| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small part
of fixing a long-standing disconnect between pinning pages, and file
systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: http://lkml.kernel.org/r/20200518012157.1178336-3-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After an NFS page has been written it is considered "unstable" until a
COMMIT request succeeds. If the COMMIT fails, the page will be
re-written.
These "unstable" pages are currently accounted as "reclaimable", either
in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a
'reclaimable' count. This might have made sense when sending the COMMIT
required a separate action by the VFS/MM (e.g. releasepage() used to
send a COMMIT). However now that all writes generated by ->writepages()
will automatically be followed by a COMMIT (since commit 919e3bd9a875
("NFS: Ensure we commit after writeback is complete")) it makes more
sense to treat them as writeback pages.
So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in
NR_WRITEBACK and WB_WRITEBACK.
A particular effect of this change is that when
wb_check_background_flush() calls wb_over_bg_threshold(), the latter
will report 'true' a lot less often as the 'unstable' pages are no
longer considered 'dirty' (as there is nothing that writeback can do
about them anyway).
Currently wb_check_background_flush() will trigger writeback to NFS even
when there are relatively few dirty pages (if there are lots of unstable
pages), this can result in small writes going to the server (10s of
Kilobytes rather than a Megabyte) which hurts throughput. With this
patch, there are fewer writes which are each larger on average.
Where the NR_UNSTABLE_NFS count was included in statistics
virtual-files, the entry is retained, but the value is hard-coded as
zero. static trace points and warning printks which mentioned this
counter no longer report it.
[akpm@linux-foundation.org: re-layout comment]
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Michal Hocko <mhocko@suse.com> [mm]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the
loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a
daemon needs to write to one bdi (the final bdi) in order to free up
writes queued to another bdi (the client bdi).
The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty
pages, so that it can still dirty pages after other processses have been
throttled. The purpose of this is to avoid deadlock that happen when
the PF_LESS_THROTTLE process must write for any dirty pages to be freed,
but it is being thottled and cannot write.
This approach was designed when all threads were blocked equally,
independently on which device they were writing to, or how fast it was.
Since that time the writeback algorithm has changed substantially with
different threads getting different allowances based on non-trivial
heuristics. This means the simple "add 25%" heuristic is no longer
reliable.
The important issue is not that the daemon needs a *larger* dirty page
allowance, but that it needs a *private* dirty page allowance, so that
dirty pages for the "client" bdi that it is helping to clear (the bdi
for an NFS filesystem or loop block device etc) do not affect the
throttling of the daemon writing to the "final" bdi.
This patch changes the heuristic so that the task is not throttled when
the bdi it is writing to has a dirty page count below below (or equal
to) the free-run threshold for that bdi. This ensures it will always be
able to have some pages in flight, and so will not deadlock.
In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might
still be throttled by global threshold, but that is acceptable as it is
only the deadlock state that is interesting for this flag.
This approach of "only throttle when target bdi is busy" is consistent
with the other use of PF_LESS_THROTTLE in current_may_throttle(), were
it causes attention to be focussed only on the target bdi.
So this patch
- renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE,
- removes the 25% bonus that that flag gives, and
- If PF_LOCAL_THROTTLE is set, don't delay at all unless the
global and the local free-run thresholds are exceeded.
Note that previously realtime threads were treated the same as
PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour
for real-time threads, so it is now different from the behaviour of nfsd
and loop tasks. I don't know what is wanted for realtime.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After introduction attach/detach_page_private in pagemap.h, we can remove
the duplicated code and call the new functions.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Song Liu <song@kernel.org>
Link: http://lkml.kernel.org/r/20200517214718.468-3-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.
Currently, syncfs does not return errors when one of the inodes fails to
be written back. It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.
The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.
This patch (of 2):
Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.
Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect. If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error. syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.
It would be better if syncfs reported an error if there were any
writeback failures. Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.
This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.
To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor. This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.
