summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-08-27Merge branch 'stable/for-jens-4.19' of ↵Jens Axboe3-70/+153
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull Xen block driver fixes from Konrad: "Fix for flushing out persistent pages at a deterministic rate" * 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring xen/blkback: move persistent grants flags to bool xen/blkfront: reorder tests in xlblk_init() xen/blkfront: cleanup stale persistent grants xen/blkback: don't keep persistent grants too long
2018-08-27xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ringJuergen Gross1-1/+0
pers_gnts_lock isn't being used anywhere. Remove it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-08-27xen/blkback: move persistent grants flags to boolJuergen Gross2-13/+7
The struct persistent_gnt flags member is meant to be a bitfield of different flags. There is only PERSISTENT_GNT_ACTIVE flag left, so convert it to a bool named "active". Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-08-27xen/blkfront: reorder tests in xlblk_init()Juergen Gross1-9/+9
In case we don't want pv block devices we should not test parameters for sanity and eventually print out error messages. So test precluding conditions before checking parameters. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-08-27xen/blkfront: cleanup stale persistent grantsJuergen Gross1-4/+90
Add a periodic cleanup function to remove old persistent grants which are no longer in use on the backend side. This avoids starvation in case there are lots of persistent grants for a device which no longer is involved in I/O business. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-08-27xen/blkback: don't keep persistent grants too longJuergen Gross2-46/+50
Persistent grants are allocated until a threshold per ring is being reached. Those grants won't be freed until the ring is being destroyed meaning there will be resources kept busy which might no longer be used. Instead of freeing only persistent grants until the threshold is reached add a timestamp and remove all persistent grants not having been in use for a minute. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-08-27mtd: rawnand: docg4: Remove wrong __init annotationsGeert Uytterhoeven1-2/+2
If gcc (e.g. 4.1.2) decides not to inline init_mtd_structs() and read_id_reg(), this will cause section mismatches, and crashes: WARNING: drivers/mtd/nand/raw/docg4.o(.text+0xc10): Section mismatch in reference from the function docg4_attach_chip() to the function .init.text:init_mtd_structs() The function docg4_attach_chip() references the function __init init_mtd_structs(). This is often because docg4_attach_chip lacks a __init annotation or the annotation of init_mtd_structs is wrong. WARNING: drivers/mtd/nand/raw/docg4.o(.text+0xc3e): Section mismatch in reference from the function docg4_attach_chip() to the function .init.text:read_id_reg() The function docg4_attach_chip() references the function __init read_id_reg(). This is often because docg4_attach_chip lacks a __init annotation or the annotation of read_id_reg is wrong. Fix this by dropping the now incorrect __init annotations from init_mtd_structs() and read_id_reg(). Fixes: 66a38478dcc5b5a3 ("mtd: rawnand: docg4: convert driver to nand_scan()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-27drm/mediatek: fix connection from RDMA2 to DSI1Stu Hsieh1-1/+1
This patch fix connection from RDMA2 to DSI1 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: update some variable name from ovl to compStu Hsieh2-14/+14
This patch update some variable name from ovl to comp Because RDMA would be first HW in ddp, the naming ovl should be change to comp. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: use layer_nr function to get layer number to init planeStu Hsieh2-8/+14
This patch use layer_nr function to get layer number to init plane When plane init in crtc create, it use the number of OVL layer to init plane. That's OVL can read 4 memory address. For mt2712 third ddp, it use RDMA to read memory. RDMA can read 1 memory address, so it just init one plane. For compatibility, this patch use mtk_ddp_comp_layer_nr function to get layer number from their HW component in ddp for plane init. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add function to return RDMA layer numberStu Hsieh1-0/+6
This patch add function to return RDMA layer number RDMA always has one layer. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add function to return OVL layer numberStu Hsieh1-0/+6
This patch add function to return OVL layer number For now, MT8173, MT2712, MT2701 OVL all has 4 layer. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add function to get layer number for componentStu Hsieh1-0/+9
This patch add function to get layer number for component Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add YUYV/UYVY color format support for RDMAStu Hsieh1-0/+20
This patch add YUYV/UYVY color format support for RDMA and transform matrix for YUYV/UYVY. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add the comment about color format setting for OVLStu Hsieh1-0/+5
This patch add the comment about color format setting for OVL Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add RGB color format support for RDMAStu Hsieh1-0/+45
