summaryrefslogtreecommitdiffstats
path: root/drivers/xen
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03Merge tag 'for-linus-5.7-rc1-tag' of ↵Linus Torvalds3-89/+47
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a cleanup patch removing an unused function - a small fix for the xen pciback driver - a series for making the unwinder hyppay with the Xen PV guest idle task stacks * tag 'for-linus-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Make the secondary CPU idle tasks reliable x86/xen: Make the boot CPU idle task reliable xen-pciback: fix INTERRUPT_TYPE_* defines xen/xenbus: remove unused xenbus_map_ring()
2020-03-30Merge tag 'smp-core-2020-03-30' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
2020-03-30xen-pciback: fix INTERRUPT_TYPE_* definesMarek Marczykowski-Górecki2-5/+5
xen_pcibk_get_interrupt_type() assumes INTERRUPT_TYPE_NONE being 0 (initialize ret to 0 and return as INTERRUPT_TYPE_NONE). Fix the definition to make INTERRUPT_TYPE_NONE really 0, and also shift other values to not leave holes. But also, do not assume INTERRUPT_TYPE_NONE being 0 anymore to avoid similar confusions in the future. Fixes: 476878e4b2be ("xen-pciback: optionally allow interrupt enable flag writes") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-30xen/xenbus: remove unused xenbus_map_ring()Juergen Gross1-84/+42
xenbus_map_ring() is used nowhere in the tree, remove it. xenbus_unmap_ring() is used only locally, so make it static and move it up. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-25xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()Qais Yousef1-1/+1
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down() a private interface of the cpu subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200323135110.30522-14-qais.yousef@arm.com
2020-03-05xen/xenbus: fix lockingJuergen Gross2-7/+8
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200305100323.16736-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xenbus: req->err should be updated before req->stateDongli Zhang1-0/+2
This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.com Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xenbus: req->body should be updated before req->stateDongli Zhang2-3/+8
The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Link: https://lore.kernel.org/r/20200303221423.21962-1-dongli.zhang@oracle.com Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-02-21Merge tag 'for-linus-5.6-rc3-tag' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two small fixes for Xen: - a fix to avoid warnings with new gcc - a fix for incorrectly disabled interrupts when calling _cond_resched()" * tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Enable interrupts when calling _cond_resched() x86/xen: Distribute switch variables for initialization
2020-02-20xen: Enable interrupts when calling _cond_resched()Thomas Gleixner1-1/+3
xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-02-05Merge tag 'for-linus-5.6-rc1-tag' of ↵Linus Torvalds10-14/+277
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-23/+0
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-29xenbus/backend: Protect xenbus callback with lockSeongJae Park2-3/+15
A driver's 'reclaim_memory' callback can race with 'probe' or 'remove' because it will be called whenever memory pressure is detected. To avoid such race, this commit embeds a spinlock in each 'xenbus_device' and make 'xenbus' to hold the lock while the corresponded callbacks are running. Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-01-29xenbus/backend: Add memory pressure handler callbackSeongJae Park1-0/+32
Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility. To mitigate such problems, this commit adds a memory reclaim callback to 'xenbus_driver'. If a memory pressure is detected, 'xenbus' requests every backend driver to volunarily release its memory. Note that it would be able to improve the callback facility for more sophisticated handlings of general pressures. For example, it would be possible to monitor the memory consumption of each device and issue the release requests to only devices which causing the pressure. Also, the callback could be extended to handle not only memory, but general resources. Nevertheless, this version of the implementation defers such sophisticated goals as a future work. Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-01-28xen/gntdev: Do not use mm notifiers with autotranslating guestsBoris Ostrovsky1-12/+12
Commit d3eeb1d77c5d ("xen/gntdev: use mmu_interval_notifier_insert") missed a test for use_ptemod when calling mmu_interval_read_begin(). Fix that. Fixes: d3eeb1d77c5d ("xen/gntdev: use mmu_interval_notifier_insert") CC: stable@vger.kernel.org # 5.5 Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Tested-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Juergen Gross <jgross@suse.com>
2020-01-22xen/balloon: Support xend-based toolstack take twoJuergen Gross1-1/+1
