summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-03-19mfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron ↵Michael Brunner2-0/+29
PLD driver This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6 and COMe-cHL6 to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Acked-by: Christian Rauch <christian.rauch@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19gpio: ich: Add support for Intel AvotonVincent Donnefort1-1/+25
This patch adds support for Atom C2000 series (Avoton and Rangeley). And has the following options: - New addresses register. - Caching output levels (see Intel external design spec, table 48-29) - No hardware blink. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19gpio: ich: Add output levels cache supportVincent Donnefort1-2/+19
This patch allows GPIO driver to cache GPIO_LVL output registers. The aim is to support chipsets on which GPIO_LVL value can't be read for output pins. Caching output levels implies the first output values reading as 0. The driver so can't be aware of set values GPIOs by bootloader or BIOS. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19gpio: ich: Add support for multiple register addressesVincent Donnefort1-12/+31
This patch introduces regs and reglen pointers which allow a chipset to have register addresses differing from ICH ones. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19gpio: ich: Add blink capability optionVincent Donnefort1-1/+9
This patch allows gpio_ich driver to be aware of non blink capable chipsets. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: lpc_ich: Add support for Intel Avoton GPIOsVincent Donnefort1-0/+1
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: da9063: Add support for production silicon variant codeOpensource [Steve Twiss]1-11/+14
Add the correct silicon variant code ID (0x5) to the driver. This new code is the 'production' variant code ID for DA9063. This patch will remove the older variant code ID which matches the pre-production silicon ID (0x3) for the DA9063 chip. There is also some small amount of correction done in this patch: it splits the revision code and correctly names it according to the hardware specification and moves the dev_info() call before the variant ID test. Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: wm8400-core: Remove unnecessary gotoSachin Kamat1-17/+5
Return directly to avoid redundant lines of code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Add realtek USB card reader driverRoger Tseng3-0/+771
Realtek USB card reader provides a channel to transfer command or data to flash memory cards. This driver exports host instances for mmc and memstick subsystems and handles basic works. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: stw481x: Check the return value of devm_regmap_init_i2cSachin Kamat1-0/+6
devm_regmap_init_i2c can fail. Check for it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: stw481x: Staticize stw481x_regmap_configSachin Kamat1-1/+1
stw481x_regmap_config is local to this file. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max14577: Include missing err.hSachin Kamat1-0/+1
Add this header explicitly for IS_ERR and friends. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: vexpress-sysreg: Initialize 'site' variableSemen Protsenko1-1/+1
'site' variable should be initialized with 0 so that when 'site' property doesn't exist in DTB it can be handled correctly. '0' value means board site number is motherboard (see Documentation/devicetree/bindings/arm/vexpress.txt for details). Signed-off-by: Semen Protsenko <semen.protsenko@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: 88pm800: Fix I2C device resource leak if probe failsKrzysztof Kozlowski1-2/+1
During probe the driver allocates two dummy I2C devices for subchips in function pm800_pages_init(). Additionally this function allocates regmaps for these subchips. If any of these steps fail then these dummy I2C devices are not freed and resources leak. On pm800_pages_init() fail the driver must call pm800_pages_exit() to unregister dummy I2C devices. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Trivial: Fix a grammar issues in MFD KconfigLaszlo Papp1-8/+8
s/to support for/to add support for/ Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: ti_am335x_tscadc: Use devm_ioremap_resource()Jingoo Han1-19/+4
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: da9052: Fix volatile register definition ommissionsanthony.olech.opensource@diasemi.com1-0/+3
Three of the PMIC registers have some bits that are changed autonomously by the PMIC itself (some time) after being set by some component driver of the DA9052 PMIC and hence they need to be marked as volatile so that the regmap API will not cache their values. Acked-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-1/+11
During probe the driver allocates dummy I2C devices for MUIC and haptic with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() and i2c_unregister_device(). If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: 88pm860x: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+5
During probe the driver allocates dummy I2C device for companion chip with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by regmap_init_i2c(). If i2c_new_dummy() fails for companion device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: 88pm860x: Fix I2C device resource leak on regmap init failKrzysztof Kozlowski1-0/+1
During probe the driver allocates dummy I2C device for companion chip and then allocates a regmap for it. If regmap_init_i2c() fails then the I2C driver (allocated with i2c_new_dummy()) is not freed and this resource leaks. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+9