This patch add RGB color format support for RDMA, including RGB565, RGB888, RGBA8888 and ARGB8888. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add memory mode and layer_config for RDMAStu Hsieh1-0/+21
This patch add memory mode for RDMA and layer_config for RDMA If use RDMA to read data from memory, it should set memory mode to RDMA Layer config set the data address and pitch to RDMA from plane setting. Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add connection from RDMA2 to DSI0Stu Hsieh1-0/+4
This patch add connection from RDMA2 to DSI0 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add connection from RDMA1 to DSI0Stu Hsieh1-0/+4
This patch add connection from RDMA1 to DSI0 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add connection from RDMA0 to DSI1Stu Hsieh1-0/+4
This patch add connection from RDMA0 to DSI1 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: add connection from RDMA0 to DPI1Stu Hsieh1-0/+4
This patch add connection from RDMA0 to DPI1 Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-3/+3
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-27drm/mediatek: Convert drm_atomic_helper_suspend/resume()Souptick Joarder1-13/+8
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-08-26hwmon: (nct6775) Fix potential Spectre v1Gustavo A. R. Silva1-0/+2
val can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential spectre issue 'data->temp_src' [r] Fix this by sanitizing val before using it to index data->temp_src Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (adt7475) Make adt7475_read_word() return errorsDan Carpenter1-5/+9
The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (adt7475) Potential error pointer dereferencesDan Carpenter1-3/+8
The adt7475_update_device() function returns error pointers. The problem is that in show_pwmfreq() we dereference it before the check. And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at all. I don't know if it's required, but it silences a static checker warning and it's doesn't hurt anything to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (ina2xx) fix sysfs shunt resistor read accessLothar Felten1-2/+11
fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds11-179/+72
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds5-17/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "A small set of updats/fixes for the irq subsystem: - Allow GICv3 interrupts to be configured as wake-up sources to enable wakeup from suspend - Make the error handling of the STM32 irqchip init function work - A set of small cleanups and improvements" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Allow interrupt to be configured as wake-up sources irqchip/tango: Set irq handler and data in one go dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0 irqchip/stm32: Fix init error handling irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
2018-08-25Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of ↵Linus Torvalds3-27/+87
gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm memory-failure update from Dave Jiang: "As it stands, memory_failure() gets thoroughly confused by dev_pagemap backed mappings. The recovery code has specific enabling for several possible page states and needs new enabling to handle poison in dax mappings. In order to support reliable reverse mapping of user space addresses: 1/ Add new locking in the memory_failure() rmap path to prevent races that would typically be handled by the page lock. 2/ Since dev_pagemap pages are hidden from the page allocator and the "compound page" accounting machinery, add a mechanism to determine the size of the mapping that encompasses a given poisoned pfn. 3/ Given pmem errors can be repaired, change the speculatively accessed poison protection, mce_unmap_kpfn(), to be reversible and otherwise allow ongoing access from the kernel. A side effect of this enabling is that MADV_HWPOISON becomes usable for dax mappings, however the primary motivation is to allow the system to survive userspace consumption of hardware-poison via dax. Specifically the current behavior is: mce: Uncorrected hardware memory error in user-access at af34214200 {1}[Hardware Error]: It has been corrected by h/w and requires no further action mce: [Hardware Error]: Machine check events logged {1}[Hardware Error]: event severity: corrected Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users [..] Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed mce: Memory error not recovered <reboot> ...and with these changes: Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000 Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption Memory failure: 0x20cb00: recovery action for dax page: Recovered Given all the cross dependencies I propose taking this through nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax folks" * tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pmem: Restore page attributes when clearing errors x86/memory_failure: Introduce {set, clear}_mce_nospec() x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses mm, memory_failure: Teach memory_failure() about dev_pagemap pages filesystem-dax: Introduce dax_lock_mapping_entry() mm, memory_failure: Collect mapping size in collect_procs() mm, madvise_inject_error: Let memory_failure() optionally take a page reference mm, dev_pagemap: Do not clear ->mapping on final put mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages filesystem-dax: Set page->index device-dax: Set page->index device-dax: Enable page_mapping() device-dax: Convert to vmf_insert_mixed and vm_fault_t
