summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller50-183/+372
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-11/+4
Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets
2015-04-06net/mlx4_core: Fix error message deprecation for ConnectX-2 cardsJack Morgenstein1-1/+2
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") did the deprecation only for port 1 of the card. Need to deprecate for port 2 as well. Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06Merge branch 'for-linus' of ↵Linus Torvalds1-14/+23
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem - two more tweaks for ALPS driver to work out kinks after splitting the touchpad, trackstick, and potential external PS/2 mouse into separate input devices. Changes to support ALPS SS4 devices (protocol V8) will be coming in 4.1..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - document stick behavior for protocol V2 Input: alps - report V2 Dualpoint Stick events via the right evdev node Input: alps - report interleaved bare PS/2 packets via dev3
2015-04-06virtio: document queue state logicMichael S. Tsirkin1-5/+9
commit d631b94e7a15277858ec5f88d674d93080506999 virtio: change comment in transmit started clarifying the logic behind queue state management, but introduced an inaccuracy: TX_BUSY does not cause a BUG message. Clean this up some more, explaining the tradeoffs in detail. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06mvneta: dont call mvneta_adjust_link() manuallyStas Sergeev1-6/+1
mvneta_adjust_link() is a callback for of_phy_connect() and should not be called directly. The result of calling it directly is as below: Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-05Input: alps - report V2 Dualpoint Stick events via the right evdev nodeHans de Goede1-1/+6
On V2 devices the DualPoint Stick reports bare packets, these should be reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also has the INPUT_PROP_POINTING_STICK propbit set. Note that since there is no way to distinguish these packets from an external PS/2 mouse (insofar as these laptops have an external PS/2 port) this means that we will be reporting PS/2 mouse events via this evdev node too, as we've been doing in kernel 3.19 and older. This has been tested on a Dell Latitude D620 and a Dell Latitude E6400, which both have a V2 touchpad + a DualPoint Stick which reports bare packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-05Input: alps - report interleaved bare PS/2 packets via dev3Hans de Goede1-14/+18
Bare packets should be reported via the same evdev device independent on whether they are detected on the beginning of a packet or in the middle of a packet. This has been tested on a Dell Latitude E6400, where the DualPoint Stick reports bare packets, which get reported via dev3 when the touchpad is idle, and via dev2 when the touchpad and stick are used simultaneously. This commit fixes this inconsistency by always reporting bare packets via dev3. Note that since the come from a DualPoint Stick they really should be reported via dev2, this gets fixed in a later commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-04Merge tag 'usb-4.0-rc6' of ↵Linus Torvalds6-5/+26
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids for 4.0-rc6. Nothing major, some xhci fixes for reported problems, and some usb-serial device ids. All have been in linux-next for a while" * tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: ftdi_sio: Use jtag quirk for SNAP Connect E10 usb: isp1760: fix spin unlock in the error path of isp1760_udc_start usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers usb: xhci: handle Config Error Change (CEC) in xhci driver USB: keyspan_pda: add new device id USB: ftdi_sio: Added custom PID for Synapse Wireless product
2015-04-04Merge tag 'staging-4.0-rc6' of ↵Linus Torvalds17-91/+132
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some staging driver fixes, well, really all just IIO driver fixes, for 4.0-rc6. They fix issues that have been reported with these drivers. All of these patches have been in linux-next for a while" * tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: Use iio_trigger_get for indio_dev->trig assignment iio: adc: vf610: use ADC clock within specification iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build iio: core: Fix double free. iio:inv-mpu6050: Fix inconsistency for the scale channel staging: iio: dummy: Fix undefined symbol build error iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo staging: iio: hmc5843: Set iio name property in sysfs iio: bmc150: change sampling frequency iio: fix drivers that check buffer->scan_mask
2015-04-04Merge tag 'tty-4.0-rc6' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are 3 serial driver fixes for 4.0-rc6. They fix some reported issues with the samsung and fsl_lpuart drivers. All have been in linux-next for a while" * tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fsl_lpuart: clear receive flag on FIFO flush tty: serial: fsl_lpuart: specify transmit FIFO size serial: samsung: Clear operation mode on UART shutdown
2015-04-03Merge branch 'for-linus' of ↵Linus Torvalds2-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM
2015-04-03mvneta: implement SGMII-based in-band link state signalingStas Sergeev1-11/+95
When MDIO bus is unavailable (common setup for SGMII), the in-band signaling must be used to correctly track link state. This patch enables the in-band status delivery for link state changes, namely: - link up/down - link speed - duplex full/half fixed_phy_update_state() is used to update phy status. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03add fixed_phy_update_state() - update state of fixed_phyStas Sergeev1-0/+29
