summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-01-06xen/events: use the FIFO-based ABI if availableDavid Vrabel4-1/+448
Implement all the event channel port ops for the FIFO-based ABI. If the hypervisor supports the FIFO-based ABI, enable it by initializing the control block for the boot VCPU and subsequent VCPUs as they are brought up and on resume. The event array is expanded as required when event ports are setup. The 'xen.fifo_events=0' command line option may be used to disable use of the FIFO-based ABI. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow event channel priority to be setDavid Vrabel1-0/+17
Add xen_irq_set_priority() to set an event channels priority. This function will only work with event channel ABIs that support priority (i.e., the FIFO-based ABI). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Add the hypervisor interface for the FIFO-based event channelsDavid Vrabel1-4/+4
Add the hypercall sub-ops and the structures for the shared data used in the FIFO-based event channel ABI. The design document for this new ABI is available here: http://xenbits.xen.org/people/dvrabel/event-channels-H.pdf In summary, events are reported using a per-domain shared event array of event words. Each event word has PENDING, LINKED and MASKED bits and a LINK field for pointing to the next event in the event queue. There are 16 event queues (with different priorities) per-VCPU. Key advantages of this new ABI include: - Support for over 100,000 events (2^17). - 16 different event priorities. - Improved fairness in event latency through the use of FIFOs. The ABI is available in Xen 4.4 and later. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/evtchn: support more than 4096 portsDavid Vrabel3-6/+14
Remove the check during unbind for NR_EVENT_CHANNELS as this limits support to less than 4096 ports. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add xen_evtchn_mask_all()David Vrabel1-7/+11
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Refactor evtchn_to_irq array to be dynamically allocatedDavid Vrabel3-55/+149
Refactor static array evtchn_to_irq array to be dynamically allocated by implementing get and set functions for accesses to the array. Two new port ops are added: max_channels (maximum supported number of event channels) and nr_channels (number of currently usable event channels). For the 2-level ABI, these numbers are both the same as the shared data structure is a fixed size. For the FIFO ABI, these will be different as the event array is expanded dynamically. This allows more than 65000 event channels so an unsigned short is no longer sufficient for an event channel port number and unsigned int is used instead. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add a evtchn_op for port setupDavid Vrabel2-1/+13
Add a hook for port-specific setup and call it from xen_irq_info_common_setup(). The FIFO-based ABIs may need to perform additional setup (expanding the event array) before a bound event channel can start to receive events. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow setup of irq_info to failDavid Vrabel1-65/+91
The FIFO-based event ABI requires additional setup of newly bound events (it may need to expand the event array) and this setup may fail. xen_irq_info_common_init() is a useful place to put this setup so allow this call to fail. This call and the other similar calls are renamed to be *_setup() to reflect that they may now fail. This failure can only occur with new event channels not on rebind. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add struct evtchn_ops for the low-level port operationsDavid Vrabel3-16/+84
evtchn_ops contains the low-level operations that access the shared data structures. This allows alternate ABIs to be supported. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move 2-level specific code into its own fileDavid Vrabel4-362/+440
In preparation for alternative event channel ABIs, move all the functions accessing the shared data structures into their own file. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move drivers/xen/events.c into drivers/xen/events/David Vrabel3-1/+5
events.c will be split into multiple files so move it into its own directory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: replace raw bit ops with functionsWei Liu1-2/+1
In preparation for adding event channel port ops, use set_evtchn() instead of sync_set_bit(). Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: introduce test_and_set_mask()Wei Liu1-3/+8
