soc: litex: Properly depend on HAS_IOMEMDavid Gow1-0/+1
The LiteX SOC controller driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver") Signed-off-by: David Gow <davidgow@google.com> [shorne@gmail.com: Fix typo in commit message pointed out in review] Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-01-29Merge tag 'iommu-fixes-v5.11-rc5' of ↵Linus Torvalds5-9/+92
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix to make sure features are detected before they are queried. - Intel IOMMU address alignment check fix for an IOLTB flushing command. - Performance fix for Intel IOMMU to make sure the code does not do full IOTLB flushes all the time. Those flushes are very expensive on emulated IOMMUs. * tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do not use flush-queue when caching-mode is on iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid() iommu/amd: Use IVHD EFR for early initialization of IOMMU features
2021-01-29Merge tag 'acpi-5.11-rc6' of ↵Linus Torvalds2-27/+39
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the handling of notifications in the ACPI thermal driver and address a device enumeration issue leading to the presence of multiple 'MODALIAS=' entries in one uevent file in sysfs in some cases. Specifics: - Modify the ACPI thermal driver to avoid evaluating _TMP directly in its Notify () handler callback and running too many thermal checks for one thermal zone at the same time so as to address a work item accumulation issue observed on some systems that fail to shut down as a result of it (Rafael Wysocki) - Modify the ACPI uevent file creation code to avoid putting multiple 'MODALIAS=' entries in one uevent file in sysfs which breaks systemd-udevd (Kai-Heng Feng)" * tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Do not call acpi_thermal_check() directly ACPI: sysfs: Prefer "compatible" modalias
2021-01-29Merge tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds26-165/+300
Pull drm fixes from Dave Airlie: "Weekly fixes for graphics, nothing too major, nouveau has a few regression fixes for various fallout from header changes previously, vc4 has two fixes, two amdgpu, and a smattering of i915 fixes. All seems on course for a quieter rc7, fingers crossed. nouveau: - fix svm init conditions - fix nv50 modesetting regression - fix cursor plane modifiers - fix > 64x64 cursor regression vc4: - Fix LBM size calculation - Fix high resolutions for hvs5 i915: - Fix ICL MG PHY vswing - Fix subplatform handling - Fix selftest memleak - Clear CACHE_MODE prior to clearing residuals - Always flush the active worker before returning from the wait - Always try to reserve GGTT address 0x0 amdgpu: - Fix a fan control regression on some boards - Fix clang warning" * tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. amdgpu: fix clang build warning Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)" drm/i915/gt: Always try to reserve GGTT address 0x0 drm/i915: Always flush the active worker before returning from the wait drm/i915/selftest: Fix potential memory leak drm/i915: Check for all subplatform bits drm/i915: Fix ICL MG PHY vswing handling drm/i915/gt: Clear CACHE_MODE prior to clearing residuals drm/vc4: Correct POS1_SCL for hvs5 drm/vc4: Correct lbm size and calculation drm/nouveau/nvif: fix method count when pushing an array
2021-01-29tty: avoid using vfs_iocb_iter_write() for redirected console writesLinus Torvalds1-3/+17
It turns out that the vfs_iocb_iter_{read,write}() functions are entirely broken, and don't actually use the passed-in file pointer for IO - only for the preparatory work (permission checking and for the write_iter function lookup). That worked fine for overlayfs, which always builds the new iocb with the same file pointer that it passes in, but in the general case it ends up doing nonsensical things (and could cause an iterator call that doesn't even match the passed-in file pointer). This subtly broke the tty conversion to write_iter in commit 9bb48c82aced ("tty: implement write_iter"), because the console redirection didn't actually end up redirecting anything, since the passed-in file pointer was basically ignored, and the actual write was done with the original non-redirected console tty after all. The main visible effect of this is that the console messages were no longer logged to /var/log/boot.log during graphical boot. Fix the issue by simply not using the vfs write "helper" function at all, and just redirecting the write entirely internally to the tty layer. Do the target writability permission checks when actually registering the target tty with TIOCCONS instead of at write time. Fixes: 9bb48c82aced ("tty: implement write_iter") Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-29Merge branch 'acpi-sysfs'Rafael J. Wysocki1-14/+6
* acpi-sysfs: ACPI: sysfs: Prefer "compatible" modalias
2021-01-29null_blk: cleanup zoned mode initializationDamien Le Moal1-7/+9
To avoid potential compilation problems, replaced the badly written MB_TO_SECTS() macro (missing parenthesis around the argument use) with the inline function mb_to_sects(). And while at it, simplify the calculation of the total number of zones of the device using the round_up() macro. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-29Merge tag 'amd-drm-fixes-5.11-2021-01-28' of ↵Dave Airlie10-12/+47
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-28: amdgpu: - Fix a fan control regression on some boards - Fix clang warning Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com
2021-01-29Merge tag 'drm-intel-fixes-2021-01-28' of ↵Dave Airlie6-31/+67
