summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-09-11Merge branch 'for-linus' of ↵Linus Torvalds10-13/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - functional regression fix for sensor-hub driver from Hans de Goede - stop doing device reset for i2c-hid devices, which unbreaks some of them (and is in line with the specification), from Kai-Heng Feng - error handling fix for hid-core from Gustavo A. R. Silva - functional regression fix for some Elan panels from Benjamin Tissoires - a few new device ID additions and misc small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: Don't reset device upon system resume HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report HID: core: fix NULL pointer dereference HID: core: fix grouping by application HID: multitouch: fix Elan panels with 2 input modes declaration HID: hid-saitek: Add device ID for RAT 7 Contagion HID: core: fix memory leak on probe HID: input: fix leaking custom input node name HID: add support for Apple Magic Keyboards HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen HID: intel-ish-hid: Enable Sunrise Point-H ish driver
2018-09-11drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunkChristian König1-8/+15
Slowly leaking memory one page at a time :) Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds9-12/+33
Pull rdma fixes from Jason Gunthorpe: "This fixes one major regression with NFS and mlx4 due to the max_sg rework in this merge window, tidies a few minor error_path regressions, and various small fixes. The HFI1 driver is broken this cycle due to a regression caused by a PCI change, it is looking like Bjorn will merge a fix for this. Also, the lingering ipoib issue I mentioned earlier still remains unfixed. Summary: - Fix possible FD type confusion crash - Fix a user trigger-able crash in cxgb4 - Fix bad handling of IOMMU resources causing user controlled leaking in bnxt - Add missing locking in ipoib to fix a rare 'stuck tx' situation - Add missing locking in cma - Add two missing missing uverbs cleanups on failure paths, regressions from this merge window - Fix a regression from this merge window that caused RDMA NFS to not work with the mlx4 driver due to the max_sg changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx4: Ensure that maximal send/receive SGE less than supported by HW RDMA/cma: Protect cma dev list with lock RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one() bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler iw_cxgb4: only allow 1 flush on user qps IB/core: Release object lock if destroy failed RDMA/ucma: check fd type in ucma_migrate_id()
2018-09-11staging: vboxvideo: Change address of scanout buffer on page-flipHans de Goede1-0/+5
Commit 2408898e3b6c ("staging: vboxvideo: Add page-flip support") only calls vbox_crtc_do_set_base() on page-flips, but despite that function's name it only pins the new fb, unpins the old fb and sets vbox_crtc->fb_offset. It does not program the hardware to scan out at the new vbox_crtc->fb_offset value. This was causing only every other frame (assuming page-flipping between 2 buffers) to be shown since we kept scanning out of the old (now unpinned!) buffer. This commit fixes this by adding code to vbox_crtc_page_flip() to tell the hardware to scanout from the new fb_offset. Fixes: 2408898e3b6c ("staging: vboxvideo: Add page-flip support") Cc: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11staging: vboxvideo: Fix IRQs no longer workingHans de Goede1-0/+7
Commit 1daddbc8dec5 ("staging: vboxvideo: Update driver to use drm_dev_register.") replaced the obsolere drm_get_pci_dev() with normal pci probe and remove functions. But the new vbox_pci_probe() is missing a pci_enable_device() call, causing interrupts to not be delivered. This causes resizes of the vm window to not get seen by the drm/kms code. This commit adds the missing pci_enable_device() call, fixing this. Fixes: 1daddbc8dec5 ("staging: vboxvideo: Update driver to use ...") Cc: Fabio Rafael da Rosa <fdr@pid42.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11of: fix phandle cache creation for DTs with no phandlesRob Herring1-0/+3
With commit 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()"), a G3 PowerMac fails to boot. The root cause is the DT for this system has no phandle properties when booted with BootX. of_populate_phandle_cache() does not handle the case of no phandles correctly. The problem is roundup_pow_of_two() for 0 is undefined. The implementation subtracts 1 underflowing and then things are in the weeds. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Cc: stable@vger.kernel.org # 4.17+ Reported-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-11drm/i915/overlay: Allocate physical registers from stolenChris Wilson1-153/+75
