summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-10-13lightnvm: pblk: free padded entries in write bufferJavier González2-2/+6
When a REQ_FLUSH reaches pblk, the bio cannot be directly completed. Instead, data on the write buffer is flushed and the bio is completed on the completion pah. This might require some sectors to be padded in order to guarantee a successful write. This patch fixes a memory leak on the padded pages. A consequence of this bad free was that internal bios not containing data (only a flush) were not being completed. Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: use right flag for GC allocationJavier González1-2/+5
The data buffer for the GC path allocates virtual memory through vmalloc. When this change was introduced, a flag signaling kmalloc'ed memory was wrongly introduced. Use the right flag when creating a bio from this buffer. Fixes: de54e703a422 ("lightnvm: pblk: use vmalloc for GC data buffer") Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: initialize debug stat counterJavier González1-0/+1
Initialize the stat counter for garbage collected reads. Fixes: a4bd217b43268 ("lightnvm: physical block device (pblk) target") Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: reuse pblk_gc_should_kickRakesh Pandit3-27/+9
This is a trivial change which reuses pblk_gc_should_kick instead of repeating it again in pblk_rl_free_lines_inc. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Made it apply to the common case. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: print incompatible line version correctlyRakesh Pandit3-3/+4
Correct it by converting little endian to cpu endian and also define a macro for line version so that maintenance is easy. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: improve error message if down_timeout failsRakesh Pandit1-10/+2
The two pr_err messages are useless as they don't differentiate error code. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: fix message if L2P MAP is in deviceRakesh Pandit1-1/+1
This usually happens if we are developing with qemu and ll2pmode has default value. Improve description. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: protect line bitmap while submitting meta ioRakesh Pandit1-0/+2
It seems pblk_dealloc_page would race against pblk_alloc_pages for line bitmap for sector allocation.The chances are very low but might as well protect the bitmap properly. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: include NVM Express driver if OCSSD is selected for buildRakesh Pandit1-1/+2
Because NVM needs BLK_DEV_NVME, select it automatically if we mark NVM in config file before building kernel. Also append PCI to depends as select doesn't automatically add dependencies. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: pblk: fix error path in pblk_lines_alloc_metadataRakesh Pandit1-1/+4
Use appropriate memory free calls based on allocation type used and also fix number of times free is called if kmalloc fails. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: remove already calculated nr_chnlsRakesh Pandit1-1/+0
Remove repeated calculation for number of channels while creating a target device. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: protect target type list with correct locksRakesh Pandit1-4/+4
nvm_tgt_types list was protected by wrong lock for NVM_INFO ioctl call and can race with addition or removal of target types. Also unregistering target type was not protected correctly. Fixes: 5cd907853 ("lightnvm: remove nested lock conflict with mm") Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: prevent bd removal if busyRakesh Pandit1-0/+14
When a virtual block device is formatted and mounted after creating with "nvme lnvm create... -t pblk", a removal from "nvm lnvm remove" would result in this: 446416.309757] bdi-block not registered [446416.309773] ------------[ cut here ]------------ [446416.309780] WARNING: CPU: 3 PID: 4319 at fs/fs-writeback.c:2159 __mark_inode_dirty+0x268/0x340 Ideally removal should return -EBUSY as block device is mounted after formatting. This patch tries to address this checking if whole device or any partition of it already mounted or not before removal. Whole device is checked using "bd_super" member of block device. This member is always set once block device has been mounted using a filesystem. Another member "bd_part_count" takes care of checking any if any partitions are under use. "bd_part_count" is only updated under locks when partitions are opened or closed (first open and last release). This at least does take care sending -EBUSY if removal is being attempted while whole block device or any partition is mounted. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13lightnvm: prevent target type module removal when in useRakesh Pandit2-0/+5