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc6: - Fix ICL MG PHY vswing - Fix subplatform handling - Fix selftest memleak - Clear CACHE_MODE prior to clearing residuals - Always flush the active worker before returning from the wait - Always try to reserve GGTT address 0x0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com
2021-01-29Merge tag 'drm-misc-fixes-2021-01-27' of ↵Dave Airlie2-7/+12
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull (less than what git shortlog provides): * drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g
2021-01-29Merge branch '04.01-ampere-lite' of git://github.com/skeggsb/linux into ↵Dave Airlie8-115/+174
drm-fixes Mostly a regression fixes here, a couple of which could lead to display hanging, and have been affecting a number of users. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com
2021-01-29drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursorsLyude Paul2-1/+31
While we do handle the additional cursor sizes introduced in NVE4, it looks like we accidentally broke this when converting over to use Nvidia's display headers. Since we now use NVVAL in dispnv50/head907d.c in order to format the value for the cursor layout and NVD9 only had one byte reserved vs. the 2 bytes reserved in later generations, we end up accidentally stripping the second bit in the cursor layout format parameter - causing us to set the wrong cursor size. This fixes that by adding our own curs_set hook for 917d which uses the NV917D headers. Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: ed0b86a90bf9 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-01-29drm/nouveau/kms/nv50-: Report max cursor size to userspaceLyude Paul1-0/+8
Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Lyude Paul <lyude@redhat.com> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-01-29drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planesLyude Paul1-4/+13
Nvidia hardware doesn't actually support using tiling formats with the cursor plane, only linear is allowed. In the future, we should write a testcase for this. Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp") Cc: James Jones <jajones@nvidia.com> Cc: Martin Peres <martin.peres@free.fr> Cc: Jeremy Cline <jcline@redhat.com> Cc: Simon Ser <contact@emersion.fr> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: James Jones <jajones@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-01-29drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devicesKarol Herbst1-0/+4
Fixes a crash when trying to create a channel on e.g. Turing GPUs when NOUVEAU_SVM_INIT was called before. Fixes: eeaf06ac1a558 ("drm/nouveau/svm: initial support for shared virtual memory") Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-01-29drm/nouveau/dispnv50: Restore pushing of all data.Bastian Beranek2-2/+10
Commit f844eb485eb056ad3b67e49f95cbc6c685a73db4 introduced a regression for NV50, which lead to visual artifacts, tearing and eventual crashes. In the changes of f844eb485eb056ad3b67e49f95cbc6c685a73db4 only the first line was correctly translated to the new NVIDIA header macros: - PUSH_NVSQ(push, NV827C, 0x0110, 0, - 0x0114, 0); + PUSH_MTHD(push, NV827C, SET_PROCESSING, + NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE)); The lower part ("0x0114, 0") was probably omitted by accident. This patch restores the push of the missing data and fixes the regression. Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de> Fixes: f844eb485eb05 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14 Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2021-01-28Merge tag 'net-5.11-rc6' of ↵Linus Torvalds62-271/+522
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes including fixes from can, xfrm, wireless, wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related fixes seemed most notable to the users. Current release - regressions: - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the CPU port correctly Current release - new code bugs: - iwlwifi: pcie: reschedule in long-running memory reads Previous releases - regressions: - iwlwifi: dbg: don't try to overwrite read-only FW data - iwlwifi: provide gso_type to GSO packets - octeontx2: make sure the buffer is 128 byte aligned - tcp: make TCP_USER_TIMEOUT accurate for zero window probes - xfrm: fix wraparound in xfrm_policy_addr_delta() - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs in presence of packet reorder - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN - wext: fix NULL-ptr-dereference with cfg80211's lack of commit() Previous releases - always broken: - igc: fix link speed advertising - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing - team: protect features update by RCU to avoid deadlock - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves - fec: fix temporary RMII clock reset on link up - can: dev: prevent potential information leak in can_fill_info() Misc: - mrp: fix bad packing of MRP test packet structures - uapi: fix big endian definition of ipv6_rpl_sr_hdr - add David Ahern to IPv4/IPv6 maintainers" * tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration selftests: forwarding: Specify interface when invoking mausezahn stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family. ibmvnic: Ensure that CRQ entry read are correctly ordered MAINTAINERS: add missing header for bonding net: decnet: fix netdev refcount leaking on error path net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP can: dev: prevent potential information leak in can_fill_info() net: fec: Fix temporary RMII clock reset on link up net: lapb: Add locking to the lapb module team: protect features update by RCU to avoid deadlock MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled ...
