summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-02-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-11/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI boot fixes, one for arm64 and one for x86 systems with certain firmware versions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/fdt: Avoid FDT manipulation after ExitBootServices() x86/efi: Always map the first physical page into the EFI pagetables
2017-02-02Merge tag 'pci-v4.10-fixes-2' of ↵Linus Torvalds1-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL pointer dereference on topologies including these bridges)" * tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
2017-02-01efi/fdt: Avoid FDT manipulation after ExitBootServices()Ard Biesheuvel1-11/+3
Some AArch64 UEFI implementations disable the MMU in ExitBootServices(), after which unaligned accesses to RAM are no longer supported. Commit: abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel") fixed an issue in the memory map handling of the stub FDT code, but inadvertently created an issue with such firmware, by moving some of the FDT manipulation to after the invocation of ExitBootServices(). Given that the stub's libfdt implementation uses the ordinary, accelerated string functions, which rely on hardware handling of unaligned accesses, manipulating the FDT with the MMU off may result in alignment faults. So fix the situation by moving the update_fdt_memmap() call into the callback function invoked by efi_exit_boot_services() right before it calls the ExitBootServices() UEFI service (which is arguably a better place for it anyway) Note that disabling the MMU in ExitBootServices() is not compliant with the UEFI spec, and carries great risk due to the fact that switching from cached to uncached memory accesses halfway through compiler generated code (i.e., involving a stack) can never be done in a way that is architecturally safe. Fixes: abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Riku Voipio <riku.voipio@linaro.org> Cc: <stable@vger.kernel.org> Cc: mark.rutland@arm.com Cc: linux-efi@vger.kernel.org Cc: matt@codeblueprint.co.uk Cc: leif.lindholm@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1485971102-23330-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds32-247/+443
Pull networking fixes from David Miller: 1) Fix handling of interrupt status in stmmac driver. Just because we have masked the event from generating interrupts, doesn't mean the bit won't still be set in the interrupt status register. From Alexey Brodkin. 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha. 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich. 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman. 5) Initial MAC address can be set incorrectly in some scenerios, from Ivan Vecera. 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(), from Dan Carpenter. 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet. 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens Axboe. 9) Check for DMA mapping errors in starfire driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) tcp: fix 0 divide in __tcp_select_window() ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() net: fix ndo_features_check/ndo_fix_features comment ordering net/sched: matchall: Fix configuration race be2net: fix initial MAC setting ipv6: fix flow labels when the traffic class is non-0 net: thunderx: avoid dereferencing xcv when NULL net/sched: cls_flower: Correct matching on ICMPv6 code ipv6: Paritially checksum full MTU frames net/mlx4_core: Avoid command timeouts during VF driver device shutdown gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page net: ethtool: add support for 2500BaseT and 5000BaseT link modes can: bcm: fix hrtimer/tasklet termination in bcm op removal net: adaptec: starfire: add checks for dma mapping errors net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause can: Fix kernel panic at security_sock_rcv_skb net: macb: Fix 64 bit addressing support for GEM stmmac: Discard masked flags in interrupt status register net/mlx5e: Check ets capability before ets query FW command net/mlx5e: Fix update of hash function/key via ethtool ...
