summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds89-106/+113
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds22-112/+3420
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-10-01Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-20/+32
Pull ARM soc-specific updates, take 2 from Olof Johansson: "This branch converts the MXS Freescale platform to use irqdomains and sparse IRQ, in preparation for DT probing and multiplatform kernels." * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: remove mach/irqs.h ARM: mxs: select SPARSE_IRQ ARM: mxs: adopt irq_domain support for icoll driver ARM: mxs: select MULTI_IRQ_HANDLER ARM: mxs: retrieve timer irq from device tree gpio/mxs: adopt irq_domain support for mxs gpio driver
2012-10-01Merge tag 'cleanup2' of ↵Linus Torvalds6-765/+44
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc cleanups, part 2 from Olof Johansson: "A shorter cleanup branch submitted separately due to dependencies with some of the previous topics. Major thing here is that the Broadcom bcmring platform is removed. It's an SoC that's used on some stationary VoIP platforms, and is in desperate need of some cleanup. Broadcom came back and suggested that we just deprecate the platform for now, since they aren't going to spend the resources needed on cleaning it up, and there are no users of the platform directly from mainline." Fix some conflicts due to BCM2835 getting added next to the removed BCMRING, and removal of tegra files that had been converted to devicetree. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO ARM: Remove mach-bcmring ARM: clps711x: Remove board support for CEIVA ARM: clps711x: Fix register definitions ARM: clps711x: Fix lowlevel debug-macro ARM: clps711x: Added simple clock framework pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl ARM: tegra: delete unused headers ARM: tegra: remove useless includes of <mach/*.h> ARM: tegra: remove dead code
2012-10-01Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds20-285/+1354
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
2012-10-01Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds9-0/+452
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds56-758/+547
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds14-30/+31
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-10-01Merge tag 'hwmon-for-linus' of ↵Linus Torvalds52-859/+1353
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers for: MCP3221, ADT7410, MAX197 Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112, MAX1113, INA220, INA230, MCP3221 Cleanup: Use devm_ functions, fixed build warnings, removed deprecated sysfs attributes, code simplifications, dropped dependencies on EXPERIMENTAL" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (mcp3021) Add MCP3221 support hwmon: (mcp3021) Prepare MCP3021 driver to support other chips hwmon: (w83791d) Drop unnecessary compare statements hwmon: (lm93) Drop unnecessary compare statement hwmon: (lm70) Simplify show_name function hwmon: (adcxx) Simplify show_name function hwmon: Drop dependencies on EXPERIMENTAL hwmon: (it87) Fix Kconfig for IT87 driver hwmon: (sht15) move header to linux/platform_data/ hwmon: (asus_atk0110) Remove useless kfree hwmon: (ina2xx) Add support for INA220 and INA230 hwmon: (ina2xx) Use structure array to distinguish chip types hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113 hwmon: (lm70) Add support for LM71 and LM74 hwmon: (Documentation) Update feature-removal-schedule.txt hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes hwmon: (w83792d) Remove legacy chassis intrusion detection attributes hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute hwmon: (lm70) Allow 4wire SPI bus with LM70 hwmon: (sht15) remove multiple driver registration ...
2012-10-01Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds283-8445/+25557
Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds151-3933/+17295
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-10-01Merge tag 'staging-3.6' of ↵Linus Torvalds643-26502/+50648
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg Kroah-Hartman: "Here is the big staging tree update for the 3.7-rc1 merge window. There are a few patches in here that are outside of the staging area, namely HID and IIO patches, but all of them have been acked by the relevant subsystem maintainers. The IIO stuff is still coming in through this tree as it hasn't entirely moved out of the staging tree, but is almost there. Other than that, there wa a ton of work on the comedi drivers to make them more readable and the correct style. Doing that removed a lot of code, but we added a new driver to the staging tree, so we didn't end up with a net reduction this time around: 662 files changed, 51649 insertions(+), 26582 deletions(-) All of these patches have been in the linux-next tree already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits) staging: comedi: jr3_pci: fix iomem dereference staging: comedi: drivers: use comedi_fc.h cmdtest helpers Staging: winbond: usb_free_urb(NULL) is safe Staging: winbond: checkpatch cleanup Staging: winbond: Removed undesired spaces, lines and tabs Staging: winbond: Typo corrections in comments Staging: winbond: Changed c99 comments to c89 comments staging: r8712u: Do not queue cloned skb staging: comedi: ni_mio_common: always lock in ni_ai_poll() staging: comedi: s626: add FIXME comment staging: comedi: s626: don't dereference insn->data staging: comedi: s526: fix if() check in s526_gpct_winsn() staging: comedi: s626: cleanup comments in s626_initialize() staging: comedi: s626: remove clear of kzalloc'ed data staging: comedi: s626: remove 'WDInterval' from private data staging: comedi: s626: remove 'ChargeEnabled' from private data staging: comedi: s626: remove 'IsBoardRevA' comment staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND" staging: comedi: s626: remove 'allocatedBuf' from private data staging: comedi: s626: add final attach message ...
