summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-01-07drivers/atm/fore200e.c: use %pM to show MAC addresshartleys1-7/+4
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/firmware/iscsi_ibft.c: use %pM to show MAC addresshartleys1-5/+1
Use the %pM kernel extension to display the MAC address. Also, remove the 'mac' variable and use nic->mac directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/atm/idt77252.c: use %pM to show MAC addresshartleys1-4/+1
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/ixgbe/ixgbe_common.c: use %pM to show MAC addresshartleys1-10/+2
Use the %pM kernel extension to display the MAC address. The only difference in the output is that the MAC address is shown in the usual colon-separated hex notation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/atm/nicstar.c: use %pM to show MAC addresshartleys1-3/+1
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-078139too: make PCI device ids constantMárton Németh2-2/+2
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06drivers/net/mac8390.c: Add mac8390_init functionJoe Perches1-102/+105
Reduce indentation, make code a little neater. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06drivers/net/mac8390.c: Checkpatch cleanupsJoe Perches1-107/+122
Use #include <linux/ not #include <asm/ Add spaces after arguments Comment neatening Make a couple of arrays static const Align function arguments Wrap text at 80 columns where reasonable Cuddle brace else Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06drivers/net/mac8390.c: Convert printk(KERN_<level> to pr_<level>(Joe Perches1-32/+25
Use printk_once Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert printks without KERN_<level> to pr_info and pr_cont Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06drivers/net/mac8390.c: Remove useless memcpy castingJoe Perches1-9/+10
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06drivers/net/mac8390.c: Indent case labelsJoe Perches1-126/+126
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06phy: SMSC device Energy Detect power-down modeGiuseppe Cavallaro1-2/+19
SMSC Ethernet Transceivers (LAN88710, LAN8710, LAN8720, LAN8187, LAN8700, LAN83C185) provide a mechanism to conserve power when the device is not connected to an active link partner (Energy Detect Mode). So this patch enables the Energy Detect power-down mode for these Transceivers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06qlge: Add napi gro frags interface.Ron Mercer1-0/+53
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06qlge: Add RX frame handlers for non-split frames.Ron Mercer1-4/+257
New handlers are added here to handle: 1) Small frames (<256 bytes) in a single small buffer. Allocate a new skb and copy the frame. 2) Large frame (>256 bytes) in a page chunk. Allocate an skb, tack it on frags, post to napi_gro_receive(). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06qlge: Turn on RX header split based on platform.Ron Mercer2-7/+18
Using 4-byte aligned headers is problematic for some architectures. Since qlge uses 4-byte aligned rx buffers we split headers for these architectures into a separate buffer and then recopy to align on 2-byte boundary. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06sky2: Lock transmit queue while disabling deviceMike McCormack1-0/+2
netif_device_detach() does not take the tx_lock, so it's possible that a call to sky2_xmit_frame is still in progress after netif_device_detach() is complete. Take netif_tx_lock() to make sure all transmits have stopped while we're disabling the devices and that no other CPU is still transmitting a frame after we've disabling the device. Proposed fix for "sky2 panic under load" reported by Berck E. Nash. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06sky2: Refactor sky2_get_regs into two functionsMike McCormack1-46/+48
Separate code deciding which registers can be accessed out of sky2_get_regs in preparation for adding more conditions into it. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03axnet_cs: remove unnecessary spin_unlock_irqrestoreKen Kawasaki1-3/+0
axnet_cs: remove unnecessary spin_unlock_irqrestore,spin_lock_irqsave. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03drivers/net/cxgb3: Use kzalloc for allocating only one thingJulia Lawall1-1/+1
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03bonding: allow arp_ip_targets on separate vlans to use arp validationAndy Gospodarek1-0/+11
This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30Merge branch 'master' of ↵David S. Miller65-1734/+1545
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville22-440/+89
Conflicts: drivers/net/wireless/libertas/scan.c
2009-12-29Subject: drivers/net/sh_eth.c: use %pM to shown MAC addressH Hartley Sweeten1-7/+3
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/r8169.c: use %pM to shown MAC addressH Hartley Sweeten1-7/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/octeon/octeon_mgmt.c: use %pM to shown MAC addressH Hartley Sweeten1-5/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/smc911x.c: use %pM to shown MAC addressH Hartley Sweeten1-4/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/sunvnet.c: use %pM to shown MAC addressH Hartley Sweeten1-4/+1
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/usb/catc.c: use %pM to shown MAC addressH Hartley Sweeten1-4/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/s390/net/qeth_l2_main.c: use %pM to shown MAC addressH Hartley Sweeten1-18/+6
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/xilinx_emaclite.c: use %pM to shown MAC addressH Hartley Sweeten1-5/+1
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/via-velocity.c: use %pM to shown MAC addressH Hartley Sweeten1-4/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/usb/rtl8150.c: use %pM to shown MAC addressH Hartley Sweeten1-5/+2
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/igbvf/netdev.c: use %pM to shown MAC addressH Hartley Sweeten1-10/+3
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29drivers/net/lib82596.c: use %pM to shown MAC addressH Hartley Sweeten1-5/+3
Use the %pM kernel extension to display the MAC address. The only difference in the output is that the MAC address is shown in the usual colon-separated hex notation instead of space-separated. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville2-158/+46
This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: remove struct ieee80211_if_init_confJohannes Berg20-143/+143
All its members (vif, mac_addr, type) are now available in the vif struct directly, so we can pass that instead of the conf struct. I generated this patch (except the mac80211 and header file changes) with this semantic patch: @@ identifier conf, fn, hw; type tp; @@ tp fn(struct ieee80211_hw *hw, -struct ieee80211_if_init_conf *conf) +struct ieee80211_vif *vif) { <... ( -conf->type +vif->type | -conf->mac_addr +vif->addr | -conf->vif +vif ) ...> } Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: introduce flush operationJohannes Berg1-0/+11
We've long lacked a good confirmation that frames have really gone out, e.g. before going off-channel for a scan. Add a flush() operation that drivers can implement to provide that confirmation, and use it in a few places: * before scanning sends the nullfunc frames * after scanning sends the nullfunc frames, if any * when going idle, to send any pending frames Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rtl8187: remove priv->modeJohn W. Linville3-7/+4
It is checked in add_interface, but there it is easily replaced with a check of priv->vif. If that information should become necessary, it is available in vif->type anyway. It is also checked in led_turn_on and led_turn_off, where I made the substitutions as described above. Of course, these checks seem to have been incorrect since the driver was using NL80211_IFTYPE_MONITOR to indicate no interface rather than NL80211_IFTYPE_UNSPECIFIED. Anyway, I think these checks may be extraneous...? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rtl8180: remove priv->modeJohn W. Linville2-10/+5
It is only checked in add_interface, and there it is easily replaced with a check of priv->vif. If that information should become necessary, it is available in vif->type anyway. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Cleanup chip handling helper functions.Gertjan van Wingerde9-143/+125
Let each of them take a struct rt2x00_dev pointer as argument instead of a mixture of struct rt2x00_chip and struct rt2x00_dev pointers. Preparation for further clean ups in the rt2x00 chip handling, especially for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: convert RT2800PCI_PCI and RT2800PCI_SOC Kconfig symbols to booleans.Gertjan van Wingerde2-10/+2
There is no need for Kconfig symbols RT2800PCI_PCI and RT2800PCI_SOC to be tristates, as they are only used to check whether RT2800 PCI or SOC support is to be compiled in. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Let rt2800lib check CONFIG_RT2X00_LIB_USB instead of CONFIG_RT2800USBGertjan van Wingerde1-2/+2
rt2800lib currently checks whether RT2800USB is enabled in the configuration. Strictly speaking this is not necessary, it only needs to know whether the generic rt2x00usb library functions are available. Therefore check for RT2X00_LIB_USB instead. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28rt2x00: Fix checks for rt2800 SOC support.Gertjan van Wingerde1-9/+9
Fix checking for SOC support in rt2800pci. The wrong config (an unexisting one) was checked. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Prevent performing "join" before associationJuuso Oikarinen1-1/+1
There is a minor bug in the code causing a "join" to be performed before there is an intention to associate. Fix this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Check vif for NULL when indicating beacon-lossJuuso Oikarinen1-1/+1
Because the interface is started and the vif are created and destroyed separately, there is a slim possibility beacon-loss indications occur while there is no vif - causing a kernel-oops unless checked. Add checking for the vif. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add support for acx_pm_configJuuso Oikarinen5-0/+63
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen7-64/+55
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Fix supported rate managementJuuso Oikarinen6-44/+90
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Change rates configured for templatesJuuso Oikarinen1-1/+2
Previously a "firmware chooses" value was used for the rates of all control message templates set to the firmware. This resulted in a too high rate to be chosen to transmit those messages. Change this by configuring a fixed low rate for the templates. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28wl1271: Add rudimentary ad-hoc supportJuuso Oikarinen1-2/+43
This patch adds rudimentary a-hoc support for the driver. It will allow setting up ad-hoc, and for other devices to scan and join. The beacon and probe response template setting is slightly dirty, and need to be properly implemented with support from mac80211. Also, the SSID is not configured to the firmware - the FW will not be able to respond to probe requests autonomously. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:50:14 +0000