summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-10-06Merge branch 'master' of ↵David S. Miller24-148/+310
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-06gigaset: add kerneldoc commentsTilman Schmidt6-44/+166
Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: correct debugging output selectionTilman Schmidt1-3/+6
Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: improve error recoveryTilman Schmidt1-24/+45
When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix device ERROR response handlingTilman Schmidt1-8/+8
Clear out pending command that got rejected with 'ERROR' response. This fixes the bug where unloading the driver module would hang with the message: "gigaset: not searching scheduled commands: busy" after a device communication error. Impact: error handling bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: announce if built with debuggingTilman Schmidt1-1/+7
Mention in the driver load announcement whether the driver was built with debugging messages enabled, to facilitate support. Impact: informational message Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: handle isoc frame errors more gracefullyTilman Schmidt1-11/+7
Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: linearize skbTilman Schmidt1-0/+6
The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix reject/hangup handlingTilman Schmidt1-0/+5
Signal D channel disconnect in a few cases where it was missed, including when an incoming call is disconnected before it was accepted. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: make capidrv module parameter "debugmode" writeableTilman Schmidt1-1/+1
Being able to change the debugmode module parameter of capidrv on the fly is quite useful for debugging and doesn't do any harm. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: avoid races in capidrvTilman Schmidt1-12/+13
In several places, capidrv sends a CAPI message to the ISDN device and then updates its internal state accordingly. If the response message from the device arrives before the state is updated, it may be rejected or processed incorrectly. Avoid these races by updating the state before emitting the message. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: accept CAPI Informational Info values as successTilman Schmidt1-1/+1
Info values in the 0x00xx range are defined in the CAPI standard as "Informational, message processed successfully". Therefore a CONNECT_B3_CONF message with an Info value in that range should open an NCCI just as with Info==0. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug fix to properly update ethtool tx-checksumming after ethtool -K ↵Ajit Khaparde2-3/+3
<ifname> tx off This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Fix a typo in be_cmds.hAjit Khaparde1-1/+1
MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug Fix while accounting of multicast frames during netdev stats updateAjit Khaparde1-1/+1
While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix lock/mutex warnings.Ron Mercer4-17/+9
Get rid of spinlock and private mutex usage for exclusive access to the HW semaphore register. rtnl_lock already creates exclusive access to this register in all driver API. Add rtnl to firmware worker threads that also use the HW semaphore register. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix queueing of firmware handler in ISR.Ron Mercer1-3/+5
Check that we are not already polling firmware events before we queue the firmware event worker, then disable firmware interrupts. Otherwise we can queue the same event multiple times. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix some bit definitions for reset register.Ron Mercer1-3/+3
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Version update.Sreenivasa Honnur1-2/+2
- Version Update. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Allow multiple functions with INTA.Sreenivasa Honnur5-57/+64
- Allow multiple functions with INTA. - Removed the condition to allow only one vpath with INTA - Ensure that the alarm bit in titan_mask_all_int register is cleared when driver exits. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Check if FCS stripping is disabled by the firmware.Sreenivasa Honnur3-0/+33
- Added a function to check if FCS stripping is disabled by the firmware, if it is not disabled fail driver load. - By default FCS stripping is disabled by the firmware. With this assumption driver decrements the indicated packet length by 4 bytes(FCS length). - This patch ensures that FCS stripping is disabled during driver load time. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Removed unused functions.Sreenivasa Honnur1-204/+0
- Removed the wrr_rebalance function - This feature is not supported by the ASIC, hence removing the related code. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Fixed crash in PAE system due to wrong typecasting.Sreenivasa Honnur1-1/+1
- Fix a crash in PAE system due to wrong typecasting. - On PAE system size_t is unsigned int which is 32bit. Avoid casting 64 bit address to 32 bit Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Removed accessing non-supported registers.Sreenivasa Honnur2-6/+0
- Removed accessing GENDMA_INT register - This allowed the firmware to perform a generic DMA write to host memory. This feature is not supported by the ASIC, this patch removes access to GENDMA_INT register. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Update driver_config->vpath_per_dev for each function in probe.Sreenivasa Honnur1-1/+2
- Update driver_config->vpath_per_dev for each function in probe. - vpath_per_device specifies number of vpaths supported for each function/device. The current code was updating vpath_per_device only for physical device, however this has to be updated for each function also in case of a MF(Multi function) device. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Modify __vxge_hw_device_is_privilaged() to not assume function-0 as ↵Sreenivasa Honnur1-22/+30
the privileged function: Resubmit#1 - vxge driver was assuming function-0 is always the privilaged function. Now that restriction has been removed any function can act as a privilaged function. - This patch modifies the __vxge_hw_device_is_privilaged routine to not assume function-0 as the privileged function. - Recreated the patch by incorporating review comments from Dave Miller to remove double slash in path names. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add flushes between RAR writes when setting mac addressAlexander Duyck1-0/+7
There are some switches that will do write combining when they see two sequential regions written. In order to avoid any possible write combining issues it is necessary to add a flush after writing each piece of a rar register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add additional error handling to the phy codeAlexander Duyck1-14/+25
This update adds additional exception handling to the phy code to handle situations where it may be called incorrectly. In addition it adds some bounds checking to the cable length checks to prevent an array overrun in the event that the hardware returned a different value than expected. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add code to retry a phy read in the event of failure on link checkAlexander Duyck1-2/+8