2017-02-01Merge tag 'dmaengine-fix-4.10-rc7' of ↵Linus Torvalds2-36/+52
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A couple of fixes showed up late in the cycle so sending them up and sending early in the week and not on Friday :). They fix a double lock in pl330 driver and runtime pm fixes for cppi driver" * tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pl330: fix double lock dmaengine: cppi41: Clean up pointless warnings dmaengine: cppi41: Fix oops in cppi41_runtime_resume dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage
2017-02-01Merge tag 'pinctrl-v4.10-4' of ↵Linus Torvalds4-10/+25
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Another week, another set of pin control fixes. The subsystem has seen high patch-spot activity recently. The majority of the patches are for Intel, I vaguely think it mostly concern phones, tablets and maybe chromebooks and even laptops with this Intel Atom family chips. Driver fixes only: - one fix to the Berlin driver making the SD card work fully again. - one fix to the Allwinner/sunxi bias function: one premature change needs to be partially reverted. - the remaining four patches are to Intel embedded SoCs: baytrail (three patches) and merrifield (one patch): register access debounce fixes and a missing spinlock" * tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler pinctrl: baytrail: Debounce register is one per community pinctrl: baytrail: Rectify debounce support (part 2) pinctrl: intel: merrifield: Add missed check in mrfld_config_set() pinctrl: sunxi: Don't enforce bias disable (for now) pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
2017-02-01be2net: fix initial MAC settingIvan Vecera1-5/+28
Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail. The MAC should be initialized only when: 1) no MAC is programmed (always except BE3 VFs during first init) 2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted. The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case. Example of failure without the fix (immediately after fresh boot): # ip link set eth0 up <- eth0 is BE3 PF be2net 0000:01:00.0 eth0: Link is Up # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF ... be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0 # ip link set eth8 up <- eth8 is created privileged VF be2net 0000:01:04.0: opcode 59-1 failed:status 1-76 RTNETLINK answers: Input/output error # echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF iommu: Removing device 0000:01:04.0 from group 33 ... # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again iommu: Removing device 0000:01:04.0 from group 33 ... # ip link set eth8 up be2net 0000:01:04.0 eth8: Link is Up Initialization is now OK. v2 - Corrected the comment and condition check suggested by Suresh & Harsha Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31Merge branch 'for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop throwing erroneous warnings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake Input: wm97xx - make missing platform data non-fatal
2017-01-31Merge branch 'for-4.10-fixes' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Three libata fixes: an error handling fix, blacklist addition for another fallout from upping the default max sectors, and fix for a sense data reporting bug which affects new harddrives which can report sense data" * 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: sata_mv:- Handle return value of devm_ioremap. libata: Fix ATA request sense libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices
2017-01-31Merge branch 'for-linus' of ↵Linus Torvalds5-30/+32
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fix (sleeping while atomic) for cp2112, from Johan Hovold - regression fix for proximity handling under certain circumstances in Wacom driver, from Jason Gerecke - functional fix for Logitech Rumblepad 2, from Ardinartsev Nikita * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: cp2112: fix gpio-callback error handling HID: cp2112: fix sleep-while-atomic HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2 HID: usbhid: Quirk a AMI virtual mouse and keyboard with ALWAYS_POLL HID: wacom: Fix poor prox handling in 'wacom_pl_irq'
2017-01-31net: thunderx: avoid dereferencing xcv when NULLVincent1-2/+1
This fixes the following smatch and coccinelle warnings: drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch] drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle] Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31HID: cp2112: fix gpio-callback error handlingJohan Hovold1-1/+1
In case of a zero-length report, the gpio direction_input callback would currently return success instead of an errno. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-31HID: cp2112: fix sleep-while-atomicJohan Hovold1-15/+11
A recent commit fixing DMA-buffers on stack added a shared transfer buffer protected by a spinlock. This is broken as the USB HID request callbacks can sleep. Fix this up by replacing the spinlock with a mutex. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-31Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wakeChristophe JAILLET1-2/+2