Given that we are now reasonably confident in our ability to detect and reserve the stolen memory (physical memory reserved for graphics by the BIOS) for ourselves on most machines, we can put it to use. In this case, we need a page to hold the overlay registers. On an i915g running MythTv, H Buus noticed that commit 6a2c4232ece145d8b5a8f95f767bd6d0d2d2f2bb Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 4 04:51:40 2014 -0800 drm/i915: Make the physical object coherent with GTT introduced stuttering into his video playback. After discarding the likely suspect of it being the physical cursor updates, we were left with the use of the phys object for the overlay. And lo, if we completely avoid using the phys object (allocated just once on module load!) by switching to stolen memory, the stuttering goes away. For lack of a better explanation, claim victory and kill two birds with one stone. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107600 Fixes: 6a2c4232ece1 ("drm/i915: Make the physical object coherent with GTT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-1-chris@chris-wilson.co.uk (cherry picked from commit c8124d399224d626728e2ffb95a1d564a7c06968) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-09-11PCI: pciehp: Fix hot-add vs powerfault detection orderKeith Busch1-9/+9
If both hot-add and power fault were observed in a single interrupt, we handled the hot-add first, then the power fault, in this path: pciehp_ist if (events & (PDC | DLLSC)) pciehp_handle_presence_or_link_change case OFF_STATE: pciehp_enable_slot __pciehp_enable_slot board_added pciehp_power_on_slot ctrl->power_fault_detected = 0 pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC) pciehp_green_led_on(p_slot) # power LED on pciehp_set_attention_status(p_slot, 0) # attention LED off if ((events & PFD) && !ctrl->power_fault_detected) ctrl->power_fault_detected = 1 pciehp_set_attention_status(1) # attention LED on pciehp_green_led_off(slot) # power LED off This left the attention indicator on (even though the hot-add succeeded) and the power indicator off (even though the slot power was on). Fix this by checking for power faults before checking for new devices. Prior to 0e94916e6091, this was successful because everything was chained through work queues and the order was: INT_PRESENCE_ON -> INT_POWER_FAULT -> ENABLE_REQ The ENABLE_REQ cleared the power fault at the end, but now everything is handled inline with the interrupt thread, such that the work ENABLE_REQ was doing happens before power fault handling now. Fixes: 0e94916e6091 ("PCI: pciehp: Handle events synchronously") Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2018-09-11switchtec: Fix Spectre v1 vulnerabilityGustavo A. R. Silva1-0/+4
p.port can is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/pci/switch/switchtec.c:912 ioctl_port_to_pff() warn: potential spectre issue 'pcfg->dsp_pff_inst_id' [r] Fix this by sanitizing p.port before using it to index pcfg->dsp_pff_inst_id Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Cc: stable@vger.kernel.org
2018-09-11Revert "PCI: Add ACS quirk for Intel 300 series"Mika Westerberg1-6/+0
This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series"). It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear As Read Only" has been fixed in 300 series chipsets, even though the datasheet [1] claims otherwise. To make ACS work properly on 300 series root ports, revert the faulty commit. [1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.18+
2018-09-11Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixesDave Airlie16-114/+297
A bunch of fixes for MST/runpm problems and races, as well as fixes for issues that prevent more recent laptops from booting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==GF63dy8a9j611=-0x8G6FRu7uC-ZQypsLO_hqV4OAcA@mail.gmail.com
2018-09-10drm/amdgpu: move PSP init prior to IH in gpu resetEmily Deng1-1/+1
since we use PSP to program IH regs now Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Fix SDMA hang in prt mode v2Tao Zhou1-2/+5
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue Affected ASICs: VEGA10 VEGA12 RV1 RV2 v2: add reg clear for SDMA1 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun Li <yukun1.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: fix amdgpu_mn_unlock() in the CS error pathChristian König1-1/+1
Avoid unlocking a lock we never locked. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10dm thin metadata: try to avoid ever aborting transactionsJoe Thornber2-9/+100
Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-10Merge tag 'gvt-fixes-2018-09-10' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi2-13/+17
drm-intel-fixes gvt-fixes-2018-09-10 - KVM mm access reference fix (Zhenyu) - Fix child device config length for virtual opregion (Weinan) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180910092212.GZ20737@zhen-hp.sh.intel.com
2018-09-10Revert "cdc-acm: implement put_char() and flush_chars()"Oliver Neukum2-74/+0