If target type module e.g. pblk here is unloaded (rmmod) while module is in use (after creating target) system crashes. We fix this by using module API refcnt. Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-12mtip32xx: Clean up unused variablesChristos Gkekas1-7/+0
Remove variables that are set but never used. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-05block: remove QUEUE_FLAG_STACKABLEChristoph Hellwig3-26/+2
We already have a queue_is_rq_based helper to check if a request_queue is request based, so we can remove the flag for it. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-03buffer: have alloc_page_buffers() use __GFP_NOFAILJens Axboe1-1/+1
Instead of adding weird retry logic in that function, utilize __GFP_NOFAIL to ensure that the vm takes care of handling any potential retries appropriately. This means we don't have to call free_more_memory() from here. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-30null_blk: add "no_sched" module parameterweiping zhang1-0/+6
add an option that disable io scheduler for null block device. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-26block: fix a build errorShaohua Li1-1/+1
The code is only for blkcg not for all cgroups Fixes: d4478e92d618 ("block/loop: make loop cgroup aware") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-26block: cryptoloop - Fix build warningCorentin Labbe1-2/+0
This patch fix the following build warning: drivers/block/cryptoloop.c:46:8: warning: variable 'cipher' set but not used [-Wunused-but-set-variable] Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-26block/loop: make loop cgroup awareShaohua Li2-0/+14
loop block device handles IO in a separate thread. The actual IO dispatched isn't cloned from the IO loop device received, so the dispatched IO loses the cgroup context. I'm ignoring buffer IO case now, which is quite complicated. Making the loop thread aware cgroup context doesn't really help. The loop device only writes to a single file. In current writeback cgroup implementation, the file can only belong to one cgroup. For direct IO case, we could workaround the issue in theory. For example, say we assign cgroup1 5M/s BW for loop device and cgroup2 10M/s. We can create a special cgroup for loop thread and assign at least 15M/s for the underlayer disk. In this way, we correctly throttle the two cgroups. But this is tricky to setup. This patch tries to address the issue. We record bio's css in loop command. When loop thread is handling the command, we then use the API provided in patch 1 to set the css for current task. The bio layer will use the css for new IO (from patch 3). Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds15-128/+128
Pull block fixes from Jens Axboe: - Two sets of NVMe pull requests from Christoph: - Fixes for the Fibre Channel host/target to fix spec compliance - Allow a zero keep alive timeout - Make the debug printk for broken SGLs work better - Fix queue zeroing during initialization - Set of RDMA and FC fixes - Target div-by-zero fix - bsg double-free fix. - ndb unknown ioctl fix from Josef. - Buffered vs O_DIRECT page cache inconsistency fix. Has been floating around for a long time, well reviewed. From Lukas. - brd overflow fix from Mikulas. - Fix for a loop regression in this merge window, where using a union for two members of the loop_cmd turned out to be a really bad idea. From Omar. - Fix for an iostat regression fix in this series, using the wrong API to get at the block queue. From Shaohua. - Fix for a potential blktrace delection deadlock. From Waiman. * 'for-linus' of git://git.kernel.dk/linux-block: (30 commits) nvme-fcloop: fix port deletes and callbacks nvmet-fc: sync header templates with comments nvmet-fc: ensure target queue id within range. nvmet-fc: on port remove call put outside lock nvme-rdma: don't fully stop the controller in error recovery nvme-rdma: give up reconnect if state change fails nvme-core: Use nvme_wq to queue async events and fw activation nvme: fix sqhd reference when admin queue connect fails block: fix a crash caused by wrong API fs: Fix page cache inconsistency when mixing buffered and AIO DIO nvmet: implement valid sqhd values in completions nvme-fabrics: Allow 0 as KATO value nvme: allow timed-out ios to retry nvme: stop aer posting if controller state not live nvme-pci: Print invalid SGL only once nvme-pci: initialize queue memory before interrupts nvmet-fc: fix failing max io queue connections nvme-fc: use transport-specific sgl format nvme: add transport SGL definitions nvme.h: remove FC transport-specific error values ...
