summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-03-09gpio: tps65912: fix bad mergeLinus Walleij1-2/+2
I screwed up while merging the immutable branch for TPS65912, so fixing it unbroken again. Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"Linus Walleij1-0/+22
This reverts commit 3fab91ea284a3b795327dda915a3c150a49e4be2.
2016-03-09gpio: omap: drop dev field from gpio_bank structureGrygorii Strashko1-28/+29
GPIO chip structure already has "parent" field which is used for the same purpose as "dev" field in gpio_bank structure - store pointer on GPIO device. Hence, drop duplicated "dev" field from gpio_bank structure. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09Merge branch 'ib-mfd-regulator-gpio-4.6' of ↵Linus Walleij108-1625/+1332
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel
2016-03-09gpio: mpc8xxx: Slightly update the code for better readabilityAxel Lin1-2/+5
Setting gc->direction_output to gc->direction_output looks strange. I think this change makes the intention more clear. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chipAxel Lin1-27/+21
*read_reg and *write_reg can be removed because at all the places to call them, we can just use gc->read_reg/gc->write_reg instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mpc8xxx: Fixup setting gpio direction outputAxel Lin1-2/+1
For devtype with specific gpio_dir_out implementation, current code is wrong because below code sets both gc->direction_output and mpc8xxx_gc->direction_output to the same function. gc->direction_output = devtype->gpio_dir_out ?: gc->direction_output; mpc8xxx_gc->direction_output = gc->direction_output; Set mpc8xxx_gc->direction_output = gc->direction_output first to fix it. This way mpc8xxx_gc->direction_output actually calls the standard bgpio_dir_out() to update register. Fixes: commit 42178e2a1e42 ("drivers/gpio: Switch gpio-mpc8xxx to use gpio-generic") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: mcp23s08: Add support for mcp23s18Phil Reid1-4/+15
This patch adds support for the mcp23s18 which is very similar to the mcp23s17. A couple of control bits are not the same. Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored. Patch changes the following: - Add mcp23s18 types. - Always set mirror bit if the dts defines mcp23s18. regardless of type. Mirror bit is ignored on 8 bit devices anyway. - In mcp23s08_probe use chip.ngpio instead of logic based on type to determine number of gpio lins to increment by. This is set appropiately by the call to mcp23s08_probe_one. - Add mcp23s18 to device tree documentation. - Remove statement that irqs don't work for spi. They do. Tested with mcp23s18. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: add driver for MEN 16Z127 GPIO controllerAndreas Werner3-0/+208
The 16Z127 is a 32bit GPIO controller on a MCB FPGA. Every single line can be configured as input and output. Push pull and open drain are supported as well as setting a debounce value for the input lines. Signed-off-by: Andreas Werner <andy@wernerandy.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_freeAxel Lin1-22/+0
The implementation of lp3943_gpio_request/lp3943_gpio_free test pin_used for tracing the pin usage. However, gpiolib already checks FLAG_REQUESTED flag for the same purpose. So remove the redundant implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08gpio: timberdale: Switch to devm_ioremap_resource()Amitoj Kaur Chawla1-17/+4
Replace calls to devm_request_mem_region and devm_ioremap with a direct call to devm_ioremap_resource instead and modify error handling. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the Coccinelle semantic patch that is used to make this change is as follows: //<smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size,e1,e; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start = e1 e = -devm_ioremap(dev,res->start,size); +devm_ioremap_resource(dev,res); if -(e == NULL) +(IS_ERR(e)) { ... -return ...; +return PTR_ERR(e); } //</smpl> Further, updated error handling by hand as devm_ioremap_resource gives appropriate error messages, so remove unnecessary error messages. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08gpio: ts4800: Add IMX51 dependencyJulien Grossholtz1-0/+1
The TS-4800 is an i.MX515 board. Its GPIO driver should only be compiled for this CPU or for test builds. Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08Merge branch 'devm-gpiochip-add-data' into develLinus Walleij60-470/+218
2016-03-07gpiolib: rewrite gpiodev_add_to_listBamvor Jian Zhang1-40/+25
The original code of gpiodev_add_to_list is not very clear which lead to bugs or compiling warning, reference the following patches: Bugs: 1. Commit ef7c7553039b ("gpiolib: improve overlap check of range of gpio"). 2. Commit 96098df125c0 ("gpiolib: fix chip order in gpio list") Warning: 1. Commit e28ecca6eac4 ("gpio: fix warning about iterator"). of gpio"). There is a off-list discussion about how to improve it consequently. This commit try to follow this by rewriting the whole functions. Tested pass with my gpio mockup driver and test scripts[1]. [1] http://www.spinics.net/lists/linux-gpio/msg09598.html Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07gpio: moxart: Allow compile test buildAxel Lin1-1/+1
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07gpio: moxart: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-3/+0
These fields are initialized by bgpio_init() with exactly the same settings so remove the redundant code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: present the consumer of a line to userspaceLinus Walleij1-4/+4
I named the field representing the current user of GPIO line as "label" but this is too vague and ambiguous. Before anyone gets confused, rename it to "consumer" and indicate clearly in the documentation that this is a string set by the user of the line. Also clean up leftovers in the documentation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: fix abi regression in sysfsBamvor Jian Zhang1-1/+11