In preparation for adding event channel port ops, add test_and_set_mask(). Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: remove unnecessary init_evtchn_cpu_bindings()David Vrabel1-22/+0
Because the guest-side binding of an event to a VCPU (i.e., setting the local per-cpu masks) is always explicitly done after an event channel is bound to a port, there is no need to initialize all possible events as bound to VCPU 0 at start of day or after a resume. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: refactor retrigger_dynirq() and resend_irq_on_evtchn()David Vrabel1-18/+9
These two function did the same thing with different parameters, put the common bits in retrigger_evtchn(). This changes the return value of resend_irq_on_evtchn() but the only caller (in arch/ia64/xen/irq_xen.c) ignored the return value so this is fine. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/pci: Fix build on non-x86Ben Hutchings1-0/+2
We can't include <asm/pci_x86.h> if this isn't x86, and we only need it if CONFIG_PCI_MMCONFIG is enabled. Fixes: 8deb3eb1461e ('xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2014-01-06xen: simplify balloon_first_page() with list_first_entry_or_null()Jie Liu1-8/+1
Replace the code logic at balloon_first_page() by calling list_first_entry_or_null() directly. since here is only one user of that routine, therefore we can just remove it. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-06xen: balloon: enable for ARMIan Campbell1-1/+0
Since c275a57f5ec3 "xen/balloon: Set balloon's initial state to number of existing RAM pages" the balloon driver appears to work fine on ARM as far as I can tell. Prior to that commit it was broken because on ARM RAM doesn't typically start at zero, effectively leaving a big MMIO hole at the start. This would cause the balloon driver to give away all of RAM at start of day, which is rather inconvenient. It was already enabled (or rather not excluded) on ARM64. The c1d15f5c8bc1170dafe16e988e55437245966dfe "xen/balloon: Seperate the auto-translate logic properly (v2)" added in the proper plumbing to work with ARM and PVH type guests. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v2: Added the bit about PVH] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-03xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk7-4/+20
The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] CC: stable@vger.kernel.org
2013-12-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "There is a small EFI fix and a big power regression fix in this batch. My queue also had a fix for downing a CPU when there are insufficient number of IRQ vectors available, but I'm holding that one for now due to recent bug reports" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't select EFI from certain special ACPI drivers x86 idle: Repair large-server 50-watt idle-power regression
2013-12-29Merge tag 'pm+acpi-3.13-rc6' of ↵Linus Torvalds4-34/+50
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes and new device IDs from Rafael Wysocki: - Fix for a cpufreq regression causing stale sysfs files to be left behind during system resume if cpufreq_add_dev() fails for one or more CPUs from Viresh Kumar. - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be ignored when the intel_pstate driver is used from Jason Baron. - System suspend fix for a memory leak in pm_vt_switch_unregister() that forgot to release objects after removing them from pm_vt_switch_list. From Masami Ichikawa. - Intel Valley View device ID and energy unit encoding update for the (recently added) Intel RAPL (Running Average Power Limit) driver from Jacob Pan. - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power Subsystem (LPSS) ACPI driver from Paul Drews. * tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap / RAPL: add support for ValleyView Soc PM / sleep: Fix memory leak in pm_vt_switch_unregister(). cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers cpufreq: remove sysfs files for CPUs which failed to come back after resume ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs
2013-12-27Merge branches 'powercap' and 'acpi-lpss' with new device IDsRafael J. Wysocki3-2/+13
* powercap: powercap / RAPL: add support for ValleyView Soc * acpi-lpss: ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs
2013-12-27Merge branches 'pm-cpufreq' and 'pm-sleep' containing PM fixesRafael J. Wysocki1-32/+37
* pm-cpufreq: cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers cpufreq: remove sysfs files for CPUs which failed to come back after resume * pm-sleep: PM / sleep: Fix memory leak in pm_vt_switch_unregister().
