summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-06-26dlci: acquire rtnl_lock before calling __dev_get_by_name()Zefan Li1-5/+9
Otherwise the net device returned can be freed at anytime. Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25net/tg3: Avoid delay during MMIO accessGavin Shan1-0/+36
When the EEH error is the result of a fenced host bridge, MMIO accesses can be very slow (milliseconds) to timeout and return all 1's, thus causing the driver various timeout loops to take way too long and trigger soft-lockup warnings (in addition to taking minutes to recover). It might be worthwhile to check if for any of these cases, ffffffff is a valid possible value, and if not, bail early since that means the HW is either gone or isolated. In the meantime, checking that the PCI channel is offline would be workaround of the problem. Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25macvtap: fix recovery from gup errorsMichael S. Tsirkin1-2/+4
get user pages might fail partially in macvtap zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25tun: fix recovery from gup errorsMichael S. Tsirkin1-2/+4
get user pages might fail partially in tun zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25Merge branch 'master' of ↵John W. Linville2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-24ath9k_htc: Handle IDLE state transition properlySujith Manoharan1-1/+1
Make sure that a chip reset is done when IDLE is turned off - this fixes authentication timeouts. Cc: stable@vger.kernel.org Reported-by: Ignacy Gawedzki <i@lri.fr> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: fix an RCU issue in calling ieee80211_get_tx_ratesFelix Fietkau1-1/+5
ath_txq_schedule is called outside of the drv_tx call, so it needs RCU protection. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24qlcnic: Do not sleep while holding spinlockShahed Shaikh1-1/+1
This patch reverts commit a4791254b6625b06aa33e36304f6e8a1a4a1fdea ("qlcnic: change mdelay to msleep") which overwrote a commit 68b3f28c11bf896be32ad2a2e151aaa5f4a7c98e ("qlcnic: Fix scheduling while atomic bug") Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24drivers: net: cpsw: fix compilation error with cpsw driverMugunthan V N1-0/+1
drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_suspend': drivers/net/ethernet/ti/cpsw.c:1979:26: error: 'priv' undeclared (first use in this function) drivers/net/ethernet/ti/cpsw.c:1979:26: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/net/ethernet/ti/cpsw.o] Error 1 The compilation error was introduced by the following commit 6d3d76f (drivers: net: cpsw: fix cpsw clock gating issue across suspend/resume) Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix misreporting of transmit abortSergei Shtylyov1-2/+3
Due to obviously missing braces, EESR.TABT (transmit abort) interrupt may be reported even if it hasn't happened, just when EESR.TWB (transmit descriptor write-back) interrupt happens. Luckily (?), EESR.TWB is disabled by the driver via the TRIMD register and all the interrupt masks, so that transmit abort is never actually logged... Put the braces where they should be and fix the incoherent comment, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix unhandled RFE interruptSergei Shtylyov2-16/+19
EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs and sh_eth_error() handles it but it's not present in any initializer/assignment of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that interrupt not being handled and cleared, and finally to disabling IRQ and the driver being non-functional. Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the initializers, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24qmi_wwan: add various Novatel Gobi1K IDsDan Williams1-1/+7
Found in the Windows INF files while investigating the Novatel/Verizon USB-1000 device. The USB-1000 is verified as a Gobi1K device and works with QMI after loading appropriate firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: eth: davicnci_cpdma: check dma map errorSebastian Siewior1-0/+7
Since the DMA mapping may fail the caller should check the return value. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24bonding: fix slave speed reporting in bond_miimon_commitNikolay Aleksandrov1-1/+2
