summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-09-07HID: wiimote: Add status requestDavid Herrmann1-0/+18
The wiimote does not send status reports continuously so this adds a helper function to request a status report and parses the battery charge level. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Initialize IR cam on requestDavid Herrmann1-0/+28
Initialize the IR cam if the related input device is opened by userspace. Stop IR cam again if userspace is no longer interested in its data events. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add IR initializerDavid Herrmann1-0/+136
The wiimote IR cam needs a fairly complex initialization sequence. This adds a helper function that performs IR initialization synchronously. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add write-register helpersDavid Herrmann1-1/+27
Add helpers to synchronously write registers of the wiimote. This is heavily used by initialization functions for wiimote peripherals. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Helper functions for synchronous requestsDavid Herrmann1-0/+56
To initialize wiimote peripherals, the stream to the wiimote must be held exclusively by the initializer, otherwise the initialization will fail. Many initializations require multiple memory requests to be sent synchronously so we need a way to lock the stream and release it when we are done. This adds several helper functions which allow to lock the stream, then send requests, wait for the answers and release the stream again. When holding the lock, the function may sleep and interrupted by signals. Also it returns after a short timeout so userspace shouldn't notice long delays. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add register/eeprom memory supportDavid Herrmann1-0/+40
The wiimote allows direct access to its memory mapped registers and internal eeprom. This adds support to access this memory and handle memory events. There are two macros which wrap up the memory access functions to avoid accidentally overwriting sensitive eeprom data because a boolean value was wrongly set. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add missing extension DRM handlersDavid Herrmann1-1/+28
If an extension is connected the wiimote may report data though DRMs that contain extension data. This adds handlers for these DRMs but discards extension data since we do not support it, yet. It prints a warning to kernel log if an unhandled report is catched. Since we handle all requests now, this should never happen, though. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Parse IR dataDavid Herrmann1-0/+73
Parse IR data and report it to IR input-device. IR data is sent in 3 different formats, but we only support the basic format as there is no way to send the additional information to userspace. All three formats are compatible with the basic IR data format so we need only one parser. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add IR input deviceDavid Herrmann1-4/+67
The IR cam of the wiimote reports 4 trackable lights as absolute values. Since we can turn the IR cam on and off, we register a separate input device so we can react on open/close callbacks to save wiimote battery power when IR cam is not needed. The cam can be in four states: off, basic, extended and full The DRM chooser automatically selects a proper DRM that includes all required IR data so no information is lost. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Parse accelerometer dataDavid Herrmann1-1/+101
Add parser functions for accelerometer data reported by the wiimote. The data is almost always reported in the same format, so we can use a single handler. However, an own handler function is created for each DRM-mode because when IR and extension support is added, each of them is parsed differently. Also set the appropriate DRM including accelerometer data on DRM requests to actually retrieve the accelerometer data. Data is reported to userspace as ABS_RX/Y/Z values. The values are between -500 and 500 and 0 means no acceleration. See also userspace xwiimote library for data parsing. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add accelerometer input deviceDavid Herrmann1-10/+89
Add new input device for every wiimote which is used to report accelerometer data to userspace. Only if the input device is currently open, we make the wiimote send accelerometer data. This saves a whole lot of energy on the wiimote if an application is only interested in button input reports. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Add force-feedback supportDavid Herrmann1-3/+28
The wiimote has a single rumble motor. This adds force feedback support for wiimote devices with FF_RUMBLE. The rumble motor is very simple and only supports an on/off switch so no complex ff-effects are supported. This also removes the event callback that was registered before but unused. The ff-device overwrites this callback, anyway. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wiimote: Support rumble deviceDavid Herrmann1-4/+41
This adds support for the wiimote's rumble device. Every output report can enable and disable the rumble motor. Hence, every output report must look up our new RUMBLE flag and make sure that it does not unintentionally toggle the rumble motor. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-0/+33
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2) drm/radeon/kms: set a default max_pixel_clock
2011-09-02drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)Alex Deucher2-0/+30
If the bios or OS sets the pci max read request size to 0 or an invalid value (6,7), it can result in a hang or slowdown. Check and set it to something sane if it's invalid. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=42162 v2: use pci reg defines from include/linux/pci_regs.h Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-31Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds3-5/+15
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix a hang on device failure. md: fix clearing of 'blocked' flag in the presence of bad blocks. md/linear: avoid corrupting structure while waiting for rcu_free to complete. md: use REQ_NOIDLE flag in md_super_write() md: ensure changes to 'write-mostly' are reflected in metadata. md: report failure if a 'set faulty' request doesn't.