We started to assign the gpio_device as parent for the sysfs but this changes the expected layout of sysfs. Restore the previous behaviour. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: mb86s7x: Allow compile test buildAxel Lin1-1/+1
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: pisosr: Use gpiod_set_value_cansleep in pisosr_gpio_refresh()Axel Lin1-2/+2
This driver has .can_sleep flag set. So the pisosr_gpio_get() can be called from contexts that can sleep. Thus use the cansleep() variant in pisosr_gpio_refresh(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: pisosr: Use devm_gpiod_get_optional for gpio->load_gpioAxel Lin1-7/+4
gpio->load_gpio is optional, so use devm_gpiod_get_optional instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: xgene: fix type of variable containing error codesAndrzej Hajda1-1/+1
ret variable can contain error values and is compared with zero. Its type must be signed. The problem has been detected using coccinelle script scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ts4800: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-2/+0
Both chip->base and chip->label are correctly set by bgpio_init(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: brcmstb: Use list_for_each_entry at appropriate placesAxel Lin1-9/+4
Use list_for_each_entry to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ath79: Check valid gpio count for both DT and non-DT casesAxel Lin1-4/+5
Move the code checking valid gpio count to cover both DT and non-DT cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25Merge branch 'devm_gpiochip' of https://github.com/ldewangan/linux-upstream ↵Linus Walleij59-470/+176
into devm-gpiochip-add-data
2016-02-25gpio: pisosr: Use devm_gpiod_get_optional for gpio->load_gpioAxel Lin1-7/+4
gpio->load_gpio is optional, so use devm_gpiod_get_optional instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: xgene: fix type of variable containing error codesAndrzej Hajda1-1/+1
ret variable can contain error values and is compared with zero. Its type must be signed. The problem has been detected using coccinelle script scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ts4800: Drop redundant code to set already initialized gpio_chip fieldsAxel Lin1-2/+0
Both chip->base and chip->label are correctly set by bgpio_init(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: brcmstb: Use list_for_each_entry at appropriate placesAxel Lin1-9/+4
Use list_for_each_entry to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ath79: Check valid gpio count for both DT and non-DT casesAxel Lin1-4/+5
Move the code checking valid gpio count to cover both DT and non-DT cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: rcar: Add Runtime PM handling for interruptsGeert Uytterhoeven1-0/+42
The R-Car GPIO driver handles Runtime PM for requested GPIOs only. When using a GPIO purely as an interrupt source, no Runtime PM handling is done, and the GPIO module's clock may not be enabled. To fix this: - Add .irq_request_resources() and .irq_release_resources() callbacks to handle Runtime PM when an interrupt is requested, - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM when e.g. disabling/enabling an interrupt, or configuring the interrupt type. Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS" Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: Propagate all errors in devm_get_gpiod_from_child()Geert Uytterhoeven1-1/+1
devm_get_gpiod_from_child() tries several property suffixes to find a GPIO descriptor. If all suffixes fail and no probe deferral has been detected, it returns the error of the last try. However, if any but the last try fails with a real error (e.g. -EBUSY), this error is not propagated, and -ENOENT will be returned. This confuses drivers that e.g. want to detect if a GPIO is already in use. To fix this, change the loop logic to continue on -ENOENT, which indicates the property was not found and the next suffix should be tried, and propagate all other detected errors. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: xgene: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+1
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: xgene-sb: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-2/+1
Use devm_gpiochip_add_data() for GPIO registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: wm8994: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-14/+3
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-02-23gpio: wm8350: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-02-23gpio: wm8350: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-02-23gpio: vx855: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-11/+1
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: viperboard: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-20/+4
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: ucb1400: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-2/+1
Use devm_gpiochip_add_data() for GPIO registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: twl6040: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-8/+1
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: ts5500: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-6/+3
Use devm_gpiochip_add_data() for GPIO registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: ts4800: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-11/+1
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: tps65912: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: tps65910: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: tps6586x: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-10/+2
Use devm_gpiochip_add_data() for GPIO registration and remove the need of driver callback .remove. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-02-23gpio: timberdale Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan1-3/+1
Use devm_gpiochip_add_data() for GPIO registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 17:43:27 +0000