summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-07-23xen/balloon: don't online new memory initiallyJuergen Gross2-10/+15
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-23xen/grant-table: log the lack of grantsWengang Wang1-1/+8
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-22Merge tag 'hwmon-for-linus-v4.13-rc2' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
2017-07-22Merge tag 'tty-4.13-rc2' of ↵Linus Torvalds5-74/+75
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
2017-07-22Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds11-43/+45
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
2017-07-22Merge tag 'usb-4.13-rc2' of ↵Linus Torvalds22-62/+187
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
2017-07-22Merge tag 'staging-4.13-rc2' of ↵Linus Torvalds34-21/+4912
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for reported issues for 4.13-rc2. Also in here is a new driver, the virtualbox DRM driver. It's stand-alone and got acks from the DRM developers to go in through this tree. It's a new thing, but it should be fine for this point in the rc cycle due to it being independent. All of this has been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: add TL-WN722N v2 support staging: speakup: safely register and unregister ldisc staging: speakup: add functions to register and unregister ldisc staging: speakup: safely close tty staging: sm750fb: avoid conflicting vesafb staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code staging: vboxvideo: Add vboxvideo to drivers/staging staging: sm750fb: fixed a assignment typo staging: rtl8188eu: memory leak in rtw_free_cmd_obj() staging: vchiq_arm: fix error codes in probe staging: comedi: ni_mio_common: fix AO timer off-by-one regression
2017-07-21Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds8-28/+80
Pull block fixes from Jens Axboe: "A small set of fixes for -rc2 - two fixes for BFQ, documentation and code, and a removal of an unused variable in nbd. Outside of that, a small collection of fixes from the usual crew on the nvme side" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: don't report 0-bytes in serial number nvmet: preserve controller serial number between reboots nvmet: Move serial number from controller to subsystem nvmet: prefix version configfs file with attr nvme-pci: Fix an error handling path in 'nvme_probe()' nvme-pci: Remove nvme_setup_prps BUG_ON nvme-pci: add another device ID with stripe quirk nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association nvme: fix byte swapping in the streams code nbd: kill unused ret in recv_work bfq: dispatch request to prevent queue stalling after the request completion bfq: fix typos in comments about B-WF2Q+ algorithm
2017-07-21Merge tag 'for-linus' of ↵Linus Torvalds30-117/+288
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma fixes from Doug Ledford: "As per my previous pull request, there were two drivers that each had a rather large number of legitimate fixes still to be sent. As it turned out, I also missed a reasonably large set of fixes from one person across the stack that are all important fixes. All in all, the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull request. There were some other random fixes that I didn't send in the last pull request that I added to this one. This catches the rdma stack up to the fixes from up to about the beginning of this week. Any more fixes I'll wait and batch up later in the -rc cycle. This will give us a good base to start with for basing a for-next branch on -rc2. Summary: - i40iw fixes - bnxt_re fixes - Dan Carpenter bugfixes across stack - ten more random fixes, no more than two from any one person" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) RDMA/core: Initialize port_num in qp_attr RDMA/uverbs: Fix the check for port number IB/cma: Fix reference count leak when no ipv4 addresses are set RDMA/iser: don't send an rkey if all data is written as immadiate-data rxe: fix broken receive queue draining RDMA/qedr: Prevent memory overrun in verbs' user responses iw_cxgb4: don't use WR keys/addrs for 0 byte reads IB/mlx4: Fix CM REQ retries in paravirt mode IB/rdmavt: Setting of QP timeout can overflow jiffies computation IB/core: Fix sparse warnings RDMA/bnxt_re: Fix the value reported for local ack delay RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq RDMA/bnxt_re: Fix return value of poll routine RDMA/bnxt_re: Enable atomics only if host bios supports RDMA/bnxt_re: Specify RDMA component when allocating stats context RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP RDMA/bnxt_re: Report supported value to IB stack in query_device RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext ...
