summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-10-05fs/kernel_file_read: Add "offset" arg for partial readsKees Cook1-1/+1
To perform partial reads, callers of kernel_read_file*() must have a non-NULL file_size argument and a preallocated buffer. The new "offset" argument can then be used to seek to specific locations in the file to fill the buffer to, at most, "buf_size" per call. Where possible, the LSM hooks can report whether a full file has been read or not so that the contents can be reasoned about. Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201002173828.2099543-14-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05firmware_loader: Use security_post_load_data()Kees Cook2-5/+11
Now that security_post_load_data() is wired up, use it instead of the NULL file argument style of security_post_read_file(), and update the security_kernel_load_data() call to indicate that a security_kernel_post_load_data() call is expected. Wire up the IMA check to match earlier logic. Perhaps a generalized change to ima_post_load_data() might look something like this: return process_buffer_measurement(buf, size, kernel_load_data_id_str(load_id), read_idmap[load_id] ?: FILE_CHECK, 0, NULL); Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Link: https://lore.kernel.org/r/20201002173828.2099543-10-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05LSM: Introduce kernel_post_load_data() hookKees Cook2-2/+2
There are a few places in the kernel where LSMs would like to have visibility into the contents of a kernel buffer that has been loaded or read. While security_kernel_post_read_file() (which includes the buffer) exists as a pairing for security_kernel_read_file(), no such hook exists to pair with security_kernel_load_data(). Earlier proposals for just using security_kernel_post_read_file() with a NULL file argument were rejected (i.e. "file" should always be valid for the security_..._file hooks, but it appears at least one case was left in the kernel during earlier refactoring. (This will be fixed in a subsequent patch.) Since not all cases of security_kernel_load_data() can have a single contiguous buffer made available to the LSM hook (e.g. kexec image segments are separately loaded), there needs to be a way for the LSM to reason about its expectations of the hook coverage. In order to handle this, add a "contents" argument to the "kernel_load_data" hook that indicates if the newly added "kernel_post_load_data" hook will be called with the full contents once loaded. That way, LSMs requiring full contents can choose to unilaterally reject "kernel_load_data" with contents=false (which is effectively the existing hook coverage), but when contents=true they can allow it and later evaluate the "kernel_post_load_data" hook once the buffer is loaded. With this change, LSMs can gain coverage over non-file-backed data loads (e.g. init_module(2) and firmware userspace helper), which will happen in subsequent patches. Additionally prepare IMA to start processing these cases. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05fs/kernel_read_file: Add file_size output argumentKees Cook1-0/+1
In preparation for adding partial read support, add an optional output argument to kernel_read_file*() that reports the file size so callers can reason more easily about their reading progress. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20201002173828.2099543-8-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05fs/kernel_read_file: Remove redundant size argumentKees Cook1-4/+6
In preparation for refactoring kernel_read_file*(), remove the redundant "size" argument which is not needed: it can be included in the return code, with callers adjusted. (VFS reads already cannot be larger than INT_MAX.) Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20201002173828.2099543-6-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05fs/kernel_read_file: Split into separate include fileScott Branden1-0/+1
Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h include file. That header gets pulled in just about everywhere and doesn't really need functions not related to the general fs interface. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05fs/kernel_read_file: Remove FIRMWARE_EFI_EMBEDDED enumKees Cook1-1/+1
The "FIRMWARE_EFI_EMBEDDED" enum is a "where", not a "what". It should not be distinguished separately from just "FIRMWARE", as this confuses the LSMs about what is being loaded. Additionally, there was no actual validation of the firmware contents happening. Fixes: e4c2c0ff00ec ("firmware: Add new platform fallback mechanism and firmware_request_platform()") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201002173828.2099543-3-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05fs/kernel_read_file: Remove FIRMWARE_PREALLOC_BUFFER enumKees Cook1-3/+2
FIRMWARE_PREALLOC_BUFFER is a "how", not a "what", and confuses the LSMs that are interested in filtering between types of things. The "how" should be an internal detail made uninteresting to the LSMs. Fixes: a098ecd2fa7d ("firmware: support loading into a pre-allocated buffer") Fixes: fd90bc559bfb ("ima: based on policy verify firmware signatures (pre-allocated buffer)") Fixes: 4f0496d8ffa3 ("ima: based on policy warn about loading firmware (pre-allocated buffer)") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201002173828.2099543-2-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05power: supply: Constify static w1_family_ops structsRikard Falkeborn3-3/+3