2018-08-25Merge tag 'libnvdimm-for-4.19_misc' of ↵Linus Torvalds14-24/+171
gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dave Jiang: "Collection of misc libnvdimm patches for 4.19 submission: - Adding support to read locked nvdimm capacity. - Change test code to make DSM failure code injection an override. - Add support for calculate maximum contiguous area for namespace. - Add support for queueing a short ARS when there is on going ARS for nvdimm. - Allow NULL to be passed in to ->direct_access() for kaddr and pfn params. - Improve smart injection support for nvdimm emulation testing. - Fix test code that supports for emulating controller temperature. - Fix hang on error before devm_memremap_pages() - Fix a bug that causes user memory corruption when data returned to user for ars_status. - Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax" * tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: fix ars_status output length calculation device-dax: avoid hang on error before devm_memremap_pages() tools/testing/nvdimm: improve emulation of smart injection filesystem-dax: Do not request kaddr and pfn when not required md/dm-writecache: Don't request pointer dummy_addr when not required dax/super: Do not request a pointer kaddr when not required tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access() s390, dcssblk: kaddr and pfn can be NULL to ->direct_access() libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access() acpi/nfit: queue issuing of ars when an uc error notification comes in libnvdimm: Export max available extent libnvdimm: Use max contiguous area for namespace size MAINTAINERS: Add Jan Kara for filesystem DAX MAINTAINERS: update Ross Zwisler's email address tools/testing/nvdimm: Fix support for emulating controller temperature tools/testing/nvdimm: Make DSM failure code injection an override acpi, nfit: Prefer _DSM over _LSR for namespace label reads libnvdimm: Introduce locked DIMM capacity support
2018-08-25qed: fix spelling mistake "comparsion" -> "comparison"Colin Ian King1-1/+1
Trivial fix to spelling mistake in DP_ERR error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25vhost: correctly check the iova range when waking virtqueueJason Wang1-1/+1
We don't wakeup the virtqueue if the first byte of pending iova range is the last byte of the range we just got updated. This will lead a virtqueue to wait for IOTLB updating forever. Fixing by correct the check and wake up the virtqueue in this case. Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Reported-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25qlge: Fix netdev features configuration.Manish Chopra1-15/+8
qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by: Manish <manish.chopra@cavium.com> Reviewed-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25net: macb: do not disable MDIO bus at open/close timeAnssi Hannula1-3/+6
macb_reset_hw() is called from macb_close() and indirectly from macb_open(). macb_reset_hw() zeroes the NCR register, including the MPE (Management Port Enable) bit. This will prevent accessing any other PHYs for other Ethernet MACs on the MDIO bus, which remains registered at macb_reset_hw() time, until macb_init_hw() is called from macb_open() which sets the MPE bit again. I.e. currently the MDIO bus has a short disruption at open time and is disabled at close time until the interface is opened again. Fix that by only touching the RE and TE bits when enabling and disabling RX/TX. v2: Make macb_init_hw() NCR write a single statement. Fixes: 6c36a7074436 ("macb: Use generic PHY layer") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency"Geert Uytterhoeven1-5/+5
This reverts commit bde4975310eb1982bd0bbff673989052d92fd481. All legacy clock implementations now implement clk_set_rate() (Some implementations may be dummies, though). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arnd.de> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25net: macb: Fix regression breaking non-MDIO fixed-link PHYsAhmad Fatoum1-10/+17
commit 739de9a1563a ("net: macb: Reorganize macb_mii bringup") broke initializing macb on the EVB-KSZ9477 eval board. There, of_mdiobus_register was called even for the fixed-link representing the RGMII-link to the switch with the result that the driver attempts to enumerate PHYs on a non-existent MDIO bus: libphy: MACB_mii_bus: probed mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 [snip] mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 The "MDIO" bus registration succeeds regardless, having claimed the reset GPIO, and calling of_phy_register_fixed_link later on fails because it tries to claim the same GPIO: macb f0028000.ethernet: broken fixed-link specification Fix this by registering the fixed-link before calling mdiobus_register. Fixes: 739de9a1563a ("net: macb: Reorganize macb_mii bringup") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridgeIdo Schimmel3-0/+33