2017-07-21Merge tag 'drm-fixes-for-v4.13-rc2' of ↵Linus Torvalds13-64/+93
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix, some displayport mst fixes, and an amdkfd fix. Nothing too crazy, I assume we just haven't see much rc1 testing yet" * tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux: drm/mst: Avoid processing partially received up/down message transactions drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req() drm/mst: Fix error handling during MST sideband message reception drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure drm/imx: fix typo in ipu_plane_formats[] drm/vc4: Fix VBLANK handling in crtc->enable() path dma-buf/fence: Avoid use of uninitialised timestamp drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec drm/radeon: Remove initialization of shared_resources.num_mec drm/amdkfd: Remove unused references to shared_resources.num_mec drm/amdgpu: Fix KFD oversubscription by tracking queues correctly
2017-07-21Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A timer_irq_init() clocksource API robustness fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly
2017-07-21Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds4-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "A resume_irq() fix, plus a number of static declaration fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/digicolor: Drop unnecessary static irqchip/mips-cpu: Drop unnecessary static irqchip/gic/realview: Drop unnecessary static irqchip/mips-gic: Remove population of irq domain names genirq/PM: Properly pretend disabled state when force resuming interrupts
2017-07-21Merge tag 'imx-drm-fixes-2017-07-18' of ↵Dave Airlie2-2/+2
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm: fix parallel display regression and typo in plane format list - Fix a regression where the parallel-display driver would not probe anymore if no panel is specified in the device tree, since the introduction of drm_of_find_panel_or_bridge. - Fix a typo in the plane format list: replace a duplicate BGRA8888 format with BGRX8888, as originally intended. * tag 'imx-drm-fixes-2017-07-18' of git://git.pengutronix.de/git/pza/linux: drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure drm/imx: fix typo in ipu_plane_formats[]
2017-07-21Merge tag 'drm-misc-fixes-2017-07-20' of ↵Dave Airlie5-44/+90
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Core Changes: - fence: Introduce new fence flag to signify timestamp is populated (Chris) - mst: Avoid processing incomplete data + fix NULL dereference (Imre) Driver Changes: - vc4: Avoid WARN from grabbing a ref from vblank that's not on (Boris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Imre Deak <imre.deak@intel.com> * tag 'drm-misc-fixes-2017-07-20' of git://anongit.freedesktop.org/git/drm-misc: drm/mst: Avoid processing partially received up/down message transactions drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req() drm/mst: Fix error handling during MST sideband message reception drm/vc4: Fix VBLANK handling in crtc->enable() path dma-buf/fence: Avoid use of uninitialised timestamp
2017-07-21ide: avoid warning for timings calculationArnd Bergmann1-9/+9
gcc-7 warns about the result of a constant multiplication used as a boolean: drivers/ide/ide-timings.c: In function 'ide_timing_quantize': drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] q->setup = EZ(t->setup * 1000, T); This slightly rearranges the macro to simplify the code and avoid the warning at the same time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds43-287/+427
Pull networking fixes from David Miller: 1) BPF verifier signed/unsigned value tracking fix, from Daniel Borkmann, Edward Cree, and Josef Bacik. 2) Fix memory allocation length when setting up calls to ->ndo_set_mac_address, from Cong Wang. 3) Add a new cxgb4 device ID, from Ganesh Goudar. 4) Fix FIB refcount handling, we have to set it's initial value before the configure callback (which can bump it). From David Ahern. 5) Fix double-free in qcom/emac driver, from Timur Tabi. 6) A bunch of gcc-7 string format overflow warning fixes from Arnd Bergmann. 7) Fix link level headroom tests in ip_do_fragment(), from Vasily Averin. 8) Fix chunk walking in SCTP when iterating over error and parameter headers. From Alexander Potapenko. 9) TCP BBR congestion control fixes from Neal Cardwell. 10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger. 11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong Wang. 12) xmit_recursion in ppp driver needs to be per-device not per-cpu, from Gao Feng. 13) Cannot release skb->dst in UDP if IP options processing needs it. From Paolo Abeni. 14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander Levin and myself. 15) Revert some rtnetlink notification changes that are causing regressions, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) net: bonding: Fix transmit load balancing in balance-alb mode rds: Make sure updates to cp_send_gen can be observed net: ethernet: ti: cpsw: Push the request_irq function to the end of probe ipv4: initialize fib_trie prior to register_netdev_notifier call. rtnetlink: allocate more memory for dev_set_mac_address() net: dsa: b53: Add missing ARL entries for BCM53125 bpf: more tests for mixed signed and unsigned bounds checks bpf: add test for mixed signed and unsigned bounds checks bpf: fix up test cases with mixed signed/unsigned bounds bpf: allow to specify log level and reduce it for test_verifier bpf: fix mixed signed/unsigned derived min/max value bounds ipv6: avoid overflow of offset in ip6_find_1stfragopt net: tehuti: don't process data if it has not been copied from userspace Revert "rtnetlink: Do not generate notifications for CHANGEADDR event" net: dsa: mv88e6xxx: Enable CMODE config support for 6390X dt-binding: ptp: Add SoC compatibility strings for dte ptp clock NET: dwmac: Make dwmac reset unconditional net: Zero terminate ifr_name in dev_ifname(). wireless: wext: terminate ifr name coming from userspace netfilter: fix netfilter_net_init() return ...