The only usage of these structs is to assign their address to the fops field in the w1_family struct, which is a const pointer. Make them const to allow the compiler to put them in read-only memory. This was done with the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @r1 disable optional_qualifier @ identifier i; position p; @@ static struct w1_family_ops i@p = {...}; @ok1@ identifier r1.i; position p; identifier s; @@ static struct w1_family s = { .fops=&i@p, }; @bad1@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad1 disable optional_qualifier@ identifier r1.i; @@ static +const struct w1_family_ops i={}; // </smpl> Acked-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201004193202.4044-4-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05w1: Constify static w1_family_ops structsRikard Falkeborn17-19/+19
The only usage of these structs is to assign their address to the fops field in the w1_family struct, which is a const pointer. Make them const to allow the compiler to put them in read-only memory. This was done with the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @r1 disable optional_qualifier @ identifier i; position p; @@ static struct w1_family_ops i@p = {...}; @ok1@ identifier r1.i; position p; identifier s; @@ static struct w1_family s = { .fops=&i@p, }; @bad1@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad1 disable optional_qualifier@ identifier r1.i; @@ static +const struct w1_family_ops i={}; // </smpl> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201004193202.4044-3-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05w1: Constify struct w1_family_opsRikard Falkeborn1-1/+1
The fops field in the w1_family struct is never modified. Make it const to indicate that. Constifying the pointer makes it possible for drivers to declare static w1_family_ops structs const, which in turn will allow the compiler to put it in read-only memory. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201004193202.4044-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05intel_th: pci: Add Alder Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Alder Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-9-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05intel_th: pci: Add Alder Lake-S supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Alder Lake-S. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-8-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Use different channel accroding to CPUTingwei Zhang1-1/+4
To avoid mixup of packets from differnt ftrace packets simultaneously, use different channel for packets from different CPU. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Enable supported trace export flagTingwei Zhang1-0/+2
Set flags for trace_export. Export function trace, event trace and trace marker to stm. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Change dependency to TRACINGTingwei Zhang1-1/+1
We will support copying event trace to STM. Change STM_SOURCE_FTRACE to depend on TRACING since we will support multiple tracers. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge tag 'extcon-next-for-5.10-v2' of ↵Greg Kroah-Hartman8-151/+118
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Detailed description for this pull request: 1. Update extcon driver with minor updates: - Covert the devicetree binding format from txt to yaml and edit the bidning document for extcon-ptn5150.c. - Clean-up the code of extcon-ptn5150.c without any behavior changes. - Replace HTTP links with HTTPS ones on extcon-palmas.c and extcon-usb-gpio.c. - Return the proper error code on extcon-max14577/max77693/max77843.c. - Simplify with dev_err_probe() on extcon-palmas.c. - Use module_platform_driver to simplify the code on extcon-axp288.c. 2. Update MAINTAINERS - Add Krzysztof Kozlowski as maintainer of NXP PTN5150A CC/extcon driver to provide review, feedback and testing. * tag 'extcon-next-for-5.10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: (25 commits) extcon: axp288: Use module_platform_driver to simplify the code extcon: ptn5150: Do not print error during probe if nothing is attached extcon: ptn5150: Use defines for registers extcon: palmas: Simplify with dev_err_probe() extcon: max8997: Return error code of extcon_dev_allocate() extcon: max77843: Return error code of extcon_dev_allocate() extcon: max77693: Return error code of extcon_dev_allocate() extcon: max14577: Return error code of extcon_dev_allocate() extcon: ptn5150: Set the VBUS and POLARITY property capability extcon: ptn5150: Switch to GENMASK() and BIT() macros extcon: ptn5150: Deduplicate parts of dev_err_probe() extcon: Replace HTTP links with HTTPS ones MAINTAINERS: Add entry for NXP PTN5150A CC driver extcon: ptn5150: Convert to .probe_new extcon: ptn5150: Convert to module_i2c_driver extcon: ptn5150: Reduce the amount of logs on deferred probe extcon: ptn5150: Make 'vbus-gpios' optional extcon: ptn5150: Check current USB mode when probing extcon: ptn5150: Lower the noisiness of probe extcon: ptn5150: Simplify getting vbus-gpios with flags ...