2012-10-01Merge tag 'driver-core-3.6' of ↵Linus Torvalds26-308/+1905
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core merge from Greg Kroah-Hartman: "Here is the big driver core update for 3.7-rc1. A number of firmware_class.c updates (as you saw a month or so ago), and some hyper-v updates and some printk fixes as well. All patches that are outside of the drivers/base area have been acked by the respective maintainers, and have all been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl() device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit] Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit dev: Add dev_vprintk_emit and dev_printk_emit netdev_printk/netif_printk: Remove a superfluous logging colon netdev_printk/dynamic_netdev_dbg: Directly call printk_emit dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack driver-core: Shut up dev_dbg_reatelimited() without DEBUG tools/hv: Parse /etc/os-release tools/hv: Check for read/write errors tools/hv: Fix exit() error code tools/hv: Fix file handle leak Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO Tools: hv: Rename the function kvp_get_ip_address() Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO Tools: hv: Add an example script to configure an interface ...
2012-10-01Merge tag 'char-misc-3.6' of ↵Linus Torvalds37-506/+821
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver merge from Greg Kroah-Hartman: "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge window. Nothing major, just a number of driver updates and fixes, all of which have been in the linux-next releases for a while now either in my tree, or in Andrew's (the lis3l driver changes came from his tree last week). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits) drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init drivers/misc/lis3lv02d: remove lis3lv02d driver DT init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code drivers/misc/lis3lv02d: add generic DT matching code lis3lv02d: fix some comments specific to lis331dlh driver MISC: hpilo, remove pci_disable_device pcmcia: synclink_cs: fix potential tty NULL dereference drivers/char/mmtimer.c: Remove useless kfree drivers/char: removes unnecessary semicolon char/misc: remove CONFIG_EXPERIMENTAL dependencies mei: don't print buffer as a string mei: struct mei_message_data doesn't have to be packed mei: add error messages for open count errors misc: use module_spi_driver tifm: use module_pci_driver misc/at25, dt: Improve at25 SPI eeprom device tree bindings. mei: add lynx point pci device ids mei: fix max number of open handles mei: rename struct pci_dev *mei_device to mei_pdev ...
