summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller31-112/+321
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-106/+315
Pull networking fixes from David Miller: 1) MLX5 bug fixes from Saeed Mahameed et al: - released wrong resources when firmware timeout happens - fix wrong check for encapsulation size limits - UAR memory leak - ETHTOOL_GRXCLSRLALL failed to fill in info->data 2) Don't cache l3mdev on mis-matches local route, causes net devices to leak refs. From Robert Shearman. 3) Handle fragmented SKBs properly in macsec driver, the problem is that we were mis-sizing the sgvec table. From Jason A. Donenfeld. 4) We cannot have checksum offload enabled for inner UDP tunneled packet during IPSEC, from Ansis Atteka. 5) Fix double SKB free in ravb driver, from Dan Carpenter. 6) Fix CPU port handling in b53 DSA driver, from Florian Dainelli. 7) Don't use on-stack buffers for usb_control_msg() in CAN usb driver, from Maksim Salau. 8) Fix device leak in macvlan driver, from Herbert Xu. We have to purge the broadcast queue properly on port destroy. 9) Fix tx ring entry limit on EF10 devices in sfc driver. From Bert Kenward. 10) Fix memory leaks in team driver, from Pan Bian. 11) Don't setup ipv6_stub before it can be actually used, from Paolo Abeni. 12) Fix tipc socket flow control accounting, from Parthasarathy Bhuvaragan. 13) Fix crash on module unload in hso driver, from Andreas Kemnade. 14) Fix purging of bridge multicast entries, the problem is that if we don't defer it to ndo_uninit it's possible for new entries to get added after we purge. Fix from Xin Long. 15) Don't return garbage for PACKET_HDRLEN getsockopt, from Alexander Potapenko. 16) Fix autoneg stall properly in PHY layer, and revert micrel driver change that was papering over it. From Alexander Kochetkov. 17) Don't dereference an ipv4 route as an ipv6 one in the ip6_tunnnel code, from Cong Wang. 18) Clear out the congestion control private of the TCP socket in all of the right places, from Wei Wang. 19) rawv6_ioctl measures SKB length incorrectly, fix from Jamie Bainbridge. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ipv6: check raw payload size correctly in ioctl tcp: memset ca_priv data to 0 properly ipv6: check skb->protocol before lookup for nexthop net: core: Prevent from dereferencing null pointer when releasing SKB macsec: dynamically allocate space for sglist Revert "phy: micrel: Disable auto negotiation on startup" net: phy: fix auto-negotiation stall due to unavailable interrupt net/packet: check length in getsockopt() called with PACKET_HDRLEN net: ipv6: regenerate host route if moved to gc list bridge: move bridge multicast cleanup to ndo_uninit ipv6: fix source routing qed: Fix error in the dcbx app meta data initialization. netvsc: fix calculation of available send sections net: hso: fix module unloading tipc: fix socket flow control accounting error at tipc_recv_stream tipc: fix socket flow control accounting error at tipc_send_stream ipv6: move stub initialization after ipv6 setup completion team: fix memory leaks sfc: tx ring can only have 2048 entries for all EF10 NICs macvlan: Fix device ref leak when purging bc_queue ...
