summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-06-02parport: quickfix the proc registration bugAlan Cox1-3/+10
Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-02pata_netcell: LBA48 force identify bits correctAlan Cox1-1/+12
This matches Bartlomiej's patch for ide_pci_generic: c339dfdd65b52bfd947ab29d1210314a2f6d622d In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-4/+16
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup e1000: add missing length check to e1000 receive routine forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Bluetooth: Remove useless flush_work() causing lockdep warnings
2009-06-02e1000: add missing length check to e1000 receive routineNeil Horman1-2/+3
Patch to fix bad length checking in e1000. E1000 by default does two things: 1) Spans rx descriptors for packets that don't fit into 1 skb on recieve 2) Strips the crc from a frame by subtracting 4 bytes from the length prior to doing an skb_put Since the e1000 driver isn't written to support receiving packets that span multiple rx buffers, it checks the End of Packet bit of every frame, and discards it if its not set. This places us in a situation where, if we have a spanning packet, the first part is discarded, but the second part is not (since it is the end of packet, and it passes the EOP bit test). If the second part of the frame is small (4 bytes or less), we subtract 4 from it to remove its crc, underflow the length, and wind up in skb_over_panic, when we try to skb_put a huge number of bytes into the skb. This amounts to a remote DOS attack through careful selection of frame size in relation to interface MTU. The fix for this is already in the e1000e driver, as well as the e1000 sourceforge driver, but no one ever pushed it to e1000. This is lifted straight from e1000e, and prevents small frames from causing the underflow described above Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02forcedeth: add phy_power_down parameter, leave phy powered up by default (v2)Ed Swierk1-2/+13
Add a phy_power_down parameter to forcedeth: set to 1 to power down the phy and disable the link when an interface goes down; set to 0 to always leave the phy powered up. The phy power state persists across reboots; Windows, some BIOSes, and older versions of Linux don't bother to power up the phy again, forcing users to remove all power to get the interface working (see http://bugzilla.kernel.org/show_bug.cgi?id=13072). Leaving the phy powered on is the safest default behavior. Users accustomed to seeing the link state reflect the interface state and/or wanting to minimize power consumption can set phy_power_down=1 if compatibility with other OSes is not an issue. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-01Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Update documentation on fan_max hwmon: (lm78) Add missing __devexit_p()
2009-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds15-44/+57
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: 3c509: Add missing EISA IDs MAINTAINERS: take maintainership of the cpmac Ethernet driver net/firmare: Ignore .cis files ath1e: add new device id for asus hardware mlx4_en: Fix a kernel panic when waking tx queue rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan mac8390: fix build with NET_POLL_CONTROLLER cxgb3: link fault fixes cxgb3: fix dma mapping regression netfilter: nfnetlink_log: fix wrong skbuff size calculation netfilter: xt_hashlimit does a wrong SEQ_SKIP bfin_mac: fix build error due to net_device_ops convert atlx: move modinfo data from atlx.h to atl1.c gianfar: fix babbling rx error event bug cls_cgroup: read classid atomically in classifier netfilter: nf_ct_dccp: add missing DCCP protocol changes in event cache netfilter: nf_ct_tcp: fix accepting invalid RST segments
2009-06-01hwmon: (lm78) Add missing __devexit_p()Mike Frysinger1-1/+1
The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-013c509: Add missing EISA IDsMaciej W. Rozycki1-0/+4
Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-30Merge branch 'for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide_pci_generic: add quirk for Netcell ATA RAID
2009-05-30ide_pci_generic: add quirk for Netcell ATA RAIDBartlomiej Zolnierkiewicz1-0/+11
We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" <trevor.hemsley@ntlworld.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-30Merge branch 'release' of ↵Linus Torvalds8-33/+53