2012-10-01Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds25-21/+4301
Pull clk framework update from Michael Turquette: "The common clk framework changes for 3.7 are dominated by ARM platform ports to the framework along with one MIPS port, one MFD port, one minor framework enhancement and one helper function for platforms expressing their clock data through device tree." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds96-1560/+929
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01Merge tag 'arm64-for-linus' of ↵Linus Torvalds3-0/+238
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 support from Catalin Marinas: "Linux support for the 64-bit ARM architecture (AArch64) Features currently supported: - 39-bit address space for user and kernel (each) - 4KB and 64KB page configurations - Compat (32-bit) user applications (ARMv7, EABI only) - Flattened Device Tree (mandated for all AArch64 platforms) - ARM generic timers" * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits) arm64: ptrace: remove obsolete ptrace request numbers from user headers arm64: Do not set the SMP/nAMP processor bit arm64: MAINTAINERS update arm64: Build infrastructure arm64: Miscellaneous header files arm64: Generic timers support arm64: Loadable modules arm64: Miscellaneous library functions arm64: Performance counters support arm64: Add support for /proc/sys/debug/exception-trace arm64: Debugging support arm64: Floating point and SIMD arm64: 32-bit (compat) applications support arm64: User access library functions arm64: Signal handling support arm64: VDSO support arm64: System calls handling arm64: ELF definitions arm64: SMP support arm64: DMA mapping API ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds42-1224/+4064
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The main new feature is machine support for System zEC12 including transactional memory, runtime instrumentation, support for scm block devices via eadm subchannels, and support for CEX4 crypto cards. In addition there are some nice improvements: bpf jit compiler, arch backend for cmpxchg_double, relative exception table entries, dasd partition detection independent from the dasd driver ioctls, and cpu cache information in /proc/cpuinfo and /sys/device/cpu. And last but not least a series of cleanup patches from Heiko." Fix up trivial add-add conflict in arch/s390/Kconfig due to commit b952741c8079 ("cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING") * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (76 commits) s390: update defconfig s390/jump label,nss: let shared kernel support depend on !JUMP_LABEL s390/disassembler: fix decoding of risblg instruction s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instruction s390/traps: move call to print_modules() out of show_regs() s390/mm: mark free_initrd_mem() as __init s390/dasd: check count address during online setting drivers/s390/char/monreader.c: fix error return code s390/cmpxchg,percpu: implement cmpxchg_double() s390/percpu: implement this_cpu_add_return() s390/percpu: implement this_cpu_xchg() s390/kexec: remove CONFIG_KEXEC s390/irq: use designated initializers for irq class array s390: add uninitialized_var() to suppress false positive compiler warnings s390/crashdump: move fill_cpu_elf_notes() prototype to header file s390/process: add missing header include s390/ptrace: add missing ifdef s390/ipl,decrompressor: disable branch profiling s390/perf_events: compile only for CONFIG_64BIT s390/tape: remove even more tape block leftovers ...
2012-10-01Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/fpu update from Ingo Molnar: "The biggest change is the addition of the non-lazy (eager) FPU saving support model and enabling it on CPUs with optimized xsaveopt/xrstor FPU state saving instructions. There are also various Sparse fixes" Fix up trivial add-add conflict in arch/x86/kernel/traps.c * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: fix kvm's usage of kernel_fpu_begin/end() x86, fpu: remove cpu_has_xmm check in the fx_finit() x86, fpu: make eagerfpu= boot param tri-state x86, fpu: enable eagerfpu by default for xsaveopt x86, fpu: decouple non-lazy/eager fpu restore from xsave x86, fpu: use non-lazy fpu restore for processors supporting xsave lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu() x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig() x86, fpu: drop_fpu() before restoring new state from sigframe x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels x86, fpu: Consolidate inline asm routines for saving/restoring fpu state x86, signal: Cleanup ifdefs and is_ia32, is_x32
2012-10-01Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds3-70/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/EFI changes from Ingo Molnar: "EFI loader robustness enhancements plus smaller fixes" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix the ACPI BGRT driver for images located in EFI boot services memory efi: Add a function to look up existing IO memory mappings efi: Defer freeing boot services memory until after ACPI init x86, EFI: Calculate the EFI framebuffer size instead of trusting the firmware efifb: Skip DMI checks if the bootloader knows what it's doing efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable efi: Build EFI stub with EFI-appropriate options X86: Improve GOP detection in the EFI boot stub