This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0. The patch causes a regression, which I cannot find the reason for. So let's revert for now, as a revert hurts only performance. Original report: I was trying to resolve the problem with Oliver but we don't get any conclusion for 5 months, so I am now sending this to mail list and cdc_acm authors. I am using simple request-response protocol to obtain the boiller parameters in constant intervals. A simple one transaction is: 1. opening the /dev/ttyACM0 2. sending the following 10-bytes request to the device: unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03}; 3. reading response (frame of 74 bytes length). 4. closing the descriptor I am doing this transaction with 5 seconds intervals. Before the bad commit everything was working correctly: I've got a requests and a responses in a timely manner. After the bad commit more time I am using the kernel module, more problems I have. The graph [2] is showing the problem. As you can see after module load all seems fine but after about 30 minutes I've got a plenty of EAGAINs when doing read()'s and trying to read back the data. When I rmmod and insmod the cdc_acm module again, then the situation is starting over again: running ok shortly after load, and more time it is running, more EAGAINs I have when calling read(). As a bonus I can see the problem on the device itself: The device is configured as you can see here on this screen [3]. It has two transmision LEDs: TX and RX. Blink duration is set for 100ms. This is a recording before the bad commit when all is working fine: [4] And this is with the bad commit: [5] As you can see the TX led is blinking wrongly long (indicating transmission?) and I have problems doing read() calls (EAGAIN). Reported-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: Change usb_of_get_companion_dev() place to usb/commonYoshihiro Shimoda2-26/+25
Since renesas_usb3 udc driver calls usb_of_get_companion_dev() which is on usb/core/of.c, build error like below happens if we disable CONFIG_USB because the usb/core/ needs CONFIG_USB: ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! According to the usb/gadget/Kconfig, "NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!". So, to fix the issue, this patch changes the usb_of_get_companion_dev() place from usb/core/of.c to usb/common/common.c to be called by both host and gadget. Reported-by: John Garry <john.garry@huawei.com> Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: xhci: fix interrupt transfer error happened on MTK platformsChunfeng Yun1-0/+4
The MTK xHCI controller use some reserved bytes in endpoint context for bandwidth scheduling, so need keep them in xhci_endpoint_copy(); The issue is introduced by: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") It resets endpoints and will drop bandwidth scheduling parameters used by interrupt or isochronous endpoints on MTK xHCI controller. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10qmi_wwan: Support dynamic config on Quectel EP06Kristian Evensen1-1/+29
Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB interfaces, without the device changing VID/PID or configuration number. When the configuration is updated and interfaces are added/removed, the interface numbers change. This means that the current code for matching EP06 does not work. This patch removes the current EP06 interface number match, and replaces it with a match on class, subclass and protocol. Unfortunately, matching on those three alone is not enough, as the diag interface exports the same values as QMI. The other serial interfaces + adb export different values and do not match. The diag interface only has two endpoints, while the QMI interface has three. I have therefore added a check for number of interfaces, and we ignore the interface if the number of endpoints equals two. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10drm/i915/bdw: Increase IPS disable timeout to 100msImre Deak1-2/+6
During IPS disabling the current 42ms timeout value leads to occasional timeouts, increase it to 100ms which seems to get rid of the problem. References: https://bugs.freedesktop.org/show_bug.cgi?id=107494 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107562 Reported-by: Diego Viola <diego.viola@gmail.com> Tested-by: Diego Viola <diego.viola@gmail.com> Cc: Diego Viola <diego.viola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905100005.7663-1-imre.deak@intel.com (cherry picked from commit acb3ef0ee40ea657280a4a11d9f60eb2937c0dca) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-09-10ethernet: renesas: convert to SPDX identifiersKuninori Morimoto3-5/+3
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10staging: gasket: TODO: re-implement using UIOAhmed S. Darwish1-0/+13