When we have BOND_LINK_UP the speed is reported unconditionally with %u format although it can be SPEED_UNKNOWN (-1). After this patch it returns 0 in that case in an attempt to keep the existing scripts happy. One line is intenionally left 81 chars because it gets ugly if broken. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net/mlx_en: Timestamping is not supported in slave modeAmir Vadai1-0/+3
Old hypervisors don't mask out timestamp capability for slave. Till slave support will be added, need to disable capability by slave. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19mv643xx_eth: Allocate receive queue initialized to zeroLubomir Rintel1-1/+1
Zero pointer in rx_skb is how respective rxq_deinit() finds out out that a skb slot is unallocated. If rxq_refill() fails (e.g. on OOM condition), subsequent teardown would result in an attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19pxa168_eth: Allocate receive queue initialized to zeroLubomir Rintel1-2/+2
Zero pointer in rx_skb or tx_skb is how respective *_deinit() functions find out that a skb slot is unallocated. If *_init() functions unsuccessfully return after the allocation (e.g. when subsequent dma_alloc_coherent() is not successful), this would result in attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Kosta Zertsekel <konszert@marvell.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sfc: Remove write permission from phy_type attributeBen Hutchings1-1/+1
Driver probe currently results in: WARNING: at drivers/base/core.c:576 device_create_file+0x57/0x7e() Attribute phy_type: write permission without 'store' Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Fix structure layout for little-endian.David Daney1-7/+15
The C ABI reverses the bitfield fill order when compiled as little-endian. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Correct tx IFG workaround.David Daney1-3/+6
The previous fix was still too agressive to meet ieee specs. Increase to (14, 10). Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19stmmac: fix EEE setupGiuseppe CAVALLARO2-37/+33
This patch fixes the EEE setup allowing to configure this support when the link changes. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19drivers: net: cpsw: fix cpsw clock gating issue across suspend/resumeMugunthan V N1-0/+2
Due to some hardware integration issue, CPSW sliver modules requires a reset across suspend/resume cycle for a successful clock gating to CPGMAC (CPSW and Davinci MDIO) in AM335x PG1.0. This issue is fixed in PG2.x, though to support suspend/resume on PG1.0 this reset is required. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: fec: Fix build for MCF5272Guenter Roeck1-0/+14
Commits 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration) and baa70a5c (net: fec: enable pause frame to improve rx prefomance for 1G network) introduced functionality into the FEC driver which is not supported on MCF5272. The registers used to implement this functionality do not exist on MCF5272. Since register defines for MCF5272 are separate from register defines for other chips, building images for MCF5272 fails as follows. fec_main.c: In function 'fec_restart': fec_main.c:520:8: error: 'FEC_RACC' undeclared (first use in this function) fec_main.c:585:3: error: 'FEC_R_FIFO_RSEM' undeclared (first use in this function) fec_main.c:586:3: error: 'FEC_R_FIFO_RSFL' undeclared (first use in this function) fec_main.c:587:3: error: 'FEC_R_FIFO_RAEM' undeclared (first use in this function) fec_main.c:588:3: error: 'FEC_R_FIFO_RAFL' undeclared (first use in this function) fec_main.c:591:3: error: 'FEC_OPD' undeclared (first use in this function) Adding the missing register defines is not an option, since the registers do not exist on MCF5272. Disable the added functionality for MCF5272 builds. Cc: Frank Li <Frank.Li@freescale.com> Cc: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19vxlan: fix check for migration of static entrystephen hemminger1-1/+1