2012-10-01Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf update from Ingo Molnar: "Lots of changes in this cycle as well, with hundreds of commits from over 30 contributors. Most of the activity was on the tooling side. Higher level changes: - New 'perf kvm' analysis tool, from Xiao Guangrong. - New 'perf trace' system-wide tracing tool - uprobes fixes + cleanups from Oleg Nesterov. - Lots of patches to make perf build on Android out of box, from Irina Tirdea - Extend ftrace function tracing utility to be more dynamic for its users. It allows for data passing to the callback functions, as well as reading regs as if a breakpoint were to trigger at function entry. The main goal of this patch series was to allow kprobes to use ftrace as an optimized probe point when a probe is placed on an ftrace nop. With lots of help from Masami Hiramatsu, and going through lots of iterations, we finally came up with a good solution. - Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng. - Various tracing updates from Steve Rostedt - Clean up and improve 'perf sched' performance by elliminating lots of needless calls to libtraceevent. - Event group parsing support, from Jiri Olsa - UI/gtk refactorings and improvements from Namhyung Kim - Add support for non-tracepoint events in perf script python, from Feng Tang - Add --symbols to 'script', similar to the one in 'report', from Feng Tang. Infrastructure enhancements and fixes: - Convert the trace builtins to use the growing evsel/evlist tracepoint infrastructure, removing several open coded constructs like switch like series of strcmp to dispatch events, etc. Basically what had already been showcased in 'perf sched'. - Add evsel constructor for tracepoints, that uses libtraceevent just to parse the /format events file, use it in a new 'perf test' to make sure the libtraceevent format parsing regressions can be more readily caught. - Some strange errors were happening in some builds, but not on the next, reported by several people, problem was some parser related files, generated during the build, didn't had proper make deps, fix from Eric Sandeen. - Introduce struct and cache information about the environment where a perf.data file was captured, from Namhyung Kim. - Fix handling of unresolved samples when --symbols is used in 'report', from Feng Tang. - Add union member access support to 'probe', from Hyeoncheol Lee. - Fixups to die() removal, from Namhyung Kim. - Render fixes for the TUI, from Namhyung Kim. - Don't enable annotation in non symbolic view, from Namhyung Kim. - Fix pipe mode in 'report', from Namhyung Kim. - Move related stats code from stat to util/, will be used by the 'stat' kvm tool, from Xiao Guangrong. - Remove die()/exit() calls from several tools. - Resolve vdso callchains, from Jiri Olsa - Don't pass const char pointers to basename, so that we can unconditionally use libgen.h and thus avoid ifdef BIONIC lines, from David Ahern - Refactor hist formatting so that it can be reused with the GTK browser, From Namhyung Kim - Fix build for another rbtree.c change, from Adrian Hunter. - Make 'perf diff' command work with evsel hists, from Jiri Olsa. - Use the only field_sep var that is set up: symbol_conf.field_sep, fix from Jiri Olsa. - .gitignore compiled python binaries, from Namhyung Kim. - Get rid of die() in more libtraceevent places, from Namhyung Kim. - Rename libtraceevent 'private' struct member to 'priv' so that it works in C++, from Steven Rostedt - Remove lots of exit()/die() calls from tools so that the main perf exit routine can take place, from David Ahern - Fix x86 build on x86-64, from David Ahern. - {int,str,rb}list fixes from Suzuki K Poulose - perf.data header fixes from Namhyung Kim - Allow user to indicate objdump path, needed in cross environments, from Maciek Borzecki - Fix hardware cache event name generation, fix from Jiri Olsa - Add round trip test for sw, hw and cache event names, catching the problem Jiri fixed, after Jiri's patch, the test passes successfully. - Clean target should do clean for lib/traceevent too, fix from David Ahern - Check the right variable for allocation failure, fix from Namhyung Kim - Set up evsel->tp_format regardless of evsel->name being set already, fix from Namhyung Kim - Oprofile fixes from Robert Richter. - Remove perf_event_attr needless version inflation, from Jiri Olsa - Introduce libtraceevent strerror like error reporting facility, from Namhyung Kim - Add pmu mappings to perf.data header and use event names from cmd line, from Robert Richter - Fix include order for bison/flex-generated C files, from Ben Hutchings - Build fixes and documentation corrections from David Ahern - Assorted cleanups from Robert Richter - Let O= makes handle relative paths, from Steven Rostedt - perf script python fixes, from Feng Tang. - Initial bash completion support, from Frederic Weisbecker - Allow building without libelf, from Namhyung Kim. - Support DWARF CFI based unwind to have callchains when %bp based unwinding is not possible, from Jiri Olsa. - Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF section was the end goal, several fixes for code that handles all architectures and cleanups are included, from Cody Schafer. - Assorted fixes for Documentation and build in 32 bit, from Robert Richter - Cache the libtraceevent event_format associated to each evsel early, so that we avoid relookups, i.e. calling pevent_find_event repeatedly when processing tracepoint events. [ This is to reduce the surface contact with libtraceevents and make clear what is that the perf tools needs from that lib: so far parsing the common and per event fields. ] - Don't stop the build if the audit libraries are not installed, fix from Namhyung Kim. - Fix bfd.h/libbfd detection with recent binutils, from Markus Trippelsdorf. - Improve warning message when libunwind devel packages not present, from Jiri Olsa" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits) perf trace: Add aliases for some syscalls perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables perf tools: Check libaudit availability for perf-trace builtin perf hists: Add missing period_* fields when collapsing a hist entry perf trace: New tool perf evsel: Export the event_format constructor perf evsel: Introduce rawptr() method perf tools: Use perf_evsel__newtp in the event parser perf evsel: The tracepoint constructor should store sys:name perf evlist: Introduce set_filter() method perf evlist: Renane set_filters method to apply_filters perf test: Add test to check we correctly parse and match syscall open parms perf evsel: Handle endianity in intval method perf evsel: Know if byte swap is needed perf tools: Allow handling a NULL cpu_map as meaning "all cpus" perf evsel: Improve tracepoint constructor setup tools lib traceevent: Fix error path on pevent_parse_event perf test: Fix build failure trace: Move trace event enable from fs_initcall to core_initcall tracing: Add an option for disabling markers ...