An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.
I think that API is just too weird though. This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Fix i10nm_edac loading on some Ice Lake and Tremont/Jacobsville
steppings due to the offset change of the bus number configuration
register, by Qiuxu Zhuo.
- The usual cleanups and fixes all over the place.
* tag 'edac_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Remove redundant assignment to variable ret in hw_info_get()
EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enable
EDAC/i10nm: Update driver to support different bus number config register offsets
EDAC, {skx,i10nm}: Make some configurations CPU model specific
EDAC/amd8131: Remove defined but not used bridge_str
EDAC/thunderx: Make symbols static
MAINTAINERS: Remove sifive_l2_cache.c from EDAC-SIFIVE pattern
EDAC/xgene: Remove set but not used address local var
EDAC/armada_xp: Fix some log messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c update from Boris Brezillon:
"Fix GETMRL's logic"
* tag 'i3c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOAD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is that Matti Vaittinen has factored
out the linear ranges support into a separate library in lib/ since it
is also useful for at least the power subsystem (and most likely
others too), it helps subsystems which need to map register values
into more useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998"
* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: max8998: max8998_set_current_limit() can be static
dt-bindings: regulator: Convert anatop regulator to json-schema
regulator: core: Add regulator bypass trace points
regulator: extract voltage balancing code to the separate function
regulator/mfd: max8998: Document charger regulator
regulator: max8998: Add charger regulator
MAINTAINERS: Add maintainer entry for linear ranges helper
regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
lib: linear_ranges: Add missing MODULE_LICENSE()
regulator: use linear_ranges helper
power: supply: bd70528: rename linear_range to avoid collision
lib/test_linear_ranges: add a test for the 'linear_ranges'
lib: add linear ranges helpers
regulator: db8500-prcmu: Use true,false for bool variable
regulator: bd718x7: remove voltage change restriction from BD71847
regulator: max77826: Remove erroneous additionalProperties
regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
regulator: Document bindings for max77826
regulator: max77826: Add max77826 regulator driver
regulator: tps80031: remove redundant assignment to variables ret and val
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a very active release for the regmap API for some
reason, a lot of it due to new devices with odd requirements that can
sensibly be handled here.
- Add support for buses implementing a custom reg_update_bits()
method in case the bus has a native operation for this.
- Support 16 bit register addresses in SMBus.
- Allow customization of the device attached to regmap-irq.
- Helpers for bitfield operations and per-port field initializations"
* tag 'regmap-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: provide helpers for simple bit operations
regmap: add helper for per-port regfield initialization
regmap-i2c: add 16-bit width registers support
regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro
regmap: Simplify implementation of the regmap_read_poll_timeout() macro
regmap: add reg_sequence helpers
regmap-irq: make it possible to add irq_chip do a specific device node
regmap: Add bus reg_update_bits() support
regmap: debugfs: check count when read regmap file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Infrastructure:
- Add notification support
New drivers:
- Baikal-T1 PVT sensor driver
- amd_energy driver to report energy counters
- Driver for Maxim MAX16601
- Gateworks System Controller
Various:
- applesmc: avoid overlong udelay()
- dell-smm: Use one DMI match for all XPS models
- ina2xx: Implement alert functions
- lm70: Add support for ACPI
- lm75: Fix coding-style warnings
- lm90: Add max6654 support to lm90 driver
- nct7802: Replace container_of() API
- nct7904: Set default timeout
- nct7904: Add watchdog function
- pmbus: Improve initialization of 'currpage' and 'currphase'"
* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
hwmon: Add Baikal-T1 PVT sensor driver
hwmon: Add notification support
dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
hwmon: (applesmc) avoid overlong udelay()
hwmon: (nct7904) Set default timeout
hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
MAINTAINERS: add entry for AMD energy driver
hwmon: (amd_energy) Add documentation
hwmon: Add amd_energy driver to report energy counters
hwmon: (nct7802) Replace container_of() API
hwmon: (lm90) Add max6654 support to lm90 driver
hwmon : (nct6775) Use kobj_to_dev() API
hwmon: (pmbus) Driver for Maxim MAX16601
hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
hwmon: (adt7411) update contact email
hwmon: (lm75) Fix all coding-style warnings on lm75 driver
hwmon: Reduce indentation level in __hwmon_device_register()
hwmon: (ina2xx) Implement alert functions
hwmon: (lm70) Add support for ACPI
hwmon: (dell-smm) Use one DMI match for all XPS models
...
|
|
Pull tpm updates from Jarkko Sakkinen.
* tag 'tpmdd-next-20200522' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: eventlog: Replace zero-length array with flexible-array member
tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID
|
|
|
|
|
|
Fixes: 4ffea5e083f8 ("regulator: max8998: Add charger regulator")
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200530130314.GA73557@d7d8dbfb64ff
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
This introduces mtdpstore, which is similar to mtdoops but more
powerful. It uses pstore/blk, and aims to store panic and oops logs to
a flash partition, where pstore can later read back and present as files
in the mounted pstore filesystem.
To make mtdpstore work, the "blkdev" of pstore/blk should be set
as MTD device name or MTD device number. For more details, see
Documentation/admin-guide/pstore-blk.rst
This solves a number of issues:
- Work duplication: both of pstore and mtdoops do the same job storing
panic/oops log. They have very similar logic, registering to kmsg
dumper and storing logs to several chunks one by one.
- Layer violations: drivers should provides methods instead of polices.
MTD should provide read/write/erase operations, and allow a higher
level drivers to provide the chunk management, kmsg dump
configuration, etc.
- Missing features: pstore provides many additional features, including
presenting the logs as files, logging dump time and count, and
supporting other frontends like pmsg, console, etc.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/
Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
|
|
Now that pstore_register() can correctly pass max_reason to the kmesg
dump facility, introduce a new "max_reason" module parameter and
"max-reason" Device Tree field.
The "dump_oops" module parameter and "dump-oops" Device
Tree field are now considered deprecated, but are now automatically
converted to their corresponding max_reason values when present, though
the new max_reason setting has precedence.
For struct ramoops_platform_data, the "dump_oops" member is entirely
replaced by a new "max_reason" member, with the only existing user
updated in place.
Additionally remove the "reason" filter logic from ramoops_pstore_write(),
as that is not specifically needed anymore, though technically
this is a change in behavior for any ramoops users also setting the
printk.always_kmsg_dump boot param, which will cause ramoops to behave as
if max_reason was set to KMSG_DUMP_MAX.
Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
|
|
|
|
|
|
ColdFire is a big-endian cpu with a big-endian dspi hw module,
so, it uses native access, but memcpy breaks the endianness.
So, if i understand properly, by native copy we would mean
be(cpu)->be(dspi) or le(cpu)->le(dspi) accesses, so my fix
shouldn't break anything, but i couldn't test it on LS family,
so every test is really appreciated.
Fixes: 53fadb4d90c7 ("spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics")
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200529195756.184677-1-angelo.dureghello@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Two build fixes for issues introduced during the merge window
- A fix for a reference count leak in an error path of
iommu_group_alloc()
* tag 'iommu-fixes-v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix reference count leak in iommu_group_alloc.
x86: Hide the archdata.iommu field behind generic IOMMU_API
ia64: Hide the archdata.iommu field behind generic IOMMU_API
|
|
Pull block fixes from Jens Axboe:
"Two small fixes:
- Revert a block change that mixed up the return values for non-mq
devices
- NVMe poll race fix"
* tag 'block-5.7-2020-05-29' of git://git.kernel.dk/linux-block:
Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT"
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
|
|
Pull rdma fixes from Jason Gunthorpe:
"Nothing profound here, just a last set of long standing bug fixes:
- Incorrect error unwind in qib and pvrdma
- User triggerable NULL pointer crash in mlx5 with ODP prefetch
- syzkaller RCU race in uverbs
- Rare double free crash in ipoib"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode
RDMA/core: Fix double destruction of uobject
RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()
RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work
IB/qib: Call kobject_put() when kobject_init_and_add() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix use-after-free issue for rpmb partition
MMC host:
- Fix quirk for broken CQE support"
* tag 'mmc-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: block: Fix use-after-free issue for rpmb
mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two fixes for the new SM8150 and SM8250 Qualcomm clk drivers to fix a
randconfig build error and an incorrect parent mapping"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Fix parent for gpll0_out_even
clk: qcom: sm8250 gcc depends on QCOM_GDSC
|
|
The drivers reports EINVAL to userspace through netlink on invalid meta
match. This is confusing since EINVAL is usually reserved for malformed
netlink messages. Replace it by more meaningful codes.
Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of
MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH.
Without this change mlx5 fails to compile if user disables MLX5_ESWITCH
without also manually disabling MLX5_TC_CT.
Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling
adaptive moderation, in order to select the proper default values.
In order to do so, we separate the logic of selecting the moderation values
and setting moderion mode (CQE/EQE based).
Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ")
Fixes: 9908aa292971 ("net/mlx5e: CQE based moderation")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Change type of active_fec to u32 to match the type expected by
mlx5e_get_fec_mode. Copy active_fec and configured_fec values to
unsigned long before preforming bitwise manipulations.
Take the same approach when configuring FEC over 50G link modes: copy
the policy into an unsigned long and only than preform bitwise
operations.
Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
On tunnel decap rule insertion, the indirect mechanism will attempt to
offload the rule on all uplink representors which will trigger the
"devices are not on same switch HW, can't offload forwarding" message
for the uplink which isn't on the same switch HW as the VF representor.
The above flow is valid and shouldn't cause warning message,
fix by removing the warning and only report this flow using extack.
Fixes: 321348475d54 ("net/mlx5e: Fix allowed tc redirect merged eswitch offload cases")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
It's bytes, packets, lastused.
Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently a Linux system with the mlx5 NIC always crashes upon
hibernation - suspend/resume.
Add basic callbacks so the NIC could be suspended and resumed.
Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core")
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Pull drm fixes from Dave Airlie:
"A couple of amdgpu fixes and minor ingenic fixes:
amdgpu:
- display atomic test fix
- Fix soft hang in display vupdate code
ingenic:
- fix pointer cast
- fix crtc atomic check callback"
* tag 'drm-fixes-2020-05-29-1' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
gpu/drm: Ingenic: Fix opaque pointer casted to wrong type
gpu/drm: ingenic: Fix bogus crtc_atomic_check callback
|
|
It's better to understand what bits are set for DMA and for IRQ handling
in mid_spi_dma_setup() if they are grouped accordingly. Thus,
refactor mid_spi_dma_setup() to separate DMA and IRQ configuration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200529183150.44149-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 2afccbd283ae ("spi: dw: Discard static DW DMA slave structures")
did a clean up of global variables, which is fine, but messed up with
the carefully provided information in the custom DMA slave structures.
There reader can find an assignment of the DMA request lines in use.
Partially revert the above mentioned commit to restore readability
and maintainability of the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200529183150.44149-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit ecfbd3cf3b8b since Lukas Wunner noticed that we
start operating on the hardware before we check to see if this is a
spurious interrupt.
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Semin <Sergey.Semin@baikalelectronics.ru>:
Baikal-T1 SoC provides a DW DMA controller to perform low-speed peripherals
Mem-to-Dev and Dev-to-Mem transaction. This is also applicable to the DW
APB SSI devices embedded into the SoC. Currently the DMA-based transfers
are supported by the DW APB SPI driver only as a middle layer code for
Intel MID/Elkhart PCI devices. Seeing the same code can be used for normal
platform DMAC device we introduced a set of patches to fix it within this
series.