2021-01-28mlxsw: spectrum_span: Do not overwrite policer configurationIdo Schimmel2-0/+7
The purpose of the delayed work in the SPAN module is to potentially update the destination port and various encapsulation parameters of SPAN agents that point to a VLAN device or a GRE tap. The destination port can change following the insertion of a new route, for example. SPAN agents that point to a physical port or the CPU port are static and never change throughout the lifetime of the SPAN agent. Therefore, skip over them in the delayed work. This fixes an issue where the delayed work overwrites the policer that was set on a SPAN agent pointing to the CPU. Modifying the delayed work to inherit the original policer configuration is error-prone, as the same will be needed for any new parameter. Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressingVoon Weifeng1-0/+2
Fix an issue where dump stack is printed and Reset Adapter occurs when PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use 32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing. [ 25.535095] ------------[ cut here ]------------ [ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out [ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260 [ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore [ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5 [ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020 [ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260 [ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 [ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286 [ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103 [ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff [ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff [ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c [ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940 [ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000 [ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0 [ 25.754900] Call Trace: [ 25.757631] <IRQ> [ 25.759891] ? qdisc_put_unlocked+0x30/0x30 [ 25.764565] ? qdisc_put_unlocked+0x30/0x30 [ 25.769245] call_timer_fn+0x2e/0x140 [ 25.773346] run_timer_softirq+0x1f3/0x430 [ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0 [ 25.783005] ? ktime_get+0x3e/0xa0 [ 25.786812] __do_softirq+0xa6/0x2ef [ 25.790816] asm_call_irq_on_stack+0xf/0x20 [ 25.795501] </IRQ> [ 25.797852] do_softirq_own_stack+0x5d/0x80 [ 25.802538] irq_exit_rcu+0x94/0xb0 [ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0 [ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370 [ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206 [ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f [ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d [ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00 [ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0 [ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000 [ 25.889918] cpuidle_enter+0x29/0x40 [ 25.893922] do_idle+0x24a/0x290 [ 25.897536] cpu_startup_entry+0x19/0x20 [ 25.901930] start_secondary+0x128/0x160 [ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb [ 25.911983] ---[ end trace b4c0c8195d0ba61f ]--- [ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter. Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.Giacinto Cifelli1-0/+6
lsusb -v for this device: Bus 003 Device 007: ID 1e2d:0069 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x0069 bcdDevice 0.00 iManufacturer 4 Cinterion Wireless Modules iProduct 3 PLSx3 iSerial 5 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 352 bNumInterfaces 10 bConfigurationValue 1 iConfiguration 2 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 8 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 0 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 00A0C6C14190 bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 8 bSlaveInterface 9 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 9 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme into block-5.11Jens Axboe3-2/+4
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng)" * tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme: nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
2021-01-28amdgpu: fix clang build warningArnd Bergmann3-4/+8
clang warns about the -mhard-float command line arguments on architectures that do not support this: clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument] Move this into the gcc-specific arguments. Fixes: e77165bf7b02 ("drm/amd/display: Add DCN3 blocks to Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-28Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"Alex Deucher7-8/+39
On some boards the rpm interface apparently does not work at all leading to the fan not spinning or spinning at strange speeds. Revert this for now to fix 5.10, 5.11. The follow on patch fixes this properly for 5.12. This reverts commit 8d6e65adc25e23fabbc5293b6cd320195c708dca. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-01-28nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_headChao Leng1-1/+1