These tests are reversed. A warning should be displayed if an error is returned, not on success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-30Merge tag 'rtc-4.10-2' of ↵Linus Torvalds2-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fix from Alexandre Belloni: "A single fix for this cycle. It is worth taking it for 4.10 so that distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to y in their config. Summary: - Allow jz4740 to build as a module again by using kernel_halt()" * tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: jz4740: make the driver buildable as a module again
2017-01-30net/mlx4_core: Avoid command timeouts during VF driver device shutdownJack Morgenstein3-1/+14
Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'mlx5-fixes-2017-01-27' of ↵David S. Miller15-157/+181
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-01-27 A couple of mlx5 core and ethernet driver fixes. From Or, A couple of error return values and error handling fixes. From Hadar, Support TC encapsulation offloads even when the mlx5e uplink device is stacked under an upper device. From Gal, Two patches to fix RSS hash modifications via ethtool. From Moshe, Added a needed ets capability check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge tag 'wireless-drivers-for-davem-2017-01-29' of ↵David S. Miller6-16/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Most important here are fixes to two iwlwifi crashes, but there's also a firmware naming fix for iwlwifi and a revert of an older bcma patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_pageArseny Solokha1-2/+2
In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handlerAlexander Stein1-0/+2
According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Debounce register is one per communityAndy Shevchenko1-3/+10
Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Rectify debounce support (part 2)Andy Shevchenko1-4/+8
The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: intel: merrifield: Add missed check in mrfld_config_set()Andy Shevchenko1-0/+3
Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: sunxi: Don't enforce bias disable (for now)Maxime Ripard1-2/+1
Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRESJisheng Zhang1-1/+1
This should be a typo. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-29net: adaptec: starfire: add checks for dma mapping errorsAlexey Khoroshilov1-2/+43
init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]PauseSean Nyekjaer1-1/+1
As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: macb: Fix 64 bit addressing support for GEMRafal Ozieblo2-61/+147
This patch adds support for 32 bit GEM in 64 bit system. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29stmmac: Discard masked flags in interrupt status registerAlexey Brodkin1-0/+4
DW GMAC databook says the following about bits in "Register 15 (Interrupt Mask Register)": --------------------------->8------------------------- When set, this bit __disables_the_assertion_of_the_interrupt_signal__ because of the setting of XXX bit in Register 14 (Interrupt Status Register). --------------------------->8------------------------- In fact even if we mask one bit in the mask register it doesn't prevent corresponding bit to appear in the status register, it only disables interrupt generation for corresponding event. But currently we expect a bit different behavior: status bits to be in sync with their masks, i.e. if mask for bit A is set in the mask register then bit A won't appear in the interrupt status register. This was proven to be incorrect assumption, see discussion here [1]. That misunderstanding causes unexpected behaviour of the GMAC, for example we were happy enough to just see bogus messages about link state changes. So from now on we'll be only checking bits that really may trigger an interrupt. [1] https://lkml.org/lkml/2016/11/3/413 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Cc: David Miller <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29drm/i915: Check for NULL i915_vma in intel_unpin_fb_obj()Linus Torvalds1-0/+3