2011-08-31drm/radeon/kms: set a default max_pixel_clockDave Airlie1-0/+3
On some Power rv100 cards, we have no ATY OF table, but we have no combios table either, and hence we refuse all modes on VGA-0 since we end up with a 0 max pixel clock. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2011-08-31md/raid5: fix a hang on device failure.NeilBrown1-1/+1
Waiting for a 'blocked' rdev to become unblocked in the raid5d thread cannot work with internal metadata as it is the raid5d thread which will clear the blocked flag. This wasn't a problem in 3.0 and earlier as we only set the blocked flag when external metadata was used then. However we now set it always, so we need to be more careful. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-30Merge branch 'drm-fixes' of ↵Linus Torvalds4-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add s/r quirk for Compaq Presario V5245EU drm/radeon/kms: evergreen & ni reset SPI block on CP resume drm: Fix the number of connector and encoder to cleanup functions
2011-08-30drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher1-0/+8
Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse2-0/+2
For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30md: fix clearing of 'blocked' flag in the presence of bad blocks.NeilBrown1-1/+1
When the 'blocked' flag on a device is cleared while there are unacknowledged bad blocks we must fail the device. This is needed for backwards compatability of the interface. The code currently uses the wrong test for "unacknowledged bad blocks exist". Change it to the right test. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-76/+58
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netpoll: fix incorrect access to skb data in __netpoll_rx cassini: init before use in cas_interruptN. can: ti_hecc: Fix uninitialized spinlock in probe can: ti_hecc: Fix unintialized variable net: sh_eth: fix the compile error net/phy: fix DP83865 phy interrupt handler sendmmsg/sendmsg: fix unsafe user pointer access ibmveth: Fix leak when recycling skb and hypervisor returns error arp: fix rcu lockdep splat in arp_process() bridge: fix a possible use after free bridge: Pseudo-header required for the checksum of ICMPv6 mcast: Fix source address selection for multicast listener report MAINTAINERS: Update GIT trees for network development ath9k: Fix PS wrappers in ath9k_set_coverage_class carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock wl12xx: add max_sched_scan_ssids value to the hw description wl12xx: Fix validation of pm_runtime_get_sync return value wl12xx: Remove obsolete testmode NVS push command bcma: add uevent to the bus, to autoload drivers ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address ...
2011-08-29Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds3-13/+95
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: fix the compile error in setup-sh7757.c serial: sh-sci: report CTS as active for get_mctrl sh: Add unaligned memory access for PC relative intructions sh: Fix unaligned memory access for branches without delay slots sh: Fix up fallout from cpuidle changes. serial: sh-sci: console Runtime PM support sh: Fix conflicting definitions of ptrace_triggered serial: sh-sci: fix DMA build by including dma-mapping.h serial: sh-sci: Fix up default regtype probing. sh: intc: enable both edges GPIO interrupts on sh7372 shwdt: fix usage of mod_timer clocksource: sh_cmt: wait for CMCNT on init V2
2011-08-29drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim1-0/+2
It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-29serial: sh-sci: report CTS as active for get_mctrlYoshii Takashi1-1/+1
sh-sci.c sets hardware up and then let the HW do all flow controls. There is no software code, nor needs to get/set real CTS signal. But, when turning CRTSCTS on through termios, uart_set_termios() in serial_core.c checks CTS, and stops TX if it is inactive at the moment. Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS, the sequence open -> set CRTSCTS -> write hit the case and stop working, no more outputs. This patch makes sci_get_mctrl() report CTS in addition. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-28Merge branch 'pm-fixes' of ↵Linus Torvalds2-18/+23
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) OMAP: omap_device: only override _noirq methods, not normal suspend/resume PM / Runtime: Correct documentation of pm_runtime_irq_safe() ARM: mach-shmobile: sh7372 LCDC1 suspend fix sh-sci / PM: Use power.irq_safe PM: Use spinlock instead of mutex in clock management functions
2011-08-27Merge branch 'fixes' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix panic after rmmod with slow targets
2011-08-26Merge branch 'drm-intel-fixes' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice
2011-08-26Merge branch 'usb-linus' of ↵Linus Torvalds17-76/+283
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits) USB: ftdi_sio: add Calao reference board support USB option driver K3765/K4505 avoid CDC_DATA interface USB: option: add YUGA device id to driver usb: s5p-ehci: fix a NULL pointer deference USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in ehci_bus_resume(). USB option driver add PID of Huawei Vodafone K4605 USB option driver add PID of Huawei Vodafone K3806 xhci: Handle zero-length isochronous packets. USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. usb: musb: gadget: fix error path usb: gadget: f_phonet: unlock in error case usb: musb: blackfin: include prefetch head file usb: musb: tusb6010: fix compilation usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.h usb: musb: cppi: fix build errors due to DBG and missing musb variable usb: musb: ux500: replace missing DBG with dev_dbg usb: musb: ux500: set dma config for both src and dst usb: musb: fix oops on musb_gadget_pullup usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1) usb: gadget: hid: don't STALL when processing a HID Descriptor request ...