Commit 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack") tried to fix a regression with running on rather ancient Xen versions. Unfortunately the fix was based on the assumption that xend would just use another Xenstore node, but in reality only some downstream versions of xend are doing that. The upstream xend does not write that Xenstore node at all, so the problem must be fixed in another way. The easiest way to achieve that is to fall back to the behavior before commit 96edd61dcf4436 ("xen/balloon: don't online new memory initially") in case the static memory maximum can't be read. This is achieved by setting static_max to the current number of memory pages known by the system resulting in target_diff becoming zero. Fixes: 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> # 4.13 Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie5-33/+33
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-15xen-pciback: optionally allow interrupt enable flag writesMarek Marczykowski-Górecki6-0/+219
QEMU running in a stubdom needs to be able to set INTX_DISABLE, and the MSI(-X) enable flags in the PCI config space. This adds an attribute 'allow_interrupt_control' which when set for a PCI device allows writes to this flag(s). The toolstack will need to set this for stubdoms. When enabled, guest (stubdomain) will be allowed to set relevant enable flags, but only one at a time - i.e. it refuses to enable more than one of INTx, MSI, MSI-X at a time. This functionality is needed only for config space access done by device model (stubdomain) serving a HVM with the actual PCI device. It is not necessary and unsafe to enable direct access to those bits for PV domain with the device attached. For PV domains, there are separate protocol messages (XEN_PCI_OP_{enable,disable}_{msi,msix}) for this purpose. Those ops in addition to setting enable bits, also configure MSI(-X) in dom0 kernel - which is undesirable for PCI passthrough to HVM guests. This should not introduce any new security issues since a malicious guest (or stubdom) can already generate MSIs through other ways, see [1] page 8. Additionally, when qemu runs in dom0, it already have direct access to those bits. This is the second iteration of this feature. First was proposed as a direct Xen interface through a new hypercall, but ultimately it was rejected by the maintainer, because of mixing pciback and hypercalls for PCI config space access isn't a good design. Full discussion at [2]. [1]: https://invisiblethingslab.com/resources/2011/Software%20Attacks%20on%20Intel%20VT-d.pdf [2]: https://xen.markmail.org/thread/smpgpws4umdzizze [part of the commit message and sysfs handling] Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> [the rest] Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> [boris: A few small changes suggested by Roger, some formatting changes] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar10-96/+79
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-21Merge tag 'for-linus-5.5b-rc3-tag' of ↵Linus Torvalds5-33/+33
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two cleanup patches and a small series for supporting reloading the Xen block backend driver" * tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/grant-table: remove multiple BUG_ON on gnttab_interface xen-blkback: support dynamic unbind/bind xen/interface: re-define FRONT/BACK_RING_ATTACH() xenbus: limit when state is forced to closed xenbus: move xenbus_dev_shutdown() into frontend code... xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk
2019-12-20xen/grant-table: remove multiple BUG_ON on gnttab_interfaceAditya Pakki1-4/+0
gnttab_request_version() always sets the gnttab_interface variable and the assertions to check for empty gnttab_interface is unnecessary. The patch eliminates multiple such assertions. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xenbus: limit when state is forced to closedPaul Durrant1-2/+10
If a driver probe() fails then leave the xenstore state alone. There is no reason to modify it as the failure may be due to transient resource allocation issues and hence a subsequent probe() may succeed. If the driver supports re-binding then only force state to closed during remove() only in the case when the toolstack may need to clean up. This can be detected by checking whether the state in xenstore has been set to closing prior to device removal. NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver, which defaults to false. Subsequent patches will add support to some backend drivers. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xenbus: move xenbus_dev_shutdown() into frontend code...Paul Durrant4-27/+23