2017-07-20net: bonding: Fix transmit load balancing in balance-alb modeKosuke Tatsukawa1-1/+1
balance-alb mode used to have transmit dynamic load balancing feature enabled by default. However, transmit dynamic load balancing no longer works in balance-alb after commit 8b426dc54cf4 ("bonding: remove hardcoded value"). Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to send packets. This function uses the parameter tlb_dynamic_lb. tlb_dynamic_lb used to have the default value of 1 for balance-alb, but now the value is set to 0 except in balance-tlb. Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb for balance-alb similar to balance-tlb. Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value") Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20net: ethernet: ti: cpsw: Push the request_irq function to the end of probeKeerthy1-24/+25
Push the request_irq function to the end of probe so as to ensure all the required fields are populated in the event of an ISR getting executed right after requesting the irq. Currently while loading the crash kernel a crash was seen as soon as devm_request_threaded_irq was called. This was due to n->poll being NULL which is called as part of net_rx_action function. Suggested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20net: dsa: b53: Add missing ARL entries for BCM53125Florian Fainelli1-0/+1
The BCM53125 entry was missing an arl_entries member which would basically prevent the ARL search from terminating properly. This switch has 4 ARL entries, so add that. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20Merge tag 'pm-4.13-rc2' of ↵Linus Torvalds2-6/+23
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These are two stable-candidate fixes for the intel_pstate driver and the generic power domains (genpd) framework. Specifics: - Fix the average CPU load computations in the intel_pstate driver on Knights Landing (Xeon Phi) processors that require an extra factor to compensate for a rate change differences between the TSC and MPERF which is missing (Srinivas Pandruvada). - Fix an initialization ordering issue in the generic power domains (genpd) framework (Sudeep Holla)" * tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present cpufreq: intel_pstate: Correct the busy calculation for KNL
2017-07-20Merge tag 'libnvdimm-fixes-4.13-rc2' of ↵Linus Torvalds5-20/+44
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A handful of small fixes for 4.13-rc2. Three of these fixes are tagged for -stable. They have all appeared in at least one -next release with no reported issues - Fix handling of media errors that span a sector - Fix support of multiple namespaces in a libnvdimm region being in device-dax mode - Clean up the machine check notifier properly when the nfit driver fails to register - Address a static analysis (smatch) report in device-dax" * tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix sysfs duplicate warnings MAINTAINERS: list drivers/acpi/nfit/ files for libnvdimm sub-system acpi/nfit: Fix memory corruption/Unregister mce decoder on failure device-dax: fix 'passing zero to ERR_PTR()' warning libnvdimm: fix badblock range handling of ARS range
2017-07-20Merge branch 'for-linus' of ↵Linus Torvalds2-12/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - HID multitouch 4.12 regression fix from Dmitry Torokhov - error handling fix for HID++ driver from Gustavo A. R. Silva * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value HID: multitouch: do not blindly set EV_KEY or EV_ABS bits
2017-07-20Merge branches 'intel_pstate' and 'pm-domains'Rafael J. Wysocki2-6/+23
* intel_pstate: cpufreq: intel_pstate: Correct the busy calculation for KNL * pm-domains: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
2017-07-20RDMA/core: Initialize port_num in qp_attrIsmail, Mustafa1-0/+2
Initialize the port_num for iWARP in rdma_init_qp_attr. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Cc: <stable@vger.kernel.org> # v2.6.14+ Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/uverbs: Fix the check for port numberIsmail, Mustafa1-1/+2
The port number is only valid if IB_QP_PORT is set in the mask. So only check port number if it is valid to prevent modify_qp from failing due to an invalid port number. Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds") Cc: <stable@vger.kernel.org> # v2.6.14+ Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/iser: don't send an rkey if all data is written as immadiate-dataSagi Grimberg1-2/+4
We might get some bogus error completions in case the target will remotely invalidate the rkey and the HCA will need to retransmit from this buffer. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20rxe: fix broken receive queue drainingVijay Immanuel2-0/+6
