summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-09-22serial: xuartps: Do not enable parity error interruptAnirudha Sarangi1-2/+15
The patch makes changes not to enable parity error interrupt. With the current implementation, each parity error results in two distinct interrupts (almost always). The first one is normal parity error interrupt with no data in the fifo and the second one is a proper Rx interrupt with the received data in the fifo. By disabling parity error interrupt we still ensure handling of parity errors as for the Rx fifo interrupt the parity error still shows up in the interrupt status register. Considering the fact that the by default INPCK and IGNPAR are not set, this is the optimal implementation for parity error handling. Signed-off-by: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [stelford@cadence.com: cherry picked from https://github.com/Xilinx/linux-xlnx commit bf9f610b445e2c9ed33c41e1e0e30b43be4e1f97 with manual conflict resolution] Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: fix uart enable managementAlexandre TORGUE1-1/+5
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: fix spin_lock managementAlexandre TORGUE1-0/+4
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: adding dma supportAlexandre TORGUE2-25/+378
This patch adds dma mode support for rx and tx with pio mode as fallback in case of dma error. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: clock disabling managementAlexandre TORGUE1-2/+3
Keep the clock enabled at the end of stm32_init_port but disable it in stm32_serial_remove. Note that stm32_pm function is there to manage the clock at runtime. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: correct flow control property spellingAlexandre TORGUE1-1/+1
"st,hw-flow-ctrl" property is documented in device tree binding whereas "auto-flow-control" was used in the code. The driver is now aligned with the binding name "st,hw-flow-ctrl". Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: disable tx and rx during shutdownAlexandre TORGUE1-1/+1
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: header file creationAlexandre TORGUE2-208/+216
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: adding support for stm32f7Alexandre TORGUE1-50/+219
Register offset management rework to support both stm32f4 (default) and stm32f7. Driver rework to ensure same functional level on both stm32f4 and stm32f7: no new feature in this version yet. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty: serial: xuartps: Wait for rx and tx reset done statusNava kishore Manne1-0/+8
After issuing the reset, driver is not checking the rx and tx reset done status. So, modified driver to wait for the reset done status. Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: xuartps: Adds RXBS register support for zynqmpNava kishore Manne1-20/+81
This patch adds RXBS register access support for zynqmp. To avoid the corner error conditions it will consider only RXBS[2:0] bits while checking the error conditions (Parity,Framing and BRAK). Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty/serial/8250: Touch NMI watchdog in wait_for_xmitrJiri Olsa1-0/+1
First loop in wait_for_xmitr could also trigger NMI watchdog in case reading from the port is slow: PID: 0 TASK: ffffffff819c1460 CPU: 0 COMMAND: "swapper/0" #0 [ffff88019f405e58] crash_nmi_callback at ffffffff8104d382 #1 [ffff88019f405e68] nmi_handle at ffffffff8168ead9 #2 [ffff88019f405eb0] do_nmi at ffffffff8168ec53 #3 [ffff88019f405ef0] end_repeat_nmi at ffffffff8168df13 [exception RIP: delay_tsc+50] RIP: ffffffff81325642 RSP: ffff88019f403bb0 RFLAGS: 00000083 RAX: 00000000000005c8 RBX: ffffffff81f83000 RCX: 0000024e4fb88a8b RDX: 0000024e4fb89053 RSI: 0000000000000000 RDI: 00000000000007d1 RBP: ffff88019f403bb0 R8: 000000000000000a R9: 0000000000000000 R10: 0000000000000000 R11: ffff88019f403ad6 R12: 000000000000250f R13: 0000000000000020 R14: ffffffff81d360c7 R15: 0000000000000047 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #4 [ffff88019f403bb0] delay_tsc at ffffffff81325642 #5 [ffff88019f403bb8] __const_udelay at ffffffff813255a8 #6 [ffff88019f403bc8] wait_for_xmitr at ffffffff81404390 #7 [ffff88019f403bf0] serial8250_console_putchar at ffffffff8140455c #8 [ffff88019f403c10] uart_console_write at ffffffff813ff00a #9 [ffff88019f403c40] serial8250_console_write at ffffffff814044ae #10 [ffff88019f403c88] call_console_drivers.constprop.15 at ffffffff81086b01 #11 [ffff88019f403cb0] console_unlock at ffffffff8108842f #12 [ffff88019f403ce8] vprintk_emit at ffffffff81088834 #13 [ffff88019f403d58] vprintk_default at ffffffff81088ba9 #14 [ffff88019f403d68] printk at ffffffff8167f034 Adding touch_nmi_watchdog call to the first loop as well. Reported-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: 8250_pci: Use symbolic constants for EXAR's MPIO registersJan Kiszka1-21/+34
Less magic that only requires comments. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty: amba-pl011: uart_amba_port is not available with earlycon functionShawn Guo1-4/+1
Commit 0e125a5facf8 ("tty: amba-pl011: define flag register bits for ZTE device") changes earlycon function pl011_putc() to use a pointer to uart_amba_port. This causes a regression when earlycon is enabled, because uart_amba_port is not available yet at earlycon time. Let's revert the change on pl011_putc() to fix the regression. The earlycon support for ZTE device can probably be added later by declaring a new earlycon setup function with a vendor specific compatible. Reported-by: Sudeep Holla <sudeep.holla@arm.com> Fixes: 0e125a5facf8 ("tty: amba-pl011: define flag register bits for ZTE device") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: mxs-auart: Fix missing clk_disable_unprepare() on error in ↵Wei Yongjun1-1/+1
mxs_get_clks() Commit 5d7519dfc963 ("serial: mxs-auart: Disable clock on error path") try to disable clock on error path, but still missing the clk_set_rate() error handling path. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Emulate \e[100-107m (bright background colors).Adam Borowski1-2/+3
For now, these fall back to regular (dark) colors. It'd be tempting to replace blink with bright backgrounds, as permitted by CGA/VGA -- we already muck with the other programmable bit (foreground brightness vs 512 character font). This would bring vgacon in line with fbcon, which doesn't support blink anywhere but on some drivers renders that bit as bright background. If that is done, this commit should be amended to be one of ways of setting that bit. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Support \e[90-97m (bright foreground colors).Adam Borowski1-0/+4
These codes are supported by all major terminals, thus they occasionally see some use despite being redundant with \e[38;5;(x+8)m or (less exactly) \e[1;3(x)m. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Drop a no longer true comment.Adam Borowski1-2/+2
Some guy went on a patching spree, adding 24-bit colour support all around: https://gist.github.com/XVilka/8346728 Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Make a comparison <= for readability.Adam Borowski1-1/+1
All other uses of vc_npar are inclusive (save for < NPAR) which raises eyebrows, so let's at least do so consistently. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Fix a read-past-array in vc_t416_color().Adam Borowski1-1/+1
This makes it show up on UBSAN: perl -e 'for (0..15) {my @x=("0")x$_;push @x,qw(38 2 64 128 192 4);printf "\e[%smAfter %d zeroes.\e[0m\n", join(";",@x[0..($_+5<15?$_+5:15)]), $_}' Seems harmless: if you can programmatically read attributes of a vt character (/dev/vcsa*), multiple probes can obtain parts of vt_mode then lowest byte (5th on 64-bit big-endian) of a pointer. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15pty: make ptmx file ops read-only after initKees Cook1-1/+1
The ptmx_fops structure is only changed during init, so mark it as such. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15serial: imx: Replace dmaengine old APIFabien Lahoudere1-4/+4
dmaengine_terminate_all() is deprecated and should be replaced by dmaengine_terminate_sync() in non-atomic context or dmaengine_terminate_async() with dmaengine_synchronize(). See commit b36f09c3c441 ("dmaengine: Add transfer termination synchronization support") Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15serial: core: fix potential NULL pointer dereferenceAndy Shevchenko1-3/+3
The commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") refactored uart_close() to use tty_port_close(). At the same time it introduced a potential NULL pointer dereference. Rearrange the code to avoid kernel crash. Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Cc: Rob Herring <robh@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15BUG: atmel_serial: Interrupts not disabled on closeRichard Genoud1-2/+3
Since commit 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio"), interrupts from GPIOs are not disabled any more when the serial port is closed, leading to an oops when the one of the input pin is toggled (CTS/DSR/DCD/RNG). This is only the case if those pins are used as GPIOs, i.e. declared like that: usart1: serial@f8020000 { /* CTS and DTS will be handled by GPIO */ status = "okay"; rts-gpios = <&pioB 17 GPIO_ACTIVE_LOW>; cts-gpios = <&pioB 16 GPIO_ACTIVE_LOW>; dtr-gpios = <&pioB 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&pioC 31 GPIO_ACTIVE_LOW>; rng-gpios = <&pioB 12 GPIO_ACTIVE_LOW>; dcd-gpios = <&pioB 15 GPIO_ACTIVE_LOW>; }; That's because modem interrupts used to be freed in atmel_shutdown(). After commit 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio"), this code was just removed. Calling atmel_disable_ms() disables the interrupts and everything works fine again. Tested on at91sam9g35-cm (This patch doesn't apply on -stable kernels, fixes for 4.4 and 4.7 will be sent after this one is applied.) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Fixes: 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15tty: serial: fsl_lpuart: use GFP_ATOMIC under spin lockWei Yongjun1-1/+1
The function lpuart_start_rx_dma() is called from several places, in some of which, such as lpuart_startup(), a lock be held here, so we should use GFP_ATOMIC when a lock is held. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULLLiu Xiang1-1/+1
When dev.of_node is not NULL, we also need to set IRQF_TRIGGER_FALLING flag, otherwise it may cause uncertain interrupts. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: mxs-auart: Use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun1-4/+1
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: mxs-auart: Disable clock on error pathFabio Estevam1-1/+5
We should disable the previously acquired clock when enabling s->clk fails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: core: Fix handling of options after MMIO addressAlexander Sverdlin1-8/+6
Guenter Roeck reported a regression caused by commit "serial: earlycon: Extend earlycon command line option to support 64-bit addresses": console= and earlycon= options have the following format: ...,<addr>,<options> Historically used here simple_strtoul() had no problems with comma, but the new and recommended kstrtoull() requires null-terminated string and returns -EINVAL in case there are "options" at the end. There is no recommended to use function currently that will support it, so stick to obsolete simple_strtoull() variant. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: imx: add error messages when .probe failsUwe Kleine-König1-4/+14
Some functions called by serial_imx_probe emit an error message themself (like kmalloc() and friends). clk_prepare_enable() and devm_request_irq() however don't which might make the driver silently fail to probe. So add an error message for these. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05Merge 4.8-rc5 into tty-nextGreg Kroah-Hartman384-2241/+4834
We want the fixes in here for merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixlet from the timers departement: - A fix for scheduler stalls in the tick idle code affecting NOHZ_FULL kernels - A trivial compile fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Fix softlockup on scheduler stalls in kvm guest clocksource/drivers/atmel-pit: Fix compilation error