2013-12-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds11-94/+189
Pull block fixes from Jens Axboe: - fix for a memory leak on certain unplug events - a collection of bcache fixes from Kent and Nicolas - a few null_blk fixes and updates form Matias - a marking of static of functions in the stec pci-e driver * 'for-linus' of git://git.kernel.dk/linux-block: null_blk: support submit_queues on use_per_node_hctx null_blk: set use_per_node_hctx param to false null_blk: corrections to documentation null_blk: warning on ignored submit_queues param null_blk: refactor init and init errors code paths null_blk: documentation null_blk: mem garbage on NUMA systems during init drivers: block: Mark the functions as static in skd_main.c bcache: New writeback PD controller bcache: bugfix for race between moving_gc and bucket_invalidate bcache: fix for gc and writeback race bcache: bugfix - moving_gc now moves only correct buckets bcache: fix for gc crashing when no sectors are used bcache: Fix heap_peek() macro bcache: Fix for can_attach_cache() bcache: Fix dirty_data accounting bcache: Use uninterruptible sleep in writeback bcache: kthread don't set writeback task to INTERUPTIBLE block: fix memory leaks on unplugging block device bcache: fix sparse non static symbol warning
2013-12-24Merge branch 'for-3.13-fixes' of ↵Linus Torvalds4-12/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "There's one interseting commit - "libata, freezer: avoid block device removal while system is frozen". It's an ugly hack working around a deadlock condition between driver core resume and block layer device removal paths through freezer which was made more reproducible by writeback being converted to workqueue some releases ago. The bug has nothing to do with libata but it's just an workaround which is easy to backport. After discussion, Rafael and I seem to agree that we don't really need kernel freezables - both kthread and workqueue. There are few specific workqueues which constitute PM operations and require freezing, which will be converted to use workqueue_set_max_active() instead. All other kernel freezer uses are planned to be removed, followed by the removal of kthread and workqueue freezer support, hopefully. Others are device-specific fixes. The most notable is the addition of NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro M500 SSDs which otherwise suffers data corruption" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata, freezer: avoid block device removal while system is frozen libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs libata: disable a disk via libata.force params ahci: bail out on ICH6 before using AHCI BAR ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
2013-12-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds5-15/+52
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Last batch of InfiniBand/RDMA changes for 3.13 / 2014: - Additional checks for uverbs to ensure forward compatibility, handle malformed input better. - Fix potential use-after-free in iWARP connection manager. - Make a function static" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Check access to userspace response buffer in extended command IB/uverbs: Check input length in flow steering uverbs IB/uverbs: Set error code when fail to consume all flow_spec items IB/uverbs: Check reserved fields in create_flow IB/uverbs: Check comp_mask in destroy_flow IB/uverbs: Check reserved field in extended command header IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA() IB/core: const'ify inbuf in struct ib_udata RDMA/iwcm: Don't touch cm_id after deref in rem_ref RDMA/cxgb4: Make _c4iw_write_mem_dma() static
2013-12-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-34/+93
Pull drm fixes from Dave Airlie: "Xmas fixes pull, all small nothing major, intel, radeon, one ttm regression, and one build fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: Fix swapin regression gpu: fix qxl missing crc32_le drm/radeon: fix asic gfx values for scrapper asics drm/i915: Use the correct GMCH_CTRL register for Sandybridge+ drm/radeon: check for 0 count in speaker allocation and SAD code drm/radeon/dpm: disable ss on Cayman drm/radeon/dce6: set correct number of audio pins drm/i915: get a PC8 reference when enabling the power well drm/i915: change CRTC assertion on LCPLL disable drm/i915: Fix erroneous dereference of batch_obj inside reset_status drm/i915: Prevent double unref following alloc failure during execbuffer
2013-12-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio balloon driver fixes from Rusty Russell: "Refactoring broke the balloon driver, and fixing kallsyms on ARM broke some (non-ARM) MMUless setups, so we're making that fix ARM-only for now. Unfortunately, the ARM refactoring which broke kallsyms/perf was CC:stable, so the fix (which broken non-ARM) was also CC:stable, so now the partial reversion is also CC:stable..." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts/link-vmlinux.sh: only filter kernel symbols for arm virtio_balloon: update_balloon_size(): update correct field