2020-10-02bus/fsl-mc: Add a new version for dprc_get_obj_region commandDiana Craciun2-14/+27
The region size reported by the firmware for mc and software portals was less than allocated by the hardware. This may be problematic when mmapping the region in user space because the region size is less than page size. However the size as reserved by the hardware is 64K. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-14-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Extend ICID size from 16bit to 32bitBharat Bhushan3-5/+4
In virtual machines the device-id range is defined between 0x10000-0x20000. The reason for using such a large range is to avoid overlapping with the PCI range. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-13-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export IRQ pool handling functions to be used by VFIODiana Craciun3-19/+11
The IRQ pool handling functions can be used by both DPRC driver and VFIO. Adapt and export those functions. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-12-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl_mc: Do not rely on caller to provide non NULL mc_ioDiana Craciun1-1/+6
Before destroying the mc_io, check first that it was allocated. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-11-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add a container setup functionDiana Craciun1-22/+49
Both DPRC driver and VFIO driver use the same initialization code for the DPRC. Introduced a new function which groups this initialization code. The function is exported and may be used by VFIO as well. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-10-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export a cleanup function for DPRCDiana Craciun1-15/+47
Create and export a cleanup function for DPRC. The function is used by the DPRC driver, but it will be used by the VFIO driver as well. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-9-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export dprc_scan/dprc_remove functions to be used by multiple ↵Diana Craciun2-15/+12
entities Currently the DPRC scan function is used only by the bus driver. But the same functionality will be needed by the VFIO driver. To support this, the dprc scan function was exported and a little bit adjusted to fit both scenarios. Also the scan mutex initialization is done when the bus object is created, not in dprc_probe in order to be used by both VFIO and bus driver. Similarily dprc_remove_devices is exported to be used by VFIO. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-8-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add dprc-reset-container supportBharat Bhushan2-0/+78
DPRC reset is required by VFIO-mc in order to stop a device to further generate DMA transactions. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-7-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Cache the DPRC API versionDiana Craciun1-9/+21
There are already firmware API commands that have multiple versions. For each multiple version command, another command to retrieve the API version is issued. This may introduce an important overhead. The version does not change while the system is running, so the DPRC API version can be safely cached. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-6-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Set the QMAN/BMAN region flagsDiana Craciun2-11/+2
The QMAN region is memory mapped, so it should be of type IORESOURCE_MEM. The region flags bits were wrongly used to pass additional information. Use the bus specific bits for this purpose. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-5-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: add support for 'driver_override' in the mc-busBharat Bhushan1-0/+54
This patch is required for vfio-fsl-mc meta driver to successfully bind layerscape container devices for device passthrough. This patch adds a mechanism to allow a layerscape device to specify a driver rather than a layerscape driver provide a device match. Example to allow a device (dprc.1) to specifically bind with driver (vfio-fsl-mc):- - echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.1/driver_override - echo dprc.1 > /sys/bus/fsl-mc/drivers/fsl_mc_dprc/unbind - echo dprc.1 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-4-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add a new parameter to dprc_scan_objects functionDiana Craciun1-4/+7
Prepare the dprc_scan_objects function to be used by the VFIO mc driver code. The function is used to scan the mc objects by the bus driver. The same functionality is needed by the VFIO mc driver, but in this case the interrupt configuration is delayed until the userspace configures the interrupts. In order to use the same function in both drivers add a new parameter. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-3-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Do no longer export the total number of irqs outside ↵Diana Craciun1-20/+10
dprc_scan_objects The total number of interrupts is only used for some checks outside the dprc_scan_objects function. Furthermore, in some situations the check is made twice. Move the bounds check inside the function for all situations. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-2-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02mic: vop: copy data to kernel space then write to io memorySherry Sun1-6/+14
Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: add round_up(x,4) for vring_size to avoid kernel panicSherry Sun2-3/+3
Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like: 0x90002400: 00000000 00390000 EE010000 0000C0FF Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member. When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue. So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way: 0x90002400: 00000000 00000000 00000039 C0FFEE01 Which will avoid kernel panic when read magic in struct _mic_vring_info. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: build VOP based on CONFIG_VOPSherry Sun1-1/+1
Build module or builtin VOP based on CONFIG_VOP macro. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: mxc_w1: Fix timeout resolution problem leading to bus errorMartin Fuzzey1-7/+7
On my platform (i.MX53) bus access sometimes fails with w1_search: max_slave_count 64 reached, will continue next search. The reason is the use of jiffies to implement a 200us timeout in mxc_w1_ds2_touch_bit(). On some platforms the jiffies timer resolution is insufficient for this. Fix by replacing jiffies by ktime_get(). For consistency apply the same change to the other use of jiffies in mxc_w1_ds2_reset_bus(). Fixes: f80b2581a706 ("w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1601455030-6607-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: set VIRTIO_F_ACCESS_PLATFORM for vop driverSherry Sun1-0/+1
Set VIRTIO_F_ACCESS_PLATFORM feature for vop driver, as the DMA mapping details shouldn't decide on the virtio implementation, but the host PCIe implementation. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929084944.24146-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: fsl-mc: MC control registers are not always availableLaurentiu Tudor1-4/+4
As per the device tree binding, in certain scenarios such as virtualization scenarios, the MC control registers are not available so don't error out if they are not present. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200914105459.27448-2-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: fsl-mc: don't assume an iommu is always presentLaurentiu Tudor1-3/+0
There are certain scenarios where an iommu is not present, e.g. booting in a VM. Let's support these scenarios by dropping the check. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200914105459.27448-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add support for GXCAS GX20MH01 device.Ivan Zaentsev1-28/+78
GX20MH01 device shares family number 0x28 with DS18B20. The device is generally compatible with DS18B20. Added are the lowest 2^-5, 2^-6 temperature bits in Config register; R2 bit in Config register enabling 13 and 14 bit resolutions. It is powered up in 14 bit mode. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20200904160004.87710-2-ivan.zaentsev@wirenboard.ru Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: w1_therm: Add sysfs entries to control conversion time and driver featuresIvan Zaentsev1-26/+331
The conversion time of common DS18B20 clones deviates from datasheet specs. Allow adjustment and automatic measure of the conversion time. Add 'conv_time' sysfs attribute: *read*: Current conversion time in milliseconds. *write*: '0': Set default conversion time. '1': Measure and set the conversion time. Make a single temperature conversion, poll and measure an actual value. Measured value is increased by 20% for temperature drift. A new conversion time is returned by reading the same attribute. other positive value: Set the conversion time in milliseconds. The setting is active until a resolution change. Then it is reset to default conversion time for a new resolution. Add 'features' sysfs attribute to control optional driver settings per device. Bit masks to read/write (logical OR): 1: Enable check for conversion success. If byte 6 of scratchpad memory is 0xC after conversion, and temperature reads 85.00 (powerup value) or 127.94 (insufficient power) - return a conversion error. 2: Enable poll for conversion completion. Generate read cycles after the conversion start and wait for 1's. In parasite power mode this feature is not available. There are some clones of DS18B20 with fixed 12 bit resolution. Make the driver verify the resolution by reading back the device after resolution change. Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Link: https://lore.kernel.org/r/20200904160004.87710-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02eeprom: ee1004: use module_i2c_driver to simplify the codeLiu Shixin1-12/+1
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200918030225.3902750-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02virt: vbox: simplify the return expression of vbg_input_open()Qinglang Miao1-6/+1
Simplify the return expression. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131113.93459-1-miaoqinglang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: simplify the return expression of free_function_dev()Qinglang Miao1-6/+1
Simplify the return expression. Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131047.92526-1-miaoqinglang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02ocxl: fix kconfig dependency warning for OCXLNecip Fazil Yildiran1-2/+1
When OCXL is enabled and HOTPLUG_PCI is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for HOTPLUG_PCI_POWERNV Depends on [n]: PCI [=y] && HOTPLUG_PCI [=n] && PPC_POWERNV [=y] && EEH [=y] Selected by [y]: - OCXL [=y] && PPC_POWERNV [=y] && PCI [=y] && EEH [=y] The reason is that OCXL selects HOTPLUG_PCI_POWERNV without depending on or selecting HOTPLUG_PCI while HOTPLUG_PCI_POWERNV is subordinate to HOTPLUG_PCI. HOTPLUG_PCI_POWERNV is a visible symbol with a set of dependencies. Selecting it will lead to overlooking its other dependencies as well. Let OCXL depend on HOTPLUG_PCI_POWERNV instead to avoid Kbuild issues. Fixes: 49ce94b8677c ("ocxl: Add PCI hotplug dependency to Kconfig") Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200918094148.20525-1-fazilyildiran@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: debugfs: Print channel context read-pointerLoic Poulain1-2/+3
This value was missing in the channel debugfs output. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-20-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Fix the building of MHI moduleManivannan Sadhasivam1-1/+1
The Kbuild rule to build MHI should use the append operator. This fixes the below warning reported by Kbuild test bot. WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/main.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/pm.o WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/mhi/core/boot.o Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-19-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Remove unused nr_irqs_req variableLoic Poulain1-3/+0
nr_irqs_req is unused in MHI stack. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-18-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Allow shared IRQ for event ringsLoic Poulain2-1/+8
There is no requirement for using a dedicated IRQ per event ring. Some systems does not support multiple MSI vectors (e.g. intel without CONFIG_IRQ_REMAP), In that case the MHI controller can configure all the event rings to use the same interrupt (as fallback). Allow this by removing the nr_irqs = ev_ring test and add extra check in the irq_setup function. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-17-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce sysfs entries for MHIBhaumik Bhatt1-0/+37
Introduce sysfs entries to enable userspace clients the ability to read the serial number and the OEM PK Hash values obtained from BHI. OEMs need to read these device-specific hardware information values through userspace for factory testing purposes and cannot be exposed via degbufs as it may remain disabled for performance reasons. Also, update the documentation for ABI to include these entries. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: used dev_groups to manage sysfs attributes] Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-16-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce debugfs entries for MHIBhaumik Bhatt5-0/+450
Introduce debugfs entries to show state, register, channel, device, and event rings information. Allow the host to dump registers, issue device wake, and change the MHI timeout to help in debug. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Fix entries based on Kconfig coding styleBhaumik Bhatt1-6/+6
Kconfig coding style mandates use of tabs for the configuration definition and an additional two spaces for the help text. Make the required changes to the MHI Kconfig adhering to those guidelines. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-14-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-23 18:58:53 +0000