summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-02-21Input: gamecon - add rumble support for N64 padsScott Moreau2-6/+120
Add force-feedback support for N64 pads with rumble pak accessory installed. Actually we do not check for the presence of rumble pad but simply assume it is installed and expect the device to ignore FF commands if rumble pak is missing. Signed-off-by: Scott Moreau <oreaus@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-20Input: wacom - add device type to device name stringPing Cheng2-4/+15
Devices supporting both pen and touch features share the same product ID, but presented as 2 separate input devices. By adding device type to device name string we can help userspace applications and users differentiate between them. 'Finger' is used for the touch since touch has been used as a suffix by userland hotplugging services. Signed-off-by: Jason Childs <oblivian@users.sourceforge.net> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-20Input: s3c24xx_ts - report touch only when stylus is downVasily Khoruzhick1-14/+16
Currently driver reports touches when it gets (1 << ts.shift) samples, even if stylus is up, which is incorrect. We should only report coordinates and touch condition when stylus is down. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-19Input: s3c24xx_ts - re-enable IRQ on resumeVasily Khoruzhick1-0/+1
IRQ should be re-enabled on resume, otherwise driver stops reporting events. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-19Input: wacom - constify product features dataDmitry Torokhov1-63/+63
Features are not supposed to be modified; devices use their own private copies, so let's mark them const. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-19Input: wacom - use per-device instance of wacom_featuresJason Childs3-56/+78
Since we mangle data in wacom_features when dealing with certain devices let's use a private (per-device) instance of wacom_features in wacom_wac. This way same product ID can support more than one type of device, such as pen and touch, and not interfere with each other. Signed-off-by: Jason Childs <oblivian@users.sourceforge.net> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-16Input: sh_keysc - enable building on SH-Mobile ARMMagnus Damm1-1/+1
Update the Kconfig entry for the sh_keysc driver to enable build on SH-Mobile ARM platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: wacom - get features from driver infoBastian Blank3-152/+205
Get the features information from the driver info of the usb device id structure provided by the caller. The device ids and feature structs are strong coupled using indices. Signed-off-by: Bastian Blank <waldi@debian.org> Tested-by: Jason Childs <oblivian@users.sourceforge.net> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: rotary-encoder - set gpio direction for each requested gpioAndrew Clayton1-0/+14
Even with the correct pin mux settings, you still need to explicitly set the gpio direction. Call gpio_direction_input() after each requested gpio. Signed-off-by: Andrew Clayton <andrew@digital-domain.net> Signed-off-by: Mark Somerville <mark@scottishclimbs.com> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: sh_keysc - update the driver with mode 6Magnus Damm1-1/+2
Add mode 6 support to the sh_keysc driver. Also update the KYOUTDR mask value to include all 16 register bits. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: sh_keysc - switch to using bitmapsMagnus Damm1-25/+44
Use bitmaps instead of using 32-bit integers to keep track of the key states. With this change in place the driver supports key pads with more than 32 keys. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: sh_keysc - factor out hw access functionsMagnus Damm1-26/+43
Update the sh_keysc driver to factor out the register access functions sh_keysc_read(), sh_keysc_write() together with sh_keysc_level_mode(). This makes the code a bit easier to follow. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: schedule corgi_ssp and corgi_ts to be removedEric Miao1-1/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-10Input: mark {corgi,spitz,tosa}kbd drivers deprecatedEric Miao1-6/+12
Provided that now keyboards on these devices are fully supported by generic GPIO based matrix keypad driver, mark these hardcoded and difficult to maintain drivers as deprecated. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: gpio-keys - add support for disabling gpios through sysfsMika Westerberg1-11/+307
Now gpio-keys input driver exports 4 new attributes to userland through sysfs: /sys/devices/platform/gpio-keys/keys [ro] /sys/devices/platform/gpio-keys/switches [ro] /sys/devices/platform/gpio-keys/disabled_keys [rw] /sys/devices/platform/gpio-keys/disables_switches [rw] With these attributes, userland program can read which keys and switches can be disabled and then disable/enable them as needed. Keys and switches are exported as stringified bitmap of codes (keycodes or switch codes). For example keys 15, 89, 100, 101, 102 are exported as: '15,89,100-102'. Description of the attributes: keys - bitmap of keys which can be disabled switches - bitmap of switches which can be disabled disabled_keys - bitmap of currently disabled keys (bit 1 means disabled, 0 enabled) disabled_switches - bitmap of currently disabled switches (bit 1 means disabled, 0 enabled) Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: mark input interfaces as non-seekableDmitry Torokhov2-0/+4
Seeking does not make sense for input interfaces such as evdev and joydev so let's use nonseekable_open to mark them non-seekable. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: uinput - mark as non-seekableDmitry Torokhov1-0/+1