2011-08-26Merge branch 'tty-linus' of ↵Linus Torvalds14-25/+52
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: omap-serial: Allow IXON and IXOFF to be disabled. TTY: serial, document ignoring of uart->ops->startup error TTY: pty, fix pty counting 8250: Fix race condition in serial8250_backup_timeout(). serial/8250_pci: delete duplicate data definition 8250_pci: add support for Rosewill RC-305 4x serial port card tty: Add "spi:" prefix for spi modalias atmel_serial: fix atmel_default_console_device serial: 8250_pnp: add Intermec CV60 touchscreen device drivers/serial/ucc_uart.c: Fix compiler warning pch_uart: Set PCIe bus number using probe parameter serial: samsung: Fix build error
2011-08-26Merge branch 'driver-core-linus' of ↵Linus Torvalds8-4/+66
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: drivers:misc: ti-st: fix unexpected UART close drivers:misc: ti-st: free skb on firmware download drivers:misc: ti-st: wait for completion at fail drivers:misc: ti-st: reinit completion before send drivers:misc: ti-st: fail-safe on wrong pkt type drivers:misc: ti-st: reinit completion on ver read drivers:misc:ti-st: platform hooks for chip states drivers:misc: ti-st: avoid a misleading dbg msg base/devres.c: quiet sparse noise about context imbalance pti: add missing CONFIG_PCI dependency drivers/base/devtmpfs.c: correct annotation of `setup_done' driver core: fix kernel-doc warning in platform.c firmware: fix google/gsmi.c build warning
2011-08-26Merge branch 'staging-linus' of ↵Linus Torvalds7-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: tidspbridge: fix compilation on dsp clock functions staging: octeon-ethernet: Add missing #includes. Staging: zcache: signedness bug in tmem_get() staging: zcache: fix crash on high memory swap staging: brcm80211: SPARC build error fix staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel
2011-08-26cassini: init before use in cas_interruptN.françois romieu1-2/+1
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Spotted-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26can: ti_hecc: Fix uninitialized spinlock in probeAbhilash K V1-0/+1
In ti_hecc_probe(), the spinlock priv->mbx_lock is not inited, causing a spinlock lockup BUG. Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26can: ti_hecc: Fix unintialized variableAbhilash K V1-1/+1
In ti_hecc_xmit(), local variable "data" is not initialized before being used. This initialization got inadvertently removed in the following patch: can: Unify droping of invalid tx skbs and netdev stats Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26net: sh_eth: fix the compile errorYoshihiro Shimoda1-0/+1
Fix the following build error: CC drivers/net/sh_eth.o drivers/net/sh_eth.c:1115: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘sh_eth_interrupt’ drivers/net/sh_eth.c: In function ‘sh_eth_open’: drivers/net/sh_eth.c:1387: error: implicit declaration of function ‘request_irq’ drivers/net/sh_eth.c:1387: error: ‘sh_eth_interrupt’ undeclared (first use in this function) drivers/net/sh_eth.c:1387: error: (Each undeclared identifier is reported only once drivers/net/sh_eth.c:1387: error: for each function it appears in.) drivers/net/sh_eth.c:1391: error: ‘IRQF_SHARED’ undeclared (first use in this function) drivers/net/sh_eth.c:1424: error: implicit declaration of function ‘free_irq’ make[2]: *** [drivers/net/sh_eth.o] Error 1 Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26net/phy: fix DP83865 phy interrupt handlerGiuseppe CAVALLARO1-6/+11
According to the DP83865 datasheet we need to clear the interrupt status bit by writing a 1 to the corresponding bit in INT_CLEAR (2:0 are reserved). Proposed and tested by Thorsten. Signed-off-by: Thorsten Schubert <tshu@msc-ge.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-26Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2-5/+11