2017-04-26virtio-net: on tx, only call napi_disable if tx napi is onWillem de Bruijn1-2/+8
As of tx napi, device down (`ip link set dev $dev down`) hangs unless tx napi is enabled. Else napi_enable is not called, so napi_disable will spin on test_and_set_bit NAPI_STATE_SCHED. Only call napi_disable if tx napi is enabled. Fixes: 5a719c2552ca ("virtio-net: transmit napi") Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ibmvnic: Move initialization of sub crqs to ibmvnic_initNathan Fontenot1-11/+12
The sub crq structures are initialized in interrupt context while handling the response to crqs when negotiating capabilities for the driver. The sub crqs do not need to be initialized at this point and can be moved to being done from ibmvnic_init. Moving the init of the sub crqs to ibmvnic_init also allows use to allocate the memory with GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ibmvnic: Split initialization of scrqs to its own routineNathan Fontenot1-47/+54
Split the sending of capability request crqs and the initialization of sub crqs into their own routines. This is a first step to moving the allocation of sub-crqs out of interrupt context. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26macsec: dynamically allocate space for sglistJason A. Donenfeld1-7/+22
We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Revert "phy: micrel: Disable auto negotiation on startup"David S. Miller1-11/+0
This reverts commit 99f81afc139c6edd14d77a91ee91685a414a1c66. It was papering over the real problem, which is fixed by commit f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov1-4/+36
The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25drivers: net: xgene-v2: Fix error return code in xge_mdio_config()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the no PHY found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: fix invalid use of sizeof in qed_alloc_qm_data()Wei Yongjun1-1/+1
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: b5a9ee7cf3be ("qed: Revise QM configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: Fix error in the dcbx app meta data initialization.sudarsana.kalluru@cavium.com1-5/+5
DCBX app_data array is initialized with the incorrect values for personality field. This would prevent offloaded protocols from honoring the PFC. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25netvsc: fix calculation of available send sectionsstephen hemminger2-6/+4
My change (introduced in 4.11) to use find_first_clear_bit incorrectly assumed that the size argument was words, not bits. The effect was only a small limited number of the available send sections were being actually used. This can cause performance loss with some workloads. Since map_words is now used only during initialization, it can be on stack instead of in per-device data. Fixes: b58a185801da ("netvsc: simplify get next send section") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: ethernet: ti: netcp_core: remove unused compl queue mappingIvan Khoronzhuk1-4/+0
This code is unused and probably was unintentionally left while moving completion queue mapping in submit function. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: hso: fix module unloadingAndreas Kemnade1-1/+1
keep tty driver until usb driver is unregistered rmmod hso produces traces like this without that: [40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap [40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800 [40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem [40261.880279] usb 2-2: Manufacturer: Option N.V. [40262.021270] hso 2-2:1.5: Not our interface [40265.556945] hso: unloaded [40265.559875] usbcore: deregistering interface driver hso [40265.595947] Unable to handle kernel NULL pointer dereference at virtual address 00000033 [40265.604522] pgd = ecb14000 [40265.611877] [00000033] *pgd=00000000 [40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect [40265.698211] sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso] [40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6 [40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree) [40265.736938] task: ecb81100 task.stack: ecb82000 [40265.741729] PC is at cdev_del+0xc/0x2c [40265.745666] LR is at tty_unregister_device+0x40/0x50 [40265.750915] pc : [<c027472c>] lr : [<c04b3ecc>] psr: 600b0113 sp : ecb83ea8 ip : eca4f898 fp : 00000000 [40265.763000] r10: 00000000 r9 : 00000000 r8 : 00000001 [40265.768493] r7 : eca4f800 r6 : 00000003 r5 : 00000000 r4 : ffffffff [40265.775360] r3 : c1458d54 r2 : 00000000 r1 : 00000004 r0 : ffffffff [40265.782257] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [40265.789764] Control: 10c5387d Table: acb14019 DAC: 00000051 [40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218) [40265.802062] Stack: (0xecb83ea8 to 0xecb84000) [40265.806640] 3ea0: ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec [40265.815277] 3ec0: eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04 [40265.823883] 3ee0: eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4 [40265.832519] 3f00: ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081 [40265.841125] 3f20: c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88 [40265.849731] 3f40: bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368 [40265.858367] 3f60: ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4 [40265.866973] 3f80: ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220 [40265.875579] 