2013-12-23Merge branches 'cxgb4', 'flowsteer' and 'misc' into for-linusRoland Dreier4-14/+51
2013-12-23Merge tag 'drm-intel-fixes-2013-12-18' of ↵Dave Airlie4-23/+60
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Besides the 2 fixes for tricky corner cases in gem from Chris I've promised already two patche from Paulo to fix pc8 warnings (both ported from -next, bug report from Dave Jones) and one patch from to fix vga enable/disable on snb+. That one is a really old bug, but apparently it can cause machine hangs if you try hard enough with vgacon/efifb handover. * tag 'drm-intel-fixes-2013-12-18' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Use the correct GMCH_CTRL register for Sandybridge+ drm/i915: get a PC8 reference when enabling the power well drm/i915: change CRTC assertion on LCPLL disable drm/i915: Fix erroneous dereference of batch_obj inside reset_status drm/i915: Prevent double unref following alloc failure during execbuffer
2013-12-23Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie4-9/+29
into drm-fixes - fix for a long standing corruption bug on some Trinity/Richland parts. - Stability fix for cayman dpm - audio fixes for dce6+ * 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix asic gfx values for scrapper asics drm/radeon: check for 0 count in speaker allocation and SAD code drm/radeon/dpm: disable ss on Cayman drm/radeon/dce6: set correct number of audio pins
2013-12-23drm/ttm: Fix swapin regressionThomas Hellstrom1-1/+2
Commit "drm/ttm: Don't move non-existing data" didn't take the swapped-out corner case into account. This patch corrects that. Fixes blank screen after attempted suspend / hibernate on vmwgfx. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-23gpu: fix qxl missing crc32_leRandy Dunlap2-1/+2
Fix build error: qxl uses crc32 functions so it needs to select CRC32. Also use angle quotes around a kernel header file name. drivers/built-in.o: In function `qxl_display_read_client_monitors_config': (.text+0x19d754): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Much smaller batch of fixes this week. Biggest one is a revert of an OMAP display change that removed some non-DT pinmux code that was still needed for 3.13 to get DSI displays to work. There's also a fix that resolves some misdescribed GPIO controller resources on shmobile. The rest are mostly smaller fixes, a couple of MAINTAINERS updates, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Revert "ARM: OMAP2+: Remove legacy mux code for display.c" MAINTAINERS: Add keystone clock drivers MAINTAINERS: Add keystone git tree information ARM: s3c64xx: dt: Fix boot failure due to double clock initialization ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
2013-12-22Merge tag 'firewire-fix' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixlet from Stefan Richter: "A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12. Buggy targets which could malfunction when being subjected to this command are already sufficiently protected by a scsi_level check in sd + SCSI core" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: bring back WRITE SAME support
2013-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds9-45/+51
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor items this time around, the most notable being a FILEIO backend change to enforce hw_max_sectors based upon the current block_size to address a bug where large sized I/Os (> 1M) where being rejected" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment qla2xxx: Fix schedule_delayed_work() for target timeout calculations iser-target: fix error return code in isert_create_device_ib_res() iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set target: Remove write-only stats fields and lock from struct se_node_acl iscsi-target: return -EINVAL on oversized configfs parameter
2013-12-22powercap / RAPL: add support for ValleyView SocJacob Pan1-2/+11
This patch adds support for RAPL on Intel ValleyView based SoC platforms, such as Baytrail. Besides adding CPU ID, special energy unit encoding is handled for ValleyView. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy ↵Jason Baron1-0/+6
drivers When configuring a default governor (via CONFIG_CPU_FREQ_DEFAULT_*) with the intel_pstate driver, the desired default policy is not properly set. For example, setting 'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' ends up with the 'powersave' policy being set. Fix by configuring the correct default policy, if either 'powersave' or 'performance' are requested. Otherwise, fallback to what the driver originally set via its 'init' routine. Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22cpufreq: remove sysfs files for CPUs which failed to come back after resumeViresh Kumar1-32/+31