During probe the driver allocates dummy I2C devices for RTC and ADC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+4
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+4
During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+18
During probe the driver allocates dummy I2C devices for RTC, haptic and MUIC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Delete non-required instances of include <linux/init.h>Paul Gortmaker21-21/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: stmpe: Trivial: Remove unnecessary semicolonSachin Kamat1-1/+1
Semicolon is not necessary after the while statement. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65218: Add driver for the TPS65218 PMICKeerthy3-0/+298
The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tc3589x: Reform device tree probingLinus Walleij1-25/+59
This changes the following mechanisms in the TC3589x device tree probing path: - Use the .of_match_table in struct device_driver to match the device in the device tree. - Add matches for the proper compatible strings "toshiba,..." and all sub-variants, just as is done for the .id matches. - Move over all the allocation of platform data etc to the tc3589x_of_probe() function and follow the pattern of passing a platform data pointer back, or an error pointer on error, as found in the STMPE driver. - Match the new (proper) compatible strings for the GPIO and keypad MFD cells. - Use of_device_is_compatible() rather than just !strcmp() to discover which cells to instantiate. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: wm5110: Make additional DSP registers available to the userCharles Keepax1-0/+168
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: wm5102: Make additional DSP registers available to the userCharles Keepax1-0/+34
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max14577: Add of_compatible to extcon mfd_cellKrzysztof Kozlowski1-1/+4
Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon driver. If entry with such compatible is present in the DTS, the extcon driver will have of_node set. This may be useful for extcon consumers and it is documented in bindings documentation. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Include all drivers in subsystem menuLinus Walleij1-3/+3
It is currently not possible to select the SA1100 or Vexpress drivers in the MFD subsystem, because the menu for the entire subsystem ends before these options are presented. Move the main menu closing and the endif for HAS_IOMEM to the end of the file so these are selectable again. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19Merge branch 'ib-mfd-io-3.15' into HEADLee Jones5-132/+210
2014-03-19Merge branch 'ib-mfd-omap' into HEADLee Jones3-104/+91
2014-03-19Merge branch 'ib-mfd-regulator-3.15' into HEADLee Jones5-15/+683
2014-03-18mfd: wm5102: Update register patchCharles Keepax1-0/+1
Update the register patch based on latest evaluation of the device. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18regulator: Add support for S2MPA01 regulatorSachin Kamat3-0/+489
Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: Add support for S2MPA01 deviceSachin Kamat1-5/+44
Add the necessary entries required for S2MPA01 multi-function device. While at it also convert whitespaces to tabs in core.h. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Silence compiler warningPankaj Dubey1-3/+3
When used 64bit compiler GCC warns as drivers/mfd/sec-core.c:199:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy errorKrzysztof Kozlowski1-0/+4
During probe the sec-core driver allocates dummy I2C device for RTC with i2c_new_dummy() but return value is not checked. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() or i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec: Add support for S2MPS14Krzysztof Kozlowski2-6/+131
Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexesKrzysztof Kozlowski1-4/+4
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding interrupts are named similarly). Use consistent names for interrupts to limit possible errors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Select different RTC regmaps for devicesKrzysztof Kozlowski1-3/+12
This patch prepares for adding support for S2MPS14 RTC driver by selecting different regmaps for S2MPS1X/S5M876X RTC devices. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Add maximum RTC register for regmap configKrzysztof Kozlowski1-0/+2
Add maximum register to the regmap used by rtc-s5m driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Move driver to drivers/iio/adcSebastian Reichel5-11/+11
This is a driver for an A/D converter, which belongs into drivers/iio/adc. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registersSebastian Reichel1-31/+8
Simplify reading and writing of 16 bit TWL registers in the driver by using twl_i2c_read_u16 and twl_i2c_write_u16. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Cleanup driverSebastian Reichel1-73/+72
Some style fixes in twl4030-madc driver. Reported-by: Jonathan Cameron <jic23@kernel.org> Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Add DT support and convert to IIO frameworkSebastian Reichel1-11/+116
This converts twl4030-madc module to use the Industrial IO ADC framework and adds device tree support. Signed-off-by: Sebastian Reichel <sre@debian.org> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Use managed resourcesSebastian Reichel1-9/+6
Update twl4030-madc driver to use managed resources. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13mfd: omap-usb-host: Use clock names as per function for reference clocksRoger Quadros1-6/+6
Use a meaningful name for the reference clocks so that it indicates the function. Update the OMAP4+ USB Host node as well to be in sync with the changes. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-09 13:55:00 +0000