Currently fixed_phy uses a callback to periodically poll the link state. This patch adds the fixed_phy_update_state() API. It solves the following problems: - On link state interrupt, MAC driver can't update status. Instead it needs to provide the callback to periodically query the HW about the link state. It is more efficient to update status after interrupt. - The callback needs to be unregistered before phy_disconnect(), or otherwise it will be called with net_dev==NULL. phy_disconnect() does not have enough info to unregister the callback automatically. - The callback needs to be registered before of_phy_connect() to avoid running with outdated state, but of_phy_connect() returns the phy_device pointer, which is needed to register the callback. Registering it before of_phy_connect() will therefore require a hack to get the pointer earlier. Overall, this addition makes the subsequent patch that implements SGMII link status for mvneta, much cleaner. CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-15/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization fix, a reboot quirk and a kgdb fixlet" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kgdb/x86: Fix reporting of 'si' in kgdb on x86_64 x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk MAINTAINERS: Change the x86 microcode loader maintainer firmware: dmi_scan: Prevent dmi_num integer overflow
2015-04-03Merge tag 'devicetree-for-linus' of ↵Linus Torvalds1-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree fix from Grant Likely: "Simple bugfix for bad device tree data on the PA-Semi platform" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: drivers/of: Add empty ranges quirk for PA-Semi
2015-04-03i40e: Bump to version 1.3.1Catherine Sullivan1-2/+2
Bump. Change-ID: I7dc88baa33264e5919bc938adf76706573209432 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Refactor VF RSS codeAnjali Singhai Jain1-32/+11
Refactor VF RSS code to allow RSS on a single queue and eliminate the need for the next_queue function. Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: protect VLAN filter listMitch Williams1-2/+22
The MAC filter list is protected by a critical task bit, and the VLAN list should be protected as well. This prevents list corruption if the watchdog happens to run at the same time as a VLAN filter is being added or deleted. Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Communicate VSI id in place of VSI index to the VFsAnjali Singhai Jain4-53/+76
This does not affect the Virtual channel API as such but it changes the meaning of what is communicated to the VSI resource struct as vsi_id. Earlier vsi_idx was being passed in, which was the index in the PF's VSI array. Now we pass vsi_id as communicated by the FW to the driver. This will help with future expansion of VF and FW communication. With this in place now the VF and Virtual channel driver change to move over to VSI id use is complete and is validated. Change-ID: I14246ef82b3b3dc1fa76291d2dd0c05d12cedb7c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: stop flow director on shutdownMitch Williams1-0/+2
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: Ib98060d6352ec595ab9a78bfe252675a9fa5d8bc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix up VXLAN messagesShannon Nelson1-19/+19
When the VXLAN ports are added and removed, the messaging was giving some bogus index info, the port was always '0' for the delete, and the message text style didn't match other messages in the driver. Also, there was an over-use of the tertiary statement which made reading a little harder than necessary. Change-ID: Ie805182a697b8b4c12024403ada87fd4e4fa2358 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Don't register/de-register apps on NIC partitions in MFP modeNeerav Parikh1-0/+8
Do not register or try to de-register DCB applications with the DCBNL layer in case of NIC partitions when adapter is in MFP mode. Change-ID: I603d042a61983a6562be471c6a2b181572504118 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabledGreg Rose2-0/+27
If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: warn at the right timeMitch Williams1-3/+2
The call to pci_disable_sriov got moved, but the message about not disabling VFs didn't move. So move it. While we're at, reword the message a bit to make it more consistent with other driver messages. Change-ID: I17d3e15e4fcfd5c9431a96ecb0117d728d3da18b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix invalid void return in FCoE codeJesse Brandeburg1-2/+1
A function was calling i40e_tx_map with return, but tx_map returns void, and the caller returns void, so just drop the return, and everything is good. Change-ID: I53fc676d517864761e7cbb8ca83f1ef0c15b1f8f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: fix bug when skb allocation failsJesse Brandeburg2-2/+8
If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Change some memcpys to struct assignmentsJesse Brandeburg1-11/+8
Several memcpys are not necessary and can be changed to structure assignments. Struct assignments are always type safe so this is preferable. Change-ID: I7daf45a4b5e799c686b9d5c8ba9db047584ab82b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Print some more info to help figure out the cause of HMC errorAnjali Singhai Jain1-0/+3
HMC_ERRORINFO and HMC_ERRORDATA helps explain the cause of HMC error. Change-ID: I053bbc175a5f4c5c3e9ec2ea7400d5c56aaa4ec1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: validate VSI param from VFsMitch Williams1-0/+2
Validate that the VF has sent us a valid VSI index before actually using that index. Without this code, a malicious or buggy VF driver could panic the host by sending an invalid index into the VSI array. Change-ID: I66a177687a0dcc281ec83e714d3813d70d18c8b4 Reported-by: Nick Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Fix Outer UDP RX checksum codeAnjali Singhai Jain1-11/+13
Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds14-29/+58
Pull drm fixes from Dave Airlie: "One drm core fix, one exynos regression fix, two sets of radeon fixes (Alex was a bit behind last week), and two i915 fixes. Nothing too serious we seem to have calmed down i915 since last week" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix wait in radeon_mn_invalidate_range_start drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr drm: Exynos: Respect framebuffer pitch for FIMD/Mixer drm/i915: Reject the colorkey ioctls for primary and cursor planes drm/i915: Skip allocating shadow batch for 0-length batches drm/radeon: programm the VCE fw BAR as well drm/radeon: always dump the ring content if it's available radeon: Do not directly dereference pointers to BIOS area. drm/radeon/dpm: fix 120hz handling harder drm/edid: set ELD for firmware and debugfs override EDIDs
2015-04-02Merge tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linuxLinus Torvalds1-9/+48
Pull irqchip fixes from Jason Cooper: "This is the second round of fixes for irqchip. It contains some fixes found while the arm64 guys were writing the kvm gicv3 its emulation. GICv3 ITS: - Small batch of fixes discovered while writing the kvm ITS emulation" * tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Use non-cacheable accesses when no shareability irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion irqchip: gicv3-its: Fix device ID encoding irqchip: gicv3-its: Fix encoding of collection's target redistributor
2015-04-03Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-7/+8
into drm-fixes Just two small fixes for radeon, both destined for stable. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix wait in radeon_mn_invalidate_range_start drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr
2015-04-03Merge branch 'exynos-drm-fixes' of ↵Dave Airlie2-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fix display on issue to Exynos5250 based Snow(1366x768) board. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: Exynos: Respect framebuffer pitch for FIMD/Mixer
2015-04-03Merge tag 'drm-intel-fixes-2015-04-02' of ↵Dave Airlie2-3/+3
git://anongit.freedesktop.org/drm-intel into drm-fixes one oops fixes and a 0-length allocation fix from next backported. * tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Reject the colorkey ioctls for primary and cursor planes drm/i915: Skip allocating shadow batch for 0-length batches
2015-04-03Merge tag 'topic/drm-fixes-2015-04-02' of ↵Dave Airlie2-0/+2
git://anongit.freedesktop.org/drm-intel into drm-fixes Here's a single drm core fix, cc: stable, that affects i915 users. * tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/edid: set ELD for firmware and debugfs override EDIDs
2015-04-02Merge tag 'stable/for-linus-4.0-rc6-tag' of ↵Linus Torvalds2-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen regression fixes from David Vrabel: "Fix two regressions in the balloon driver's use of memory hotplug when used in a PV guest" * tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: before adding hotplugged memory, set frames to invalid x86/xen: prepare p2m list for memory hotplug
2015-04-02Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fix from Roland Dreier: "Fix for exploitable integer overflow in uverbs interface" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
2015-04-02net/mlx5_core: Extend struct mlx5_interface to support multiple protocolsSaeed Mahameed2-0/+23
Preparation for ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Modify arm CQ in preparation for upcoming Ethernet driverSaeed Mahameed1-2/+6
Pass consumer index as a parameter to arm CQ Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed4-104/+96
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Update module info macros for ConnectX4 SupportAchiad Shochat1-3/+3
Declare the support of new ConnectX4 HCA in module info Pump up the module version Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02IB/mlx5: Fix Mellanox copyright noteSaeed Mahameed12-12/+12
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix Mellanox copyright noteSaeed Mahameed18-18/+18
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix a bug in alloc_tokenAchiad Shochat1-1/+4
In alloc_token(), the token '1' would be allocated twice consecutively. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Avoid usage command work entry after writing command doorbellIra Gusinsky1-1/+2
Avoid usage of command work entry in cmd_work_handler since it can be released by mlx5_cmd_invoke before the work handler returns to running. Signed-off-by: Ira Gusinsky <irenag@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Avoid copying outbox in aysnc command completionEli Cohen1-1/+2
Avoid copying to the output buffer in cmd_exec since this is done after the command is completed. Failure to do this may cause cases where the callback handler is called before the copy done by cmd_exec which then overwrites it. Reported-by: Tamer Hleihel <tamerh@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Use coherent memory for command interface pageEli Cohen1-23/+49
Use coherent memory for the commands descriptor page. Take measures to make sure the page is aligned to MLX5_ADAPTER_PAGE_SIZE as required by the hardware. Reported-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Use the right inbox struct in destroy mkey commandAchiad Shochat1-1/+1
struct mlx5_query_mkey_mbox_in rather than mlx5_destroy_mkey_mbox_in Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 03:32:34 +0000