I've seen this trigger twice now, where the i915_gem_object_to_ggtt() call in intel_unpin_fb_obj() returns NULL, resulting in an oops immediately afterwards as the (inlined) call to i915_vma_unpin_fence() tries to dereference it. It seems to be some race condition where the object is going away at shutdown time, since both times happened when shutting down the X server. The call chains were different: - VT ioctl(KDSETMODE, KD_TEXT): intel_cleanup_plane_fb+0x5b/0xa0 [i915] drm_atomic_helper_cleanup_planes+0x6f/0x90 [drm_kms_helper] intel_atomic_commit_tail+0x749/0xfe0 [i915] intel_atomic_commit+0x3cb/0x4f0 [i915] drm_atomic_commit+0x4b/0x50 [drm] restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] intel_fbdev_set_par+0x18/0x70 [i915] fb_set_var+0x236/0x460 fbcon_blank+0x30f/0x350 do_unblank_screen+0xd2/0x1a0 vt_ioctl+0x507/0x12a0 tty_ioctl+0x355/0xc30 do_vfs_ioctl+0xa3/0x5e0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 - i915 unpin_work workqueue: intel_unpin_work_fn+0x58/0x140 [i915] process_one_work+0x1f1/0x480 worker_thread+0x48/0x4d0 kthread+0x101/0x140 and this patch purely papers over the issue by adding a NULL pointer check and a WARN_ON_ONCE() to avoid the oops that would then generally make the machine unresponsive. Other callers of i915_gem_object_to_ggtt() seem to also check for the returned pointer being NULL and warn about it, so this clearly has happened before in other places. [ Reported it originally to the i915 developers on Jan 8, applying the ugly workaround on my own now after triggering the problem for the second time with no feedback. This is likely to be the same bug reported as https://bugs.freedesktop.org/show_bug.cgi?id=98829 https://bugs.freedesktop.org/show_bug.cgi?id=99134 which has a patch for the underlying problem, but it hasn't gotten to me, so I'm applying the workaround. ] Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-29net/mlx5e: Check ets capability before ets query FW commandMoshe Shemesh1-0/+5
On dcbnl callback getpgtccfgtx, the driver should check the ets capability before ets query command is sent to firmware. It is valid to return from this void function without changing in/out parameters, as these parameters are initialized to DCB_ATTR_VALUE_UNDEFINED. Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5e: Fix update of hash function/key via ethtoolGal Pressman3-105/+109
Modifying TIR hash should change selected fields bitmask in addition to the function and key. Formerly, Only on ethool mlx5e_set_rxfh "ethtoo -X" we would not set this field resulting in zeroing of its value, which means no packet fields are used for RX RSS hash calculation thus causing all traffic to arrive in RQ[0]. On driver load out of the box we don't have this issue, since the TIR hash is fully created from scratch. Tested: ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5e: Modify TIRs hash only when it's neededGal Pressman1-5/+13
We don't need to modify our TIRs unless the user requested a change in the hash function/key, for example when changing indirection only. Tested: # Modify TIRs hash is needed ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> # Modify TIRs hash is not needed ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5e: Support TC encapsulation offloads with upper devicesHadar Hen Zion1-7/+6
When tunneling is used, some virtualizations systems set the (mlx5e) uplink device to be stacked under upper devices such as bridge or ovs internal port, where the VTEP IP address used for the encapsulation is set on that upper device. In order to support such use-cases, we also deal with a setup where the egress mirred device isn't representing a port on the HW e-switch to where the ingress device belongs. We use eswitch service function which returns the uplink and set it as the egress device of the tc encap rule. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5: E-Switch, Re-enable RoCE on mode change only after FDB destroyOr Gerlitz1-11/+18
We must re-enable RoCE on the e-switch management port (PF) only after destroying the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported, this re-enablement will fail. Also, it's more natural and symmetric to disable RoCE on the PF before we create the FDB under switchdev mode, so do that as well and revert if getting into error during the mode change later. Fixes: 9da34cd34e85 ('net/mlx5: Disable RoCE on the e-switch management [..]') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5: E-Switch, Err when retrieving steering name-space failsOr Gerlitz1-1/+2
Make sure to return error when we failed retrieving the FDB steering name space. Also, while around, correctly print the error when mode change revert fails in the warning message. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5: Return EOPNOTSUPP when failing to get steering name-spaceOr Gerlitz4-6/+6
When we fail to retrieve a hardware steering name-space, the returned error code should say that this operation is not supported. Align the various places in the driver where this call is made to this convention. Also, make sure to warn when we fail to retrieve a SW (ANCHOR) name-space. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29net/mlx5: Change ENOTSUPP to EOPNOTSUPPOr Gerlitz12-22/+22
As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx5 driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Suggested-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-01-29Merge branch 'parisc-4.10-3' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull two parisc fixes from Helge Deller: "One fix to avoid usage of BITS_PER_LONG in user-space exported swab.h header which breaks compiling qemu, and one trivial fix for printk continuation in the parisc parport driver" * 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header parisc, parport_gsc: Fixes for printk continuation lines