3fa0: bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800 [40265.884216] 3fc0: 7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000 [40265.892822] 3fe0: b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff [40265.901458] [<c027472c>] (cdev_del) from [<c04b3ecc>] (tty_unregister_device+0x40/0x50) [40265.909942] [<c04b3ecc>] (tty_unregister_device) from [<bf7327ec>] (hso_free_interface+0x80/0x144 [hso]) [40265.919982] [<bf7327ec>] (hso_free_interface [hso]) from [<bf7328bc>] (hso_disconnect+0xc/0x18 [hso]) [40265.929718] [<bf7328bc>] (hso_disconnect [hso]) from [<c05a9a04>] (usb_unbind_interface+0x84/0x200) [40265.939239] [<c05a9a04>] (usb_unbind_interface) from [<c04e6960>] (device_release_driver_internal+0x138/0x1cc) [40265.949798] [<c04e6960>] (device_release_driver_internal) from [<c04e6a60>] (driver_detach+0x60/0x6c) [40265.959503] [<c04e6a60>] (driver_detach) from [<c04e5d94>] (bus_remove_driver+0x64/0x8c) [40265.968017] [<c04e5d94>] (bus_remove_driver) from [<c05a8f88>] (usb_deregister+0x5c/0xb8) [40265.976654] [<c05a8f88>] (usb_deregister) from [<c01c4afc>] (SyS_delete_module+0x160/0x1dc) [40265.985443] [<c01c4afc>] (SyS_delete_module) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [40265.994171] Code: c1458d54 e59f3020 e92d4010 e1a04000 (e5941034) [40266.016693] ---[ end trace 9d5ac43c7e41075c ]--- Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed - VF tunnelling support [VXLAN/GENEVE/GRE]Chopra, Manish8-4/+446
This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Add UDP ports in bulletin boardChopra, Manish8-1/+83
This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Configure UDP ports in local context.Chopra, Manish3-36/+52
This patch configures UDP ports locally instead of configuring them in deferred context which would be helpful in synchronizing UDP ports configuration for VFs which will be enabled in further patches. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qede: Disable tunnel offloads for non offloaded UDP portsChopra, Manish1-6/+17
This patch disables tunnel offloads via ndo_features_check() if given UDP port is not offloaded to hardware. This in turn allows to run multiple tunnel interfaces using different UDP ports. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Enable tunnel offloads based on hw configurationChopra, Manish3-11/+46
This patch enables tunnel feature offloads based on hw configuration at initialization time instead of enabling them always. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: refactor tunnelling - API/StructsChopra, Manish7-197/+207
This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25team: fix memory leaksPan Bian1-2/+6
In functions team_nl_send_port_list_get() and team_nl_send_options_get(), pointer skb keeps the return value of nlmsg_new(). When the call to genlmsg_put() fails, the memory is not freed(). This will result in memory leak bugs. Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge tag 'linux-can-fixes-for-4.11-20170425' of ↵David S. Miller5-5/+90
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-04-25 this is a pull request of three patches for net/master. There are two patches by Stephane Grosjean for that add a new variant to the PCAN-Chip USB driver. The other patch is by Maksim Salau, which swtiches the memory for USB transfers from heap to stack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25sfc: tx ring can only have 2048 entries for all EF10 NICsBert Kenward2-1/+5
Fixes: dd248f1bc65b ("sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC") Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25Merge tag 'linux-can-next-for-4.12-20170425' of ↵David S. Miller16-431/+3573
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-04-25 this is a pull request of 21 patches for net-next/master. There are 4 patches by Stephane Grosjean for the PEAK PCAN-PCIe FD CAN-FD boards. The next 7 patches are by Mario Huettel, which add support for M_CAN IP version >= v3.1.x to the m_can driver. A patch by Remigiusz Kołłątaj adds support for the Microchip CAN BUS Analyzer. 8 patches by Oliver Hartkopp complete the initial CAN network namespace support. Wei Yongjun's patch for the ti_hecc driver fixes the return value check in the probe function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25ipvlan: use pernet operations and restrict l3s hooks to master netnsFlorian Westphal2-15/+70
commit 4fbae7d83c98c30efc ("ipvlan: Introduce l3s mode") added registration of netfilter hooks via nf_register_hooks(). This API provides the illusion of 'global' netfilter hooks by placing the hooks in all current and future network namespaces. In case of ipvlan the hook appears to be only needed in the namespace that contains the ipvlan master device (i.e., usually init_net), so placing them in all namespaces is not needed. This switches ipvlan driver to pernet operations, and then only registers hooks in namespaces where a ipvlan master device is set to l3s mode. Extra care has to be taken when the master device is moved to another namespace, as we might have to 'move' the netfilter hooks too. This is done by storing the namespace the ipvlan port was created in. On REGISTER event, do (un)register operations in the old/new namespaces. This will also allow removal of the nf_register_hooks() in a future patch. Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25macvlan: Fix device ref leak when purging bc_queueHerbert Xu1-1/+10