The "list" of nvme_ns_head is used as rcu list, now in nvme_init_ns_head list_add_tail is used to add ns->siblings to the rcu list. It is not safe. Should use list_add_tail_rcu instead of list_add_tail. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-28nvme-multipath: Early exit if no path is availableDaniel Wagner1-1/+1
nvme_round_robin_path() should test if the return ns pointer is valid. nvme_next_ns() will return a NULL pointer if there is no path left. Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy") Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-28nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC deviceChaitanya Kulkarni1-0/+2
This adds a quirk for SPCC 256GB NVMe 1.3 drive which fixes timeouts and I/O errors due to the fact that the controller does not properly handle the Write Zeroes command: [ 2745.659527] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 5.10.6-BET #1 [ 2745.659528] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 3001 12/04/2020 [ 2776.138874] nvme nvme1: I/O 414 QID 3 timeout, aborting [ 2776.138886] nvme nvme1: I/O 415 QID 3 timeout, aborting [ 2776.138891] nvme nvme1: I/O 416 QID 3 timeout, aborting [ 2776.138895] nvme nvme1: I/O 417 QID 3 timeout, aborting [ 2776.138912] nvme nvme1: Abort status: 0x0 [ 2776.138921] nvme nvme1: I/O 428 QID 3 timeout, aborting [ 2776.138922] nvme nvme1: Abort status: 0x0 [ 2776.138925] nvme nvme1: Abort status: 0x0 [ 2776.138974] nvme nvme1: Abort status: 0x0 [ 2776.138977] nvme nvme1: Abort status: 0x0 [ 2806.346792] nvme nvme1: I/O 414 QID 3 timeout, reset controller [ 2806.363566] nvme nvme1: 15/0/0 default/read/poll queues [ 2836.554298] nvme nvme1: I/O 415 QID 3 timeout, disable controller [ 2836.672064] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672072] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672074] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672076] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672078] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672080] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672082] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672083] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672085] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672087] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672121] nvme nvme1: failed to mark controller live state [ 2836.672123] nvme nvme1: Removing after probe failure status: -19 [ 2836.689016] Aborting journal on device dm-0-8. [ 2836.689024] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write [ 2836.689027] JBD2: Error -5 detected when updating journal superblock for dm-0-8. Reported-by: Bradley Chapman <chapman6235@comcast.net> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Bradley Chapman <chapman6235@comcast.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-28Merge tag 'for-linus-5.11-rc6-tag' of ↵Linus Torvalds2-13/+38
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a regression introduced in 5.11 resulting in Xen dom0 having problems to correctly initialize Xenstore. - A fix for avoiding WARN splats when booting as Xen dom0 with CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the #VC exception (even if the handler should never be called). - A fix for the Xen bklfront driver adapting to the correct but unexpected behavior of new qemu. * tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled xen: Fix XenStore initialisation for XS_LOCAL xen-blkfront: allow discard-* nodes to be optional
2021-01-28Merge tag 'arm-soc-fixes-v5.11-2' of ↵Linus Torvalds5-2/+19
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the current arm-soc bug fixes for linux-5.11. I already merged a larger set that just came in during the past three days but has not had much exposure in linux-next, but this is the subset I merged last week. Most of these are for the NXP i.MX platform (descriptions from their pull request): - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from #pwm-cells conversion. - Fix duplicated bus node name for i.MX8MN SoC. - Fix reset register offset on LS1028A SoC. - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device index consistent with previous kernel version. - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure with i.MX8M SoC driver. - Fix typos with status property on imx6qdl-kontron-samx6i board. - Fix duplicated regulator-name on imx6qdl-gw52xx board. Aside from i.MX, the bugfixes are all over the place: - Coccinelle found a refcount imbalance on integrator - defconfig fix for TI K3 - A boot regression fix for ST ux500 - A code preemption fix for the optee driver - USB DMA regression on Broadcom Stingray - A bogus boot time warning fix for at91 code" * tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Include bcm2835 subsequents into search arm64: dts: broadcom: Fix USB DMA address translation for Stingray drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[] drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs tee: optee: replace might_sleep with cond_resched firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset ARM: dts: ux500: Reserve memory carveouts arm64: defconfig: Drop unused K3 SoC specific options bus: arm-integrator-lm: Add of_node_put() before return statement ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status ARM: imx: fix imx8m dependencies ARM: dts: tbs2910: rename MMC node aliases arm64: dts: ls1028a: fix the offset of the reset register arm64: dts: imx8mn: Fix duplicate node name ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
