summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2006-10-03[PATCH] i810fb: Honor the return value of pci_enable_deviceAntonino A. Daplas1-1/+5
Check the return value of pci_enable_device(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] nvidiafb: Honor the return value of pci_enable_deviceAntonino A. Daplas1-1/+5
Check the return value of pci_enable_device(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] matroxfb: Honor the return value of pci_register_driverAntonino A. Daplas1-4/+8
Check the return value of pci_register_driver() Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] atyfb: Honor the return value of pci_register_driverAntonino A. Daplas1-3/+5
Check return value of pci_register_driver(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] fbcon: Honor the return value of device_create_fileAntonino A. Daplas1-7/+27
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] fbdev: Honor the return value of device_create_fileAntonino A. Daplas1-7/+28
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] vt: Honor the return value of device_create_fileAntonino A. Daplas1-7/+24
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] fbcon: Remove cursor timer if unusedAntonino A. Daplas1-6/+11
Remove the cursor timer (cursor flashing) on the following conditions: - if vc is in KD_GRAPHICS mode, ie, when X owns the console - if vc is blanked This misbehavior was exposed by Dave Jones. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] fbcon: Use persistent allocation for cursor blinkingDave Jones3-10/+26
Every time the console cursor blinks, we do a kmalloc/kfree pair. This patch turns that into a single allocation. This allocation was the most frequent kmalloc I saw on my test box. [adaplas] Per Alan's suggestion, move global variables to fbcon's private structure. This would also avoid resource leaks when fbcon is unloaded. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] radeonfb: Use generic DDC readingDennis Munsie2-103/+4
Uses the generic ddc read functionality in fbmon.c instead of the previous functionality. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] savagefb: Use generic DDC readingAntonino A. Daplas2-43/+7
Update driver to use generic DDC reading [khali@linux-fr.org: fix oops in i2c handling] Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jurriaan <thunder7@xs4all.nl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] i810fb: Use generic DDC readingAntonino A. Daplas2-41/+2
Update driver to use generic DDC reading Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] rivafb: Use generic DDC readingAntonino A. Daplas2-42/+3
Update driver to use generic DDC reading Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] nvidiafb: Use generic DDC readingAntonino A. Daplas2-42/+4
Update driver to use generic DDC reading Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] fbdev: Add generic ddc read functionalityDennis Munsie3-0/+122
Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] vfb: Document option to enable the driverMike Frysinger1-1/+2
The Kconfig help text doesnt mention that in order to load the vfb module, you have to pass in the parameter vfb_enable=1 Document required module options in Kconfig for loading the vfb module. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] rivafb: use constants instead of magic valuesGuido Guenther1-4/+4
use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to Signed-off-by: Guido Guenther <agx@sigxcpu.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] au1100fb: Add option to enable/disable the cursorRodolfo Giometti1-4/+26
- add cursor enable/disable, very useful if you wish a full screen boot logo. Cursor can be disabled from kernel command line: video=au1100fb:nocursor,panel:Toppoly_TD035STED4 or from sysfs interface: echo 1 > /sys/module/au1100fb/parameters/nocursor - fix up some wrong indentation issues. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide-cs (CompactFlash) driver, rm irq warningDavid Brownell1-1/+1
Git rid of the runtime warning about pcmcia not supporting exclusive IRQs, so "the driver needs updating". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: more pci_find cleanupAlan Cox3-8/+15
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Allow ide_generic_all to be used modular and built inPatrick Jefferson1-9/+2
Allow ide/pci/generic to claim chipsets as a a module or when built-in. It requires using "all_generic_ide" as a boot option. Signed-off-by: Patrick Jefferson <henj@hp.com> Acked-by: Alan Cox <alan@redhat.com> Closes-Bug: 7017 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: Fix crash on repeated resetAlan Cox2-0/+9
Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated reset while the IDE layer was already resetting the channel caused a crash, and provided a rough fix. This is a slightly cleaner version of the fix which tracks the reset state and blocks further reset requests while a reset is in progress. Note this is not a security issue - random end users can't access the ioctl in question anyway. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] CONFIG_PM=n slim: drivers/ide/pci/sc1200.cAlexey Dobriyan1-0/+4
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] PCMCIA: Add few IDs into ide-csMarcin Juszkiewicz1-0/+5
Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: reprogram disk pio timings on resumeJason Lunz1-6/+19