When a bridge device is removed, the VLANs are flushed from each configured port. This causes the ports to decrement the reference count on the associated FIDs (filtering identifier). If the reference count of a FID is 1 and it has a RIF (router interface), then this RIF is destroyed. However, if no port is member in the VLAN for which a RIF exists, then the RIF will continue to exist after the removal of the bridge. To reproduce: # ip link add name br0 type bridge vlan_filtering 1 # ip link set dev swp1 master br0 # ip link add link br0 name br0.10 type vlan id 10 # ip address add 192.0.2.0/24 dev br0.10 # ip link del dev br0 The RIF associated with br0.10 continues to exist. Fix this by iterating over all the bridge device uppers when it is destroyed and take care of destroying their RIFs. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25Merge tag 'armsoc-late' of ↵Linus Torvalds5-18/+205
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
2018-08-25Merge tag 'for-linus-20180825' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+3
Pull block fixes from Jens Axboe: "A few small fixes for this merge window: - Locking imbalance fix for bcache (Shan Hai) - A few small fixes for wbt. One is a cleanup/prep, one is a fix for an existing issue, and the last two are fixes for changes that went into this merge window (me)" * tag 'for-linus-20180825' of git://git.kernel.dk/linux-block: blk-wbt: don't maintain inflight counts if disabled blk-wbt: fix has-sleeper queueing check blk-wbt: use wq_has_sleeper() for wq active check blk-wbt: move disable check into get_limit() bcache: release dc->writeback_lock properly in bch_writeback_thread()
2018-08-25crypto: cavium/nitrox - fix for command corruption in queue full case with ↵Srikanth Jampala3-26/+35
backlog submissions. Earlier used to post the current command without checking queue full after backlog submissions. So, post the current command only after confirming the space in queue after backlog submissions. Maintain host write index instead of reading device registers to get the next free slot to post the command. Return -ENOSPC in queue full case. Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com> Reviewed-by: Gadam Sreerama <sgadam@cavium.com> Tested-by: Jha, Chandan <Chandan.Jha@cavium.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: vmx - Fix sleep-in-atomic bugsOndrej Mosnacek2-23/+28
This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX implementations. The problem is that the blkcipher_* functions should not be called in atomic context. The bugs can be reproduced via the AF_ALG interface by trying to encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then trigger BUG in crypto_yield(): [ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424 [ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc [ 891.864739] 1 lock held by kcapi-enc/12347: [ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530 [ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1 [ 891.865251] Call Trace: [ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable) [ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310 [ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0 [ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto] [ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80 [ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530 [ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0 [ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0 [ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0 [ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70 Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module") Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: chtls - fix null dereference chtls_free_uld()Ganesh Goudar2-2/+10
call chtls_free_uld() only for the initialized cdev, this fixes NULL dereference in chtls_free_uld() Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: caam - fix DMA mapping direction for RSA forms 2 & 3Horia Geantă1-10/+10
Crypto engine needs some temporary locations in external memory for running RSA decrypt forms 2 and 3 (CRT). These are named "tmp1" and "tmp2" in the PDB. Update DMA mapping direction of tmp1 and tmp2 from TO_DEVICE to BIDIRECTIONAL, since engine needs r/w access. Cc: <stable@vger.kernel.org> # 4.13+ Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2") Fixes: 4a651b122adb ("crypto: caam - add support for RSA key form 3") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: caam/qi - fix error path in xts setkeyHoria Geantă1-4/+2
xts setkey callback returns 0 on some error paths. Fix this by returning -EINVAL. Cc: <stable@vger.kernel.org> # 4.12+ Fixes: b189817cf789 ("crypto: caam/qi - add ablkcipher and authenc algorithms") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25crypto: caam/jr - fix descriptor DMA unmappingHoria Geantă1-1/+2
Descriptor address needs to be swapped to CPU endianness before being DMA unmapped. Cc: <stable@vger.kernel.org> # 4.8+ Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness") Reported-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-25cpuidle: menu: Retain tick when shallow state is selectedRafael J. Wysocki1-1/+12