2017-01-28Merge branch 'i2c/for-current' of ↵Linus Torvalds2-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two I2C driver bugfixes. The 'VLLS mode support' patch should have been entitled 'reconfigure pinctrl after suspend' to make the bugfix more clear. Sorry, I missed that, yet didn't want to rebase" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx-lpi2c: add VLLS mode support i2c: i2c-cadence: Initialize configuration before probing devices
2017-01-28parisc, parport_gsc: Fixes for printk continuation linesHelge Deller1-4/+4
Signed-off-by: Helge Deller <deller@gmx.de>
2017-01-28Merge tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds4-45/+194
Pull MD fixes from Shaohua Li: "This fixes several corner cases for raid5 cache, which is merged into this cycle" * tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/r5cache: disable write back for degraded array md/r5cache: shift complex rmw from read path to write path md/r5cache: flush data only stripes in r5l_recovery_log() md/raid5: move comment of fetch_block to right location md/r5cache: read data into orig_page for prexor of cached data md/raid5-cache: delete meaningless code
2017-01-27PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchiesBjorn Helgaas1-6/+13
In a struct pcie_link_state, link->root points to the pcie_link_state of the root of the PCIe hierarchy. For the topmost link, this points to itself (link->root = link). For others, we copy the pointer from the parent (link->root = link->parent->root). Previously we recognized that Root Ports originated PCIe hierarchies, but we treated PCI/PCI-X to PCIe Bridges as being in the middle of the hierarchy, and when we tried to copy the pointer from link->parent->root, there was no parent, and we dereferenced a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffff9e424350>] pcie_aspm_init_link_state+0x170/0x820 Recognize that PCI/PCI-X to PCIe Bridges originate PCIe hierarchies just like Root Ports do, so link->root for these devices should also point to itself. Fixes: 51ebfc92b72b ("PCI: Enumerate switches below PCI-to-PCIe bridges") Link: https://bugzilla.kernel.org/show_bug.cgi?id=193411 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1022181 Tested-by: lists@ssl-mail.com Tested-by: Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.2+
2017-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds40-217/+388
Pull networking fixes from David Miller: 1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP DF on transmit). 2) Netfilter needs to reflect the fwmark when sending resets, from Pau Espin Pedrol. 3) nftable dump OOPS fix from Liping Zhang. 4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit, from Rolf Neugebauer. 5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd Bergmann. 6) Fix regression in handling of NETIF_F_SG in harmonize_features(), from Eric Dumazet. 7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern. 8) tcp_fastopen_create_child() needs to setup tp->max_window, from Alexey Kodanev. 9) Missing kmemdup() failure check in ipv6 segment routing code, from Eric Dumazet. 10) Don't execute unix_bind() under the bindlock, otherwise we deadlock with splice. From WANG Cong. 11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer, therefore callers must reload cached header pointers into that skb. Fix from Eric Dumazet. 12) Fix various bugs in legacy IRQ fallback handling in alx driver, from Tobias Regnery. 13) Do not allow lwtunnel drivers to be unloaded while they are referenced by active instances, from Robert Shearman. 14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven. 15) Fix a few regressions from virtio_net XDP support, from John Fastabend and Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits) ISDN: eicon: silence misleading array-bounds warning net: phy: micrel: add support for KSZ8795 gtp: fix cross netns recv on gtp socket gtp: clear DF bit on GTP packet tx gtp: add genl family modules alias tcp: don't annotate mark on control socket from tcp_v6_send_response() ravb: unmap descriptors when freeing rings virtio_net: reject XDP programs using header adjustment virtio_net: use dev_kfree_skb for small buffer XDP receive r8152: check rx after napi is enabled r8152: re-schedule napi for tx r8152: avoid start_xmit to schedule napi when napi is disabled r8152: avoid start_xmit to call napi_schedule during autosuspend net: dsa: Bring back device detaching in dsa_slave_suspend() net: phy: leds: Fix truncated LED trigger names net: phy: leds: Break dependency of phy.h on phy_led_triggers.h net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash net-next: ethernet: mediatek: change the compatible string Documentation: devicetree: change the mediatek ethernet compatible string bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status(). ...