2012-10-01Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds2-164/+92
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: 0. 'idle RCU': Adds RCU APIs that allow non-idle tasks to enter RCU idle mode and provides x86 code to make use of them, allowing RCU to treat user-mode execution as an extended quiescent state when the new RCU_USER_QS kernel configuration parameter is specified. (Work is in progress to port this to a few other architectures, but is not part of this series.) 1. A fix for a latent bug that has been in RCU ever since the addition of CPU stall warnings. This bug results in false-positive stall warnings, but thus far only on embedded systems with severely cut-down userspace configurations. 2. Further reductions in latency spikes for huge systems, along with additional boot-time adaptation to the actual hardware. This is a large change, as it moves RCU grace-period initialization and cleanup, along with quiescent-state forcing, from softirq to a kthread. However, it appears to be in quite good shape (famous last words). 3. Updates to documentation and rcutorture, the latter category including keeping statistics on CPU-hotplug latencies and fixing some initialization-time races. 4. CPU-hotplug fixes and improvements. 5. Idle-loop fixes that were omitted on an earlier submission. 6. Miscellaneous fixes and improvements In certain RCU configurations new kernel threads will show up (rcu_bh, rcu_sched), showing RCU processing overhead. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits) rcu: Apply micro-optimization and int/bool fixes to RCU's idle handling rcu: Userspace RCU extended QS selftest x86: Exit RCU extended QS on notify resume x86: Use the new schedule_user API on userspace preemption rcu: Exit RCU extended QS on user preemption rcu: Exit RCU extended QS on kernel preemption after irq/exception x86: Exception hooks for userspace RCU extended QS x86: Unspaghettize do_general_protection() x86: Syscall hooks for userspace RCU extended QS rcu: Switch task's syscall hooks on context switch rcu: Ignore userspace extended quiescent state by default rcu: Allow rcu_user_enter()/exit() to nest rcu: Settle config for userspace extended quiescent state rcu: Make RCU_FAST_NO_HZ handle adaptive ticks rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIs rcu: New rcu_user_enter() and rcu_user_exit() APIs ia64: Add missing RCU idle APIs on idle loop xtensa: Add missing RCU idle APIs on idle loop score: Add missing RCU idle APIs on idle loop parisc: Add missing RCU idle APIs on idle loop ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds66-3552/+4800
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: 1) Patchset from Henrik Rydberg which substantially reduces irqsoff latency for all input devices. In addition to that, Henrik reworked multitouch handling in order to reduce runtime memory consumption. This patchset touches code in Input subsystem as well. All the changes have been Acked by Dmitry, and we agreed to do it this way due to inter-dependencies between the patchset and subsequent changes in HID subsystem. 2) Rework, clenaups and a lot of fixes to picolcd driver by Bruno Prémont. 3) Core report descriptor handling fix which fixes resume issue on some devices, by Kevin Daughtridge 4) hidraw fixes by Alexey Khoroshilov and Ratan Nalumasu 5) wiimote driver now supports balance board, by David Herrmann. 6) Other smaller fixes and new device id additions all over the place. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (79 commits) HID: hidraw: don't deallocate memory when it is in use HID: picoLCD: optimize for inactive debugfs HID: multitouch: add support for GeneralTouch multi-touchscreen HID: Add support for Sony PS3 BD Remote Control HID: keep dev_rdesc unmodified and use it for comparisons HID: lg4ff: Minor coding style fixes in lg4ff and hid-lg HID: hid-lg4ff: Set absolute axes parametes on DFP HID: hid-lg4ff: Adjust X axis input value accordingly to selected range. HID: hid-lg4ff: Minor code cleanup to improve readability HID: ntrig: change default value of logical/physical width/height to 1 HID: picoLCD: bounds check in dump_buff_as_hex() Input: bcm5974 - Convert to MT-B Input: bcm5974 - Drop the logical dimensions Input: bcm5974 - Preparatory renames Input: bcm5974 - only setup button urb for TYPE1 devices HID: hid-multitouch: Add Flatfrog support HID: hid-multitouch: Fix contact count on 3M panels HID: hid-multitouch: Remove the redundant touch state HID: hid-multitouch: Simplify setup and frame synchronization HID: Allow more fields in the hid report ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds55-156/+106