When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916dfb48c ("macvlan: Fix potential use-after free for...") Reported-by: Joe Ghalam <Joe.Ghalam@dell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25usb: plusb: Add support for PL-27A1Roman Spychała2-3/+14
This patch adds support for the PL-27A1 by adding the appropriate USB ID's. This chip is used in the goobay Active USB 3.0 Data Link and Unitek Y-3501 cables. Signed-off-by: Roman Spychała <roed@onet.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: can: usb: gs_usb: Fix buffer on stackMaksim Salau1-5/+12
Allocate buffers on HEAP instead of STACK for local structures that are to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.8 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: usb: Kconfig: Add PCAN-USB X6 device in help textStephane Grosjean1-0/+1
This patch adds a text line in the help section of the CAN_PEAK_USB config item describing the support of the PCAN-USB X6 adapter, which is already included in the Kernel since 4.9. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: usb: Add support of PCAN-Chip USB stamp moduleStephane Grosjean4-0/+77
This patch adds the support of the PCAN-Chip USB, a stamp module for customer hardware designs, which communicates via USB 2.0 with the hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B as well as CAN FD. The physical CAN connection is determined by external wiring. The Stamp module with its single-sided mounting and plated half-holes is suitable for automatic assembly. Note that the chip is equipped with the same logic than the PCAN-USB FD. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: ti_hecc: fix return value check in ti_hecc_probe()Wei Yongjun1-6/+6
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: dabf54dd1c63 ("can: ti_hecc: Convert TI HECC driver to DT only driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: enable module auto loading for virtual CAN interfacesOliver Hartkopp1-2/+5
Autoload the vcan module when a vcan instance is to be created by 'ip link add type vcan' Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: add Virtual CAN Tunnel driver (vxcan)Oliver Hartkopp3-0/+335
Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. See Kconfig entry for details. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: mcba_usb: Add support for Microchip CAN BUS AnalyzerRemigiusz Kołłątaj3-0/+911
SocketCAN driver for Microchip CAN BUS Analyzer (http://www.microchip.com/development-tools/) Changes in v4: - possible memory leak fixed in mcba_usb_write_bulk_callback - LED support added - failure handling in mcba_usb_probe improved - C99 initializers for structs on stack Changes in v3: - improved/simplified CAN ID conversion - functions for transmission of skb and cmd separated - fixed/improved netif_stop_queue handling - style/cosmetic corrections Changes in v2: - Termination handling reimplemented to fit new netlink API (IFLA_CAN_TERMINATION) - Bitrate handling reimplemented to fit new netlink API (IFLA_CAN_BITRATE) - CAN ID conversion refactored (changed from macro to inline functions) - CAN DLC handling using get_can_dlc() - Endianness handling for can_speed introduced - Debugging removed - Redundant error prints removed - Style/cosmetic corrections (i.e. macro names, redefs, inits etc.) Signed-off-by: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable TX FIFO Handling for M_CAN IP version >= v3.1.xMario Huettel1-29/+159
* Added defines for TX Event FIFO Element * Adapted ndo_start_xmit function. For versions >= v3.1.x it uses the TX FIFO to optimize the data throughput. It stores the echo skb at the same index as in the M_CAN's TX FIFO. The frame's message marker is set to this index. This message marker is received in the TX Event FIFO after the message was successfully transmitted. It is used to echo the correct echo skb back to the network stack. * Added m_can_echo_tx_event function. It reads all received message markers in the TX Event FIFO and loops back the corresponding echo skbs. * ISR checks for new TX Event Entry interrupt for version >= 3.1.x. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Configuration for TX and TX event FIFOsMario Huettel1-5/+34
* TX/TX Event FIFO sizes are configured for version >= v3.1.x Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Enable M_CAN version dependent initializationMario Huettel1-71/+269
This patch adapts the initialization of the M_CAN. So it can be used with all versions >= 3.0.x. Changes: * Added version element to m_can_priv structure to hold M_CAN version. * Renamed bittiming structs for version 3.0.x * Added new bittiming structs for version >= 3.1.x * Function alloc_m_can_dev takes 2 new arguments. The TX FIFO size and the base address of the module. * Chip configuration for CAN_CTRLMODE_LOOPBACK is changed: Enabled CCCR_MON bit. In combination with TEST_LBCK it activates the internal loopback mode. Leaving CCCR_MON '0' results in external loopback mode. * Clocks are temporarily enabled by platform_propbe function in order to allow read access to the Core Release register and the Control Register. Registers are used to detect M_CAN version and optional Non-ISO Feature. Initialization of M_CAN for version >= 3.1.x: * TX FIFO of M_CAN is used to transmit frames. The driver does not need to stop the tx queue after each frame sent. * Initialization of TX Event FIFO is added. * NON-ISO is fixed for all M_CAN versions < 3.2.x. Version 3.2.x _can_ have the NISO (Non-ISO) bit which can switch the mode of the M_CAN to Non-ISO mode. This bit does not have to be writeable. Therefore it is checked. If it is writable Non-ISO support is added to the controllers supported CAN modes. New Functions: * Function to check the Core Release version. The read value determines the behaviour of the driver. * Function to check if the NISO bit for version >= 3.2.x is implemented. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Updated register defines to newest versionMario Huettel1-65/+125