2017-09-25nvme-fcloop: fix port deletes and callbacksJames Smart1-64/+38
Now that there are potentially long delays between when a remoteport or targetport delete calls is made and when the callback occurs (dev_loss_tmo timeout), no longer block in the delete routines and move the final nport puts to the callbacks. Moved the fcloop_nport_get/put/free routines to avoid forward declarations. Ensure port_info structs used in registrations are nulled in case fields are not set (ex: devloss_tmo values). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: ensure target queue id within range.James Smart1-0/+3
When searching for queue id's ensure they are within the expected range. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: on port remove call put outside lockJames Smart1-1/+5
Avoid calling the put routine, as it may traverse to free routines while holding the target lock. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-rdma: don't fully stop the controller in error recoverySagi Grimberg1-1/+1
By calling nvme_stop_ctrl on a already failed controller will wait for the scan work to complete (only by identify timeout expiration which is 60 seconds). This is unnecessary when we already know that the controller has failed. Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-rdma: give up reconnect if state change failsSagi Grimberg1-1/+6
If we failed to transition to state LIVE after a successful reconnect, then controller deletion already started. In this case there is no point moving forward with reconnect. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-core: Use nvme_wq to queue async events and fw activationSagi Grimberg1-2/+2
async_event_work might race as it is executed from two different workqueues at the moment. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: fix sqhd reference when admin queue connect failsJames Smart1-1/+2
Fix bug in sqhd patch. It wasn't the sq that was at risk. In the case where the admin queue connect command fails, the sq->size field is not set. Therefore, this becomes a divide by zero error. Add a quick check to bypass under this failure condition. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet: implement valid sqhd values in completionsJames Smart3-6/+12
To support sqhd, for initiators that are following the spec and paying attention to sqhd vs their sqtail values: - add sqhd to struct nvmet_sq - initialize sqhd to 0 in nvmet_sq_setup - rather than propagate the 0's-based qsize value from the connect message which requires a +1 in every sqhd update, and as nothing else references it, convert to 1's-based value in nvmt_sq/cq_setup() calls. - validate connect message sqsize being non-zero per spec. - updated assign sqhd for every completion that goes back. Also remove handling the NULL sq case in __nvmet_req_complete, as it can't happen with the current code. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fabrics: Allow 0 as KATO valueGuilherme G. Piccoli1-9/+9
Currently, driver code allows user to set 0 as KATO (Keep Alive TimeOut), but this is not being respected. This patch enforces the expected behavior. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: allow timed-out ios to retryJames Smart1-2/+0
Currently the nvme_req_needs_retry() applies several checks to see if a retry is allowed. On of those is whether the current time has exceeded the start time of the io plus the timeout length. This check, if an io times out, means there is never a retry allowed for the io. Which means applications see the io failure. Remove this check and allow the io to timeout, like it does on other protocols, and retries to be made. On the FC transport, a frame can be lost for an individual io, and there may be no other errors that escalate for the connection/association. The io will timeout, which causes the transport to escalate into creating a new association, but the io that timed out, due to this retry logic, has already failed back to the application and things are hosed. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: stop aer posting if controller state not liveJames Smart1-2/+3
If an nvme async_event command completes, in most cases, a new async event is posted. However, if the controller enters a resetting or reconnecting state, there is nothing to block the scheduled work element from posting the async event again. Nor are there calls from the transport to stop async events when an association dies. In the case of FC, where the association is torn down, the aer must be aborted on the FC link and completes through the normal job completion path. Thus the terminated async event ends up being rescheduled even though the controller isn't in a valid state for the aer, and the reposting gets the transport into a partially torn down data structure. It's possible to hit the scenario on rdma, although much less likely due to an aer completing right as the association is terminated and as the association teardown reclaims the blk requests via nvme_cancel_request() so its immediate, not a link-related action like on FC. Fix by putting controller state checks in both the async event completion routine where it schedules the async event and in the async event work routine before it calls into the transport. It's effectively a "stop_async_events()" behavior. The transport, when it creates a new association with the subsystem will transition the state back to live and is already restarting the async event posting. Signed-off-by: James Smart <james.smart@broadcom.com> [hch: remove taking a lock over reading the controller state] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-pci: Print invalid SGL only onceKeith Busch1-12/+18
The WARN_ONCE macro returns true if the condition is true, not if the warn was raised, so we're printing the scatter list every time it's invalid. This is excessive and makes debugging harder, so this patch prints it just once. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-pci: initialize queue memory before interruptsKeith Busch1-2/+2