The check introduced by: commit 26a41ae604381c5cc0caf1c3261ca6b298b5fe69 Author: stephen hemminger <stephen@networkplumber.org> Date: Mon Jun 17 12:09:58 2013 -0700 vxlan: only migrate dynamic FDB entries was not correct because it is checking flag about type of FDB entry, rather than the state (dynamic versus static). The confusion arises because vxlan is reusing values from bridge, and bridge is reusing values from neighbour table, and easy to get lost in translation. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19can: usb_8dev: unregister netdev before free()ingMarc Kleine-Budde1-1/+4
The usb_8dev hardware has problems on some xhci USB hosts. The driver fails to read the firmware revision in the probe function. This leads to the following Oops: [ 3356.635912] kernel BUG at net/core/dev.c:5701! The driver tries to free the netdev, which has already been registered, without unregistering it. This patch fixes the problem by unregistering the netdev in the error path. Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Bernd Krumboeck <krumboeck@universalnet.at> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-17net: cpsw: check for cpts pointer after its allocationSebastian Siewior1-1/+1
after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'for-davem' of ↵David S. Miller11-35/+37
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into wireless John W. Linville says: ==================== This will probably be the last batch of wireless fixes intended for 3.10. Many of these are one- or two-liners, and a couple of others are mostly relocating existing code to avoid races or to limit the code to effecting specific hardware, etc. The mac80211 fixes have a couple of exceptions to the above. Regarding those, Johannes says: "Following davem's complaint about my patch, here's a new pull request w/o the patch he was complaining about, but instead with the const fix rolled into the fix. I have a fix for radar detection, one for rate control and a workaround for broken HT APs which is a regression fix because we didn't rely on them to be correct before." Johannes also sends some iwlwifi fixes: "I picked up Nikolay's patch for the chain noise calibration bug that seems to have been there forever, a fix from Emmanuel for setting TX flags on BAR frames and a fix of my own to avoid printing request_module() errors if the kernel isn't even modular. We also have our own version of Stanislaw's fix for rate control." Along with those... Anderson Lizardo fixes a Bluetooth memory corruption bug when an MTU value is set to too small of a value. Arend van Spriel sends a revised brcmsmac bug that fixes a regression caused by a bad return value in an earlier patch. He also sends a brcmfmac fix to avoid an oops when loading the driver at boot. Daniel Drake fixes a race condition in btmrvl that causes hangs on suspend for OLPC hardware. Johan Hedberg adds a check to avoid sending a HCI_Delete_Stored_Link_Key command to devices that don't support them, avoiding some scary looking log spam. Stanislaw Gruszka gives us a fix for iwlegacy to be able to use rates higher than 1Mb/s on older wireless networks. He also sends an rt2x00 fix to reinstate older tx power handling behavior for some devices that didn't work well with the current code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17alx: add a simple AR816x/AR817x device driverJohannes Berg9-0/+4568
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Fix the VLAN_TAG_PRESENT in netvsc_recv_callback()Haiyang Zhang1-1/+3
We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: handle skb_clone failurestephen hemminger1-3/+5
If skb_clone fails if out of memory then just skip the fanout. Problem was introduced in 3.10 with: commit 6681712d67eef14c4ce793561c3231659153a320 Author: David Stevens <dlstevens@us.ibm.com> Date: Fri Mar 15 04:35:51 2013 +0000 vxlan: generalize forwarding tables Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: only migrate dynamic FDB entriesstephen hemminger1-4/+12
Only migrate dynamic forwarding table entries, don't modify static entries. If packet received from incorrect source IP address assume it is an imposter and drop it. This patch applies only to -net, a different patch would be needed for earlier kernels since the NTF_SELF flag was introduced with 3.10. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: fix race between flush and incoming learningstephen hemminger1-7/+9