Add a step to the IDE PM state machine that reprograms disk PIO timings as the first step on resume. This prevents ide deadlock on resume-from-ram on my nforce3-based laptop. An earlier implementation was written entirely within the amd74xx ide driver, but Alan helpfully pointed out that this is the correct thing to do globally. Still, I'm only calling hwif->tuneproc() for disks, based on two things: - The existing state machine is already passed over for non-disk drives - Previous testing on my laptop shows that the hangs are related only to the disk - suspend/resume from a livecd showed that there's no need for this on the cdrom. Signed-off-by: Jason Lunz <lunz@falooley.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brad Campbell <brad@wasp.net.au> Cc: David Brownell <david-b@pacbell.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: remove dma_base2 field from ide_hwif_tSergei Shtylyov3-25/+10
Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and without great need. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: John Keller <jpk@sgi.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] drivers/ide/: cleanupsAdrian Bunk2-20/+0
- setup-pci.c: remove the unused ide_pci_unregister_driver() - ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list) Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE core: driver layer error checkingRandy Dunlap3-9/+46
Check driver layer return values in IDE core. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: backport piix fixes from libata into the legacy driverAlan Cox1-9/+22
There are three flags being set by default by the PIIX driver for speeds > PIO 1, and one not being cleared properly on fallback to PIO0. The most important one is the prefetch/post write control which only works for ATA and can do bad things with ATAPI. The patch does its best to set the flags correctly for drivers/ide. Its not 100% perfect but its closer than the original. 100% perfect requires proper IORDY handling but this isn't critical (and its not right in libata either .. yet) Sergei Shtylyov <sshtylyov@ru.mvista.com> said: > + { 0, 0 }, > + { 0, 0 }, > + { 1, 0 }, > + { 2, 1 }, > + { 2, 3 }, }; > > pio = ide_get_best_pio_mode(drive, pio, 5, NULL); BTW, there's quite obvious error here which leads to access outside of timings[] if somebody passes PIO mode 5 (or autotuning code finds out that drive supports PIO mode 5). Could have been fixed while at it... Those drives should be rare, though... > + } > master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); > } > pci_write_config_word(dev, master_port, master_data); Actually, there's one more serious issue with piix_tune_drive() -- it doesn't actually set the drive's own transfer mode. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: fix revision comparison in ide_in_drive_listKirill Smelkov1-1/+1
Fix ide_in_drive_list: drive_table->id_firmware should be searched *in* id->fw_rev, not vice versa. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Enable cdrom dma access with pdc20265_oldTobias Oed1-11/+11
This patch allows me to use dma with my cd/dvd attached to my on board pdc20265 ide controller Alan sayeth: Looks sane. Would be nice to know if there is any documentation supporting this hack being safe but the logic makes sense. The LBA48 case faces the same problem - the state machine gets confused about the transfer length and needs kicking Signed-off-by: Tobias Oed <tobiasoed@hotmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide_dma_speed() fixesSergei Shtylyov1-52/+73
ide_dma_speed() fails to actually honor the IDE drivers' mode support masks) because of the bogus checks -- thus, selecting the DMA transfer mode that the driver explicitly refuses to support is possible. Additionally, there is no check for validity of the UltraDMA mode data in the drive ID, and the function is misdocumented. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Make number of IDE interfaces configurableMatt Mackall2-2/+2
Make IDE_HWIFS configurable if EMBEDDED This lets us lop as much as 16k off an x86 build. It's a little ugly, but it's dead simple. Note the fix for HWIFS < 2. Sizing interfaces dynamically unfortunately turns out to be pretty major surgery. add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182) function old new delta ide_hwifs 16920 1692 -15228 init_irq 1113 750 -363 ideprobe_init 283 138 -145 ide_pci_setup_ports 1329 1193 -136 save_match 85 - -85 ide_register_hw_with_fixup 367 287 -80 ide_setup 1364 1308 -56 is_chipset_set 40 4 -36 create_proc_ide_interfaces 225 205 -20 init_ide_data 84 67 -17 ide_probe_for_cmd640x 1198 1183 -15 ide_unregister 1452 1451 -1 Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE error handling fixesHua Zhong1-3/+6
In 2.6.15.1 I encountered some IDE crashes when unplugging IDE cables to emulate disk errors. Below is a patch against 2.6.16 which I think still applies. 1. The first BUG_ON could trigger when a PREFLUSH IO fails (it would fail the original barrier request which hasn't been marked REQ_STARTED yet). 2. the rq could have been dequeued already (same as 1). 3. HWGROUP(drive)->rq could be NULL because of the ide_error() several lines earlier. Signed-off-by: Hua Zhong <hzhong@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: always release DMA engineSergei Shtylylov1-9/+7
Release the DMA engine for the custom mapping IDE drivers also (for example, siimage.c does allocate it in both I/O-mapped and custom-mapped modes). Remove useless code from the error path of ide_allocate_dma_engine(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: claim extra DMA ports regardless of channelSergei Shtylylov2-15/+31