Seeking does not make sense for uinput so let's use nonseekable_open to mark the device non-seekable. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: add match() method to input hanldersDmitry Torokhov3-32/+37
Get rid of blacklist in input handler structure and instead allow handlers to define their own match() method to perform fine-grained filtering of supported devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - fix leaks and check return value of usb_submit_urb()Ondrej Zary1-3/+14
Fix urb leak in error path of initialization and make sure we handle errors from initial usb_submit_urb(). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - add NEXIO (or iNexio) supportOndrej Zary2-2/+264
Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver. Tested with NEX170MRT 17" LCD monitor with integrated touchscreen (with xserver-xorg-input-evtouch 0.8.8-1): T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0 D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1 P:  Vendor=1870 ProdID=0001 Rev= 1.00 S:  Manufacturer=iNexio S:  Product=iNexio USB C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none) E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms No datasheet is available, this was written by capturing some data with SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/ Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - find input endpoint automaticallyOndrej Zary1-3/+14
Find input enpoint automatically instead of assuming that the first one is OK. This is needed for devices with multiple endpoints such as iNexio where the first endpoint might be output. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - convert from usb_device to usb_interfaceOndrej Zary1-10/+12
Convert usbtouchscreen from storing usb_device to usb_interface. This is needed for multi-interface touchscreen devices such as iNexio. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-31Input: add imx-keypad driver to support the IMX Keypad PortAlberto Panizzo3-0/+604
The IMX family of Application Processors is shipped with a Keypad Port supported by this driver. The peripheral can control up to an 8x8 matrix key pad where all the scanning is done via software. The hardware provides two interrupts: one for key presses (KDI) and one for all key releases (KRI). There is also a simple circuit for glitch reduction (said for synchronization) made by two series of 3 D-latches clocked by the keypad-clock that stabilize the interrupts sources. KDI and KRI are fired only if the respective conditions are maintained for at last 4 keypad-clock cycle. Since those circuits are poor for a correct debounce process (the keypad-clock frequency is 32K and bounces longer than 94us are not masked) the driver, when an interrupt arrives, samples the matrix with a period of 10ms until the readins are stable for IMX_KEYPAD_SCANS_FOR_STABILITY times (currently set at 3). After getting stable result appropriate events are sent through the input stack. If some keys are maintained pressed, the driver continues to scan the matrix with a longer period (60ms) to catch possible multiple key presses without overloading the cpu. This process ends when all keys are released. This driver is tested to build in kernel or as a module and follow the specification of Freescale Application processors: i.MX25 i.MX27 i.MX31 i.MX35 i.MX51 especially tested on i.MX31. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30Input: Mac button emulation - allow compiling as a moduleDmitry Torokhov2-5/+16
Not all systems require Mac-style button emulation, however distributions enable it by default so it is readily available. Allow compiling it as a module so it can be loaded only on systems that actually require it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30Input: Mac button emulation - implement as an input filterDmitry Torokhov3-75/+188
Current implementation of Mac mouse button emulation plugs into legacy keyboard driver, converts certain keys into button events on a separate device, and suppresses the real events from reaching tty. This worked well enough until user space started using evdev which was completely unaware of this arrangement and kept sending original key presses to its users. Change the implementation to use newly added input filter framework so that original key presses are not transmitted to any handlers. As a bonus remove SYSCTL dependencies from the code and use Kconfig instead; also do not create the emulated mouse device until user activates emulation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30Input: implement input filtersDmitry Torokhov1-7/+34
Sometimes it is desirable to suppress certain events from reaching input handlers and thus user space. One such example is Mac mouse button emulation code which catches certain key presses and converts them into button clicks as if they were emitted by a virtual mouse. The original key press events should be completely suppressed, otherwise user space will be confused, and while keyboard driver does it on its own evdev is blissfully unaware of this arrangement. This patch adds notion of 'filter' to the standard input handlers, which may flag event as filtered thus preventing it from reaching other input handlers. Filters don't (nor will they ever) have a notion of priority relative to each other, input core will run all of them first and any one of them may mark event as filtered. This patch is inspired by similar patch by Matthew Garret but the implementation and intended usage are quite different. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-29Input: uinput - remove BKL from uinput_open functionThadeu Lima de Souza Cascardo1-3/+0