* Updated register defines to newest M_CAN version (v3.2.1). * Changed defines in the whole code. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed virtual address from printMario Huettel1-2/+2
The virtual address of the device was printed. I removed it because it leaks internal information. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Removed initialization of FIFO water marksMario Huettel1-2/+2
FIFO water marks disabled because the driver doesn't handle water mark events. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: m_can: Disabled Interrupt Line 1Mario Huettel1-1/+2
* Disabled interrupt line 1. The driver didn't use it. Signed-off-by: Mario Huettel <mario.huettel@gmx.net> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boardsStephane Grosjean7-0/+1718
This patch adds the support of the PCAN-PCI Express FD boards made by PEAK-System, for computers using the PCI Express slot. The PCAN-PCI Express FD has one or two CAN FD channels, depending on the model. A galvanic isolation of the CAN ports protects the electronics of the card and the respective computer against disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated with ambient temperatures in a range of -40 to +85 °C. Such boards run an extented version of the CAN-FD IP running into USB CAN-FD interfaces from PEAK-System, so this patch adds several new commands and their corresponding data types to the PEAK CAN-FD common definitions header file too. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: move header file to new can common subdirStephane Grosjean2-244/+1
The CAN-FD IP from PEAK-System runs into several kinds of PC CAN-FD interfaces. Up to now, only the USB CAN-FD adapters were supported by the Kernel. In order to prepare the adding of some new non-USB CAN-FD interfaces, this patch moves - and rename - the IP definitions file from its private (usb) sub-directory into a - newly created - CAN specific one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: fix usage of const qualifier in pointers argsStephane Grosjean1-8/+8
Fixes the usage of the const qualifier in the memory pointer arguments of the declared inline functions. By changing the line containing "const", this patch also changes the name of the arg into a more usual one. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-25can: peak: fix usage of usb specific data typeStephane Grosjean2-14/+14
This patch fixes the wrong usage of a specific USB data type into a common header file. This common header file is intended to define the common data types and values that define access to the PEAK-System CAN-FD IP, whatever the PC interface is. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-24virtio-net: keep tx interrupts disabled unless kickWillem de Bruijn1-0/+3
Tx napi mode increases the rate of transmit interrupts. Suppress some by masking interrupts while more packets are expected. The interrupts will be reenabled before the last packet is sent. This optimization reduces the througput drop with tx napi for unidirectional flows such as UDP_STREAM that do not benefit from cleaning tx completions in the the receive napi handler. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: clean tx descriptors from rx napiWillem de Bruijn1-0/+21
Amortize the cost of virtual interrupts by doing both rx and tx work on reception of a receive interrupt if tx napi is enabled. With VIRTIO_F_EVENT_IDX, this suppresses most explicit tx completion interrupts for bidirectional workloads. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: move free_old_xmit_skbsWillem de Bruijn1-30/+30
An upcoming patch will call free_old_xmit_skbs indirectly from virtnet_poll. Move the function above this to avoid having to introduce a forward declaration. This is a pure move: no code changes. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: transmit napiWillem de Bruijn1-9/+67
Convert virtio-net to a standard napi tx completion path. This enables better TCP pacing using TCP small queues and increases single stream throughput. The virtio-net driver currently cleans tx descriptors on transmission of new packets in ndo_start_xmit. Latency depends on new traffic, so is unbounded. To avoid deadlock when a socket reaches its snd limit, packets are orphaned on tranmission. This breaks socket backpressure, including TSQ. Napi increases the number of interrupts generated compared to the current model, which keeps interrupts disabled as long as the ring has enough free descriptors. Keep tx napi optional and disabled for now. Follow-on patches will reduce the interrupt cost. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24virtio-net: napi helper functionsWillem de Bruijn1-30/+35
Prepare virtio-net for tx napi by converting existing napi code to use helper functions. This also deduplicates some logic. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-12 23:03:05 +0000