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-10-01Merge tag 'regulator-3.7' of ↵Linus Torvalds32-491/+1250
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: - Support for putting regulators into bypass mode where they simply switch their input to the output (mainly used for low power retention). - A new API for setting voltages based on a voltage plus tolerance rather than an explicit voltage range. - Lots of cleanups and API updates from Axel Lin. - New driver for MAX8907. * tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits) regulator: arizona-ldo: Remove top voltage regulator: tps6586x: remove regulator-compatible from DT docs regulator: tps65217.txt: remove regulator-compatible from DT docs regulator: deprecate regulator-compatible DT property regulator: fan53555: remove vsel_max not used regulator: aat2870: Don't explicitly initialise the first field extcon: arizona: Use bypass mode for MICVDD regulator: wm831x-ldo: Add bypass support regulator: arizona-micsupp: Support get/set bypass regulator: arizona-ldo: Support get/set bypass regulator: core: Provide regmap get/set bypass operations regulator: core: Support bypass mode regulator: Fairchild fan53555 support regulator: twl: Remove another unused variable warning regulator: core: Try using the parent device for the default regmap regulator: core: Fast path non-deferred disables regulator: core: Report microvolts in sysfs even with only list_voltage() regulator: tps6586x: add support for SYS rail regulator: lp872x: remove unnecessary function regulator: lp872x: fix NULL pointer access problem ...
2012-10-01Merge tag 'regmap-3.7' of ↵Linus Torvalds3-26/+80
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A quiet release for the regmap core, essentially all the activity is in the shared interrupt controller which is being more and more widely used and has been enhanced to support a wider range of masking types and wake handling methods, plus integration with runtime PM for devices making aggressive use of that." * tag 'regmap-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: no need primary handler for nested irq regmap: irq: Add mask invert flag for enable register mfd: wm8994: Flag the interrupt block as requiring runtime PM be enabled regmap: irq: Enable devices for runtime PM while handling interrupts regmap: irq: initialize all irqs to wake disabled regmap: set MASK_ON_SUSPEND/SKIP_SET_WAKE if no wake_base regmap: name irq_chip based on regmap_irq_chip's name regmap: store irq_chip inside regmap_irq_chip_data regmap: irq: Only update mask bits when doing initial mask regmap: fix some error messages to take account of irq_reg_stride regmap: Don't lock in regmap_reinit_cache()
2012-10-01Merge branch 'multitouch' into for-linusJiri Kosina2-7/+65
Conflicts: drivers/hid/hid-multitouch.c
2012-10-01Merge branch 'upstream' into for-linusJiri Kosina31-229/+110
Conflicts: drivers/hid/usbhid/hid-quirks.c
2012-10-01Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', ↵Jiri Kosina321-4036/+6508
'uclogic', 'wacom' and 'wiimote' into for-linus
2012-10-01HID: hidraw: don't deallocate memory when it is in useRatan Nalumasu1-43/+26
When a device is unplugged, wait for all processes that have opened the device to close before deallocating the device. Signed-off-by: Ratan Nalumasu <ratan@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: picoLCD: optimize for inactive debugfsBruno Prémont1-1/+1
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when there is an active listener on debugfs for events. His change got lost while splitting hid_picolcd.c, restore it. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: multitouch: add support for GeneralTouch multi-touchscreenXianhan Yu2-1/+18
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and modify the driver for new GeneralTouch PWT touchscreen. Signed-off-by: Xianhan Yu <aroundight77@gmail.com> Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: Add support for Sony PS3 BD Remote ControlDavid Dillow5-1/+232
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01HID: keep dev_rdesc unmodified and use it for comparisonsKevin Daughtridge2-6/+16