It is possible for a packet to arrive during vxlan_stop(), and have a dynamic entry created. Close this by checking if device is up. CPU1 CPU2 vxlan_stop vxlan_flush hash_lock acquired vxlan_encap_recv vxlan_snoop waiting for hash_lock hash_lock relased vxlan_flush done hash_lock acquired vxlan_fdb_create This is a day-one bug in vxlan goes back to 3.7. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'master' of ↵John W. Linville11-35/+37
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-16lseek(fd, n, SEEK_END) does *not* go to eof - nAl Viro4-4/+4
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds11-29/+74
Pull networking fixes from David Miller: 1) Fix RTNL locking in batman-adv, from Matthias Schiffer. 2) Don't allow non-passthrough macvlan devices to set NOPROMISC via netlink, otherwise we can end up with corrupted promisc counter values on the device. From Michael S Tsirkin. 3) Fix stmmac driver build with debugging defines enabled, from Dinh Nguyen. 4) Make sure name string we give in socket address in AF_PACKET is NULL terminated, from Daniel Borkmann. 5) Fix leaking of two uninitialized bytes of memory to userspace in l2tp, from Guillaume Nault. 6) Clear IPCB(skb) before tunneling otherwise we touch dangling IP options state and crash. From Saurabh Mohan. 7) Fix suspend/resume for davinci_mdio by using suspend_late and resume_early. From Mugunthan V N. 8) Don't tag ip_tunnel_init_net and ip_tunnel_delete_net with __net_{init,exit}, they can be called outside of those contexts. From Eric Dumazet. 9) Fix RX length error in sh_eth driver, from Yoshihiro Shimoda. 10) Fix missing sctp_outq initialization in some code paths of SCTP stack, from Neil Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. tulip: Properly check dma mapping result net: sh_eth: fix incorrect RX length error if R8A7740 ip_tunnel: remove __net_init/exit from exported functions drivers: net: davinci_mdio: restore mdio clk divider in mdio resume drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driver net/ipv4: ip_vti clear skb cb before tunneling. tg3: Wait for boot code to finish after power on l2tp: Fix sendmsg() return value l2tp: Fix PPP header erasure and memory leak bonding: fix igmp_retrans type and two related races bonding: reset master mac on first enslave failure packet: packet_getname_spkt: make sure string is always 0-terminated net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG used be2net: Fix 32-bit DMA Mask handling xen-netback: don't de-reference vif pointer after having called xenvif_put() macvlan: don't touch promisc without passthrough batman-adv: Don't handle address updates when bla is disabled batman-adv: forward late OGMs from best next hop ...
2013-06-14Merge tag 'char-misc-3.10-rc5' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc fixes from Greg Kroah-Hartman: "Here are some small mei driver fixes for 3.10-rc6 that fix some reported problems" * tag 'char-misc-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device
2013-06-14Merge tag 'usb-3.10-rc5' of ↵Linus Torvalds5-21/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB driver fixes that resolve some reported problems for 3.10-rc6 Nothing major, just 3 USB serial driver fixes, and two chipidea fixes" * tag 'usb-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: fix id change handling usb: chipidea: fix no transceiver case USB: pl2303: fix device initialisation at open USB: spcp8x5: fix device initialisation at open USB: f81232: fix device initialisation at open
2013-06-13mei: me: clear interrupts on the resume pathTomas Winkler1-0/+1
We need to clear pending interrupts on the resume path. This brings the device into defined state before starting the reset flow This should solve suspend/resume issues: mei_me : wait hw ready failed. status = 0x0 mei_me : version message write failed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: nfc: fix nfc device freeingTomas Winkler1-0/+2
