summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-02-27Merge branch 'for-linus' of ↵Linus Torvalds15-681/+679
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits) m68k: Define sigcontext ABI of ColdFire m68knommu: NPTL support for uClinux m68k: Add NPTL support m68k: Eliminate unused variable in page_to_phys() m68k: Switch to generic siginfo layout macfb: fix 24-bit visual and stuff macfb: cleanup fbdev: add some missing mac modes mac68k: start CUDA early valkyriefb: various fixes fbdev: mac_var_to_mode() fix mac68k: move macsonic and macmace platform devices mac68k: move mac_esp platform device mac68k: replace mac68k SCC code with platform device pmac-zilog: add platform driver pmac-zilog: cleanup mac68k: rework SWIM platform device mac68k: cleanup ataflop: Killl warning about unused variable flags m68k: Use DIV_ROUND_CLOSEST ...
2010-02-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds23-443/+562
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (35 commits) [S390] time: remove unused code [S390] zcore: Add prefix registers to dump header [S390] correct vdso version string [S390] add support for compressed kernels [S390] Define new s390 ELF note sections in elf.h [S390] codepage conversion of kernel parameter line [S390] seq_file: convert drivers/s390/ [S390] add z9-ec/z10 instruction to kernel disassembler [S390] dasd: correct offline processing [S390] dasd: fix refcounting. [S390] dasd: fix online/offline race [S390] use kprobes_built_in() in mm/fault code [S390] bug: use relative pointers in bug table entries [S390] Cleanup struct _lowcore usage and defines. [S390] free_initmem: reduce code duplication [S390] Replace ENOTSUPP usage with EOPNOTSUPP [S390] spinlock: check virtual cpu running status [S390] sysinfo: fix SYSIB 3,2,2 structure [S390] add MACHINE_IS_LPAR flag [S390] qdio: optimize cache line usage of struct qdio_irq ...
2010-02-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds47-1959/+2682
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds24-1236/+1115
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: validate late-added resources pcmcia: allow for extension of resource interval pcmcia: remove useless msleep in ds.c pcmcia: use read_cis_mem return value pcmcia: handle error in serial_cs config calls pcmcia: add locking to pcmcia_{read,write}_cis_mem pcmcia: avoid prod_id memleak pcmcia: avoid sysfs-related lockup for cardbus pcmcia: use state machine for extended requery pcmcia: delay re-scanning and re-querying of PCMCIA bus pcmcia: use pccardd to handle eject, insert, suspend and resume requests pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking pcmcia: use mutex for dynid lock pcmcia: assert locking to struct pcmcia_device pcmcia: add locking documentation pcmcia: simplify locking pcmcia: add locking to struct pcmcia_socket->pcmcia_state() pcmcia: protect s->device_count pcmcia: properly lock skt->irq, skt->irq_mask pcmcia: lock ops->set_socket ...
2010-02-27Merge branch 'next' of ↵Linus Torvalds14-86/+718
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits) powerpc: Fix lwsync feature fixup vs. modules on 64-bit powerpc: Convert pmc_owner_lock to raw_spinlock powerpc: Convert die.lock to raw_spinlock powerpc: Convert tlbivax_lock to raw_spinlock powerpc: Convert mpic locks to raw_spinlock powerpc: Convert pmac_pic_lock to raw_spinlock powerpc: Convert big_irq_lock to raw_spinlock powerpc: Convert feature_lock to raw_spinlock powerpc: Convert i8259_lock to raw_spinlock powerpc: Convert beat_htab_lock to raw_spinlock powerpc: Convert confirm_error_lock to raw_spinlock powerpc: Convert ipic_lock to raw_spinlock powerpc: Convert native_tlbie_lock to raw_spinlock powerpc: Convert beatic_irq_mask_lock to raw_spinlock powerpc: Convert nv_lock to raw_spinlock powerpc: Convert context_lock to raw_spinlock powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards powerpc/86xx: Enable VME driver on the GE SBC610 powerpc/86xx: Enable VME driver on the GE PPC9A powerpc/86xx: Add MSI section to GE PPC9A DTS ...
2010-02-27macfb: fix 24-bit visual and stuffFinn Thain1-84/+60
Lots of changes. Remove volatile keywords. Take the advice in the comments and change video_slot to slot_addr. Factor out fifteen or so "channel >> 8" shifts into three shifts higher up the call graph. Make csc_setpalette() atomic, pass the correct color values. Check for ioremap() failure. Add missing break statement, thus fixing 24 bit console visual (blue background bug). Remove some uninformative printk() noise. Add a description for powerbook 140/170 graphics. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27macfb: cleanupFinn Thain1-282/+295
Cleanup whitespace and code style. Remove unused #includes and prototypes. Remove obsolete, redundant or misleading comments. Remove dead code and redundant initialisers. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27fbdev: add some missing mac modesFinn Thain1-24/+28
Add the missing mac video modes for the Portrait and 12" RGB displays. The specs come from the Mac LC III developer note. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: start CUDA earlyFinn Thain2-35/+45
The valkyriefb driver needs the CUDA to work in order to set the video mode at boot. So initialise the device earlier, and bring the m68k code closer to the powermac code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27valkyriefb: various fixesFinn Thain3-73/+17
Valkyriefb and macfb will adopt the same card if they get the chance, so remove valkyrie support from macfb. Also fix the "valkyriefb: can't do 832x624x8" problem reported by Raylynn Knight some time ago, by adding vmode 13 support for CONFIG_MAC. Also add vmode 11 since that works too. Make use of the monitor sense lines on 68k Macs too. Also some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27fbdev: mac_var_to_mode() fixFinn Thain1-9/+31
The valkyriefb driver assumes that this logic holds: mac_vmode_to_var(X, cmode, &var); mac_var_to_vmode(&var, &vmode, &cmode); assert(vmode == X); But it doesn't hold because mac_var_to_vmode() can return a mode with a slower pixel clock, even when a match is available. So we end up with this failure: using video mode 11 and color mode 0. valkyriefb: vmode 12 not valid. valkyriefb: can't set default video mode valkyriefb: vmode 12 not valid. Rather than have mac_var_to_mode() return the first reasonable mode it finds, have it return the mode that is closest to the requested one (or the mode with the closest longer pixel clock period if there is no exact match). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: move macsonic and macmace platform devicesFinn Thain2-58/+8
Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: move mac_esp platform deviceFinn Thain1-52/+5
Move platform device code from the driver to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27pmac-zilog: add platform driverFinn Thain3-25/+156
Add platform driver support to the pmac-zilog driver, for m68k macs. Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27pmac-zilog: cleanupFinn Thain2-54/+51
Whitespace cleanups and comment typo fix. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: rework SWIM platform deviceFinn Thain1-2/+2
Adjust the platform device code to conform with the code style used in the rest of this patch series. No need to name resources nor to register devices which are not applicable. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27ataflop: Killl warning about unused variable flagsGeert Uytterhoeven1-2/+0
After commit e0c0978699a83f26f2341f7eedc1463b79e31aff ("ataflop: remove buggy/commented-out IRQ disable from do_fd_request()") the `flags' variable became unused: drivers/block/ataflop.c:1473: warning: unused variable 'flags' Hence remove it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27m68k: vme_scc - __init annotationsPeter Huewe1-6/+6
Trivial patch which adds the __init macro to the module_init function and all of its helper functions of drivers/char/vme_scc.c Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27MIPS: Alchemy: use 36bit addresses for PCMCIA resources.Manuel Lauss4-45/+23
On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus area. Currently, addresses at the far end of the 32bit area are assumed to belong to the PCMCIA area and fixed up to the real 36bit address before being passed to ioremap(). A previous commit enabled 64 bit physical size for the resource datatype on Alchemy and this allows to use the correct 36bit addresses when registering the PCMCIA sockets. This patch removes the 32-to-36bit address fixup and registers the Alchemy demo board pcmcia socket with the correct 36bit physical addresses. Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet card. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Remove /proc/octeon_ethernet_statsDavid Daney4-178/+0
This file shouldn't be in /proc, so we remove it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Reformat a bunch of comments.David Daney7-71/+44
Many of the comments didn't follow kerneldoc guidlines. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/971/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon: Free transmit SKBs in a timely mannerDavid Daney6-63/+142
If we wait for the once-per-second cleanup to free transmit SKBs, sockets with small transmit buffer sizes might spend most of their time blocked waiting for the cleanup. Normally we do a cleanup for each transmitted packet. We add a watchdog type timer so that we also schedule a timeout for 150uS after a packet is transmitted. The watchdog is reset for each transmitted packet, so for high packet rates, it never expires. At these high rates, the cleanups are done for each packet so the extra watchdog initiated cleanups are neither needed nor triggered. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Cc: Eric Dumazet <eric.dumazet@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/968/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> This version has spelling and comment changes based on feedback from Eric Dumazet.
2010-02-27Staging: Octeon: Run phy bus accesses on a workqueue.David Daney3-63/+109
When directly accessing a phy, we must acquire the mdio bus lock. To do that we cannot be in interrupt context, so we need to move these operations to a workqueue. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/965/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: octeon: remove unneeded includesDavid Daney6-6/+0
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/964/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MMC: AU1xMMC: Allow platforms to disable host capabilitiesManuel Lauss1-0/+4
Although the hardware supports a 4/8bit SD interface and the driver unconditionally advertises all hardware caps to the MMC core, not all datalines may actually be wired up. This patch introduces another field to au1xmmc platform data allowing platforms to disable certain advanced host controller features. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: linux-mmc@vger.kernel.org CC: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Implement clock APIFlorian Fainelli2-4/+24
This patch makes the ar7 clock code implement the Linux clk API. Drivers using the various clocks available in the SoC are updated accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> To: linux-mips@linux-mips.org Cc: Wim Van Sebroeck <wim@iguana.be> Cc: netdev@vger.kernel.org Cc: David Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Change the Email address of Wu ZhangjinWu Zhangjin4-4/+4
Currently wuzj@lemote.com is not usable; change it to wuzhangjin@gmail.com. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Use constants from in.hDavid Daney2-7/+4
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/837/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Enable scatter-gather.David Daney2-9/+55
Octeon ethernet hardware can handle NETIF_F_SG, so we enable it. A gather list of up to six fragments will fit in the SKB's CB structure, so no extra memory is required. If a SKB has more than six fragments, we must linearize it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Convert to NAPI.David Daney5-163/+235
Convert the driver to be a reasonably well behaved NAPI citizen. There is one NAPI instance per CPU shared between all input ports. As receive backlog increases, NAPI is scheduled on additional CPUs. Receive buffer refill code factored out so it can also be called from the periodic timer. This is needed to recover from temporary buffer starvation conditions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Rewrite transmit code.David Daney5-123/+150
Stop the queue if too many packets are queued. Restart it from a high resolution timer. Rearrange and simplify locking and SKB freeing code Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Fix memory allocation.David Daney2-20/+31
After aligning the blocks returned by kmalloc, we need to save the original pointer so they can be correctly freed. There are no guarantees about the alignment of SKB data, so we need to handle worst case alignment. Since right shifts over subtraction have no distributive property, we need to fix the back pointer calculation. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Remove unused code.David Daney6-284/+55
Remove unused code, reindent, and join some spilt strings. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic3-0/+662
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27NET: au1000-eth: Convert to platform_driver modelFlorian Fainelli2-218/+232
This patch converts the au1000-eth driver to become a full platform-driver as it ought to be. We now pass PHY-speficic configurations through platform_data but for compatibility the driver still assumes the default settings (search for PHY1 on MAC0) when no platform_data is passed. Tested on my MTX-1 board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/619/ Patchwork: http://patchwork.linux-mips.org/patch/963/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: physmap-flash for all devboardsManuel Lauss3-173/+0
Replace the devboard NOR MTD mapping driver with physmap-flash support. Also honor the "swapboot" switch settings wrt. to the layout of the NOR partitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27SERIAL 8250: Fixes for Alchemy UARTs.Manuel Lauss1-7/+8
Limit the amount of address space claimed for Alchemy serial ports to 0x1000. On the Au1300, ports are only 0x1000 apart, and the registers only extend to 0x110 at most on all supported alchemy models. On the Au1300 the autodetect logic no longer works and this makes it necessary to specify the port type through platform data. Because of this the MSR quirk needs to be moved outside the autoconfig() function which will no longer be called when UPF_FIXED_TYPE is specified. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss3-8/+8
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss3-16/+15
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss4-189/+369
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss6-444/+644
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss3-47/+47
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-26Merge branch 'for-linus' of ↵Linus Torvalds14-15/+428
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix preallocating of memory PM / Hibernate: Remove swsusp.c finally PM / Hibernate: Remove trailing space in message PM: Allow SCSI devices to suspend/resume asynchronously PM: Allow USB devices to suspend/resume asynchronously USB: implement non-tree resume ordering constraints for PCI host controllers PM: Allow PCI devices to suspend/resume asynchronously PM / Hibernate: Swap, remove useless check from swsusp_read() PM / Hibernate: Really deprecate deprecated user ioctls PM: Allow device drivers to use dpm_wait() PM: Start asynchronous resume threads upfront PM: Add facility for advanced testing of async suspend/resume PM: Add a switch for disabling/enabling asynchronous suspend/resume PM: Asynchronous suspend and resume of devices PM: Add parent information to timing messages PM: Document device power attributes in sysfs PM / Runtime: Add sysfs switch for disabling device run-time PM
2010-02-26Merge branch 'for_linus' of ↵Linus Torvalds6-192/+550
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: toshiba_acpi: Add full hotkey support hp-wmi: Add support for tablet rotation key dell-laptop: Add another Dell laptop to the DMI whitelist classmate-laptop: use a single MODULE_DEVICE_TABLE to get correct aliases dell-laptop: Pay attention to which devices the hardware switch controls dell-laptop: Use buffer with 32-bit physical address dell-laptop: Blacklist machines not supporting dell-laptop dell-laptop: Block software state changes when rfkill hard blocked dell-laptop: Fix small memory leak dell-laptop: Fix platform device unregistration dell-laptop: Update rfkill state on kill switch compal-laptop: Replace sysfs support with rfkill support compal-laptop: Add support for known Compal made Dell laptops MAINTAINERS: update drivers/platform/x86 information
2010-02-26Merge branch 'ibft-fixes' of ↵Linus Torvalds1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'ibft-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: ibft: Update MAINTAINERS file. drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds257-4585/+26403
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered by an ↵Ang Way Chuang1-0/+1
invalid Payload Pointer ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation has a bug that causes endless loop when Payload Pointer of MPEG2-TS frame is 182 or 183. Anyone who sends malicious MPEG2-TS frame will cause the receiver of ULE SNDU to go into endless loop. This patch was generated and tested against linux-2.6.32.9 and should apply cleanly to linux-2.6.33 as well because there was only one typo fix to dvb_net.c since v2.6.32. This bug was brought to you by modern day Santa Claus who decided to shower the satellite dish at Keio University with heavy snow causing huge burst of errors. We, receiver end, received Santa Claus's gift in the form of kernel bug. Care has been taken not to introduce more bug by fixing this bug, but please scrutinize the code for I always produces buggy code. Signed-off-by: Ang Way Chuang <wcang79@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds116-3291/+9988
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (158 commits) [SCSI] Fix printing of failed 32-byte commands [SCSI] Fix printing of variable length commands [SCSI] libsrp: fix bug in ADDITIONAL CDB LENGTH interpretation [SCSI] scsi_dh_alua: Add IBM Power Virtual SCSI ALUA device to dev list [SCSI] scsi_dh_alua: add netapp to dev list [SCSI] qla2xxx: Update version number to 8.03.02-k1. [SCSI] qla2xxx: EEH: Restore PCI saved state during pci slot reset. [SCSI] qla2xxx: Add firmware ETS burst support. [SCSI] qla2xxx: Correct loop-resync issues during SNS scans. [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback. [SCSI] qla2xxx: Correct EH bus-reset handling. [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out. [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands [SCSI] fix duplicate removal on error path in scsi_sysfs_add_sdev [SCSI] fix refcounting bug in scsi_get_host_dev [SCSI] fix memory leak in scsi_report_lun_scan [SCSI] lpfc: correct PPC build failure [SCSI] raid_class: add raid1e [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes. [SCSI] zfcp: Introduce header file for qdio structs and inline functions ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds12-483/+665
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds6-6/+122
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...