First of all we need to add the Tx and Rx DMA channels support into the DW
APB SSI binding. Then there are several fixes and cleanups provided as a
initial preparation for the Generic DMA support integration: add Tx/Rx
finish wait methods, clear DMAC register when done or stopped, Fix native
CS being unset, enable interrupts in accordance with DMA xfer mode,
discard static DW DMA slave structures, discard unused void priv pointer
and dma_width member of the dw_spi structure, provide the DMA Tx/Rx burst
length parametrisation and make sure it's optionally set in accordance
with the DMA max-burst capability.
In order to have the DW APB SSI MMIO driver working with DMA we need to
initialize the paddr field with the physical base address of the DW APB SSI
registers space. Then we unpin the Intel MID specific code from the
generic DMA one and placed it into the spi-dw-pci.c driver, which is a
better place for it anyway. After that the naming cleanups are performed
since the code is going to be used for a generic DMAC device. Finally the
Generic DMA initialization can be added to the generic version of the
DW APB SSI IP.
Last but not least we traditionally convert the legacy plain text-based
dt-binding file with yaml-based one and as a cherry on a cake replace
the manually written DebugFS registers read method with a ready-to-use
for the same purpose regset32 DebugFS interface usage.
This patchset is rebased and tested on the spi/for-next (5.7-rc5):
base-commit: fe9fce6b2cf3 ("Merge remote-tracking branch 'spi/for-5.8' into spi-next")
Link: https://lore.kernel.org/linux-spi/20200508132943.9826-1-Sergey.Semin@baikalelectronics.ru/
Changelog v2:
- Rebase on top of the spi repository for-next branch.
- Move bindings conversion patch to the tail of the series.
- Move fixes to the head of the series.
- Apply as many changes as possible to be applied the Generic DMA
functionality support is added and the spi-dw-mid is moved to the
spi-dw-dma driver.
- Discard patch "spi: dw: Fix dma_slave_config used partly uninitialized"
since the problem has already been fixed.
- Add new patch "spi: dw: Discard unused void priv pointer".
- Add new patch "spi: dw: Discard dma_width member of the dw_spi structure".
n_bytes member of the DW SPI data can be used instead.
- Build the DMA functionality into the DW APB SSI core if required instead
of creating a separate kernel module.
- Use conditional statement instead of the ternary operator in the ref
clock getter.
Link: https://lore.kernel.org/linux-spi/20200515104758.6934-1-Sergey.Semin@baikalelectronics.ru/
Changelog v3:
- Use spi_delay_exec() method to wait for the DMA operation completion.
- Explicitly initialize the dw_dma_slave members on stack.
- Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
setting from the patch where we just add the default burst length
constants.
- Use min() method to calculate the optimal burst values.
- Add new patch which moves the spi-dw.c source file to spi-dw-core.c in
order to preserve the DW APB SSI core driver name.
- Add commas in the debugfs_reg32 structure initializer and after the last
entry of the dw_spi_dbgfs_regs array.
Link: https://lore.kernel.org/linux-spi/20200521012206.14472-1-Sergey.Semin@baikalelectronics.ru
Changelog v4:
- Get back ndelay() method to wait for an SPI transfer completion.
spi_delay_exec() isn't suitable for the atomic context.
Link: https://lore.kernel.org/linux-spi/20200522000806.7381-1-Sergey.Semin@baikalelectronics.ru
Changelog v5:
- Refactor the Tx/Rx DMA-based SPI transfers wait methods.
- Add a new patch "spi: dw: Set xfer effective_speed_hz".
- Add a new patch "spi: dw: Return any value retrieved from the
dma_transfer callback" as a preparation patch before implementing
the local DMA, Tx SPI and Rx SPI transfers wait methods.