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI, i915: build fix (v2) acpi-cpufreq: fix printk typo and indentation ACPI processor: remove spurious newline from warning message drm/i915: acpi/video.c fix section mismatch warning ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness ACPI: sanity check _PSS frequency to prevent cpufreq crash i7300_idle: allow testing on i5000-series hardware w/o re-compile PCI/ACPI: fix wrong ref count handling in acpi_pci_bind() cpuidle: fix AMD C1E suspend hang cpuidle: makes AMD C1E work in acpi_idle
2009-05-30Merge branch 'fixes' of ↵Linus Torvalds1-24/+47
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: fsldma: Fix compile warnings fsldma: fix memory leak on error path in fsl_dma_prep_memcpy() fsldma: snooping is not enabled for last entry in descriptor chain fsldma: fix infinite loop on multi-descriptor DMA chain completion fsldma: fix "DMA halt timeout!" errors fsldma: fix check on potential fdev->chan[] overflow fsldma: update mailling list address in MAINTAINERS
2009-05-29ath1e: add new device id for asus hardwareGreg Kroah-Hartman1-0/+1
Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29mlx4_en: Fix a kernel panic when waking tx queueYevgeny Petrilin1-4/+4
When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29Merge branch 'master' of ↵David S. Miller3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-05-29Merge branches 'bugzilla-13121+', 'bugzilla-13233', ↵Len Brown8-33/+37
'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
2009-05-29ACPI, i915: build fix (v2)Len Brown1-7/+7
drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' v2: move under DRM_I915 from DRM_I915_KMS Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-05-29ACPI processor: remove spurious newline from warning messageFrans Pop1-1/+1
Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29drm/i915: acpi/video.c fix section mismatch warningJaswinder Singh Rajput1-1/+1
Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightnessZhang Rui1-0/+8
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display ↵Zhang Rui1-0/+8
brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: sanity check _PSS frequency to prevent cpufreq crashLen Brown1-3/+9
When BIOS SETUP is changed to disable EIST, some BIOS hand the OS an un-initialized _PSS: Name (_PSS, Package (0x06) { Package (0x06) { 0x80000000, // frequency [MHz] 0x80000000, // power [mW] 0x80000000, // latency [us] 0x80000000, // BM latency [us] 0x80000000, // control 0x80000000 // status }, ... These are outrageous values for frequency, power and latency, raising the question where to draw the line between legal and illegal. We tend to survive garbage in the power and latency fields, but we can BUG_ON when garbage is in the frequency field. Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz. So disregard a _PSS with a frequency so large that it can't be represented by cpufreq. https://bugzilla.redhat.com/show_bug.cgi?id=500311 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds2-38/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func
2009-05-29Merge git://git.infradead.org/~dwmw2/mtd-2.6.30Linus Torvalds1-20/+23
* git://git.infradead.org/~dwmw2/mtd-2.6.30: jffs2: Fix corruption when flash erase/write failure mtd: MXC NAND driver fixes (v5)
2009-05-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds5-5/+29
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: Correct Makefile to make isp1760 buildable" usb-serial: fix crash when sub-driver updates firmware USB: isp1760: urb_dequeue doesn't always find the urbs USB: Yet another Conexant Clone to add to cdc-acm.c USB: atmel_usb_udc: Use kzalloc() to allocate ep structures USB: atmel-usba-udc : fix control out requests.
2009-05-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds3-2/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Driver Core: do not oops when driver_unregister() is called for unregistered drivers sysfs: file.c: use create_singlethread_workqueue()
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-29Merge branch 'drm-intel-next' of ↵Linus Torvalds3-6/+34
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: i915: Set object to gtt domain when faulting it back in drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing. drm/i915: Fix tiling pitch handling on 8xx.