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] memory hotplug: only unassign assigned increments [S390] Change default action from reipl to stop for on_restart [S390] arch/s390/kernel/ipl.c: correct error detection check [S390] drivers/s390/block/dasd_ioctl.c: add missing kfree [S390] nss,initrd: kernel image and initrd must be in different segments
2011-08-26Merge branch 'master' of ↵John W. Linville10-64/+34
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-26Merge branch 'master' of ↵Paul Mundt236-1546/+3043
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-fixes-for-linus
2011-08-25drivers/rtc/rtc-s3c.c: allow multiple open / allow no-ioctl-open'ed rtc to ↵MyungJoo Ham1-42/+25
have irq. The previous rtc-s3c had two issues related with its IRQ. 1. Users cannot open rtc multiple times because an open operation calls request_irq on the same IRQ. (e.g., two user processes wants to open and read RTC time from rtc-s3c at the same time) 2. If alarm is set and no one has the rtc opened with filesystem (either the alarm is set by kernel/boot-loader or user set an alarm and closed rtc dev file), the pending bit is not cleared and no further interrupt is invoked. When the alarm is used by the system itself such as a resume from suspend-to-RAM or other Low-power modes/idle, this is a critical issue. This patch mitigates these issues by calling request_irq at probe and free_irq at remove. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25drivers/rtc/rtc-s3c.c: correct debug messagesMyungJoo Ham1-6/+6
RTC-S3C used to print out debug messages incorrectly. This patch corrects incorrect outputs. (undecoded bcd numbers, incorrectly decoded register values) This patch affects the pr-debug messages only. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25drivers/leds/leds-bd2802.c: bd2802_unregister_led_classdev() should ↵Axel Lin1-0/+5
unregister all registered leds bd2802_unregister_led_classdev() should unregister all registered instances of led_classdev class that had registered by bd2802_register_led_classdev(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kim Kyuwon <q1.kim@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25drivers/misc/ab8500-pwm.c: fix modaliasAxel Lin1-1/+1
Since 43cc71eed12 ("platform: prefix MODALIAS with "platform:""), the platform modalias is prefixed with "platform:". This patch changes the MODULE_ALIAS to "platform:ab8500-pwm". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Arun Murthy <arun.murthy@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25drivers/misc/fsa9480.c: fix a leak of the IRQ during init failureAxel Lin1-2/+2
Make sure we are passing the same cookie in all calls to request_threaded_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25backlight: fix module alias prefix for adp8870_blAxel Lin1-1/+1
This is an i2c driver, not a platform driver, thus use "i2c" prefix for the module alias. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25backlight: add a callback 'notify_after' for backlight controlDilan Lee1-0/+9
We need a callback to do some things after pwm_enable, pwm_disable and pwm_config. Signed-off-by: Dilan Lee <dilee@nvidia.com> Reviewed-by: Robert Morell <rmorell@nvidia.com> Reviewed-by: Arun Murthy <arun.murthy@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25leds: add missing include of linux/module.hAxel Lin2-0/+2
Add missing include of linux/module.h for drivers that use interfaces from linux/module.h. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Magnus Damm <damm@opensource.se> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25drivers/video/backlight/ep93xx_bl.c: add missing include of linux/module.hAxel Lin1-1/+1
ep93xx_bl.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors: CC [M] drivers/video/backlight/ep93xx_bl.o drivers/video/backlight/ep93xx_bl.c:138: error: 'THIS_MODULE' undeclared here (not in a function) drivers/video/backlight/ep93xx_bl.c:158: error: expected declaration specifiers or '...' before string constant drivers/video/backlight/ep93xx_bl.c:158: warning: data definition has no type or storage class ... Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-03 04:59:17 +0000