...and make it static xenbus_dev_shutdown() is seemingly intended to cause clean shutdown of PV frontends when a guest is rebooted. Indeed the function waits for a conpletion which is only set by a call to xenbus_frontend_closed(). This patch removes the shutdown() method from backends and moves xenbus_dev_shutdown() from xenbus_probe.c into xenbus_probe_frontend.c, renaming it appropriately and making it static. NOTE: In the case where the backend is running in a driver domain, the toolstack should have already terminated any frontends that may be using it (since Xen does not support re-startable PV driver domains) so xenbus_dev_shutdown() should never be called. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter1-23/+0
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-15Merge tag 'for-linus-5.5b-rc2-tag' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fixes: one for a resource accounting bug in some configurations and a fix for another patch which went into rc1" * tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix ballooned page accounting without hotplug enabled xen-blkback: prevent premature module unload
2019-12-13xen/balloon: fix ballooned page accounting without hotplug enabledJuergen Gross1-1/+2
When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined reserve_additional_memory() will set balloon_stats.target_pages to a wrong value in case there are still some ballooned pages allocated via alloc_xenballooned_pages(). This will result in balloon_process() no longer be triggered when ballooned pages are freed in batches. Reported-by: Nicholas Tsirakis <niko.tsirakis@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-08sched/rt, xen: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the preempt anand xen-ops code over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lore.kernel.org/r/20191015191821.11479-23-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-07Merge tag 'for-linus-5.5b-rc1-tag' of ↵Linus Torvalds5-62/+44
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a patch to fix a build warning - a cleanup of no longer needed code in the Xen event handling - a small series for the Xen grant driver avoiding high order allocations and replacing an insane global limit by a per-call one - a small series fixing Xen frontend/backend module referencing * tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: allow module to be cleanly unloaded xen/xenbus: reference count registered modules xen/gntdev: switch from kcalloc() to kvcalloc() xen/gntdev: replace global limit of mapped pages by limit per call xen/gntdev: remove redundant non-zero check on ret xen/events: remove event handling recursion detection
2019-12-04xen/xenbus: reference count registered modulesPaul Durrant1-1/+12
To prevent a PV driver module being removed whilst attached to its other end, and hence xenbus calling into potentially invalid text, take a reference on the module before calling the probe() method (dropping it if unsuccessful) and drop the reference after returning from the remove() method. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-02xen/gntdev: switch from kcalloc() to kvcalloc()Juergen Gross1-15/+16
With sufficient many pages to map gntdev can reach order 9 allocation sizes. As there is no need to have physically contiguous buffers switch to kvcalloc() in order to avoid failing allocations. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-02xen/gntdev: replace global limit of mapped pages by limit per callJuergen Gross3-26/+11
Today there is a global limit of pages mapped via /dev/xen/gntdev set to 1 million pages per default. There is no reason why that limit is existing, as total number of grant mappings is limited by the hypervisor anyway and preferring kernel mappings over userspace ones doesn't make sense. It should be noted that the gntdev device is usable by root only. Additionally checking of that limit is fragile, as the number of pages to map via one call is specified in a 32-bit unsigned variable which isn't tested to stay within reasonable limits (the only test is the value to be <= zero, which basically excludes only calls without any mapping requested). So trying to map e.g. 0xffff0000 pages while already nearly 1000000 pages are mapped will effectively lower the global number of mapped pages such that a parallel call mapping a reasonable amount of pages can succeed in spite of the global limit being violated. So drop the global limit and introduce per call limit instead. This per call limit (default: 65536 grant mappings) protects against allocating insane large arrays in the kernel for doing a hypercall which will fail anyway in case a user is e.g. trying to map billions of pages. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-02xen/gntdev: remove redundant non-zero check on retColin Ian King1-7/+2
The non-zero check on ret is always going to be false because ret was initialized as zero and the only place it is set to non-zero contains a return path before the non-zero check. Hence the check is redundant and can be removed. [ jgross@suse.com: limit scope of ret ] Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-02xen/events: remove event handling recursion detectionJuergen Gross1-13/+3
__xen_evtchn_do_upcall() contains guards against being called recursively. This mechanism was introduced in the early pvops times (kernel 2.6.26) when there were all the Xen backend drivers missing from the upstream kernel, and some of those out-of-tree drivers were enabling interrupts in their event handlers (which was explicitly allowed in the initial XenoLinux). Nowadays we don't need to support those old drivers any more and the capability to allow recursive calls of __xen_evtchn_do_upcall() can be removed. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-01mm/memory_hotplug.c: remove __online_page_set_limits()Souptick Joarder1-1/+0
__online_page_set_limits() is a dummy function - remove it and all callers. Link: http://lkml.kernel.org/r/8e1bc9d3b492f6bde16e95ebc1dee11d6aefabd7.1567889743.git.jrdr.linux@gmail.com Link: http://lkml.kernel.org/r/854db2cf8145d9635249c95584d9a91fd774a229.1567889743.git.jrdr.linux@gmail.com Link: http://lkml.kernel.org/r/9afe6c5a18158f3884a6b302ac2c772f3da49ccc.1567889743.git.jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-30Merge tag 'for-linus-hmm' of ↵Linus Torvalds2-138/+49
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-25xen/gntdev-dmabuf: Ditch dummy map functionsDaniel Vetter1-23/+0
There's no in-kernel users for the k(un)map stuff. And the mmap one is actively harmful - return 0 and then _not_ actually mmaping can't end well. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-14-daniel.vetter@ffwll.ch
2019-11-24xen: Fix Kconfig indentationKrzysztof Kozlowski1-29/+29
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-23xen/gntdev: use mmu_interval_notifier_insertJason Gunthorpe2-138/+49
gntdev simply wants to monitor a specific VMA for any notifier events, this can be done straightforwardly using mmu_interval_notifier_insert() over the VMA's VA range. The notifier should be attached until the original VMA is destroyed. It is unclear if any of this is even sane, but at least a lot of duplicate code is removed. Link: https://lore.kernel.org/r/20191112202231.3856-15-jgg@ziepe.ca Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-20xen-platform: Convert to generic power managementBjorn Helgaas1-5/+9
Convert xen-platform from the legacy PCI power management callbacks to the generic operations. This is one step towards removing support for the legacy PCI callbacks. The generic .resume_noirq() operation is called by pci_pm_resume_noirq() at the same point the legacy PCI .resume_early() callback was, so this patch should not change the xen-platform behavior. Link: https://lore.kernel.org/r/20191101204558.210235-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: KarimAllah Ahmed <karahmed@amazon.de>
2019-11-20dma-direct: exclude dma_direct_map_resource from the min_low_pfn checkChristoph Hellwig1-2/+2
The valid memory address check in dma_capable only makes sense when mapping normal memory, not when using dma_map_resource to map a device resource. Add a new boolean argument to dma_capable to exclude that check for the dma_map_resource case. Fixes: b12d66278dd6 ("dma-direct: check for overflows on 32 bit DMA addresses") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-4/+4
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-14xen/mcelog: also allow building for 32-bit kernelsJan Beulich1-1/+1
There's no apparent reason why it can be used on 64-bit only. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-14xen/mcelog: add PPIN to record when availableJan Beulich1-0/+5
This is to augment commit 3f5a7896a5 ("x86/mce: Include the PPIN in MCE records when available"). I'm also adding "synd" and "ipid" fields to struct xen_mce, in an attempt to keep field offsets in sync with struct mce. These two fields won't get populated for now, though. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-14xen/mcelog: drop __MC_MSR_MCGCAPJan Beulich1-2/+7
It has never been part of Xen's public interface, and there's therefore no guarantee for MCG_CAP's value to always be present in array entry 0. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-07xen/gntdev: Use select for DMA_SHARED_BUFFERJason Gunthorpe1-1/+2
DMA_SHARED_BUFFER can not be enabled by the user (it represents a library set in the kernel). The kconfig convention is to use select for such symbols so they are turned on implicitly when the user enables a kconfig that needs them. Otherwise the XEN_GNTDEV_DMABUF kconfig is overly difficult to enable. Fixes: 932d6562179e ("xen/gntdev: Add initial support for dma-buf UAPI") Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-12Merge tag 'for-linus-5.4-rc3-tag' of ↵Linus Torvalds2-13/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - correct panic handling when running as a Xen guest - cleanup the Xen grant driver to remove printing a pointer being always NULL - remove a soon to be wrong call of of_dma_configure() * tag 'for-linus-5.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Stop abusing DT of_dma_configure API xen/grant-table: remove unnecessary printing x86/xen: Return from panic notifier