2017-01-27Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds8-27/+88
Pull block fixes from Jens Axboe: "A set of fixes for this series. This contains: - Set of fixes for the nvme target code - A revert of patch from this merge window, causing a regression with WRITE_SAME on iSCSI targets at least. - A fix for a use-after-free in the new O_DIRECT bdev code. - Two fixes for the xen-blkfront driver" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "sd: remove __data_len hack for WRITE SAME" nvme-fc: use blk_rq_nr_phys_segments nvmet-rdma: Fix missing dma sync to nvme data structures nvmet: Call fatal_error from keep-alive timout expiration nvmet: cancel fatal error and flush async work before free controller nvmet: delete controllers deletion upon subsystem release nvmet_fc: correct logic in disconnect queue LS handling block: fix use after free in __blkdev_direct_IO xen-blkfront: correct maximum segment accounting xen-blkfront: feature flags handling adjustments
2017-01-27Merge tag 'for-linus' of ↵Linus Torvalds24-188/+253
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Second round of -rc fixes for 4.10. This -rc cycle has been slow for the rdma subsystem. I had already sent you the first batch before the Holiday break. After that, we kept only getting a few here or there. Up until this week, when I got a drop of 13 to one driver (qedr). So, here's the -rc patches I have. I currently have none held in reserve, so unless something new comes in, this is it until the next merge window opens. Summary: - series of iw_cxgb4 fixes to make it work with the drain cq API - one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem, rxe, and ipoib - one big series (13 patches) for the new qedr driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits) RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled IB/rxe: Prevent from completer to operate on non valid QP IB/rxe: Fix rxe dev insertion to rxe_dev_list IB/umem: Release pid in error and ODP flow RDMA/qedr: Dispatch port active event from qedr_add RDMA/qedr: Fix and simplify memory leak in PD alloc RDMA/qedr: Fix RDMA CM loopback RDMA/qedr: Fix formatting RDMA/qedr: Mark three functions as static RDMA/qedr: Don't reset QP when queues aren't flushed RDMA/qedr: Don't spam dmesg if QP is in error state RDMA/qedr: Remove CQ spinlock from CM completion handlers RDMA/qedr: Return max inline data in QP query result RDMA/qedr: Return success when not changing QP state RDMA/qedr: Add uapi header qedr-abi.h RDMA/qedr: Fix MTU returned from QP query RDMA/core: Add the function ib_mtu_int_to_enum IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path IB/vmw_pvrdma: Don't leak info from alloc_ucontext IB/cxgb3: fix misspelling in header guard ...
2017-01-27Merge branch 'stable/for-linus-4.10' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "An ARM fix in the Xen SWIOTLB - mainly the translation of physical to bus addresses was done just a tad too late" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: update dev_addr after swapping pages
2017-01-27Merge tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfioLinus Torvalds1-0/+4
Pull VFIO fix from Alex Williamson: "mdev IOMMU groups are not yet compatible with the powerpc SPAPR IOMMU backend, detect and fail group attach (Greg Kurz)" * tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio: vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
2017-01-27RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabledJack Morgenstein1-1/+2
If IPV6 has not been enabled in the underlying kernel, we must avoid calling IPV6 procedures in rdma_cm.ko. This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements surrounding any code which calls external IPV6 procedures. In the instance fixed here, procedure cma_bind_addr() called ipv6_addr_type() -- which resulted in calling external procedure __ipv6_addr_type(). Fixes: 6c26a77124ff ("RDMA/cma: fix IPv6 address resolution") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-27Merge branch 'stable/for-jens-4.10' of ↵Jens Axboe1-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Konrad writes: Please pull in your 'for-linus' branch two little fixes for Xen block front: One fix is for handling the XEN_PAGE_SIZE != PAGE_SIZE (4KB vs 64KB on ARM for example) mishandling while the other is fixing the accounting for the configuration changes.
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 18:09:33 +0000