The gasket in-kernel framework, recently introduced under staging, re-implements what is already long-time provided by the UIO subsystem, with extra PCI BAR remapping and MSI conveniences. Before moving it out of staging, make sure we add the new bits to the UIO framework instead, then transform its signle client, the Apex driver, to a proper UIO driver (uio_driver.h). Link: https://lkml.kernel.org/r/20180828103817.GB1397@do-kernel Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_write() fix break conditionNicholas Piggin1-1/+6
Commit 550ddadcc758 ("tty: hvc: hvc_write() may sleep") broke the termination condition in case the driver stops accepting characters. This can result in unnecessary polling of the busy driver. Restore it by testing the hvc_push return code. Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop batchingNicholas Piggin1-2/+22
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") removes get_chars batching entirely, which slows down large console operations like paste -- virtio console "feels worse than a 9600 baud serial line," reports Matteo. This adds back batching in a more latency friendly way. If the caller can sleep then we try to fill the entire flip buffer, releasing the lock and scheduling between each iteration. If it can not sleep, then batches are limited to 128 bytes. Matteo confirms this fixes the performance problem. Latency testing the powerpc OPAL console with OpenBMC UART with a large paste shows about 0.25ms latency, which seems reasonable. 10ms latencies were typical for this case before the latency breaking work, so we still see most of the benefit. kopald-1204 0d.h. 5us : hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : __hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : _raw_spin_lock_irqsave <-__hvc_poll kopald-1204 0d.h. 5us : tty_port_tty_get <-__hvc_poll kopald-1204 0d.h. 6us : _raw_spin_lock_irqsave <-tty_port_tty_get kopald-1204 0d.h. 6us : _raw_spin_unlock_irqrestore <-tty_port_tty_get kopald-1204 0d.h. 6us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 36us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 65us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 65us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 66us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 94us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 124us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 124us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 125us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 154us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 183us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 213us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 242us : _raw_spin_unlock_irqrestore <-__hvc_poll kopald-1204 0d.h. 242us : tty_flip_buffer_push <-__hvc_poll kopald-1204 0d.h. 243us : queue_work_on <-tty_flip_buffer_push kopald-1204 0d.h. 243us : tty_kref_put <-__hvc_poll kopald-1204 0d.h. 243us : hvc_kick <-hvc_handle_interrupt kopald-1204 0d.h. 243us : wake_up_process <-hvc_kick kopald-1204 0d.h. 244us : try_to_wake_up <-hvc_kick kopald-1204 0d.h. 244us : _raw_spin_lock_irqsave <-try_to_wake_up kopald-1204 0d.h. 244us : _raw_spin_unlock_irqrestore <-try_to_wake_up Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop hangNicholas Piggin1-2/+5
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") causes the virtio console to hang at times (e.g., if you paste a bunch of characters to it. The reason is that get_chars must return 0 before we can be sure the driver will kick or poll input again, but this change only scheduled a poll if get_chars had returned a full count. Change this to poll on any > 0 count. Reported-by: Matteo Croce <mcroce@redhat.com> Reported-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10staging/fbtft: Update TODO and mailing listsDaniel Vetter1-0/+4
Motivated by the ksummit-discuss discussion. Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)Gao Xiang1-2/+2
This patch follows commit 1751e8a6cb93 ("Rename superblock flags (MS_xyz -> SB_xyz)") and after commit ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled"), there is no MS_RDONLY and MS_NOATIME at all. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09net: ena: fix incorrect usage of memory barriersNetanel Belgazal4-34/+26
Added memory barriers where they were missing to support multiple architectures, and removed redundant ones. As part of removing the redundant memory barriers and improving performance, we moved to more relaxed versions of memory barriers, as well as to the more relaxed version of writel - writel_relaxed, while maintaining correctness. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix missing calls to READ_ONCENetanel Belgazal1-4/+4
Add READ_ONCE calls where necessary (for example when iterating over a memory field that gets updated by the hardware). Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix missing lock during device destructionNetanel Belgazal1-13/+7
acquire the rtnl_lock during device destruction to avoid using partially destroyed device. ena_remove() shares almost the same logic as ena_destroy_device(), so use ena_destroy_device() and avoid duplications. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix potential double ena_destroy_device()Netanel Belgazal1-0/+5
ena_destroy_device() can potentially be called twice. To avoid this, check that the device is running and only then proceed destroying it. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix device destruction to gracefully free resourcesNetanel Belgazal1-6/+7
When ena_destroy_device() is called from ena_suspend(), the device is still reachable from the driver. Therefore, the driver can send a command to the device to free all resources. However, in all other cases of calling ena_destroy_device(), the device is potentially in an error state and unreachable from the driver. In these cases the driver must not send commands to the device. The current implementation does not request resource freeing from the device even when possible. We add the graceful parameter to ena_destroy_device() to enable resource freeing when possible, and use it in ena_suspend(). Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix driver when PAGE_SIZE == 64kBNetanel Belgazal2-5/+16
The buffer length field in the ena rx descriptor is 16 bit, and the current driver passes a full page in each ena rx descriptor. When PAGE_SIZE equals 64kB or more, the buffer length field becomes zero. To solve this issue, limit the ena Rx descriptor to use 16kB even when allocating 64kB kernel pages. This change would not impact ena device functionality, as 16kB is still larger than maximum MTU. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09net: ena: fix surprise unplug NULL dereference kernel crashNetanel Belgazal1-2/+2
Starting with driver version 1.5.0, in case of a surprise device unplug, there is a race caused by invoking ena_destroy_device() from two different places. As a result, the readless register might be accessed after it was destroyed. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fix from Thomas Gleixner: "A single fix to prevent allocating excessive memory in the GIC/ITS driver. While the subject of the patch might suggest otherwise this is a real fix as some SoCs exceed the memory allocation limits and fail to boot" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint
2018-09-09Merge tag 'for_linus' of ↵Linus Torvalds2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random driver fix from Ted Ts'o: "Fix things so the choice of whether or not to trust RDRAND to initialize the CRNG is configurable via the boot option random.trust_cpu={on,off}" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: make CPU trust a boot parameter
2018-09-09Merge tag 'iio-fixes-4.19a' of ↵Greg Kroah-Hartman2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.19 cycle. * ad9523 - sysfs write should return the number of characters used or an error, not 0 which could result in an infinite loop in userspace. * lsm6dsx - Fix computation of length when updating the watermark to include timestamps avoiding the watermark being set earlier than intended. * maxim_thermocouple - Revert a patch adding the max31856 as it's not actually compatible with the register set that this driver supports. * si1133 - Fix an impossible value check so we don't always error out whether the passed in value is good or bad.
2018-09-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds3-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
2018-09-07xen/netfront: fix waiting for xenbus state changeJuergen Gross1-14/+10
Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07Merge branch 'i2c/for-current' of ↵Linus Torvalds5-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - bugfixes for uniphier, i801, and xiic drivers - ID removal (never produced) for imx - one MAINTAINER addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xiic: Record xilinx i2c with Zynq fragment i2c: xiic: Make the start and the byte count write atomic i2c: i801: fix DNV's SMBCTRL register offset i2c: imx-lpi2c: Remove mx8dv compatible entry dt-bindings: imx-lpi2c: Remove mx8dv compatible entry i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP i2c: uniphier: issue STOP only for last message or I2C_M_STOP
2018-09-07r8169: set TxConfig register after TX / RX is enabled, just like RxConfigMaciej S. Szmigiero1-1/+1