2009-05-298250: Fix oops from setserialAlan Cox1-0/+15
If you setserial a port which has never been initialised we change the type but don't update the I/O method pointers. The same problem is true if you change the io type of a port - but nobody ever does that so nobody noticed! Remember the old type and when attaching if the type has changed reload the port accessor pointers. We can't do it blindly as some 8250 drivers load custom accessors and we must not stomp those. Tested-by: Victor Seryodkin <vvscore@gmail.com> Closes-bug: #13367 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29edac: AMD8111 & AMD8131 Kconfig fixupHarry Ciao2-2/+8
The amd8111_edac.c driver will fail allmodconfig on architectures other than PPC, introduce Kconfig dependency to avoid this, since both AMD8111 and AMD8131 chips are only adopted on Maple so far. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29edac: AMD8111 & AMD8131 use dev_name()Harry Ciao2-3/+3
The "bus_id" member in the device structure has been obsolete, use dev_name() instead. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29atmel_lcdfb: correct fifo size for some productsNicolas Ferre1-8/+2
Remove wrong fifo size definition for some AT91 products. Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048 (words) has been introduced by mistake. In fact, all products (AT91/AT32) are sharing the same fifo size of 512 words. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <avictor.za@gmail.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29S3C-fb: PM fixMarek Szyprowski1-1/+11
Correctly restore the FrameBuffer register state in the resume function. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29serial: 8250_gsc: fix printk format errorAlexander Beregalov1-2/+2
drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29parport_gsc: fix printk format errorAlexander Beregalov1-2/+2
drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29drivers/serial/mpc52xx_uart.c: fix array overindexing checkRoel Kluin1-1/+1
The check for an overindexing of mpc52xx_uart_{ports,nodes} has an off-by-one. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongleJohn W. Linville2-0/+3
http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scanJohn W. Linville1-6/+6
http://bugzilla.kernel.org/show_bug.cgi?id=13312 at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed, which then calls at76_config which needs the same mutex. This reworks the ordering to not hold the lock while calling ieee80211_scan_completed. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-29mtd: MXC NAND driver fixes (v5)Vladimir Barinov1-20/+23
The following patch fixes: - re-initialization of host->col_addr which is used as byte index between the successive READID flash commands. - compile error when CONFIG_PM is enabled - pass on the error code from clk_get() - return -ENOMEM in case of failed ioremap() - pass on the return value of platform_driver_probe() directly - remove excessive printk - let command line partition table parsing with mxc_nand name. The cmd_line parsing is done via <mtd-id> name that differs from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit" Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com> Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29mac8390: fix build with NET_POLL_CONTROLLERFinn Thain1-1/+1
Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion"). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: link fault fixesDivy Le Ray2-3/+10
Do not call t3_link_fault() under spinlock, as it calls msleep(). Besides, only the access to pi->link_fault needs to be serialized. Also initialize local variables before checking the link status, link state fields might otherwise end up containing garbage. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29cxgb3: fix dma mapping regressionDivy Le Ray2-8/+7
Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-28i7300_idle: allow testing on i5000-series hardware w/o re-compileLen Brown2-2/+6
Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-28Driver Core: do not oops when driver_unregister() is called for unregistered ↵Kay Sievers3-2/+11
drivers We also fix a problem with cleaning up properly when initializing drivers and devices, so checks like this will work successfully. Portions of the patch by Linus and Greg and Ingo. Reported-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28Revert "USB: Correct Makefile to make isp1760 buildable"Mike Frysinger1-1/+0
This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28usb-serial: fix crash when sub-driver updates firmwareAlan Stern1-0/+1
This patch (as1244) fixes a crash in usb-serial that occurs when a sub-driver returns a positive value from its attach method, indicating that new firmware was loaded and the device will disconnect and reconnect. The usb-serial core then skips the step of registering the port devices; when the disconnect occurs, the attempt to unregister the ports fails dramatically. This problem shows up with Keyspan devices and it might affect others as well. When the attach method returns a positive value, the patch sets num_ports to 0. This tells usb_serial_disconnect() not to try unregistering any of the ports; instead they are cleaned up by destroy_serial(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28USB: isp1760: urb_dequeue doesn't always find the urbsWarren Free1-2/+22
The option driver (and presumably others) allocates several URBs when it opens and tries to free them when it closes. The isp1760_urb_dequeue function gets called, but the packet being dequeued is not necessarily at the front of one of the 32 queues. If not, the isp1760_urb_done function doesn't get called for the URB and the process trying to free it hangs forever on a wait_queue. This patch does two things. If the URB being dequeued has others queued behind it, it re-queues them. And it searches the queues looking for the URB being dequeued rather than just looking at the one at the front of the queue. [bigeasy@linutronix] whitespace fixes, reformating Cc: stable <stable@kernel.org> Signed-off-by: Warren Free <wfree@ipmn.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28USB: Yet another Conexant Clone to add to cdc-acm.cXiao Kaijian1-0/+3
This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c Signed-off-by: Xiao Kaijian <xiaokj@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28USB: atmel_usb_udc: Use kzalloc() to allocate ep structuresHaavard Skinnemoen1-1/+1
This ensures that all fields are properly initialized. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 04:50:06 +0000