A spurious interrupt before the nvme driver has initialized the completion queue may inadvertently cause the driver to believe it has a completion to process. This may result in a NULL dereference since the nvmeq's tags are not set at this point. The patch initializes the host's CQ memory so that a spurious interrupt isn't mistaken for a real completion. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: fix failing max io queue connectionsJames Smart1-3/+3
fc transport is treating NVMET_NR_QUEUES as maximum queue count, e.g. admin queue plus NVMET_NR_QUEUES-1 io queues. But NVMET_NR_QUEUES is the number of io queues, so maximum queue count is really NVMET_NR_QUEUES+1. Fix the handling in the target fc transport Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fc: use transport-specific sgl formatJames Smart1-6/+7
Sync with NVM Express spec change and FC-NVME 1.18. FC transport sets SGL type to Transport SGL Data Block Descriptor and subtype to transport-specific value 0x0A. Removed the warn-on's on the PRP fields. They are unneeded. They were to check for values from the upper layer that weren't set right, and for the most part were fine. But, with Async events, which reuse the same structure and 2nd time issued the SGL overlay converted them to the Transport SGL values - the warn-on's were errantly firing. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25qla2xxx: remove use of FC-specific error codesJames Smart1-1/+1
The qla2xxx driver uses the FC-specific error when it needed to return an error to the FC-NVME transport. Convert to use a generic value instead. Signed-off-by: James Smart <james.smart@broadcom.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25lpfc: remove use of FC-specific error codesJames Smart1-1/+1
The lpfc driver uses the FC-specific error when it needed to return an error to the FC-NVME transport. Convert to use a generic value instead. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fcloop: remove use of FC-specific error codesJames Smart1-1/+1
The FC-NVME transport loopback test module used the FC-specific error codes in cases where it emulated a transport abort case. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: remove use of FC-specific error codesJames Smart1-6/+3
The FC-NVME target transport used the FC-specific error codes in return codes when the transport or lldd failed. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fc: remove use of FC-specific error codesJames Smart1-4/+4
The FC-NVME transport used the FC-specific error codes in cases where it had to fabricate an error to go back up stack. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25loop: remove union of use_aio and ref in struct loop_cmdOmar Sandoval1-4/+2
When the request is completed, lo_complete_rq() checks cmd->use_aio. However, if this is in fact an aio request, cmd->use_aio will have already been reused as cmd->ref by lo_rw_aio*. Fix it by not using a union. On x86_64, there's a hole after the union anyways, so this doesn't make struct loop_cmd any bigger. Fixes: 92d773324b7e ("block/loop: fix use after free") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nbd: ignore non-nbd ioctl'sJosef Bacik1-0/+6
In testing we noticed that nbd would spew if you ran a fio job against the raw device itself. This is because fio calls a block device specific ioctl, however the block layer will first pass this back to the driver ioctl handler in case the driver wants to do something special. Since the device was setup using netlink this caused us to spew every time fio called this ioctl. Since we don't have special handling, just error out for any non-nbd specific ioctl's that come in. This fixes the spew. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25brd: fix overflow in __brd_direct_accessMikulas Patocka1-1/+1
The code in __brd_direct_access multiplies the pgoff variable by page size and divides it by 512. It can cause overflow on 32-bit architectures. The overflow happens if we create ramdisk larger than 4G and use it as a sparse device. This patch replaces multiplication and division with multiplication by the number of sectors per page. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 1647b9b959c7 ("brd: add dax_operations support") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A clocksource driver section mismatch fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/integrator: Fix section mismatch warning
2017-09-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes, and an affinity mask helper function bug fix affecting x86" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "genirq: Restrict effective affinity to interrupts actually using it" irqchip.mips-gic: Fix shared interrupt mask writes irqchip/gic-v4: Fix building with ancient gcc irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
2017-09-24Merge branch 'next-tpm' of ↵Linus Torvalds7-52/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id
2017-09-23tpm: ibmvtpm: simplify crq initialization and document crq formatMichal Suchanek1-36/+60
The crq is passed in registers and is the same on BE and LE hosts. However, current implementation allocates a structure on-stack to represent the crq, initializes the members swapping them to BE, and loads the structure swapping it from BE. This is pointless and causes GCC warnings about ununitialized members. Get rid of the structure and the warnings. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic driversHamza Attak5-14/+21
The patch simply replaces all msleep function calls with usleep_range calls in the generic drivers. Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a thousand PCR extends, we see results going from 1m57s unpatched to 40s with the new patch. We obtain similar results when using the original and patched tpm_infineon driver, which is also part of the patch. Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per extend unpatched and around 7ms with the new patch. Note that the PCR consistency is untouched with this patch, each TPM has been tested with 10 million extends and the aggregated PCR value is continuously verified to be correct. As an extension of this work, this could potentially and easily be applied to other vendor's drivers. Still, these changes are not included in the proposed patch as they are untested. Signed-off-by: Hamza Attak <hamza@hpe.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-21 06:43:05 +0000