2021-01-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds10-16/+44
Pull rdma fixes from Jason Gunthorpe: "Several recent regressions and some bug fixes: - Typo corrupting the max_recv_sge for cxgb4 - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma - Sleeping inside a spinlock in hns - Revert the attempt to fix devlink deadlocks as the fix is more buggy - Typo in sysfs_emit_at conversions - Revert the removal of VLAN support in rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: Revert "RDMA/rxe: Remove VLAN code leftovers from RXE" RDMA/usnic: Fix misuse of sysfs_emit_at Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion" RDMA/hns: Use mutex instead of spinlock for ida allocation RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC RDMA/cxgb4: Fix the reported max_recv_sge value
2021-01-28Merge branch 'for-linus' of ↵Linus Torvalds3-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference regression fix for Wacom driver (Jason Gerecke) - functional regression fix for pam handling on some Elan and Synaptics touchpads (Kai-Heng Feng) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: Correct NULL dereference on AES pen proximity HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices
2021-01-28Merge tag 'media/v5.11-2' of ↵Linus Torvalds14-23/+19
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a V4L2 core regression at videobuf2 when checking for single-plane dmabuf - a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT() macro is not available in userspace - fix some regressions at RC core due to the usage of microseconds everywhere on it - a fix for a race condition at RC core - a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate), currently used only by a single driver - Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus, and cec drivers. * tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: hantro: Fix reset_raw_fmt initialization media: cec: add stm32 driver media: cedrus: Fix H264 decoding media: v4l2-subdev.h: BIT() is not available in userspace media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing" media: rc: ite-cir: fix min_timeout calculation media: venus: core: Fix platform driver shutdown media: rc: fix timeout handling after switch to microsecond durations media: v4l: common: Fix naming of v4l2_get_link_rate media: rcar-vin: fix return, use ret instead of zero media: ccs: Get static data version minor correctly media: ccs-pll: Fix link frequency for C-PHY media: rc: ensure that uevent can be read directly after rc device register
2021-01-28Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-24/+9
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes: - Build fix for CONFIG_PM=n in the mmp2 driver - Kconfig warning for unmet dependencies in the i.MX driver - Make the camera AHB clk always be enabled on qcom sc7180 - Use rate round down semantics for qcom sm8250 SD clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: mmp2: fix build without CONFIG_PM clk: qcom: gcc-sm250: Use floor ops for sdcc clks clk: imx: fix Kconfig warning for i.MX SCU clk clk: qcom: gcc-sc7180: Mark the camera abh clock always ON
2021-01-28bcache: only check feature sets when sb->version >= ↵Coly Li1-0/+6
BCACHE_SB_VERSION_CDEV_WITH_FEATURES For super block version < BCACHE_SB_VERSION_CDEV_WITH_FEATURES, it doesn't make sense to check the feature sets. This patch checks super block version in bch_has_feature_* routines, if the version doesn't have feature sets yet, returns 0 (false) to the caller. Fixes: 5342fd425502 ("bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Cc: stable@vger.kernel.org # 5.9+ Reported-and-tested-by: Bockholdt Arne <a.bockholdt@precitec-optronik.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-28iommu/vt-d: Do not use flush-queue when caching-mode is onNadav Amit1-1/+31
When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-01-28iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()Lu Baolu1-1/+1
An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid() to check the address alignment. This leads to a lot of spurious kernel warnings: [ 485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed [ 492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11 [ 492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11 Fix it by checking the alignment in right way. Fixes: 288d08e780088 ("iommu/vt-d: Handle non-page aligned address") Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Liu Yi L <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>