There are cases where cpufreq_add_dev() may fail for some CPUs during system resume. With the current code we will still have sysfs cpufreq files for those CPUs and struct cpufreq_policy would be already freed for them. Hence any operation on those sysfs files would result in kernel warnings. Example of problems resulting from resume errors (from Bjørn Mork): WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [<ffffffff81380b0e>] dump_stack+0x55/0x76 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac [<ffffffff81122562>] do_dentry_open+0x17c/0x257 [<ffffffff8112267e>] finish_open+0x41/0x4f [<ffffffff81130225>] do_last+0x80c/0x9ba [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42 [<ffffffff81130606>] path_openat+0x233/0x4a1 [<ffffffff81130b7e>] do_filp_open+0x35/0x85 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa [<ffffffff811233a7>] SyS_openat+0xf/0x11 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b To fix this, remove those sysfs files or put the associated kobject in case of such errors. Also, to make it simple, remove the cpufreq sysfs links from all the CPUs (except for the policy->cpu) during suspend, as that operation won't result in a loss of sysfs file permissions and we can create those links during resume just fine. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-and-tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-21null_blk: support submit_queues on use_per_node_hctxMatias Bjørling1-4/+35
In the case of both the submit_queues param and use_per_node_hctx param are used. We limit the number af submit_queues to the number of online nodes. If the submit_queues is a multiple of nr_online_nodes, its trivial. Simply map them to the nodes. For example: 8 submit queues are mapped as node0[0,1], node1[2,3], ... If uneven, we are left with an uneven number of submit_queues that must be mapped. These are mapped toward the first node and onward. E.g. 5 submit queues mapped onto 4 nodes are mapped as node0[0,1], node1[2], ... Signed-off-by: Matias Bjorling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-21null_blk: set use_per_node_hctx param to falseMatias Bjørling1-2/+2
The defaults for the module is to instantiate itself with blk-mq and a submit queue for each CPU node in the system. To save resources, initialize instead with a single submit queue. Signed-off-by: Matias Bjorling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-20pstore: Don't allow high traffic options on fragile devicesLuck, Tony2-0/+2
Some pstore backing devices use on board flash as persistent storage. These have limited numbers of write cycles so it is a poor idea to use them from high frequency operations. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20Merge tag 'dmaengine-fixes-3.13-rc4' of ↵Linus Torvalds9-109/+79
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine fixes from Dan Williams: - deprecation of net_dma to be removed in 3.14 - crash regression fix in pl330 from the dmaengine_unmap rework - crash regression fix for any channel running raid ops without CONFIG_ASYNC_TX_DMA from dmaengine_unmap - memory leak regression in mv_xor from dmaengine_unmap - build warning regressions in mv_xor, fsldma, ppc4xx, txx9, and at_hdmac from dmaengine_unmap - sleep in atomic regression in dma_async_memcpy_pg_to_pg - new fix in mv_xor for handling channel initialization failures * tag 'dmaengine-fixes-3.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net_dma: mark broken dma: pl330: ensure DMA descriptors are zero-initialised dmaengine: fix sleep in atomic dmaengine: mv_xor: fix oops when channels fail to initialise dma: mv_xor: Use dmaengine_unmap_data for the self-tests dmaengine: fix enable for high order unmap pools dma: fix build warnings in txx9 dmatest: fix build warning on mips dma: fix fsldma build warnings dma: fix build warnings in ppc4xx dmaengine: at_hdmac: remove unused function dma: mv_xor: remove mv_desc_get_dest_addr()
2013-12-20Merge tag 'renesas-fixes-for-v3.13' of ↵Kevin Hilman1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Renesas ARM based SoC fixes for v3.13 * r8a7790 (R-Car H1) SoC - Correct GPIO resources in DT. This problem has been present since GPIOs were added to the r8a7790 SoC by f98e10c88aa95bf7 ("ARM: shmobile: r8a7790: Add GPIO controller devices to device tree") in v3.12-rc1. * irqchip renesas-intc-irqpin - Correct register bitfield shift calculation This bug has been present since the renesas-intc-irqpin driver was introduced by 443580486e3b9657 ("irqchip: Renesas INTC External IRQ pin driver") in v3.10-rc1 * Lager board - Do not build the phy fixup unless CONFIG_PHYLIB is enabled This problem was introduced by 48c8b96f21817aad * tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20IB/uverbs: Check access to userspace response buffer in extended commandYann Droneaud1-0/+5
This patch adds a check on the output buffer with access_ok(VERIFY_WRITE, ...) to ensure the whole buffer is in userspace memory before using the pointer in uverbs functions. If the buffer or a subset of it is not valid, returns -EFAULT to the caller. This will also catch invalid buffer before the final call to copy_to_user() which happen late in most uverb functions. Just like the check in read(2) syscall, it's a sanity check to detect invalid parameters provided by userspace. This particular check was added in vfs_read() by Linus Torvalds for v2.6.12 with following commit message: https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/?id=fd770e66c9a65b14ce114e171266cf6f393df502 Make read/write always do the full "access_ok()" tests. The actual user copy will do them too, but only for the range that ends up being actually copied. That hides bugs when the range has been clamped by file size or other issues. Note: there's no need to check input buffer since vfs_write() already does access_ok(VERIFY_READ, ...) as part of write() syscall. Link: http://marc.info/?i=cover.1387273677.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20IB/uverbs: Check input length in flow steering uverbsYann Droneaud1-0/+6
Since ib_copy_from_udata() doesn't check yet the available input data length before accessing userspace memory, an explicit check of this length is required to prevent: - reading past the user provided buffer, - underflow when subtracting the expected command size from the input length. This will ensure the newly added flow steering uverbs don't try to process truncated commands. Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20IB/uverbs: Set error code when fail to consume all flow_spec itemsYann Droneaud1-0/+1
If the flow_spec items parsed count does not match the number of items declared in the flow_attr command, or if not all bytes are used for flow_spec items (eg. trailing garbage), a log message is reported and the function leave through the error path. Unfortunately the error code is currently not set. This patch set error code to -EINVAL in such cases, so that the error is reported to userspace instead of silently fail. Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20IB/uverbs: Check reserved fields in create_flowYann Droneaud1-0/+7
As noted by Daniel Vetter in its article "Botching up ioctls"[1] "Check *all* unused fields and flags and all the padding for whether it's 0, and reject the ioctl if that's not the case. Otherwise your nice plan for future extensions is going right down the gutters since someone *will* submit an ioctl struct with random stack garbage in the yet unused parts. Which then bakes in the ABI that those fields can never be used for anything else but garbage." It's important to ensure that reserved fields are set to known value, so that it will be possible to use them latter to extend the ABI. The same reasonning apply to comp_mask field present in newer uverbs command: per commit 22878dbc9173 ("IB/core: Better checking of userspace values for receive flow steering"), unsupported values in comp_mask are rejected. [1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20IB/uverbs: Check comp_mask in destroy_flowYann Droneaud1-0/+3
Just like the check added to create_flow in 22878dbc9173 ("IB/core: Better checking of userspace values for receive flow steering"), comp_mask must be checked in destroy_flow too. Since only empty comp_mask is currently supported, any other value must be rejected. This check was silently added in a previous patch[1] to move comp_mask in extended command header, part of previous patchset[2] against create/destroy_flow uverbs. The idea of moving comp_mask to the header was discarded for the final patchset[3]. Unfortunately the check added in destroy_flow uverb was not integrated in the final patchset. [1] http://marc.info/?i=40175eda10d670d098204da6aa4c327a0171ae5f.1381510045.git.ydroneaud@opteya.com [2] http://marc.info/?i=cover.1381510045.git.ydroneaud@opteya.com [3] http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com Cc: Matan Barak <matanb@mellanox.com> Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-20IB/uverbs: Check reserved field in extended command headerYann Droneaud1-0/+3
As noted by Daniel Vetter in its article "Botching up ioctls"[1] "Check *all* unused fields and flags and all the padding for whether it's 0, and reject the ioctl if that's not the case. Otherwise your nice plan for future extensions is going right down the gutters since someone *will* submit an ioctl struct with random stack garbage in the yet unused parts. Which then bakes in the ABI that those fields can never be used for anything else but garbage." It's important to ensure that reserved fields are set to known value, so that it will be possible to use them latter to extend the ABI. The same reasonning apply to comp_mask field present in newer uverbs command: per commit 22878dbc9173 ("IB/core: Better checking of userspace values for receive flow steering"), unsupported values in comp_mask are rejected. [1] http://blog.ffwll.ch/2013/11/botching-up-ioctls.html Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-22 22:53:53 +0000