This patch adds a retry to phy reads in the event of failure. The original code broke out of the loop on failure and this is a mistake as we should be trying to do the read twice. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: move the generic copper link setup code into e1000_phy.cAlexander Duyck3-41/+62
This patch moves the generic portion of the copper link setup into a seperate function in e1000_phy.c. This helps to reduce the size of copper_link_setup_82575 and make it a bit more readable. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: remove microwire support from igbAlexander Duyck2-36/+3
igb doesn't have any devices that use a microwire interface for NVM. As such the code related to this can be removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: change how we handle alternate mac addressesAlexander Duyck3-10/+22
This patch allows us to treat the alternate mac address as though it is the physical address on the adapter. This is accomplished by letting the alt_mac_address function to only fail on an NVM error. If no errors occur and the alternate mac address is not present then RAR0 is read as the default mac address. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: fix a few items where weren't correctly setup for mbx timeoutAlexander Duyck1-5/+14
The mailbox timeout routines need to be updated as they were not correctly handling the case of a mailbox timeout and could cause issues with long delays when used. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add function to handle mailbox lockAlexander Duyck1-29/+34
Both the read and write mailbox functions need to acquire the mailbox lock. Since that is the case we might as well combine both of the procedures into one function so it is easier to maintain. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add support for 82576NS SerDes adapterAlexander Duyck3-0/+3
This patch adds the device ID necessary to support the 82576NS SerDes adapter. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: make use of the uta to allow for promiscous mode filterAlexander Duyck4-47/+163
In order to support functions such as vlan tag stripping when SR-IOV is enabled any given packet must match at least one filter. However in the case of promiscous mode being enabled on the PF the traffic routed to it may not match any filters and is just sent to the PF by default. In order to make certain that this traffic is processed we can set all bits in the UTA registers to create a pseudo promiscous mode filter that accepts all packets. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add combined function for setting rar and pool bitsAlexander Duyck1-23/+40
This patch adds igb_rar_qsel which sets the mac address and pool bits for a given mac address in the receive address register table. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: add locking to reads of the i2c interfaceAlexander Duyck3-65/+119
The current implementation of sgmii support isn't correctly locking the interfaces for reads/writes. This change pulls the read/write functionality out of 82575.c and moves it to phy.c. In addition it replaces the implementation in 82575.c with one that uses locking around the relocated i2c interface calls. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: update the approach taken to acquiring and releasing the phy lockAlexander Duyck1-4/+7
The current approach is just using a ?: type mechanism to set the phy locking bit. This if fine for now but limits us to only 2. Switch to a nested if statement for future compatiblity with more than 2 phys. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: update comments for serdes config and update to handle duplexAlexander Duyck3-17/+40
This update corrects the driver so that it handles duplex for serdes links correctly instead of just forcing full duplex always. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06igb: remove unused temp variable from stats clearing pathAlexander Duyck2-88/+84
There is a temp variable in the stats clearing path that isn't needed since the results from the stats read can be immediately discared. Since it isn't needed we might as well just drop it from the function call. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06connector: Fix incompatible pointer type warningStephen Boyd1-1/+2
Commit 7069331 (connector: Provide the sender's credentials to the callback, 2009-10-02) changed callbacks to take two arguments but missed this one. drivers/connector/cn_proc.c: In function ‘cn_proc_init’: drivers/connector/cn_proc.c:263: warning: passing argument 3 of ‘cn_add_callback’ from incompatible pointer type Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05be2net: Fix a bug in preparation of mcc wrb which was causing flash ↵Ajit Khaparde1-1/+0
operation to fail This patch fixes a bug that got introduced in commit 76998bc7. During preparation of mcc wrb, req was being wrongly overwritten and the flash operation was failing. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05usbnet: Set device type for wlan and wwan devicesMarcel Holtmann1-0/+14
For usbnet devices with FLAG_WLAN and FLAG_WWAN set the proper device type so that uevent contains the correct value. This then allows an easy identification of the actual underlying technology of the Ethernet device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05usbnet: Use wwan%d interface name for mobile broadband devicesMarcel Holtmann2-6/+17
Add support for usbnet based devices like CDC-Ether to indicate that they are actually mobile broadband devices. In that case use wwan%d as default interface name. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05pcnet_cs: add cis of National Semicondoctor's multifunction pcmcia cardKen Kawasaki2-11/+11
pcnet_cs,serial_cs: add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card, NE2K, tamarack ethernet card, and some serial card(COMpad2, COMpad4). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05TI DaVinci EMAC: Minor macro related updateschaithrika@ti.com1-15/+11
Use BIT for macro definitions wherever possible, remove unused and redundant macros. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05net: Convert ethtool {get_stats, self_test}_count() ops to get_sset_count()Ben Hutchings6-55/+70
These string query operations were supposed to be replaced by the generic get_sset_count() starting in 2007. Convert the remaining implementations. Also remove calls to these operations to initialise drvinfo->n_stats. The ethtool core code already does that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05tehuti: Convert ethtool get_stats_count() ops to get_sset_count()Ben Hutchings1-15/+12
This string query operation was supposed to be replaced by the generic get_sset_count() starting in 2007. Convert tehuti's implementation. Also remove the dummy self-test name which was not used since tehuti does not advertise any self-tests. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05qeth: Convert ethtool get_stats_count() ops to get_sset_count()Ben Hutchings4-7/+12
This string query operation was supposed to be replaced by the generic get_sset_count() starting in 2007. Convert qeth's implementation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 20:00:37 +0000