The nfc_dev is a static variable and is not cleaned properly upon reset mainly ndev->cl and ndev->cl_info are not set to NULL after freeing which mei_stop:198: mei_me 0000:00:16.0: stopping the device. [ 404.253427] general protection fault: 0000 [#2] SMP [ 404.253437] Modules linked in: mei_me(-) binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop dm_mod hid_generic usbhid hid coretemp acpi_cpufreq mperf kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul snd_hda_codec_hdmi glue_helper aes_x86_64 e1000e snd_hda_intel snd_hda_codec ehci_pci iTCO_wdt iTCO_vendor_support ehci_hcd snd_hwdep xhci_hcd snd_pcm usbcore ptp mei sg microcode snd_timer pps_core i2c_i801 snd pcspkr battery rtc_cmos lpc_ich mfd_core soundcore usb_common snd_page_alloc ac ext3 jbd mbcache drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt i2c_core sd_mod crc_t10dif thermal fan video button processor thermal_sys hwmon ahci libahci libata scsi_mod [last unloaded: mei_me] [ 404.253591] CPU: 0 PID: 5551 Comm: modprobe Tainted: G D W 3.10.0-rc3 #1 [ 404.253611] task: ffff880143cd8300 ti: ffff880144a2a000 task.ti: ffff880144a2a000 [ 404.253619] RIP: 0010:[<ffffffff81334e5d>] [<ffffffff81334e5d>] device_del+0x1d/0x1d0 [ 404.253638] RSP: 0018:ffff880144a2bcf8 EFLAGS: 00010206 [ 404.253645] RAX: 2020302e30202030 RBX: ffff880144fdb000 RCX: 0000000000000086 [ 404.253652] RDX: 0000000000000001 RSI: 0000000000000086 RDI: ffff880144fdb000 [ 404.253659] RBP: ffff880144a2bd18 R08: 0000000000000651 R09: 0000000000000006 [ 404.253666] R10: 0000000000000651 R11: 0000000000000006 R12: ffff880144fdb000 [ 404.253673] R13: ffff880149371098 R14: ffff880144482c00 R15: ffffffffa04710e0 [ 404.253681] FS: 00007f251c59a700(0000) GS:ffff88014e200000(0000) knlGS:0000000000000000 [ 404.253689] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 404.253696] CR2: ffffffffff600400 CR3: 0000000145319000 CR4: 00000000001407f0 [ 404.253703] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 404.253710] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 404.253716] Stack: [ 404.253720] ffff880144fdb000 ffff880143ffe000 ffff880149371098 ffffffffa0471000 [ 404.253732] ffff880144a2bd38 ffffffff8133502d ffff88014e20cf48 ffff880143ffe1d8 [ 404.253744] ffff880144a2bd48 ffffffffa02a4749 ffff880144a2bd58 ffffffffa02a4ba1 [ 404.253755] Call Trace: [ 404.253766] [<ffffffff8133502d>] device_unregister+0x1d/0x60 [ 404.253787] [<ffffffffa02a4749>] mei_cl_remove_device+0x9/0x10 [mei] [ 404.253804] [<ffffffffa02a4ba1>] mei_nfc_host_exit+0x21/0x30 [mei] [ 404.253819] [<ffffffffa029c2dd>] mei_stop+0x3d/0x90 [mei] [ 404.253830] [<ffffffffa046e220>] mei_me_remove+0x60/0xe0 [mei_me] [ 404.253843] [<ffffffff81278f37>] pci_device_remove+0x37/0xb0 [ 404.253855] [<ffffffff81337c68>] __device_release_driver+0x98/0x100 [ 404.253865] [<ffffffff81337d80>] driver_detach+0xb0/0xc0 [ 404.253876] [<ffffffff81336b4f>] bus_remove_driver+0x8f/0x120 [ 404.253891] [<ffffffff81075990>] ? try_to_wake_up+0x2b0/0x2b0 [ 404.253903] [<ffffffff81338a48>] driver_unregister+0x58/0x90 [ 404.253913] [<ffffffff8127906b>] pci_unregister_driver+0x2b/0xb0 [ 404.253924] [<ffffffffa046f244>] mei_me_driver_exit+0x10/0xdcc [mei_me] [ 404.253936] [<ffffffff810a50d8>] SyS_delete_module+0x198/0x2b0 [ 404.253949] [<ffffffff814850d9>] ? do_page_fault+0x9/0x10 [ 404.253961] [<ffffffff81489692>] system_call_fastpath+0x16/0x1b [ 404.253967] Code: 41 5c 41 5d 41 5e 41 5f c9 c3 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc 53 48 8b 87 88 00 00 00 4c 8b 37 48 85 c0 74 18 <48> 8b 78 78 4c 89 e2 be 02 00 00 00 48 81 c7 f8 00 00 00 e8 3b [ 404.254048] RIP [<ffffffff81334e5d>] device_del+0x1d/0x1d0 Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13mei: init: Flush scheduled work before resetting the deviceSamuel Ortiz1-2/+2
Flushing pending work items before resetting the device makes more sense than doing so afterwards. Some of them, like e.g. the NFC initialization one, find themselves with client IDs changed after the reset, eventually leading to trigger a client.c:mei_me_cl_by_id() warning after a few modprobe/rmmod cycles. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13netiucv: Hold rtnl between name allocation and device registration.Benjamin Poirier1-1/+5
fixes a race condition between concurrent initializations of netiucv devices that try to use the same name. sysfs: cannot create duplicate filename '/devices/iucv/netiucv2' [...] Call Trace: ([<00000000002edea4>] sysfs_add_one+0xb0/0xdc) [<00000000002eecd4>] create_dir+0x80/0xfc [<00000000002eee38>] sysfs_create_dir+0xe8/0x118 [<00000000003835a8>] kobject_add_internal+0x120/0x2d0 [<00000000003839d6>] kobject_add+0x62/0x9c [<00000000003d9564>] device_add+0xcc/0x510 [<000003e00212c7b4>] netiucv_register_device+0xc0/0x1ec [netiucv] Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13tulip: Properly check dma mapping resultNeil Horman1-0/+6
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-6/+9
Pull device tree bug fixes from Grant Likely: "This branch contains the following bug fixes: - Fix locking vs. interrupts. Bug caught by lockdep checks - Fix parsing of cpp #line directive output by dtc - Fix 'make clean' for dtc temporary files. There is also a commit that regenerates the dtc lexer and parser files with Bison 2.5. The only purpose of this commit is to separate the functional change in the dtc bug fix from the code generation change caused by a different Bison version" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: dtc: ensure #line directives don't consume data from the next line dtc: Update generated files to output from Bison 2.5 of: Fix locking vs. interrupts kbuild: make sure we clean up DTB temporary files
2013-06-13of: Fix locking vs. interruptsBenjamin Herrenschmidt1-6/+9
The OF code uses irqsafe locks everywhere except in a handful of functions for no obvious reasons. Since the conversion from the old rwlocks, this now triggers lockdep warnings when used at interrupt time. At least one driver (ibmvscsi) seems to be doing that from softirq context. This converts the few non-irqsafe locks into irqsafe ones, making them consistent with the rest of the code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-13Merge tag 'acpi-3.10-rc6' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This is an alternative fix for the regression introduced in 3.9 whose previous fix had to be reverted right before 3.10-rc5, because it broke one of the Tony's machines. In this one the check is confined to the ACPI video driver (which is the only one causing the problem to happen in the first place) and the Tony's box shouldn't even notice it. - ACPI fix for an issue causing ACPI video driver to attempt to bind to devices it shouldn't touch from Rafael J Wysocki." * tag 'acpi-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Do not bind to device objects with a scan handler
2013-06-13brcmfmac: free primary net_device when brcmf_bus_start() failsArend van Spriel1-0/+4
When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13Merge tag 'md-3.10-fixes' of git://neil.brown.name/mdLinus Torvalds4-26/+47
Pull md bugfixes from Neil Brown: "A few bugfixes for md Some tagged for -stable" * tag 'md-3.10-fixes' of git://neil.brown.name/md: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place md/raid1,raid10: use freeze_array in place of raise_barrier in various places. md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. md: md_stop_writes() should always freeze recovery.
2013-06-13Bluetooth: btmrvl: fix thread stopping raceDaniel Drake1-5/+4
There is currently a race condition in the btmrvl_remove_card() which is causing hangs on suspend for OLPC. When the race occurs, kthread_stop() never returns. The problem is that btmrvl_service_main_thread() calls kthread_should_stop() and then does a fair number of things before restarting the loop and sleeping. If the thread gets stopped after kthread_should_stop() is checked, but before the sleep happens, the thread will go to sleep and won't necessarily be woken up. Move the kthread_should_stop() check into a race-free place. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13net: sh_eth: fix incorrect RX length error if R8A7740Yoshihiro Shimoda1-4/+11
This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740. This patch also adds a description about the Receive Frame Status bits. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13drivers: net: davinci_mdio: restore mdio clk divider in mdio resumeMugunthan V N1-4/+1
During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 21:59:01 +0000