The case addressed by commit 5ef499cd571c (cpuidle: menu: Handle stopped tick more aggressively) in the stopped tick case is present when the tick has not been stopped yet too. Namely, if only two CPU idle states, shallow state A with target residency significantly below the tick boundary and deep state B with target residency significantly above it, are available and the predicted idle duration is above the tick boundary, but below the target residency of state B, state A will be selected and the CPU may spend indefinite amount of time in it, which is not quite energy-efficient. However, if the tick has not been stopped yet and the governor is about to select a shallow idle state for the CPU even though the idle duration predicted by it is above the tick boundary, it should be fine to wake up the CPU early, so the tick can be retained then and the governor will have a chance to select a deeper state when it runs next time. [Note that when this really happens, it will make the idle duration predictor believe that the CPU might be idle longer than predicted, which will make it more likely to predict longer idle durations going forward, but that will also cause deeper idle states to be selected going forward, on average, which is what's needed here.] Fixes: 87c9fe6ee495 (cpuidle: menu: Avoid selecting shallow states with stopped tick) Reported-by: Leo Yan <leo.yan@linaro.org> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+: 5ef499cd571c (cpuidle: menu: Handle ...) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds30-120/+158
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. Mostly ahci and ahci_platform changes, many around power management" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ata: ahci_platform: enable to get and control reset ata: libahci_platform: add reset control support ata: add an extra argument to ahci_platform_get_resources() ata: sata_rcar: Add r8a77965 support ata: sata_rcar: exclude setting of PHY registers in Gen3 ata: sata_rcar: really mask all interrupts on Gen2 and later Revert "ata: ahci_platform: allow disabling of hotplug to save power" ata: libahci: Allow reconfigure of DEVSLP register ata: libahci: Correct setting of DEVSLP register ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 ata: ahci: Support state with min power but Partial low power state Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" ata: sata_rcar: Add rudimentary Runtime PM support ata: sata_rcar: Provide a short-hand for &pdev->dev ata: Only output sg element mapped number in verbose debug ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG ata: ahci_platform: convert kcalloc to devm_kcalloc ata: ahci_platform: convert kzallloc to kcalloc ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown libata: remove ata_sff_data_xfer_noirq() ...
2018-08-24Merge tag 'iommu-updates-v4.19' of ↵Linus Torvalds28-232/+739
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - PASID table handling updates for the Intel VT-d driver. It implements a global PASID space now so that applications usings multiple devices will just have one PASID. - A new config option to make iommu passthroug mode the default. - New sysfs attribute for iommu groups to export the type of the default domain. - A debugfs interface (for debug only) usable by IOMMU drivers to export internals to user-space. - R-Car Gen3 SoCs support for the ipmmu-vmsa driver - The ARM-SMMU now aborts transactions from unknown devices and devices not attached to any domain. - Various cleanups and smaller fixes all over the place. * tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits) iommu/omap: Fix cache flushes on L2 table entries iommu: Remove the ->map_sg indirection iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel iommu/arm-smmu-v3: Prevent any devices access to memory without registration iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA iommu/ipmmu-vmsa: Clarify supported platforms iommu/ipmmu-vmsa: Fix allocation in atomic context iommu: Add config option to set passthrough as default iommu: Add sysfs attribyte for domain type iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register iommu/arm-smmu: Error out only if not enough context interrupts iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE iommu/io-pgtable-arm: Fix pgtable allocation in selftest iommu/vt-d: Remove the obsolete per iommu pasid tables iommu/vt-d: Apply per pci device pasid table in SVA iommu/vt-d: Allocate and free pasid table iommu/vt-d: Per PCI device pasid table interfaces iommu/vt-d: Add for_each_device_domain() helper iommu/vt-d: Move device_domain_info to header iommu/vt-d: Apply global PASID in SVA ...
2018-08-24Merge branch 'next' of ↵Linus Torvalds2-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add Daniel Lezcano as the reviewer of thermal framework and SoC driver changes (Daniel Lezcano). - Fix a bug in intel_dts_soc_thermal driver, which does not translate IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de Goede). - For device tree bindings, allow cooling devices sharing same trip point with same contribution value to share cooling map (Viresh Kumar). * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: dt-bindings: thermal: Allow multiple devices to share cooling map MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-15 02:46:46 +0000