Commit 8702965848ed4bee27486a3e3d2ae34ebba6dd83 pushed down the BKL into uinput open function. However, there's nothing that needs locking in there. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: wm97xx - provide coordinate logs for accelerated I/OMark Brown2-0/+6
This aids debug of problematic systems. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-24Input: xpad - add rumble support for original xbox controllerBenjamin Valentin1-16/+37
Signed-off-by: Benjamin Valentin <benpicco@zedat.fu-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-24Input: xilinx_ps2 - use resource_sizeTobias Klauser1-2/+2
Use the resource_size inline function instead of manually calculating the resource size. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: John Linn <john.linn@xilinx.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-21Merge commit 'v2.6.33-rc5' into nextDmitry Torokhov1512-26724/+90967
2010-01-21Merge branch 'upstream-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: retry FS IOs even if it has failed with AC_ERR_INVALID
2010-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds6-73/+51
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix race in tty_fasync serial: serial_cs: oxsemi quirk breaks resume serial: imx: bit &/| confusion serial: Fix crash if the minimum rate of the device is > 9600 baud serial-core: resume serial hardware with no_console_suspend serial: 8250_pnp: use wildcard for serial Wacom tablets nozomi: quick fix for the close/close bug compat_ioctl: Supress "unknown cmd" message on serial /dev/console
2010-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds6-45/+59
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: hv: fix smp problems in the hyperv core code Staging: et131x: Fix 2.6.33rc1 regression in et131x Staging: asus_oled: fix oops in 2.6.32.2
2010-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2-21/+14
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert "sysdev: fix prototype for memory_sysdev_class show/store functions" driver-core: fix devtmpfs crash on s390
2010-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds16-48/+111
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: isp1362: fix build failure on ARM systems via irq_flags cleanup USB: isp1362: better 64bit printf warning fixes USB: fix usbstorage for 2770:915d delivers no FAT USB: Fix level of isp1760 Reloading ptd error message USB: FHCI: avoid NULL pointer dereference USB: Fix duplicate sysfs problem after device reset. USB: add speed values for USB 3.0 and wireless controllers USB: add missing delay during remote wakeup USB: EHCI & UHCI: fix race between root-hub suspend and port resume USB: EHCI: fix handling of unusual interrupt intervals USB: Don't use GFP_KERNEL while we cannot reset a storage device USB: fix bitmask merge error usb: serial: fix memory leak in generic driver USB: serial: fix USB serial fix kfifo_len locking
2010-01-21Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds6-43/+52
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: fs/bio.c: fix shadows sparse warning drbd: The kernel code is now equivalent to out of tree release 8.3.7 drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) drbd: Don't go into StandAlone mode when authentification failes because of network error drivers/block/drbd/drbd_receiver.c: correct NULL test cfq-iosched: Respect ioprio_class when preempting genhd: overlapping variable definition block: removed unused as_io_context DM: Fix device mapper topology stacking block: bdev_stack_limits wrapper block: Fix discard alignment calculation and printing block: Correct handling of bottom device misaligment drbd: check on CONFIG_LBDAF, not LBD drivers/block/drbd: Correct NULL test drbd: Silenced an assert that could triggered after changing write ordering method drbd: Kconfig fix drbd: Fix for a race between IO and a detach operation [Bugz 262] drbd: Use drbd_crypto_is_hash() instead of an open coded check
2010-01-21Input: sh_keysc - add mode 4 and mode 5 supportMagnus Damm1-3/+3
Add Mode 4 and Mode 5 support to the SH_KEYSC driver. These modes allow slightly larger key pad matrixes. While at it, make use of resource_size(). Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-20USB: isp1362: fix build failure on ARM systems via irq_flags cleanupLothar Wassmann1-7/+14
There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: isp1362: better 64bit printf warning fixesLothar Wassmann1-2/+2
Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix usbstorage for 2770:915d delivers no FATRyan May1-7/+0
Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May <rmay31@gmail.com> Cc: Rohan Hart <rohan.hart17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix level of isp1760 Reloading ptd error messageColin Tuckley1-3/+3
This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: FHCI: avoid NULL pointer dereferenceAlexander Beregalov1-1/+2
Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix duplicate sysfs problem after device reset.Sarah Sharp2-10/+23
Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add speed values for USB 3.0 and wireless controllersGreg Kroah-Hartman1-0/+6
These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add missing delay during remote wakeupAlan Stern3-3/+7
This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern2-2/+33
This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI: fix handling of unusual interrupt intervalsAlan Stern1-3/+8
This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Glynn Farrow <farrowg@sg.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Don't use GFP_KERNEL while we cannot reset a storage deviceOliver Neukum2-5/+5
Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix bitmask merge errorAlan Stern1-1/+2
This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 19:47:23 +0000