If we modified the qp to ERROR state, and drained the recieve queue, post_recv must trigger the responder task to complete the drain work request. Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>-- Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/qedr: Prevent memory overrun in verbs' user responsesAmrani, Ram1-4/+12
Wrap ib_copy_to_udata with a function that ensures that the data being copied over to user space isn't longer than the allowed. Fixes: cecbcddf6461 ("qedr: Add support for QP verbs") Fixes: a7efd7773e31 ("qedr: Add support for PD,PKEY and CQ verbs") Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs") Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20iw_cxgb4: don't use WR keys/addrs for 0 byte readsGanesh Goudar1-1/+1
Only use the read sge lkey/addr and the remote rkey/addr if the length of the read is not zero. Otherwise the read response might be treated as the RTR read response and not delivered to the application. Or worse Terminator hardware will fail a 0B read if the STAG is 0 even if the read length is 0. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/mlx4: Fix CM REQ retries in paravirt modeHåkon Bugge1-0/+4
CM REQs cannot be successfully retried, because a new pv_cm_id is created for each request, without checking if one already exists. By checking if an id exists before creating one, the bug is fixed. This bug can be provoked by running an RDMA CM user-land application, but inserting a five seconds delay before the rdma_accept() call on the passive side. This delay is larger than the default CMA timeout, and triggers a retry from the active side. The retried REQ will use another pv_cm_id (the cm_id on the wire). This confuses the CM protocol and two REJs are sent from the passive side. Here is an excerpt from ibdump running without the patch: 3.285092 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.382711 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.382861 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject 7.387644 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject and here is the same with bug fix applied: 3.251010 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 7.349387 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello) 8.258443 LID: 4 -> LID: 4 SDP 290 CM: ConnectReply(SDP Hello) 8.259890 LID: 4 -> LID: 4 InfiniBand 290 CM: ReadyToUse Suggested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reported-by: Wei Lin Guay <wei.lin.guay@oracle.com> Tested-by: Wei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/rdmavt: Setting of QP timeout can overflow jiffies computationKaike Wan1-3/+1
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause overflow due to the fact that the input to the function usecs_to_jiffies is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is equal to or greater than 30. The consequence is unnecessarily excessive retry and thus degradation of the system performance. This patch fixes the problem by limiting the input to 5-bit and calling usecs_to_jiffies() before multiplying the scaling factor. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/core: Fix sparse warningsMatan Barak1-10/+0
Delete unused variables to prevent sparse warnings. Fixes: db1b5ddd5336 ("IB/core: Rename uverbs event file structure") Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema") Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix the value reported for local ack delaySelvin Xavier2-1/+8
Local ack delay exposed by the driver is 0 which means infinite QP timeout. Reporting the default value to 16 (approx 260ms) Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cqSelvin Xavier3-0/+25
While invoking the req_notify_cq hook, ULPs can request whether the CQs have any CQEs pending. If CQEs are pending, drivers can indicate it by returning 1 for req_notify_cq. The stack will poll CQ again till CQ is empty. This patch peeks the CQ for any valid entries and return accordingly. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix return value of poll routineDevesh Sharma1-0/+1
Fix the incorrect reporting of number of polled entries by taking into account the max CQ depth in the driver. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Enable atomics only if host bios supportsDevesh Sharma3-2/+21
Driver shall check if the host system bios has enabled Atomic operations capability in PCI Device Control 2 register of the pci-device. Expose the ATOMIC_HCA flag only if the Atomic operations capability is set. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Specify RDMA component when allocating stats contextSomnath Kotur1-0/+1
Starting FW version 20.6.47, firmware is keeping separate statistics for L2 and RDMA. However, driver needs to specify RDMA or not when allocating stat_ctx. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QPEddie Wai1-2/+13