- Claim extra DMA I/O ports regardless of what IDE channels are present/enabled. - Remove extra ports handling from ide_mapped_mmio_dma() since it's not applicable to the custom-mapping IDE drivers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] non-libata driver for Jmicron devicesAlan Cox3-0/+276
Less functional than libata this just uses the merged interface provided for dumb legacy OS's. This is basically a bridge for people not yet ready to use libata for some reason or another. Port visibility is entirely dependant on the BIOS setup. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] pata_hpt366: fix typoOGAWA Hirofumi1-1/+1
switch(reg1 & 0x700) { case 5: info_hpt366.private_data = &hpt366_40; break; case 9: info_hpt366.private_data = &hpt366_25; break; default: info_hpt366.private_data = &hpt366_33; break; } The above runs always default part. It should be "(reg1 & 0x700) >> 8". Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IPMI: allow user to override the kernel IPMI daemon enableCorey Minyard1-2/+19
After the previous patch to disable the kernel IPMI daemon if interrupts were available, the issue of broken hardware was raised, and a reasonable request to add an override was mode. So here it is. Allow the user to force the kernel ipmi daemon on or off. This way, hardware with broken interrupts or users that are not concerned with performance can turn it on or off to their liking. [akpm@osdl.org: save 4 bytes in vmlinux] Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] restore parport_pc probing on powermacOlaf Hering1-4/+0
The last change for partport_pc did fix the common case for all PowerMacs, but it broke the case for PCI multiport IO cards. In fact, the config option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed the parport driver. It enables the winbond and smsc probing. Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will take care of it. All powerpc configs should have CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp boards we tested it on. Tested on a G4/466 with a PCI card: 0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2000800 [size=32] Region 2: I/O ports at f2000870 [size=8] Region 3: I/O ports at f2000860 [size=8] Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ISDN warning fixesAlan Cox7-26/+24
Clean up warnings in drivers/isdn by using long not int for the values where we pass void * and cast to integer types. The code is ok (ok passing the stuff this way isn't pretty but the code is valid). In all the cases I checked out the right thing happens anyway but this removes all the warnings. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] drivers/char/ip2: kill unused code, labelJeff Garzik1-2/+0
Kill warning: drivers/char/ip2/ip2main.c: In function ‘ip2_loadmain’: drivers/char/ip2/ip2main.c:782: warning: label ‘out_class’ defined but not used This driver's initialization (and cleanup of errors during init) is extremely convoluted, and could stand to be transformed into the standard unwinding-goto style of error cleanup. Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ipmi: fix uninitialized data bugJeff Garzik1-0/+1
gcc issues the following warning: drivers/char/ipmi/ipmi_si_intf.c: In function ‘init_ipmi_si’: drivers/char/ipmi/ipmi_si_intf.c:1729: warning: ‘data.irq’ may be used uninitialized in this function This is indeed a bug. data.irq is completely uninitialized in some code paths. Worse than that, data from a previous decode_dmi() run can easily leak through successive calls. Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] hp100: fix conditional compilation messJeff Garzik2-4/+6
The previous hp100 changeset attempted to kill warnings, but was only tested on !CONFIG_ISA platforms. The correct conditional compilation setup involves tested CONFIG_ISA rather than just MODULE. Fixes link on CONFIG_ISA platforms (i386) in current -git. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02Merge branch 'for-linus' of ↵Linus Torvalds4-64/+80
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Tweak trace message format IB/ehca: Fix device registration IB/ipath: Fix RDMA reads RDMA/cma: Optimize error handling RDMA/cma: Eliminate unnecessary remove_list RDMA/cma: Set status correctly on route resolution error RDMA/cma: Fix device removal race RDMA/cma: Fix leak of cm_ids in case of failures
2006-10-02IB/ehca: Tweak trace message formatHoang-Nam Nguyen1-1/+1
Add an extra space to make things more readable. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ehca: Fix device registrationHoang-Nam Nguyen1-17/+19
Move the call to ib_register_device() later, since a device should not be registered until it is completely read to be used. This fixes crashes that occur if an upper-layer driver such as IPoIB is loaded before the ehca module. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ipath: Fix RDMA readsRalph Campbell1-27/+32
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
2006-10-02RDMA/cma: Optimize error handlingKrishna Kumar1-10/+14
Reorganize code relating to cma_get_net_info() and rdam_create_id() to optimize error case handling (no need to alloc memory/etc. as part of rdma_create_id() if input parameters are wrong). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Eliminate unnecessary remove_listKrishna Kumar1-5/+1
Eliminate remove_list by using list_del_init() instead during device removal handling. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>