2016-09-03Merge tag 'dm-4.8-fixes-4' of ↵Linus Torvalds3-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix in both DM crypt and DM log-writes for too large bios (as generated by bcache) - two other stable fixes for DM log-writes - a stable fix for a DM crypt bug that could result in freeing pointers from uninitialized memory in the tfm allocation error path - a DM bufio cleanup to discontinue using create_singlethread_workqueue() * tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: remove use of deprecated create_singlethread_workqueue() dm crypt: fix free of bad values after tfm allocation failure dm crypt: fix error with too large bios dm log writes: fix check of kthread_run() return value dm log writes: fix bug with too large bios dm log writes: move IO accounting earlier to fix error path
2016-09-03Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and arm/perf fixes: - arm64 fix: debug exception unmasking on the CPU resume path - ARM PMU fixes: memory leak on error path and NULL pointer dereference" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1 drivers/perf: arm_pmu: Fix NULL pointer dereference during probe drivers/perf: arm_pmu: Fix leak in error path
2016-09-03Merge tag 'char-misc-4.8-rc5' of ↵Linus Torvalds10-279/+25
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver
2016-09-03Merge tag 'staging-4.8-rc5' of ↵Linus Torvalds28-114/+174
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits) arm: dts: rockchip: add reset node for the exist saradc SoCs arm64: dts: rockchip: add reset saradc node for rk3368 SoCs iio: adc: rockchip_saradc: reset saradc controller before programming it iio: accel: kxsd9: Fix raw read return iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access include/linux: fix excess fence.h kernel-doc notation staging: wilc1000: correctly check if associatedsta has not been found staging: wilc1000: NULL dereference on error staging: wilc1000: txq_event: Fix coding error MAINTAINERS: Add file patterns for ion device tree bindings MAINTAINERS: Update maintainer entry for wilc1000 iio: chemical: atlas-ph-sensor: fix typo in val assignment iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility staging: comedi: dt2811: fix a precedence bug staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. staging: comedi: ni_mio_common: fix wrong insn_write handler staging: comedi: comedi_test: fix timer race conditions staging: comedi: daqboard2000: bug fix board type matching code ...
2016-09-03Merge tag 'tty-4.8-rc5' of ↵Linus Torvalds8-70/+159
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 4.8-rc5. One fixes an oft-reported build issue with the fintek driver, another reverts a patch that was causing problems, one fixes a crash, and some new device ids were added. All of these have been in linux-next for a while" * tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: added acces i/o products quad and octal serial cards serial: 8250_mid: fix divide error bug if baud rate is 0 Revert "tty/serial/8250: use mctrl_gpio helpers" 8250/fintek: rename IRQ_MODE macro
2016-09-03Merge tag 'usb-4.8-rc5' of ↵Linus Torvalds22-57/+141
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some USB and PHY driver fixes for 4.8-rc5 Nothing major, lots of little fixes for reported bugs, and a build fix for a missing .h file that the phy drivers needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: musb: Fix locking errors for host only mode usb: dwc3: gadget: always decrement by 1 usb: dwc3: debug: fix ep name on trace output usb: gadget: udc: core: don't starve DMA resources USB: serial: option: add WeTelecom 0x6802 and 0x6803 products USB: avoid left shift by -1 USB: fix typo in wMaxPacketSize validation usb: gadget: Add the gserial port checking in gs_start_tx() usb: dwc3: gadget: don't rely on jiffies while holding spinlock usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame() usb: gadget: function: f_rndis: socket buffer may be NULL usb: gadget: function: f_eem: socket buffer may be NULL usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe() usb: dwc2: Add reset control to dwc2 usb: dwc3: core: allow device to runtime_suspend several times usb: dwc3: pci: runtime_resume child device USB: serial: option: add WeTelecom WM-D200 usb: chipidea: udc: don't touch DP when controller is in host mode USB: serial: mos7840: fix non-atomic allocation in write path USB: serial: mos7720: fix non-atomic allocation in write path ...