Commit 3559d81e76bf ("r8169: simplify rtl_hw_start_8169") changed order of two register writes: 1) Caused RxConfig to be written before TX / RX is enabled, 2) Caused TxConfig to be written before TX / RX is enabled. At least on XIDs 10000000 ("RTL8169sb/8110sb") and 18000000 ("RTL8169sc/8110sc") such writes are ignored by the chip, leaving values in these registers intact. Change 1) was reverted by commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices"), however change 2) wasn't. In practice, this caused TxConfig's "InterFrameGap time" and "Max DMA Burst Size per Tx DMA Burst" bits to be zero dramatically reducing TX performance (in my tests it dropped from around 500Mbps to around 50Mbps). This patch fixes the issue by moving TxConfig register write a bit later in the code so it happens after TX / RX is already enabled. Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07Merge tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds4-9/+17
Pull MD fixes from Shaohua Li: - Fix a locking issue for md-cluster (Guoqing) - Fix a sync crash for raid10 (Ni) - Fix a reshape bug with raid5 cache enabled (me) * tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md-cluster: release RESYNC lock after the last resync message RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 md/raid5-cache: disable reshape completely
2018-09-07Merge tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-clientLinus Torvalds1-57/+178
Pull ceph fixes from Ilya Dryomov: "Two rbd patches to complete support for images within namespaces that went into -rc1 and a use-after-free fix. The rbd changes have been sitting in a branch for quite a while but couldn't be included into the -rc1 pull request because of a pending wire protocol backwards compatibility fixup that only got committed early this week" * tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client: rbd: support cloning across namespaces rbd: factor out get_parent_info() ceph: avoid a use-after-free in ceph_destroy_options()
2018-09-07Merge tag 'acpi-4.19-rc3' of ↵Linus Torvalds2-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a regression from the 4.18 cycle in the ACPI driver for Intel SoCs (LPSS) and prevent dmi_check_system() from being called on non-x86 systems in the ACPI core. Specifics: - Fix a power management regression in the ACPI driver for Intel SoCs (LPSS) introduced by a system-wide suspend/resume fix during the 4.18 cycle (Zhang Rui). - Prevent dmi_check_system() from being called on non-x86 systems in the ACPI core (Jean Delvare)" * tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / LPSS: Force LPSS quirks on boot ACPI / bus: Only call dmi_check_system() on X86
2018-09-07Merge branch 'acpi-bus'Rafael J. Wysocki1-6/+7
Merge ACPI core fix to avoid calling dmi_check_system() on non-x86. * acpi-bus: ACPI / bus: Only call dmi_check_system() on X86
2018-09-06Merge tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-50/+120
Pull drm fixes from Dave Airlie: "Seems to have been overly quiet this week so I expect next week will be more stuff, just one pull from Rodrigo with i915 fixes in it. Quoting Rodrigo: 'The critical fix here on display side is the DP MST regression one. But this pull also include fixes for DP SST, small VDSC register fix and GVT's bucked with "BXT fixes, two guest warning fixes, dmabuf format mod fix and one for recent multiple VM timeout failure'." * tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm: drm/i915/dp_mst: Fix enabling pipe clock for all streams drm/i915/dsc: Fix PPS register definition macros for 2nd VDSC engine drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse" drm/i915/gvt: Give new born vGPU higher scheduling chance drm/i915/gvt: Fix drm_format_mod value for vGPU plane drm/i915/gvt: move intel_runtime_pm_get out of spin_lock in stop_schedule drm/i915/gvt: Handle GEN9_WM_CHICKEN3 with F_CMD_ACCESS. drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY drm/i915/gvt: emulate gen9 dbuf ctl register access
2018-09-06dm raid: bump target version, update comments and documentationHeinz Mauelshagen1-4/+6
Bump target version to reflect the documented fixes are available. Also fix some code comments (typos and clarity). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-06dm raid: fix RAID leg rebuild errorsHeinz Mauelshagen1-34/+46
On fast devices such as NVMe, a flaw in rs_get_progress() results in false target status output when userspace lvm2 requests leg rebuilds (symptom of the failure is device health chars 'aaaaaaaa' instead of expected 'aAaAAAAA' causing lvm2 to fail). The correct sync action state definitions already exist in decipher_sync_action() so fix rs_get_progress() to use it. Change decipher_sync_action() to return an enum rather than a string for the sync states and call it from rs_get_progress(). Introduce sync_str() to translate from enum to the string that is needed by raid_status(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-06dm raid: fix rebuild of specific devices by updating superblockHeinz Mauelshagen1-0/+5
Update superblock when particular devices are requested via rebuild (e.g. lvconvert --replace ...) to avoid spurious failure with the "New device injected into existing raid set without 'delta_disks' or 'rebuild' parameter specified" error message. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 00:01:33 +0000