- Add a new patch "spi: dw: Locally wait for the DMA transactions
completion", which provides a local DMA transaction complete
method
- Create a dedicated patch which adds the Rx-done wait method:
"spi: dw: Add SPI Rx-done wait method to DMA-based transfer".
- Add more detailed description of the problems the Tx/Rx-wait
methods-related patches fix.
- Wait for the SPI Tx and Rx transfers being finished in the
mid_spi_dma_transfer() method executed in the task context.
- Use spi_delay_exec() to wait for the SPI Tx/Rx completion, since now
the driver calls the wait methods in the kernel thread context.
- Use SPI_DELAY_UNIT_SCK spi_delay unit for Tx-wait delay, since SPI
xfer's are now have the effective_speed_hz initialized.
- Rx-wait for a delay correlated with the APB/SSI synchronous clock
rate instead of using the SPI bus clock rate.
Link: https://lore.kernel.org/linux-spi/20200529035915.20790-1-Sergey.Semin@baikalelectronics.ru
Changelog v6:
- Provide a more detailed description of the patch:
2901db35bea1 ("spi: dw: Locally wait for the DMA transfers completion")
- Calculate the Rx delay with better accuracy by moving 4-multiplication
to the head of the formulae:
ns = 4U * NSEC_PER_SEC / dws->max_freq * nents.
Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Cc: Ekaterina Skachko <Ekaterina.Skachko@baikalelectronics.ru>
Cc: Vadim Vlasov <V.Vlasov@baikalelectronics.ru>
Cc: Alexey Kolotnikov <Alexey.Kolotnikov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Serge Semin (16):
spi: dw: Set xfer effective_speed_hz
spi: dw: Return any value retrieved from the dma_transfer callback
spi: dw: Locally wait for the DMA transfers completion
spi: dw: Add SPI Tx-done wait method to DMA-based transfer
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Fix Rx-only DMA transfers
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Use regset32 DebugFS method to create regdump file
dt-bindings: spi: Convert DW SPI binding to DT schema
.../bindings/spi/snps,dw-apb-ssi.txt | 44 --
.../bindings/spi/snps,dw-apb-ssi.yaml | 127 +++++
.../devicetree/bindings/spi/spi-dw.txt | 24 -
drivers/spi/Kconfig | 15 +-
drivers/spi/Makefile | 5 +-
drivers/spi/{spi-dw.c => spi-dw-core.c} | 95 ++--
drivers/spi/spi-dw-dma.c | 482 ++++++++++++++++++
drivers/spi/spi-dw-mid.c | 382 --------------
drivers/spi/spi-dw-mmio.c | 4 +
drivers/spi/spi-dw-pci.c | 50 +-
drivers/spi/spi-dw.h | 20 +-
11 files changed, 719 insertions(+), 529 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt
rename drivers/spi/{spi-dw.c => spi-dw-core.c} (82%)
create mode 100644 drivers/spi/spi-dw-dma.c
delete mode 100644 drivers/spi/spi-dw-mid.c
--
2.26.2
|
|
Add mechanism to get the reset control and deassert it in order to bring
the IP out of reset.
Signed-off-by: Liang Jin J <liang.j.jin@ericsson.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20200529155806.16758-1-dinguyen@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
bcm2711, Rasberry Pi 4's SoC, shares one interrupt for multiple
instances of the bcm2835 SPI controller. So this enables shared
interrupt support for them.
The early bail out in the interrupt routine avoids messing with buffers
of transfers being done by other means. Otherwise, the driver can handle
receiving interrupts asserted by other controllers during an IRQ based
transfer.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200528185805.28991-1-nsaenzjulienne@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure we clear the FIFOs, stop the block, disable the clock and
release the DMA channel.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200528190605.24850-1-f.fainelli@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new trace points for the start and end of enabling bypass on a
regulator, to allow monitoring of when regulators are moved into bypass
and how long that takes.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200529152216.9671-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