The dev_rdesc member of the hid_device structure is meant to store the original report descriptor received from the device, but it is currently passed to any report_fixup method before it is copied to the rdesc member. This patch uses a temporary buffer to shield dev_rdesc from the side effects of many HID drivers' report_fixup implementations. usbhid's hid_post_reset checks the report descriptor currently returned by the device against a descriptor that may have been modified by a driver's report_fixup method. That leaves some devices nonfunctional after a resume, with a "reset_resume error 1" reported. This patch checks the new descriptor against the unmodified dev_rdesc instead and uses the original, instead of modified, report size. BugLink: http://bugs.launchpad.net/bugs/1049623 Signed-off-by: Kevin Daughtridge <kevin@kdau.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-29efi: Fix the ACPI BGRT driver for images located in EFI boot services memoryJosh Triplett2-69/+11
The ACPI BGRT driver accesses the BIOS logo image when it initializes. However, ACPI 5.0 (which introduces the BGRT) recommends putting the logo image in EFI boot services memory, so that the OS can reclaim that memory. Production systems follow this recommendation, breaking the ACPI BGRT driver. Move the bulk of the BGRT code to run during a new EFI late initialization phase, which occurs after switching EFI to virtual mode, and after initializing ACPI, but before freeing boot services memory. Copy the BIOS logo image to kernel memory at that point, and make it accessible to the BGRT driver. Rework the existing ACPI BGRT driver to act as a simple wrapper exposing that image (and the properties from the BGRT) via sysfs. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29Merge tag 'iommu-fixes-v3.6-rc7' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions
2012-09-29Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds1-50/+103
Pull NVMe driver fixes from Matthew Wilcox: "Now that actual hardware has been released (don't have any yet myself), people are starting to want some of these fixes merged." Willy doesn't have hardware? Guys... * git://git.infradead.org/users/willy/linux-nvme: NVMe: Cancel outstanding IOs on queue deletion NVMe: Free admin queue memory on initialisation failure NVMe: Use ida for nvme device instance NVMe: Fix whitespace damage in nvme_init NVMe: handle allocation failure in nvme_map_user_pages() NVMe: Fix uninitialized iod compiler warning NVMe: Do not set IO queue depth beyond device max NVMe: Set block queue max sectors NVMe: use namespace id for nvme_get_features NVMe: replace nvme_ns with nvme_dev for user admin NVMe: Fix nvme module init when nvme_major is set NVMe: Set request queue logical block size
2012-09-28Merge branch 'cleanup/__iomem' into next/cleanup2Arnd Bergmann5-10/+10
* cleanup/__iomem: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO Two new cleanup patches that were not already part of the first cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'bcmring/removal' into next/cleanup2Arnd Bergmann2-43/+42
From "Christian Daudt" <csd@broadcom.com>: Remove mach-bcmring as this is no longer maintained or used. Updated the removal with: - drop the edit to mach-types requested by Russell King - eliminate defconfig mod from patch 1 requested Olof Johansson Also switched to using git send-email to avoid word-wrapping problems * bcmring/removal: ARM: Remove mach-bcmring Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'bcmring/cleanup' into bcmring/removalArnd Bergmann2-43/+42
Doing a large-scale cleaning and removing the platform in another branch don't mix well, so do the trivial merge here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'clps711x/cleanup' into next/cleanup2Arnd Bergmann3-762/+0
Various cleanups for the clps711x platform from Alexander Shiyan <shc_work@mail.ru> via email: * clps711x/cleanup: ARM: clps711x: Remove board support for CEIVA ARM: clps711x: Fix register definitions ARM: clps711x: Fix lowlevel debug-macro ARM: clps711x: Added simple clock framework Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: clps711x: Remove board support for CEIVAAlexander Shiyan3-762/+0
The current kernel does not fit in the CEIVA ROM. Also, some functional has already been removed due migrate from 2.6 to 3.0, and it seems that no one uses this platform. So, remove support for this board and modules specific only to this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