There's a couple of bugs in the support of max_rd_atomic and max_dest_rd_atomic. In the modify_qp, if the requested max_rd_atomic, which is the ORRQ size, is greater than what the chip can support, then we have to cap the request to chip max as we can't have the HW overflow the ORRQ. Capping the max_rd_atomic support internally is okay to do as the remaining read/atomic WRs will still be sitting in the SQ. However, for the max_dest_rd_atomic, the driver has to error out as this dictates the IRRQ size and we can't control what the remote side sends. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Report supported value to IB stack in query_deviceSelvin Xavier3-4/+12
- Report supported value for max_mr_size to IB stack in query_device. Also, check and log if MR size requested by application in reg_user_mr() is greater than value currently supported by driver. - Report only 4K page size support for now - Fix Max_QP value returned by ibv_devinfo -vv. In case of PF, FW reserves 129 QPs for creating QP1s of VFs and PF. So the max_qp value reported by FW for PF doesn'tt include the QP1. Fixing this issue by adding 1 with the value reported by FW. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID failsSelvin Xavier1-7/+9
This fix is added only to avoid system crash in some a specific scenario. When bnxt_re driver is loaded and if user tries to change interface mac address, delete GID fails because QP1 is still associated with existing MAC (default GID). If the above command fails GID tables are not modified in the h/w or driver, but the GID context memory is freed. Now, if the user changes the mac back to the original value, another add_gid comes to the driver where the driver reports that the GID is already present in its table and tries to access the context which was already freed. So, in this case, in order to avoid NULL pointer de-reference, this patch removes the context memory free if delete_gid fails and the same context memory is re-used in new add_gid. Memory cleanup will be taken care during driver unload, while deleting the GID table. Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing errorSomnath Kotur1-0/+10
Posting WQE size of 2 results in a WQE_FORMAT_ERROR thrown by the HW as it requires host to supply WQE Size with room for atleast one SGE so that the resulting WQE size be atleast 3. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontextDevesh Sharma2-31/+30
The driver must free the DPI during the dealloc_ucontext instead of freeing it during dealloc_pd. However, the DPI allocation scheme remains unchanged. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/mlx5: Fix a warning messageDan Carpenter1-1/+1
"umem" is a valid pointer. We intended to print "*umem" or even just "err" instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/ocrdma: Fix error codes in ocrdma_create_srq()Dan Carpenter1-0/+1
If either of these allocations fail then we return ERR_PTR(0). That's equivalent to NULL and results in a NULL pointer dereference in the caller. Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/ocrdma: Fix an error code in ocrdma_alloc_pd()Dan Carpenter1-1/+2
We should preserve the original "status" error code instead of resetting it to zero. Returning ERR_PTR(0) is the same as NULL and results in a NULL dereference in the callers. I added a printk() on error instead. Fixes: 45e86b33ec8b ("RDMA/ocrdma: Cache recv DB until QP moved to RTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/cxgb3: Fix error codes in iwch_alloc_mr()Dan Carpenter1-5/+4
We accidentally don't set the error code on some error paths. It means return ERR_PTR(0) which is NULL and results in a NULL dereference in the caller. Fixes: 13a239330abd ("RDMA/cxgb3: Don't ignore insert_handle() failures") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20cxgb4: Fix error codes in c4iw_create_cq()Dan Carpenter1-0/+1
If one of these kmalloc() calls fails then we return ERR_PTR(0) which is NULL. It results in a NULL dereference in the callers. Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/i40iw: Fix error code in i40iw_create_cq()Dan Carpenter1-1/+3
We accidentally forgot to set the error code if ib_copy_from_udata() fails. It means we return ERR_PTR(0) which is NULL and results in a NULL dereference in the callers. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20IB/IPoIB: Fix error code in ipoib_add_port()Dan Carpenter1-0/+1
We accidentally don't see the error code on some of these error paths. It means we return ERR_PTR(0) which is NULL and it results in a NULL dereference in the caller. This bug dates to pre-git days. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-20RDMA/bnxt_re: checking for NULL instead of IS_ERR()Dan Carpenter1-2/+2
bnxt_re_alloc_mw() doesn't return NULL, it returns error pointers. Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>