2016-09-02Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds7-33/+53
Pull block fixes from Jens Axboe: "A collection of fixes for the nvme over fabrics code" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-rdma: Get rid of redundant defines nvme-rdma: Get rid of duplicate variable nvme: fabrics drivers don't need the nvme-pci driver nvme-fabrics: get a reference when reusing a nvme_host structure nvme-fabrics: change NQN UUID to big-endian format nvme-loop: set sqsize to 0-based value, per spec nvme-rdma: fix sqsize/hsqsize per spec fabrics: define admin sqsize min default, per spec nvmet-rdma: +1 to *queue_size from hsqsize/hrqsize nvmet-rdma: Fix use after free nvme-rdma: initialize ret to zero to avoid returning garbage
2016-09-02Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM bugfix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: invalid self test error message
2016-09-03tpm: invalid self test error messageJarkko Sakkinen1-2/+1
The driver emits invalid self test error message even though the init succeeds. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Fixes: cae8b441fc20 ("tpm: Factor out common startup code") Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-09-02Merge tag 'acpi-4.8-rc5' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes ffrom Rafael Wysocki: "Two stable-candidate fixes for the ACPI early device probing code added during the 4.4 cycle, one fixing a typo in a stub macro used when CONFIG_ACPI is unset and one that prevents sleeping functions from being called under a spinlock (Lorenzo Pieralisi)" * tag 'acpi-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / drivers: replace acpi_probe_lock spinlock with mutex ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
2016-09-02Merge tag 'pm-4.8-rc5' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "This includes a stable-candidate cpufreq-dt driver problem fix and annotations of tracepoints in the runtime PM framework. Specifics: - Fix the definition of the cpufreq-dt driver's machines table introduced during the 4.7 cycle that should be NULL-terminated, but the termination entry is missing from it (Wei Yongjun). - Annotate tracepoints in the runtime PM framework's core so as to allow the functions containing them to be called from the idle code path without causing RCU to complain about illegal usage (Paul McKenney)" * tag 'pm-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle cpufreq: dt: Add terminate entry for of_device_id tables
2016-09-02Merge branches 'pm-cpufreq-fixes' and 'pm-core-fixes'Rafael J. Wysocki1-5/+5
* pm-cpufreq-fixes: cpufreq: dt: Add terminate entry for of_device_id tables * pm-core-fixes: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle
2016-09-02ACPI / drivers: replace acpi_probe_lock spinlock with mutexLorenzo Pieralisi1-3/+3
Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-02drivers/perf: arm_pmu: Fix NULL pointer dereference during probeStefan Wahren1-1/+1
Patch 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking interrupt-affinity property") unintended also fixes perf_event support for bcm2835 which doesn't have PMU interrupts. Unfortunately this change introduce a NULL pointer dereference on bcm2835, because irq_is_percpu always expected to be called with a valid IRQ. So fix this regression by validating the IRQ before. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02drivers/perf: arm_pmu: Fix leak in error pathStefan Wahren1-0/+1
In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: fa8ad7889d83 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02Merge tag 'dmaengine-fix-4.8-rc5' of ↵Linus Torvalds5-17/+22
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "The fixes this time are all in drivers: - possible NULL dereference in img-mdc - correct device identity for free_irq in at_xdmac - missing of_node_put() in fsl probe - fix debug log and hotchain corner case for pxa-dma - fix checking hardware bits in isr in usb dmac" * tag 'dmaengine-fix-4.8-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: img-mdc: fix a possible NULL dereference dmaengine: at_xdmac: fix to pass correct device identity to free_irq() dmaengine: fsl_raid: add missing of_node_put() in fsl_re_probe() dmaengine: pxa_dma: fix debug message dmaengine: pxa_dma: fix hotchain corner case dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
2016-09-02Merge tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds14-31/+133
Pull drm fixes from Dave Airlie: "Contains fixes for imx, amdgpu, vc4, msm and one nouveau ACPI fix" * tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: record error code when ring test failed drm/amd/amdgpu: compute ring test fail during S4 on CI drm/amd/amdgpu: sdma resume fail during S4 on CI drm/nouveau/acpi: use DSM if bridge does not support D3cold drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02dmaengine: hsu: refactor hsu_dma_do_irq() to return intAndy Shevchenko3-12/+11
Since we have nice macro IRQ_RETVAL() we would use it to convert a flag of handled interrupt from int to irqreturn_t. The rationale of doing this is: a) hence we implicitly mark hsu_dma_do_irq() as an auxiliary function that can't be used as interrupt handler directly, and b) to be in align with serial driver which is using serial8250_handle_irq() that returns plain int by design. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-13 06:03:27 +0000