2012-09-28mtdchar: fix offset overflow detectionLinus Torvalds1-6/+42
Sasha Levin has been running trinity in a KVM tools guest, and was able to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of the memory type). The call trace showed that it was mtdchar_mmap() that created an invalid remap_pfn_range(). The problem is that mtdchar_mmap() does various really odd and subtle things with the vma page offset etc, and uses the wrong types (and the wrong overflow) detection for it. For example, the page offset may well be 32-bit on a 32-bit architecture, but after shifting it up by PAGE_SHIFT, we need to use a potentially 64-bit resource_size_t to correctly hold the full value. Also, we need to check that the vma length plus offset doesn't overflow before we check that it is smaller than the length of the mtdmap region. This fixes things up and tries to make the code a bit easier to read. Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-15/+40
Pull networking fixes from David S Miller: 1) Netfilter xt_limit module can use uninitialized rules, from Jan Engelhardt. 2) Wei Yongjun has found several more spots where error pointers were treated as NULL/non-NULL and vice versa. 3) bnx2x was converted to pci_io{,un}map() but one remaining plain iounmap() got missed. From Neil Horman. 4) Due to a fence-post type error in initialization of inetpeer entries (which is where we store the ICMP rate limiting information), we can erroneously drop ICMPs if the inetpeer was created right around when jiffies wraps. Fix from Nicolas Dichtel. 5) smsc75xx resume fix from Steve Glendinnig. 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut. 7) qlcnic uses msleep() with locks held, fix from Narendra K. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netdev: octeon: fix return value check in octeon_mgmt_init_phy() inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check netfilter: xt_limit: have r->cost != 0 case work
2012-09-28Merge tag 'dm-3.6-fixes' of ↵Linus Torvalds6-78/+209
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm fixes from Alasdair G Kergon: "A few fixes for problems discovered during the 3.6 cycle. Of particular note, are fixes to the thin target's discard support, which I hope is finally working correctly; and fixes for multipath ioctls and device limits when there are no paths." * tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm verity: fix overflow check dm thin: fix discard support for data devices dm thin: tidy discard support dm: retain table limits when swapping to new table with no devices dm table: clear add_random unless all devices have it set dm: handle requests beyond end of device instead of using BUG_ON dm mpath: only retry ioctl when no paths if queue_if_no_path set dm thin: do not set discard_zeroes_data
2012-09-28iommu/amd: Fix wrong assumption in iommu-group specific codeJoerg Roedel1-2/+4
The new IOMMU groups code in the AMD IOMMU driver makes the assumption that there is a pci_dev struct available for all device-ids listed in the IVRS ACPI table. Unfortunatly this assumption is not true and so this code causes a NULL pointer dereference at boot on some systems. Fix it by making sure the given pointer is never NULL when passed to the group specific code. The real fix is larger and will be queued for v3.7. Reported-by: Florian Dazinger <florian@dazinger.net> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown32-491/+1250
'regulator/topic/bypass', 'regulator/topic/tol', 'regulator/topic/drivers' and 'regulator/topic/tps6586x' into regulator-next
2012-09-28regulator: arizona-ldo: Remove top voltageMark Brown1-1/+1
The highest voltage step is not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28netdev: octeon: fix return value check in octeon_mgmt_init_phy()Wei Yongjun1-3/+1
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-4/+14
Pull drm fixes from Dave Airlie: "The three nouveau fixes quiten unneeded dmesg spam that people are seeing and pondering, The udl fix stops it from trying to driver monitors that are too big, where we get a black screen. And a vmware memory alloc problem." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN drm/udl: limit modes to the sku pixel limits. vmwgfx: corruption in vmw_event_fence_action_create() drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace