summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-02-283c59x: Ensure to apply the expires timeStafford Horne1-1/+1
In commit 5b6490def9168af6a ("3c59x: Use setup_timer()") Amitoj removed add_timer which sets up the epires timer. In this patch the behavior is restore but it uses mod_timer which is a bit more compact. Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-27rocker: fix an error codeDan Carpenter1-1/+1
We intended to return PTR_ERR() here instead of 1. Fixes: 1f9993f6825f ('rocker: fix a neigh entry leak issue') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26Merge branch '1GbE' of ↵David S. Miller13-144/+261
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-02-24 This series contains updates to e1000e, igb and igbvf. Raanan provides updates for e1000e, first increases the ULP timer since it now takes longer for the ULP exit to complete on Skylake. Fixes the configuration of the internal hardware PHY clock gating mechanism, which was causing packet loss due to mis configuring. Fixed additional ULP configuration settings which were not being properly cleared after cable connect in V-Pro capable systems. Added support for more i219 devices. Takuma Ueba provides a fix for I210 where IPv6 autoconf test sometimes fails due to DAD NS for link-local is not transmitted. To avoid this issue, we need to wait until 1000BASE-T status register "Remote receiver status OK". Todd provides a patch to override EEPROM WoL settings for specific OEM devices. Then renamed igb defines to be more generic, since the define E1000_MRQC_ENABLE_RSS_4Q enables 4 and 8 queues depending on the part. Roland Hii fixes an issue where only the half cycle time of less than or equal to 70 millisecond uses the I210 clock output function. His patch adds additional conditions when half cycle time is equal to 125 or 250 or 500 millisecond to use the clock output function. Alex Duyck adds support for generic transmit checksums for igb and igbvf. Jon Maxwell fixes an issues where customer applications are registering and un-registering multicast addresses every few seconds which is leading to many "Link is up" messages in the logs as a result of the netif_carrier_off(netdev) in igbvf_msix_other(). So remove the link is up message when registering multicast addresses. Corinna Vinschen provides a fix for when switching off VLAN offloading on i350, the VLAN interface becomes unusable. Stefan Assmann updates the driver to use ndo_stop() instead of dev_close() when running ethtool offline self test. Since dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. v2: Dropped patches 6-10 in the original series. Patch 6-7 added support for character device for AVB and based on community feedback, we do not want to do this. Patches 8-10 provided fixes to the problematic code added in patches 6 & 7. So all of them must go! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: mlx4: use new ETHTOOL_G/SSETTINGS APIDavid Decotigny3-170/+189
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: fcoe: use __ethtool_get_ksettingsDavid Decotigny1-16/+20
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: team: use __ethtool_get_ksettingsDavid Decotigny1-4/+4
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: macvlan: use __ethtool_get_ksettingsDavid Decotigny1-4/+4
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: ipvlan: use __ethtool_get_ksettingsDavid Decotigny1-4/+4
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: bonding: use __ethtool_get_ksettingsDavid Decotigny1-8/+6
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: usnic: use __ethtool_get_ksettingsDavid Decotigny1-4/+4
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: usnic: use __ethtool_get_settingsDavid Decotigny1-1/+1
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: usnic: remove unused call to ethtool_ops::get_settingsDavid Decotigny1-2/+0
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qed, qede: rebrand module descriptionYuval Mintz2-6/+6
Drop the `QL4xxx 40G/100G' and use `FastLinQ 4xxxx' instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qed: Prevent probe on previous errorYuval Mintz1-0/+11
Don't allow driver to probe on an adapter at a failed state; Gracefully block the probe instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qed: add MODULE_FIRMWARE()Yuval Mintz1-0/+2
Module is using a binary firmware file and so should be marked as such. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qede: Don't report link change needlesslyYuval Mintz1-6/+10
There are several corner cases where driver might get a 2nd notification about the same link change. Don't log any additional changes if the physical carrier is already reported as it should. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qede: Linearize SKBs when neededYuval Mintz1-5/+33
There's a corner-case in HW where an SKB queued for transmission that contains too many frags will cause FW to assert. This patch solves this by linearizing the SKB if necessary. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25qede: Change pci DID for 10g deviceYuval Mintz1-1/+1
The device ID for the 10g module has changed. Populate the pci_ids table accordingly. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25netxen: Use kobj_to_dev()Amitoj Kaur Chawla1-5/+5
Introduce the use of kobj_to_dev() helper function instead of open coding it with container_of() The Coccinelle semantic patch used to make this change is as follows: //<smpl> @@ expression a; symbol kobj; @@ - container_of(a, struct device, kobj) + kobj_to_dev(a) //</smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-253c59x: Use setup_timer()Amitoj Kaur Chawla1-8/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. The Coccinelle semantic patch that fixes this problem is as follows: // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); ... -t.data = d; -t.function = f; // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25forcedeth: Use setup_timer()Amitoj Kaur Chawla1-6/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. The Coccinelle semantic patch that fixes this problem is as follows: // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: tulip: Use setup_timer()Amitoj Kaur Chawla1-9/+5
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. The Coccinelle semantic patch that fixes this problem is as follows: // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25gianfar: fix endianness for hardware timestampYangbo Lu1-2/+2
Fix endianness for the 64-bit hardware timestamp value with be64_to_cpu to support both PowerPC platforms and ARM platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25gianfar_ptp: replace get_of_u32 with of_property_read_u32Yangbo Lu1-20/+13
Replace get_of_u32 with standard helper function of_property_read_u32 since the latter can process cpu endianness. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25phy: marvell: Fix 88E1510 initializationClemens Gruber1-35/+35
A bug was introduced in the merge commit b633353115e3 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") The generic marvell_config_init (and therefore marvell_of_reg_init) is not called anymore for the Marvell 88E1510 (in net-next). This patch calls marvell_config_init and moves the specific init function for the 88E1510 below the marvell_config_init function to avoid adding a function predeclaration. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: dsa: mv88e6xxx: implement port_vlan_dumpVivien Didelot4-66/+56
Remove the port_pvid_get and vlan_getnext functions in favor of a simpler mv88e6xxx_port_vlan_dump function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25vxlan: simplify metadata_dst usage in vxlan_rcvJiri Benc1-12/+7
Now when the packet is scrubbed early, the metadata_dst can be assigned to the skb as soon as it is allocated. This simplifies the error cleanup path, as the dst will be freed by kfree_skb. It is also not necessary to pass it as a parameter to functions anymore. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25vxlan: consolidate rx handling to a single functionJiri Benc1-44/+28
Now when both vxlan_udp_encap_recv and vxlan_rcv are much shorter, combine them into a single function. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25vxlan: move ECN decapsulation to a separate functionJiri Benc1-31/+31
It simplifies the vxlan_rcv function. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25vxlan: move inner L2 header processing to a separate functionJiri Benc1-16/+33
This code will be different for VXLAN-GPE, so move it to a separate function. It will also make the rx path less spaghetti-like. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25vxlan: consolidate GBP handling even moreJiri Benc1-4/+5
Now when the packet is scrubbed early, skb->mark can be set in the GBP handling code. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24ppp: clarify parsing of user supplied data in ppp_set_compress()Guillaume Nault1-5/+7
* Split big conditional statement. * Check (data.length <= CCP_MAX_OPTION_LENGTH) only once. * Don't read ccp_option[1] if not initialised. Reading uninitialised ccp_option[1] was harmless, because this could only happen when data.length was 0 or 1. So even then, we couldn't pass the (ccp_option[1] < 2 || ccp_option[1] > data.length) test anyway. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24bnx2x: add a separate GENEVE Kconfig symbolArnd Bergmann2-7/+17
When CONFIG_GENEVE is built as a loadable module, and bnx2x is built-in, we get this link error: drivers/net/built-in.o: In function `bnx2x_open': :(.text+0x33322): undefined reference to `geneve_get_rx_port' drivers/net/built-in.o: In function `bnx2x_sp_rtnl_task': :(.text+0x3e632): undefined reference to `geneve_get_rx_port' This avoids the problem by adding a separate Kconfig symbol named CONFIG_BNX2X_GENEVE that is only enabled when the code is reachable from the driver. This is the same trick that BNX2X does for VXLAN support, and is similar to how I40E handles both. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 883ce97d25b0 ("bnx2x: Add Geneve inner-RSS support") Acked-By: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24igb: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-6/+8
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: Fix VLAN tag stripping on Intel i350Corinna Vinschen1-9/+32
Problem: When switching off VLAN offloading on an i350, the VLAN interface gets unusable. For testing, set up a VLAN on an i350 and some remote machine, e.g.: $ ip link add link eth0 name eth0.42 type vlan id 42 $ ip addr add 192.168.42.1/24 dev eth0.42 $ ip link set dev eth0.42 up Offloading is switched on by default: $ ethtool -k eth0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ ping -c 3 -I eth0.42 192.168.42.2 [...works as usual...] Now switch off VLAN offloading and try again: $ ethtool -K eth0 rxvlan off Actual changes: rx-vlan-offload: off tx-vlan-offload: off [requested on] $ ping -c 3 -I eth0.42 192.168.42.2 PING 192.168.42.2 (192.168.42.2) from 192.168.42.1 eth0.42: 56(84) bytes of da ta. --- 192.168.42.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms I can only reproduce it on an i350, the above works fine on a 82580. While inspecting the igb source, I came across the code in igb_set_vmolr which sets the E1000_VMOLR_STRVLAN/E1000_DVMOLR_STRVLAN flags once and for all, and in all of the igb code there's no other place where the STRVLAN is set or cleared. Thus, VLAN stripping is enabled in igb unconditionally, independently of the offloading setting. I compared that to the latest Intel igb-5.3.3.5 driver from http://sourceforge.net/projects/e1000/ which in fact sets and clears the STRVLAN flag independently from igb_set_vmolr in its own function igb_set_vf_vlan_strip, depending on the vlan settings. So I included the STRVLAN handling from the igb-5.3.3.5 driver into our current igb driver and tested the above scenario again. This time ping still works after switching off VLAN offloading. Tested on i350, with and without addtional VFs, as well as on 82580 successfully. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igbvf: remove "link is Up" message when registering mcast addressJon Maxwell1-1/+0
A similar issue was addressed a few years ago in the following thread: http://www.spinics.net/lists/netdev/msg245877.html At that time there were concerns that removing this statement may cause other side effects. However the submitter addressed those concerns. But the dialogue went cold. We have a new case where a customers application is registering and un-registering multicast addresses every few seconds. This is leading to many "Link is Up" messages in the logs as a result of the "netif_carrier_off(netdev)" statement called by igbvf_msix_other(). Also on some kernels it is interfering with the bonding driver causing it to failover and subsequently affecting connectivity. The Sourgeforge driver does not make this call and is therefore not affected. If there were any side effects I would expect that driver to also be affected. I have tested re-loading the igbvf driver and downing the adapter with the PF entity on the host where the VM has this patch. When I bring it back up again connectivity is restored as expected. Therefore I request that this patch gets submitted. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igbvf: Add support for generic Tx checksumsAlexander Duyck2-61/+82
This patch adds support for generic Tx checksums to the igbvf driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. In the case of the VF drivers this meant adding support for SCTP CRCs, and inner checksum offloads for MPLS and various tunnel types. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: Add support for generic Tx checksumsAlexander Duyck1-58/+48
This patch adds support for generic Tx checksums to the igb driver. It turns out this is actually pretty easy after going over the datasheet as we were doing a number of steps we didn't need to. In order to perform a Tx checksum for an L4 header we need to fill in the following fields in the Tx descriptor: MACLEN (maximum of 127), retrieved from: skb_network_offset() IPLEN (maximum of 511), retrieved from: skb_checksum_start_offset() - skb_network_offset() TUCMD.L4T indicates offset and if checksum or crc32c, based on: skb->csum_offset The added advantage to doing this is that we can support inner checksum offloads for tunnels and MPLS while still being able to transparently insert VLAN tags. I also took the opportunity to clean-up many of the feature flag configuration bits to make them a bit more consistent between drivers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: rename igb define to be more genericTodd Fujinaka2-4/+4
E1000_MRQC_ENABLE_RSS_4Q enables 4 and 8 queues depending on the part so rename to be generic. Similarly, E1000_MRQC_ENABLE_VMDQ_RSS_2Q has no numeric meaning so rename to be more generic. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: add conditions for I210 to generate periodic clock outputRoland Hii1-1/+2
In general case the maximum supported half cycle time of the synchronized output clock is 70msec. Slower half cycle time than 70msec can be programmed also as long as the output clock is synchronized to whole seconds, useful specifically for generating a 1Hz clock. Permitted values for the clock half cycle time are: 125,000,000 decimal, 250,000,000 decimal and 500,000,000 decimal (equals to 125msec, 250msec and 500msec respectively). Before this patch, only the half cycle time of less than or equal to 70msec uses the I210 clock output function. This patch adds additional conditions when half cycle time is equal to 125msec or 250msec or 500msec to use clock output function. Under other conditions, interrupt driven target time output events method is still used to generate the desired clock output. Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: enable WoL for OEM devices regardless of EEPROM settingTodd Fujinaka1-0/+20
Override EEPROM settings for specific OEM devices. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: constify e1000_phy_operations structureJulia Lawall2-2/+2
This e1000_phy_operations structure is never modified, so declare it as const. Other structures of this type are already const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24igb: When GbE link up, wait for Remote receiver status conditionTakuma Ueba1-0/+20
I210 device IPv6 autoconf test sometimes fails, because DAD NS for link-local is not transmitted. This packet is silently dropped. This problem is seen only GbE environment. igb_watchdog_task link up detection continues to the following process. The following cases are observed: 1.PHY 1000BASE-T Status Register Remote receiver status bit is NG. (NG status becomes OK after about 200 - 700ms) 2.In this case, the transfer packet is silently dropped. 1000BASE-T Status register [Expected]: 0x3800 or 0x7800 [problem occurred]: 0x2800 or 0x6800 Frequency of occurrence: approx 1/10 - 1/40 observed In order to avoid this problem, wait until 1000BASE-T Status register "Remote receiver status OK" After applying this patch, at least 400 runs succeed with no problems. Signed-off-by: Takuma Ueba <t.ueba11@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24e1000e: Initial support for KabeLakeRaanan Avargil2-0/+8
i219 (4) and i219 (5) are the next LOM generations that will be available on the next Intel platform (KabeLake). This patch provides the initial support for the devices. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24e1000e: Clear ULP configuration register on ULP exitRaanan Avargil2-0/+6
There have been bugs caused by HW ULP configuration settings not being properly cleared after cable connect in V-Pro capable systems. This caused HW to get out of sync occasionally. The fix ensures that ULP settings are cleared in HW after LAN cable re-connect. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24e1000e: Set HW FIFO minimum pointer gap for non-gig speedsRaanan Avargil1-0/+12
Based on feedback from HW team, the configured value of the internal PHY HW FIFO pointer gap was incorrect for non-gig speeds. This patch provides the correct configuration. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24e1000e: Increase PHY PLL clock gate timingRaanan Avargil2-0/+15
Several packet loss issues were reported for which the root cause for them was an incorrect configuration of internal HW PHY clock gating mechanism by SW. This patch provides the correct mechanism. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24e1000e: Increase ULP timerRaanan Avargil1-2/+2
Due to system level changes introduced in Skylake, ULP exit takes significantly longer to occur. Therefore, driver must wait longer for. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-24gianfar: Remove redundant ops for do_tstamp from xmit()Claudiu Manoil1-9/+5
Timestamp BD status updates that can be merged into the same "do_tstamp" block, no need for extra save/restore to the BD area. The code is more readable too. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24gianfar: Use skb_frag_t pointers inside xmit()Claudiu Manoil1-9/+9
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:04:26 +0000